Skip to content
Clear turquoise backyard pool with sunlight rippling on a white plaster floor
Pool care: water chemistry reference

Pool Chemical Levels Chart: Ideal Ranges From the CDC, the MAHC and Three State Codes

This pool chemical levels chart puts six authorities side by side; home targets are free chlorine 2 to 4 ppm, pH 7.4 to 7.6, alkalinity 80 to 120 ppm and stabilizer 30 to 50 ppm.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓17 readings, six authoritiesCDC, the 2024 MAHC, the PHTA guideline and the Florida, California and Texas rules, with section numbers.
  • ✓Printable chartsOne chart for chlorine pools and one for salt water pools, each with what to add when a reading is low or high.
  • ✓Salt by chlorinatorFive manuals put salt anywhere from 2,700 to 4,500 ppm, so the salt chart shows the range and the strictest maker.
Quick answer
For a home chlorine pool, keep free chlorine at 2 to 4 ppm (never under 1 ppm, or 2 ppm with stabilizer, per CDC), combined chlorine at 0.2 ppm or less, pH at 7.4 to 7.6, alkalinity at 80 to 120 ppm, calcium hardness at 200 to 400 ppm on plaster and cyanuric acid at 30 to 50 ppm.
1 ppm; 2 ppm with CYA
Free chlorine minimum
Source: CDC
7.0 to 7.8
pH, public pools
90 ppm (MAHC), 100 ppm (FL, CA, TX)
Stabilizer cap
4 ppm free chlorine
Swim ceiling on labels

Key takeaways

Pool chemical levels chart: 17 readings, six authorities

The master chart below lists 17 readings and the number each authority sets: CDC guidance for home pools, the 2024 MAHC for public pools that adopt it, the PHTA industry guideline, and the Florida, California and Texas public pool rules with section numbers. The first column is the PC&S home target, chosen to sit inside every column.

Pool chemical levels chart: home target and the limit set by six authorities (checked November 2, 2026)
ReadingHome target (PC&S pick)CDC home pools2024 MAHC (public pools)PHTA guideline: min / ideal / maxFlorida 64E-9.004California 22 CCRTexas 25 TAC 265.193(c)
Free chlorine (ppm)2 to 41 minimum; 2 with cyanuric acid1.0 minimum, 2.0 with CYA; max per label; over 10 with swimmers closes1.0 / 2.0 to 4.0 / 5.01 to 10 (indoor pools: 5 max)1.0 to 10.0; 2.0 to 10.0 with CYA (65529)1.0 / 2.0 to 3.0 / 8.0
Combined chlorine (ppm)0 to 0.2Not setAct above 0.4 (5.7.4.4.2)0 / 0 / 0.2Not setNot set0.4 maximum
Bromine (ppm)4 to 6Not set for pools3.0 minimum, 8.0 maximum (5.7.3.1.2)2.0 / 4.0 to 6.0 / 10.01.5 to 62.0 minimum (65529)3.0 / 4.0 to 6.0 / 10.0
pH7.4 to 7.67.0 to 7.87.0 to 7.8 (5.7.3.4.1); below 6.5 or above 8.0 closes7.2 / 7.4 to 7.6 / 7.87.0 to 7.87.2 to 7.8 (65530)7.0 / 7.2 to 7.6 / 7.8
Total alkalinity (ppm)80 to 120Not set60 to 180 (5.7.4.4.1)60 / 80 to 100 with hypochlorite, 100 to 120 with trichlor or dichlor / 180Test kit required; no rangeNot set60 / 60 to 180 / over 180
Calcium hardness (ppm)200 to 400 on plaster; vinyl and fiberglass per makerNot set2,500 maximum (5.7.4.4.3); Annex: 200 to 400 plaster, 80 to 200 vinyl or fiberglass150 / 200 to 400 / 1,000Test kit required; no rangeNot set150 / over 150 to 400 / 1,000
Cyanuric acid (ppm)30 to 50No number; keep chlorine at 2 when used90 maximum (5.7.3.1.3.2); 300 closes0 / 30 to 50 / per code, typically 100100 maximum, 40 recommended maximum; spas 40100 maximum (65530)None / 30 to 50 / 100
Salt (ppm)Your cell's range (2,700 to 4,500 across five manuals)Not setMaker's range (5.7.3.1.5.2); test weekly (5.7.5.11)Not listedTest kit required if fedNot setNot set
Total dissolved solids (ppm)Under 1,500 above start-upNot setTest quarterly (5.7.5.9); Annex: 1,500 above fill water1,500 over start-upNot setNot setNot set
Phosphates (ppb)Under 125 if algae keeps returningNot setNot setNot listedNot setNot setNot set
Borates (ppm)30 to 50 if you use themNot setNot setNot listedNot setNot setNot set
Copper (ppm)0; 0.2 to 0.4 with an ionizerNot set1.3 maximum with ion systems (5.7.3.2.3.2)None1 maximumNot setNot set
Silver (ppm)0.10 or lessNot set0.10 maximum (5.7.3.2.3.2)None0.1 maximumNot setNot set
Iron (ppm)0 (EPA staining guide: 0.3)Not setNot setNoneNot setNot setNot set
Water temperature (F)104 maximumNot set for pools104 maximum (5.7.4.7.2)78 to 82 for competition; 104 maximumNot set104 maximum (65530)Not set
Saturation index (LSI)0.0 to +0.3Not setBalanced (5.7.4.6); Annex: minus 0.3 to plus 0.3; check monthlyNot listedNot setNot setBalance test every 10 days (265.193(k))
ORP (mV)Not needed at homeNot setRecorded with each test if installed (5.7.5.4)Calibrate to sanitizer700 to 850 where controllers are requiredNot set600 / 650 to 750 / 900

