
Borax in Pool Water: How Much to Add, What It Does and When to Skip It
Borax in pool water raises pH while adding little alkalinity: 1 lb lifts a 10,000 gallon pool about 0.16 pH at 80 ppm alkalinity, under half of soda ash's push (PC&S model).
- ✓About 19.5 oz per 10,000 gallons for +0.2 pHAt pH 7.2 and 80 ppm alkalinity, per our worked chemistry model. Soda ash needs about 10.0 oz for the same lift.
- ✓Borates at 30 to 50 ppm need 22 to 37 lbThat is the range printed on the EPA-registered ProTeam Supreme label (EPA Reg. No. 57787-27).
- ✓Laundry borax has no pool labelU.S. Borax says its borates go into US pools only inside an EPA FIFRA registered product (brochure, May 2025).
Key takeaways
- One pound of borax raises a 10,000 gallon pool about 0.16 pH at 80 ppm alkalinity and adds 3.1 ppm of alkalinity; soda ash gives +0.36 and 11.3 ppm (PC&S model, carbonic acid constant from the USGS).
- For the same +0.2 pH lift, borax cost $2.60 to $2.69 and soda ash $2.06 at November 2026 prices (Valley Wide Cooperative, Leslie’s).
- EPA-registered borate products hold 30 to 50 ppm (ProTeam Supreme label, EPA Reg. No. 57787-27); reaching 50 ppm with laundry borax takes 36.8 lb per 10,000 gallons plus about 296 fl oz of muriatic acid.
- Boric acid has a pKa of 9.24 (PubChem), so borates buffer hardest against rising pH: at pH 7.8, 50 ppm borates resist change about 2.9 times as strongly as 80 ppm of carbonate alkalinity (model).
- A child who swallows the EPA upper-percentile 90 mL of 50 ppm water takes in 4.5 mg of boron, against a 4.0 mg daily reference for a 20 kg child (EPA IRIS; EPA Exposure Factors Handbook).
What does borax do in a pool?
Borax is sodium tetraborate decahydrate, a white mineral salt sold as a laundry booster. In pool water it splits into borate ions and boric acid. The borate ions grab hydrogen ions, so pH rises, and the boric acid that builds up acts as a buffer against pH climbing further. At 30 to 50 ppm that buffer is what borate pool products sell; a single box mostly just raises pH.
The formula is Na2B4O7 x 10H2O with a molar mass of 381.4 g/mol (PubChem, CID 16211214). By weight it is 11.3% boron, and U.S. Borax, the miner behind the 20 Mule Team brand, puts it at 36% boron oxide against 67% for its Polybor pool-grade borate (U.S. Borax swimming pool brochure, May 2025). That gap is why a borate program built on laundry borax takes so many boxes.
Boric acid is a weak acid with a pKa of 9.24 at 25 C (PubChem, CID 7628). At pool pH almost all dissolved boron sits as boric acid: about 98% at pH 7.5 by our arithmetic. Each borax formula unit releases two borate ions, and in water near pH 7.5 those ions take hydrogen from dissolved carbon dioxide. Carbon dioxide drops, bicarbonate rises and pH climbs.
| Number | Value | Source |
|---|---|---|
| Borax formula and molar mass | Na2B4O7 x 10H2O, 381.4 g/mol | PubChem CID 16211214 |
| Boron share of borax by weight | 11.3% | PC&S arithmetic: 4 x 10.81 / 381.37 |
| Boron oxide share, borax vs Polybor | 36% vs 67% B2O3 | U.S. Borax brochure (May 2025) |
| Boric acid pKa at 25 C | 9.24 | PubChem CID 7628 |
| pH rise, 1 lb borax in 10,000 gal (TA 80, pH 7.2) | +0.16 | PC&S model (USGS K1, PubChem masses) |
| pH rise, 1 lb soda ash, same water | +0.36 (Florida DOH rule: +0.3) | PC&S model; Florida DOH (2016) |
| Alkalinity added per lb in 10,000 gal: borax / soda ash | 3.1 / 11.3 ppm | PC&S model |
| Borate level on EPA-registered borate labels | 30 to 50 ppm | ProTeam Supreme label, EPA Reg. No. 57787-27 |
| Borax for 50 ppm borates in 10,000 gal | 36.8 lb | PC&S arithmetic |
| U.S. EPA oral reference dose for boron | 0.2 mg/kg-day | EPA IRIS (2004) |
Sources: PubChem; U.S. Borax (May 2025); EPA-stamped ProTeam Supreme label; Florida DOH (2016); EPA IRIS; PC&S model. Download CSV
How much does borax raise pool pH? The math, step by step
One pound of borax in 10,000 gallons raises pH about 0.16 when the water starts at pH 7.2 with 80 ppm alkalinity. We worked that out from published constants rather than copying a rule of thumb: the USGS carbonic acid constant, PubChem molar masses and two borate ions per formula unit. The same model gives soda ash +0.36, close to Florida DOH’s +0.3 rule.