Sources: CDC (May 10, 2024); 2024 MAHC Code and Annex; PHTA table via Taylor (reviewed Aug 12, 2026); Fla. Admin. Code 64E-9.004 (eff. June 11, 2023); 22 CCR 65529 and 65530; 25 TAC 265.193; EPA secondary standards; HTH; EPA label 57787-27. Download CSV

Printable pool chemical levels chart for chlorine pools: home targets, what to add when low or high, and the 2024 MAHC public pool limit for each reading. Built by PC&S from the table above, November 2026.
Printable pool chemical levels chart for chlorine pools: home targets, what to add when low or high, and the 2024 MAHC public pool limit for each reading. Built by PC&S from the table above, November 2026.

How the home target was picked: we took the PHTA ideal band, checked that it sits inside the Florida, California and Texas ranges, and used CDC minimums as floors. Free chlorine stops at 4 ppm because the HTH Granular 73 label (EPA Reg. No. 1258-1239) and Hasachlor both bar re-entry above it, even though the MAHC, Florida and California allow up to 10 ppm.

What do you do when a reading is low or high?

Each reading has one standard fix in each direction. Low chlorine takes chlorine (10 fl oz of 12.5% liquid per ppm in 10,000 gallons), high pH takes acid, high cyanuric acid, salt, TDS and hardness take a partial drain, and high combined chlorine takes a shock. The table gives the fix and the rule behind it; the linked guides give doses by pool size.

What to do when a pool chemical reading is low or high
ReadingIf it is lowIf it is highRule behind the fix
Free chlorineAdd chlorine: 10 fl oz of 12.5% liquid chlorine raises 10,000 gallons about 1 ppmStop dosing and let sun and swimmers use it up; no swimming above 4 ppm on many labelsHasachlor label 10897-26 dose chart and re-entry line
Combined chlorineNothing to doShock (superchlorinate), exchange water, shower before swimmingMAHC 5.7.4.4.2 lists those three actions above 0.4 ppm
pHAdd soda ash or sodium bicarbonateAdd muriatic acid, sodium bisulfate or carbon dioxideMAHC 5.7.3.4.2 list of approved pH chemicals
Total alkalinityAdd sodium bicarbonate: 1.5 lb raises 10,000 gallons about 10 ppmAdd acid in doses, then aerate to lift pHProduct labels and Florida DOH, via PC&S alkalinity guides
Calcium hardnessAdd calcium chloride in 10 lb steps (NPC start-up card)Partial drain and refill with softer waterMAHC Annex: lowering hardness is not always possible with hard fill water
Cyanuric acidAdd stabilizer through the skimmerPartial drain: replace 1 minus target / current of the waterMAHC 5.7.3.1.3.2 cap of 90 ppm; dilution arithmetic
SaltAdd pool salt: pounds = ppm needed x gallons x 8.34 / 1,000,000Dilute with fresh waterWater weighs 8.34 lb per gallon; chlorinator manuals
Total dissolved solidsNothing to doPartial drain and refillMAHC Annex 5.7.4.6: 1,500 ppm above fill water
PhosphatesNothing to doPhosphate remover per label: HTH lists 16 fl oz per 10,000 gallons at 1,000 ppbHTH Phosphate Remover dosage guide
Copper or ironNothing to doStop copper sources, test fill water, treat stains, add a sequestrantMAHC Annex 5.7.3.2.3; EPA secondary standards

Sources: EPA label 10897-26; MAHC 5.7.3.4.2, 5.7.4.4.2, 5.7.3.1.3.2; MAHC Annex 5.7.4.6; NPC start-up card; HTH; EPA. Download CSV

What should free chlorine, combined chlorine and bromine be?

Keep free chlorine at 2 to 4 ppm in a home pool, combined chlorine at 0.2 ppm or less, and bromine at 4 to 6 ppm. Codes set wider legal ranges: free chlorine may run from 1.0 to 10.0 ppm in Florida and California public pools and 1.0 to 8.0 ppm in Texas, but most chlorine labels bar swimming above 4 ppm.

Allowed free chlorine range by authority (ppm), 2026Bar = minimum to maximum; dot = middle of the stated ideal band
Allowed free chlorine range by authority (ppm), 2026Range chart: free chlorine allowed runs 1 to 4 ppm on chlorine labels, 1 to 5 PHTA, 1 to 8 Texas and 1 to 10 under the MAHC, Florida and California; CDC asks for 2 ppm with stabilizer.02.557.510CDC home pools (with CYA): 2 to 2, point 2CDC home pools (with CYA)Typical chlorine label (re-entry): 1 to 4Typical chlorine label (re-entry)PHTA guideline: 1 to 5, point 3PHTA guidelineTexas 25 TAC 265.193: 1 to 8, point 2.5Texas 25 TAC 265.1932024 MAHC (closure above): 1 to 102024 MAHC (closure above)Florida 64E-9.004: 1 to 10Florida 64E-9.004California 22 CCR 65529: 1 to 10California 22 CCR 65529

Source: CDC (May 10, 2024); 2024 MAHC 5.7.3.1.1.2 and 6.6.3.1; PHTA via Taylor (Aug 12, 2026); 64E-9.004; 22 CCR 65529; 25 TAC 265.193; EPA labels 10897-26, 1258-1239. Download chart data (CSV)

The floor moves with stabilizer. CDC and MAHC 5.7.3.1.1.2 both lift the minimum from 1 ppm to 2 ppm once cyanuric acid is in the water, and MAHC 6.6.3.1 treats a cyanuric acid to free chlorine ratio above 45 to 1 as an imminent hazard. At 50 ppm stabilizer that line sits at 1.1 ppm free chlorine; at 90 ppm it sits at 2.0 ppm. The chlorine and stabilizer math is worked through in our cyanuric acid guide.

Combined chlorine is total chlorine minus free chlorine, and it is the reading behind the chlorine smell. The MAHC acts above 0.4 ppm, Texas caps it at 0.4 ppm and the PHTA guideline at 0.2 ppm. In a 2025 survey summarized in our pool hygiene statistics report, 77% of respondents blamed red, stinging eyes on too much chlorine; CDC attributes them to chloramines.

Bromine reads higher than chlorine for the same job. The MAHC sets 3.0 ppm minimum and 8.0 ppm maximum for pools, Texas sets an ideal of 4.0 to 6.0 ppm, and Florida allows 1.5 to 6 mg/L in conventional pools. Hot tubs differ again: the MAHC sets 4.00 ppm bromine and 3.0 ppm chlorine minimums for spas.

What pH and total alkalinity should a pool have?

Aim for pH 7.4 to 7.6 and total alkalinity of 80 to 120 ppm. Every authority on the chart caps pH at 7.8; the floor is 7.0 in CDC guidance, the MAHC, Florida and Texas, and 7.2 in California 65530. Public pools close below pH 6.5 or above 8.0 under MAHC 6.6.3.1.