| Step | Input or result | Value | Source |
|---|---|---|---|
| 1 | Pool volume | 10,000 gal = 37,854 L | U.S. gallon definition |
| 2 | Starting water | pH 7.2, total alkalinity 80 ppm (1.60 meq/L) | Example inputs |
| 3 | Dissolved CO2 at start | 1.60 / 10^(7.2 minus 6.35) = 0.226 mmol/L | USGS NFM 6.6: K1 = 10^-6.35 at 25 C |
| 4 | Moles of borax in 1 lb | 453.6 g / 381.37 g/mol = 1.189 mol | PubChem CID 16211214 |
| 5 | Borate ions released per liter | 2 x 1.189 / 37,854 = 0.0628 mmol/L | Borax gives 2 borate ions per formula unit |
| 6 | Borate takes CO2: bicarbonate and CO2 after | 1.663 meq/L and 0.163 mmol/L | Boric acid pKa 9.24 (PubChem) is far above 6.35 |
| 7 | New pH | 6.35 + log10(1.663 / 0.163) = 7.36 | Henderson-Hasselbalch |
| 8 | Alkalinity added | 0.0628 x 50.04 = 3.1 ppm as CaCO3 | PC&S arithmetic |
| 9 | Same math for 1 lb soda ash | pH 7.56 (+0.36), +11.3 ppm alkalinity | Florida DOH rule of thumb: +0.3 per lb |
Sources: USGS National Field Manual 6.6 (K1 = 10^-6.35 at 25 C); PubChem; Florida DOH operators manual (2016). PC&S model, November 2026. Download CSV
Alkalinity sets how far a pound goes. At 60 ppm one pound of borax lifts pH 0.22; at 120 ppm it lifts only 0.10, because more bicarbonate means more buffering. The chart shows the same pattern for soda ash, which moves pH roughly twice as far per pound at every alkalinity level.
Instant effect before carbon dioxide leaves the water. Cyanuric acid is not counted, so stabilized pools move a little more.
Source: PC&S closed carbonate model: USGS NFM 6.6 (K1 = 10^-6.35), PubChem molar masses; read November 2026. Download chart data (CSV)
| Total alkalinity (ppm) | Borax for +0.1 pH (oz) | Borax for +0.2 pH (oz) | Borax for +0.3 pH (oz) | Soda ash for +0.2 pH (oz) |
|---|---|---|---|---|
| 60 | 8.0 | 14.6 | 20.1 | 7.5 |
| 80 | 10.6 | 19.5 | 26.8 | 10.0 |
| 100 | 13.3 | 24.4 | 33.5 | 12.5 |
| 120 | 15.9 | 29.2 | 40.2 | 15.0 |
Source: PC&S model from USGS and PubChem constants, November 2026. Scale linearly for other pool sizes. Download CSV
| Pool volume (gal) | Borax for +0.2 pH (oz) | Borax for +0.2 pH (lb) | First dose at half (oz) |
|---|---|---|---|
| 5,000 | 9.7 | 0.61 | 4.9 |
| 10,000 | 19.5 | 1.22 | 9.7 |
| 15,000 | 29.2 | 1.83 | 14.6 |
| 20,000 | 39.0 | 2.44 | 19.5 |
| 25,000 | 48.7 | 3.04 | 24.4 |
| 30,000 | 58.4 | 3.65 | 29.2 |
Source: PC&S model. Get gallons right first with our pool volume calculator. Download CSV
Does borax raise alkalinity?