Alkalinity has the widest legal band: 60 to 180 ppm in MAHC 5.7.4.4.1 and Texas. The PHTA guideline narrows the ideal by sanitizer: 80 to 100 ppm with calcium, lithium or sodium hypochlorite, because they push pH up, and 100 to 120 ppm with trichlor or dichlor, which push it down. Florida’s rule names no range but requires an alkalinity test kit under 64E-9.004(10).

Stabilizer distorts the alkalinity reading. The MAHC Annex deducts 30% of the cyanuric acid reading from total alkalinity before computing the saturation index; the National Plasterers Council card deducts one third. At 40 ppm cyanuric acid the two rules subtract 12 ppm and 13.3 ppm.

How much cyanuric acid and calcium hardness is too much?

Cyanuric acid tops out at 90 ppm in the MAHC and 100 ppm in Florida, California and Texas, with 30 to 50 ppm as the shared ideal. Calcium hardness may legally reach 2,500 ppm under the MAHC and 1,000 ppm in Texas, but 200 to 400 ppm is the plaster target in both the PHTA guideline and the MAHC Annex.

Cyanuric acid (stabilizer) maximum by authority, ppm, 2026
Cyanuric acid (stabilizer) maximum by authority, ppm, 2026Bar chart: cyanuric acid maximum is 40 ppm for Florida spas and Florida's recommended pool level, 90 ppm under the MAHC and 100 ppm in Florida, California, Texas and the PHTA guideline.Florida spas: 40Florida spas40Florida pools (recommended): 40Florida pools (recommended)402024 MAHC: 902024 MAHC90Florida pools (rule): 100Florida pools (rule)100California 65530: 100California 65530100Texas 265.193: 100Texas 265.193100PHTA (typical code): 100PHTA (typical code)100

Source: 2024 MAHC 5.7.3.1.3.2; Florida 64E-9.004(1)(d)4; 22 CCR 65530; 25 TAC 265.193(c); PHTA via Taylor. Download chart data (CSV)

Surface decides the hardness target. The MAHC Annex gives 200 to 400 ppm for plaster and 80 to 200 ppm for vinyl or fiberglass, and fiberglass makers publish their own numbers, compared maker by maker in our calcium hardness guide. The National Plasterers Council warns that 100 ppm or more of cyanuric acid may permanently damage plaster.

Balance ties hardness, pH, alkalinity and temperature together in the Langelier saturation index. The MAHC Annex calls minus 0.3 to plus 0.3 balanced and prefers a small positive value; the NPC asks for 0.0 to plus 0.3 on plaster; Texas 265.193(k) requires a balance test at least every 10 days at public pools.

Salt water pool chemical levels chart

A salt water pool uses the same chart with three changes: salt goes to the range printed on your chlorinator, from 2,700 to 3,400 ppm on Hayward AquaRite 900 to 3,600 to 4,500 ppm on Pentair IntelliChlor; alkalinity sits at the low end, 80 to 100 ppm; and TDS is measured after salting as the new baseline.

Salt water pool chemical levels chart: PC&S target and the range across five chlorinator manuals
ReadingSalt pool target (PC&S pick)Range across five chlorinator manualsStrictest manualDiffers from the chlorine pool chart?
Salt (ppm)The range printed on your cell2,700 to 4,500Jandy AquaPure: 3,000 to 3,500Yes: no code sets it; Pentair IntelliChlor wants 3,600 to 4,500, Hayward AquaRite 900 2,700 to 3,400
Free chlorine (ppm)2 to 31.0 to 4.0Hayward, Jandy, CircuPool: 1.0 to 3.0Slightly lower ceiling than the chlorine chart
pH7.4 to 7.67.2 to 7.8Jandy and AutoPilot: 7.4 to 7.6No, but salt cells push pH up, so test it more often
Total alkalinity (ppm)80 to 10080 to 120AutoPilot Digital Nano: 80 to 100Lower end, which slows the pH climb
Calcium hardness (ppm)200 to 400175 to 400Pentair, CircuPool, AutoPilot: 200 to 400No; Hayward uses the saturation index instead
Cyanuric acid (ppm)30 to 50 (older Hayward manuals: 60 to 80)30 to 75Four of five manuals: 30 to 50Same as the chlorine chart on current manuals
Total dissolved solidsMeasure after salting; that is the new baselineNot givenNot givenYes: MAHC Annex says salt raises TDS, so the 1,500 ppm rule starts after salting

Sources: Hayward AquaRite 900 manual; Hayward Aqua Rite manual (2010); Pentair IntelliChlor guide; Jandy AquaPure manual; CircuPool CORE manual; AutoPilot Digital Nano manual; MAHC Annex 5.7.4.6. Download CSV

Printable salt water pool chemical levels chart: PC&S targets with the range across Hayward, Pentair, Jandy, CircuPool and AutoPilot manuals. Built by PC&S from the table above, November 2026.
Printable salt water pool chemical levels chart: PC&S targets with the range across Hayward, Pentair, Jandy, CircuPool and AutoPilot manuals. Built by PC&S from the table above, November 2026.
A salt chlorinator cell sits in the return line on the equipment pad; the MAHC asks public pools to test salt at least weekly (5.7.5.11), and the cell's own manual sets the range.
A salt chlorinator cell sits in the return line on the equipment pad; the MAHC asks public pools to test salt at least weekly (5.7.5.11), and the cell’s own manual sets the range.

Follow the manual for your cell, not a generic 3,200 ppm. At 3,000 ppm a Hayward AquaRite 900 is inside its range while a Pentair IntelliChlor is 600 ppm short of its 3,600 ppm ideal. The MAHC leaves salt to the manufacturer (5.7.3.1.5.2) and asks public pools to test it at least weekly (5.7.5.11). Salt doses by pool size are in our salt water pool maintenance guide.

What about TDS, phosphates, borates, copper and iron?

Only copper, silver and TDS appear in any code. The MAHC caps copper at 1.3 ppm and silver at 0.10 ppm for ion systems, Florida caps copper at 1 mg/L, and the MAHC Annex flags TDS 1,500 ppm above fill water. Phosphates, borates and iron have no code limit, so the targets come from labels and EPA staining guidance.

Iron has no pool limit, but EPA secondary drinking water standards link 0.3 mg/L iron to reddish staining and 1.0 mg/L copper to blue-green staining. Leslie’s says copper above 0.6 ppm may stain. Copper from ionizers, with label targets of 0.2 to 0.4 ppm, is covered in our pool ionizer guide.

TDS climbs with every dose of chemicals and every top-off. The MAHC Annex says a generally accepted TDS is 1,500 ppm above fill water, that high TDS can cut disinfectant effectiveness by up to 50%, and that readings above 5,000 ppm may need a drain and refill. Phosphates feed algae but are not regulated; HTH repeats its remover treatment above 125 ppb.

The tile line is where metal and scale problems show first: EPA links 1.0 mg/L copper to blue-green staining and 0.3 mg/L iron to reddish staining.
The tile line is where metal and scale problems show first: EPA links 1.0 mg/L copper to blue-green staining and 0.3 mg/L iron to reddish staining.
Pool chemical levels: key numbers and where each comes from
NumberWhat it isSource
7.0 to 7.8pH range in CDC home guidance, the MAHC and Florida's ruleCDC (May 10, 2024); MAHC 5.7.3.4.1; 64E-9.004(1)(d)1
1 ppm / 2 ppmMinimum free chlorine without / with cyanuric acidCDC; MAHC 5.7.3.1.1.2
10 ppmFree chlorine with swimmers that closes a public pool, and the Florida and California maximumMAHC 6.6.3.1; 64E-9.004; 22 CCR 65529
4 ppmRe-entry ceiling printed on common chlorine labelsEPA labels 10897-26 and 1258-1239
0.4 ppmCombined chlorine that triggers action (MAHC) and the Texas maximumMAHC 5.7.4.4.2; 25 TAC 265.193(c)
90 / 100 ppmCyanuric acid cap: MAHC / Florida, California, TexasMAHC 5.7.3.1.3.2; 64E-9.004; 65530; 265.193
2,500 ppmCalcium hardness cap in the MAHCMAHC 5.7.4.4.3
1,500 ppmTDS above fill or start-up waterMAHC Annex 5.7.4.6; PHTA via Taylor
1.3 / 1.0 ppmCopper cap: MAHC ion systems / FloridaMAHC 5.7.3.2.3.2; 64E-9.004(1)(d)6
104 FMaximum water temperatureMAHC 5.7.4.7.2; 22 CCR 65530

Sources: CDC; MAHC 2024; MAHC Annex; 64E-9.004; 65529; 65530; 265.193; EPA label 10897-26; EPA label 1258-1239. Download CSV

How do you read a test result against the chart?