A little. One pound of borax adds about 3.1 ppm of total alkalinity to 10,000 gallons, against 11.3 ppm for soda ash and 7.1 ppm for baking soda. For the same 0.2 pH lift at 80 ppm alkalinity, borax adds 3.8 ppm and soda ash adds 7.1 ppm. That makes borax the pH raiser to reach for when alkalinity is already at or above range.
Borax behaves much like a dose of lye in the carbonate system: each of the 2 borate ions per formula unit converts one carbon dioxide molecule into bicarbonate. Soda ash converts only one carbon dioxide for every two units of alkalinity it adds. That is the whole reason borax moves pH further for each ppm of alkalinity. If alkalinity is the number that is low, our guide on how to raise alkalinity in a pool covers baking soda doses.
| Option | pH rise per lb, 10,000 gal (TA 80, pH 7.2) | Alkalinity added per lb | Best use | Source |
|---|---|---|---|---|
| Borax (sodium tetraborate decahydrate) | +0.16 (model) | 3.1 ppm | pH low, alkalinity already in range or high | PC&S model; PubChem; USGS |
| Soda ash (sodium carbonate) | +0.36 (model); +0.3 (Florida DOH) | 11.3 ppm | pH low and alkalinity low or mid | PC&S model; Florida DOH (2016) |
| Baking soda (sodium bicarbonate) | Small; alkalinity tool | 7.1 ppm | Alkalinity under 80 ppm | PC&S raise alkalinity guide (Skinner and Hales, 1995; PubChem) |
| Aeration | No chemical; slow | 0 ppm | Small pH lift with alkalinity in range | Virginia DOH; Orenda |
| Boric acid | Slight | Near 0 ppm | Building borates without a pH spike | PubChem pKa 9.24 |
Sources: PC&S model; Florida DOH; PubChem; Skinner and Hales (1995). Download CSV
Borates also show up in your test kit. At 50 ppm borates and pH 7.5, borate ions add about 4.1 ppm to a total alkalinity titration by our arithmetic, rising to 8.1 ppm at pH 7.8. The error is small at pool pH, but log it if you run borates. Soda ash doses for pH alone are in our guide on how to raise pH in pool water.
Is borax cheaper than soda ash per dose?
Per pound, yes; per pH lift, no. A 65 oz box of 20 Mule Team borax listed at $8.69 to $8.99 on November 1, 2026, about $0.134 to $0.138 an ounce, while Leslie’s listed 10 lb of soda ash at $32.99 in September 2026, $0.206 an ounce. Borax needs about twice the weight for the same lift, so a +0.2 dose costs $2.60 to $2.69 against $2.06.
| Item | Borax (Valley Wide Cooperative) | Borax (Hemlock Hardware) | Soda ash (Leslie's) |
|---|---|---|---|
| Listed price | $8.69 for 65 oz | $8.99 for 65 oz | $32.99 for 10 lb |
| Price date | Read Nov 1, 2026 | Read Nov 1, 2026 | Wayback capture Sept 16, 2026 |
| Price per oz | $0.134 | $0.138 | $0.206 |
| Dose for +0.2 pH, 10,000 gal, TA 80, pH 7.2 (model) | 19.5 oz | 19.5 oz | 10.0 oz |
| Cost of that dose | $2.60 | $2.69 | $2.06 |
| Alkalinity added by that dose | 3.8 ppm | 3.8 ppm | 7.1 ppm |
Sources: Valley Wide Cooperative and Hemlock Hardware product pages, read November 1, 2026; Leslie’s Soda Ash pH Up 10 lb, Wayback capture September 16, 2026, via our pool equipment price research. Doses from the PC&S model. Download CSV
Shelf prices move, so the ratio matters more than the cents. Borax wins on cost only where a box sells for under about $6.89, the price at which 19.5 oz matches the $2.06 soda ash dose. The case for borax is chemistry, not price: less alkalinity per pH unit. Producer price trends for pool chemicals are tracked in our pool chemical price research.
What are pool borates at 30 to 50 ppm, and how do you build them?
Borates are a standing level of dissolved boron, measured in ppm as boron, that stays in the water until it is splashed out or backwashed away. The EPA-stamped ProTeam Supreme label says to hold 30 to 50 ppm and test monthly. Building 50 ppm in 10,000 gallons takes 36.8 lb of laundry borax, 28.1 lb of sodium tetraborate pentahydrate or 23.9 lb of boric acid.