Read each number against the chart, then run four quick checks: total minus free chlorine for combined chlorine, cyanuric acid divided by 45 for the chlorine floor, alkalinity minus 30% of cyanuric acid, and the saturation index. The worked example below takes one home test and one salt top-up through those steps.

Worked example: one home pool test read against the chart (20,000 gallons, plaster, 84 F)
StepReading or inputArithmeticResultVerdict against the chart
1. Combined chlorineFree 2.0 ppm, total 2.6 ppm2.6 minus 2.00.6 ppmAbove MAHC 0.4 and PHTA 0.2: shock
2. Chlorine for the stabilizerCyanuric acid 40 ppm40 / 450.89 ppm2.0 ppm clears the MAHC 45:1 line and meets CDC's 2 ppm
3. Corrected alkalinityTotal alkalinity 110 ppm, CYA 40 ppm110 minus 0.30 x 4098 ppmUse 98, not 110, in the LSI (MAHC Annex 30% rule)
4. Saturation indexpH 7.5, 84 F, hardness 300, alkalinity 98, TDS under 1,0007.5 + 0.7 + 2.1 + 2.0 minus 12.1+0.2Inside MAHC minus 0.3 to plus 0.3 and NPC 0.0 to plus 0.3
5. Salt top-up (20,000 gal, Pentair cell)Salt 3,000 ppm, target 3,600 ppm600 x 20,000 x 8.34 / 1,000,000100.08 lbThree 40 lb bags, then retest

Sources: MAHC Annex Table 5.7.4.6 factors and 30% CYA rule; MAHC 5.7.4.4.2 and 6.6.3.1; NPC; Pentair IntelliChlor guide; PC&S arithmetic. Download CSV

The example passes on pH 7.5, free chlorine 2.0 ppm and an LSI of +0.2 but fails on combined chlorine at 0.6 ppm, so the only action is a shock. How to read the kit itself, and which kits are accurate enough for these checks, is covered in how to test pool water. CDC asks home owners to test chlorine and pH at least twice a day. To turn a reading into an amount of product, our pool chemical calculator gives ounces of chlorine, acid, soda ash, baking soda, calcium chloride, stabilizer and salt for your gallons.

Where do popular pool chemical charts disagree with the codes?

Several widely shared charts print ideal ranges that sit outside the PHTA guideline, a chlorine label or a CDC minimum. The most common gaps are an ideal pH of 7.6 to 7.8, free chlorine above the 4 ppm label ceiling, 1 ppm chlorine in a stabilized pool and one salt range for every chlorinator.

What several pool chemistry charts say vs what the primary sources say (read November 2, 2026)
ClaimWhere it appearsWhat the primary source says
Ideal pH 7.6 to 7.8Inyo Pools levels page (plaster and fiberglass)PHTA ideal is 7.4 to 7.6; 7.8 is the maximum in PHTA, California 65530 and Texas 265.193
Ideal free chlorine 4 to 6 ppm at 30 ppm CYAInyo Pools levels pagePHTA ideal is 2.0 to 4.0 with a 5.0 maximum; Hasachlor and HTH Granular 73 labels bar swimming above 4 ppm
Total alkalinity 60 to 80 ppm ideal for vinylInyo Pools levels pagePHTA ideal is 80 to 120 ppm; 60 is the PHTA and Texas minimum
Free chlorine 1 to 3 ppmDreame cheat sheetCDC asks for at least 2 ppm when cyanuric acid is used, so 1 ppm is too low in a stabilized pool
Salt 2,700 to 3,400 ppmDreame cheat sheetTrue for Hayward; Pentair IntelliChlor wants 3,600 to 4,500 ppm
Chlorine 0.5 ppm in a mineral poolPool Research chemistry pageCDC sets 1 ppm for home pools; MAHC 5.7.3.2.3.3 keeps full chlorine levels with copper and silver ion systems
Calcium hardness 175 to 275 ppmPool Research chemistry pagePHTA and the MAHC Annex give 200 to 400 ppm for plaster

Charts: Inyo Pools; Dreame; Pool Research. Primary sources: PHTA via Taylor; CDC; MAHC; 65530; 265.193; EPA label 10897-26; Pentair. Download CSV

Some gaps have a reason. Inyo’s higher chlorine targets scale chlorine to stabilizer, a method the MAHC also uses for its 45 to 1 hazard line. The label ceiling still applies to the product in your pool, so check the bottle before swimming at those levels.

Rather have a pro keep the water in range?

Which numbers apply to your pool?

A private backyard pool answers to CDC guidance and the product labels, not to state pool codes. An HOA, apartment, hotel or club pool answers to its state rule: 64E-9.004 in Florida, 22 CCR 65529 and 65530 in California, 25 TAC 265.193 in Texas. The decision table turns the chart into actions.

Pool chemical levels decision table: if your situation is X, do Y
If your situation isDo thisRule behind it
A backyard pool at a single-family homeUse the home target column; never go below CDC minimums; the product label wins over bothCDC home guidance; no Florida, California or Texas chemistry rule covers private residential pools
An HOA, apartment, hotel or club poolFollow your state code; the MAHC applies only where adopted64E-9.004 (FL), 22 CCR 65529 and 65530 (CA), 25 TAC 265.193 (TX)
Free chlorine above 10 ppmKeep swimmers out until it dropsMAHC 6.6.3.1 hazard; Florida and California maximum
Free chlorine 4 to 10 ppmRead your chlorine label before swimmingHasachlor and HTH Granular 73 labels: no entry above 4 ppm
pH below 6.5 or above 8.0Correct it before anyone swimsMAHC 6.6.3.1 closes public pools at those readings
Combined chlorine above 0.4 ppmShock the poolMAHC 5.7.4.4.2
Cyanuric acid above 90 to 100 ppmPartial drain; in Texas public pools hold free chlorine at 2.0 ppm until CYA is under 100MAHC 5.7.3.1.3.2; 65530; 265.193(p)
Salt pool with salt outside the cell's rangeAdd salt or dilute to the range printed on your chlorinatorMAHC 5.7.3.1.5.2
Copper above 0.6 ppmStop copper products, check for stains, test fill waterLeslie's staining line; Florida cap 1 ppm
TDS 1,500 ppm above start-upPartial drain and refillMAHC Annex 5.7.4.6

Sources: CDC; MAHC 2024; 64E-9.004; 65529; 65530; 265.193; EPA label 10897-26; EPA label 1258-1239; Leslie‘s; MAHC Annex. Download CSV

How we compiled this

We read the CDC home pool page, the 2024 MAHC Code and Annex, the PHTA parameter table as reproduced by Taylor Technologies, Florida rule 64E-9.004 (effective June 11, 2023), California 22 CCR 65529 and 65530 and Texas 25 TAC 265.193 in October and November 2026, plus two EPA chlorine labels, five chlorinator manuals, EPA secondary standards and the NPC start-up card. The ANSI/APSP/ICC-11 standard is paywalled, so no number is taken from it directly. Retailer and forum charts appear only in the comparison table, never as sources for a target.

Frequently Asked Questions

What should my pool chemical levels be?

For a home chlorine pool: free chlorine 2 to 4 ppm, combined chlorine 0.2 ppm or less, pH 7.4 to 7.6, total alkalinity 80 to 120 ppm, calcium hardness 200 to 400 ppm on plaster and cyanuric acid 30 to 50 ppm. Those are the PHTA ideal ranges, and each sits inside the CDC, MAHC, Florida, California and Texas limits.

What is the ideal pH level for a pool?

7.4 to 7.6 is the PHTA ideal. CDC and the 2024 MAHC accept 7.0 to 7.8, California 65530 accepts 7.2 to 7.8, and Texas sets 7.2 to 7.6 as ideal with 7.8 as the maximum. Below 6.5 or above 8.0, the MAHC treats a public pool as an imminent health hazard.

What should the chlorine level be in a pool?

At least 1 ppm free chlorine, or 2 ppm if the water contains cyanuric acid, per CDC. The PHTA ideal is 2 to 4 ppm. Florida and California public pools may run up to 10 ppm and Texas to 8 ppm, but Hasachlor and HTH Granular 73 labels bar swimming above 4 ppm.