Two registered labels show how the pros dose it. ProTeam Supreme (EPA Reg. No. 57787-27) calls for 2 lb per 1,000 gallons in two half doses, with 3/4 lb of sodium bisulfate or 10 oz of muriatic acid for each pound to hold pH at 7.4 to 7.6. BioGuard Algae Optimizer Plus (EPA Reg. No. 5185-461) uses the same 2 lb per 1,000 gallons, says it gives about 35 ppm, and splits it into three doses at least 8 hours apart.

Our arithmetic checks the BioGuard figure: 20 lb of pentahydrate at 14.8% boron in 10,000 gallons gives 35.6 ppm boron. It also checks the acid: neutralizing the borate in 1 lb of pentahydrate takes 10.5 fl oz of 31.45% muriatic acid by our model, against 10 oz on the label. For laundry borax the same math gives 8.0 fl oz per pound.
| Product | Boron by weight | Lb for 30 ppm borates, 10,000 gal | Lb for 50 ppm borates, 10,000 gal | Muriatic acid (31.45%) to offset, fl oz per lb | Source |
|---|---|---|---|---|---|
| Borax (decahydrate, laundry box) | 11.3% | 22.1 | 36.8 | 8.0 (model) | PubChem CID 16211214 |
| Sodium tetraborate pentahydrate (ProTeam Supreme, BioGuard Optimizer Plus) | 14.8% | 16.9 | 28.1 | 10.5 (model); label: 10 | PubChem CID 86341921; EPA Reg. No. 57787-27 |
| Boric acid | 17.5% | 14.3 | 23.9 | 0 (near neutral) | PubChem CID 7628 |
Sources: PubChem masses (borax, boric acid); ProTeam Supreme label; acid strength from Skinner and Hales (1995). PC&S arithmetic. Download CSV
| Step | Value | How it is worked out |
|---|---|---|
| Pool | 10,000 gal, 0 ppm borates | Example |
| Boron needed | 50 mg/L x 37,854 L = 1,893 g | PC&S arithmetic |
| Borax needed | 36.8 lb | 1,893 g / 0.1134 / 453.6 g per lb |
| 65 oz boxes | 9.1 | 36.8 lb / 4.06 lb per box |
| Borax cost at $8.69 a box | $78.72 | Valley Wide Cooperative, Nov 1, 2026 |
| Muriatic acid to hold pH | 296 fl oz (2.3 gal) | 8.0 fl oz per lb (model) |
| Acid cost at $9.75 a gallon | $22.52 | Leslie's 2 x 1 gal for $19.49, Sept 2026 |
| Total | $101.25 | Before tax; split into 3 doses 8 hours apart |
Sources: Valley Wide Cooperative (Nov 1, 2026); Leslie’s muriatic acid 2-pack, Wayback capture Sept 16, 2026; PC&S arithmetic. Download CSV
Competitor guides land in the same place: Aiper prints 7.375 lb of borax per 10 ppm and The Pool Nerd 3.68 lb per 1,000 gallons for 50 ppm, both matching our 36.8 lb. What they skip is the acid bill and the label question below. To read the level, LaMotte’s Insta-TEST borate strips (order code 3017-G) show 0, 15, 30, 50 and 80 ppm in 15 seconds (LaMotte). Our guide to testing pool water covers the rest of the kit.
Why do borates stop pH from rising?
Because boric acid’s pKa is 9.24, its buffering grows as pH climbs toward 8, exactly where carbonate alkalinity weakens. Our model puts 50 ppm borates at 360 micromoles per liter per pH unit at pH 7.8, against 126 for 80 ppm of carbonate alkalinity, about 2.9 times as much. Below pH 7.6 carbonate does more of the work.
Closed-system model; carbon dioxide loss to air keeps pushing carbonate-only pools upward.
Source: PC&S model: boric acid pKa 9.24 (PubChem), carbonic acid K1 = 10^-6.35 (USGS NFM 6.6), closed system. Download chart data (CSV)
This is the honest case for borates in a pool whose pH keeps rising past 7.8, such as a salt pool or one with a spillover. Acid is still needed: borates slow the climb, they do not remove the base that causes it. Our salt water pool maintenance guide explains why salt cells push pH up. U.S. Borax goes further and says borates can fully replace alkalinity; that is a manufacturer claim, and no health department manual we read endorses it.