What are the ideal chemical levels for a salt water pool?

Salt at the range printed on your chlorinator, 2,700 to 3,400 ppm for Hayward AquaRite 900 and 3,600 to 4,500 ppm for Pentair IntelliChlor; free chlorine 2 to 3 ppm; pH 7.4 to 7.6; alkalinity 80 to 100 ppm; calcium 200 to 400 ppm; and stabilizer 30 to 50 ppm on current manuals.

Which pool chemical should I balance first?

Total alkalinity first, then pH. The Florida DOH operators’ manual (2016) tells operators to adjust alkalinity before pH because alkalinity buffers pH. Next come calcium hardness and stabilizer, which change slowly, and chlorine last, since its strength depends on pH and cyanuric acid. Retest after each change.

How often should I test my pool water?

CDC asks home owners to test free chlorine and pH at least twice a day. For public pools the MAHC sets total alkalinity weekly, calcium hardness and cyanuric acid monthly, the saturation index monthly, TDS quarterly and salt at least weekly, and Florida requires pH and disinfectant tests every 24 hours.

Sources

  1. CDC. Home Pool and Hot Tub Water Treatment and Testing (updated May 10, 2024). Accessed 2026-11-02.
  2. CDC. 2024 Model Aquatic Health Code, 5th Edition, Code Language. Accessed 2026-11-01.
  3. CDC. 2024 Model Aquatic Health Code, 5th Edition, Annex. Accessed 2026-11-01.
  4. Taylor Technologies / Pool & Hot Tub Alliance. Water Testing Technical FAQs: PHTA recommended water chemistry parameters (reviewed Aug 12, 2026). Accessed 2026-11-02.
  5. Florida Department of Health / Florida Administrative Code. Rule 64E-9.004, F.A.C., Operational Requirements (effective June 11, 2023). Accessed 2026-11-02.
  6. California Code of Regulations via Cornell LII. Cal. Code Regs. tit. 22, 65529 Public Pool Disinfection. Accessed 2026-11-02.
  7. California Code of Regulations via Cornell LII. Cal. Code Regs. tit. 22, 65530 Public Pool Water Characteristics. Accessed 2026-11-02.
  8. Texas Department of State Health Services. 25 TAC Chapter 265, Subchapter L, 265.193 Water Quality at Pools and Spas. Accessed 2026-11-02.
  9. U.S. EPA Pesticide Product and Label System. Hasachlor, EPA Reg. No. 10897-26 (label accepted April 24, 2026). Accessed 2026-10-19.
  10. U.S. EPA Pesticide Product and Label System. HTH Granular 73, EPA Reg. No. 1258-1239 (label file February 24, 2025). Accessed 2026-10-19.
  11. U.S. EPA Pesticide Product and Label System. ProTeam Supreme, EPA Reg. No. 57787-27 (master label). Accessed 2026-11-02.
  12. U.S. EPA. Secondary Drinking Water Standards: Guidance for Nuisance Chemicals. Accessed 2026-11-02.
  13. National Plasterers Council. Pool Start-Up Procedures card (rev. 03-2021). Accessed 2026-11-02.
  14. Hayward. AquaRite 900 Series Owner's Manual, Rev D. Accessed 2026-11-02.
  15. Hayward. Aqua Rite Electronic Chlorine Generator manual. Accessed 2026-10-26.
  16. Pentair. IntelliChlor IC15 to IC60 Installation and User's Guide. Accessed 2026-11-02.
  17. Jandy. AquaPure and PureLink manual H0325600 Rev F. Accessed 2026-11-02.
  18. CircuPool. CORE Series manual. Accessed 2026-10-26.
  19. AutoPilot. Pool Pilot Digital Nano manual, Rev 5. Accessed 2026-11-02.
  20. HTH. HTH Pool Care Phosphate Remover. Accessed 2026-11-02.
  21. Leslie's. How to Treat Black Algae in Your Pool. Accessed 2026-11-01.
  22. Florida Department of Health in Collier County. Swimming Pool Operators' Manual, 2016 Version. Accessed 2026-10-08.
  23. CDC. Pool Chemical Safety. Accessed 2026-10-19.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.