Is borax approved for pool use?
Not as a laundry box. U.S. Borax says its borates may be used in US and Canadian pools only inside an EPA FIFRA or Canada PMRA registered product, that regular industrial grade borax cannot be used in pools, and that borates are not approved for pools and spas in the EU (brochure, May 2025). Algae claims are what need EPA registration.
| Product | Chemistry | pH effect when added | Registered pool use | Source |
|---|---|---|---|---|
| Laundry borax (20 Mule Team box) | Sodium tetraborate decahydrate, 11.3% boron | Raises pH | None on the box; sold as laundry booster and cleaner | Valley Wide Cooperative product description |
| ProTeam Supreme | Sodium tetraborate pentahydrate 99.5% | Raises pH; label adds acid | EPA Reg. No. 57787-27, 30 to 50 ppm | EPA-stamped label (2011) |
| BioGuard Algae Optimizer Plus | Sodium tetraborate pentahydrate | Raises pH; about 1 lb pH decreaser per 2 lb | EPA Reg. No. 5185-461, about 35 ppm | EPA-stamped label (2008) |
| Polybor (U.S. Borax) | Disodium octaborate tetrahydrate, 67% B2O3 | About pH 8.5 as sold | Pool use only inside an EPA FIFRA or PMRA registered product | U.S. Borax brochure (May 2025) |
| Boric acid | H3BO3, 17.5% boron, pKa 9.24 | Slight | Check the label | PubChem CID 7628 |
Sources: ProTeam Supreme label; BioGuard Algae Optimizer Plus label; U.S. Borax brochure (May 2025); PubChem; Valley Wide Cooperative product description. Download CSV
Several top-ranking guides call laundry borax an algaecide. The primary sources say otherwise: the products that carry algae claims are registered pesticides with EPA numbers, and the 2011 ProTeam notice says it was reregistered after the EPA’s boric acid review. Using borax only to raise pH makes no such claim. Products that do control algae are compared in our pool algaecide guide.
Regulators are still looking at pool exposure. Canada’s March 2025 revised risk management scope names swimming pool and spa maintenance products as an exposure source and proposes studying safe concentration limits for boric acid in pools (Environment and Climate Change Canada and Health Canada). In the US, the 2024 Model Aquatic Health Code, the CDC’s model code for public pools, does not mention borates at all, by our text search of the code and Annex.
Is borax in pool water safe for swimmers and pets?
For skin contact, NPIC rates boric acid low in toxicity and poorly absorbed through intact skin. Swallowed water is the question. The EPA’s boron reference dose is 0.2 mg per kg of body weight per day. At 50 ppm, a child who swallows the EPA upper-percentile 90 mL takes in 4.5 mg, a little above the 4.0 mg reference for a 20 kg child.
| Benchmark or scenario | Value | Source |
|---|---|---|
| EPA oral reference dose (lifetime daily intake) | 0.2 mg boron per kg body weight per day | EPA IRIS, updated Aug 5, 2004 |
| Health Canada drinking water MAC | 5 mg/L (health-based value 0.1 mg/L) | Health Canada, March 2023 |
| U.S. EPA drinking water | No MCL; lifetime health advisory 5 mg/L | Health Canada international table |
| WHO drinking water guideline | 2.4 mg/L | Health Canada international table |
| Pool at 50 ppm borates | 50 mg/L boron | ProTeam label upper limit |
| Child swallows 37 mL (EPA mean per swim) at 50 ppm | 1.85 mg boron | EPA Exposure Factors Handbook Table 3-2 x 50 mg/L |
| Child swallows 90 mL (EPA upper percentile) at 50 ppm | 4.5 mg boron | Same |
| Daily reference amount, 20 kg child | 4.0 mg boron | 0.2 x 20 kg |
| Adult swallows 16 mL (EPA mean) at 50 ppm | 0.8 mg vs 14 mg reference for 70 kg | Same |
| Child, 90 mL at 30 ppm | 2.7 mg boron | Same |
Sources: EPA IRIS, boron (updated August 5, 2004); EPA Exposure Factors Handbook, Table 3-2; Health Canada (2023); Health Canada international table. PC&S arithmetic. Download CSV
Read the model with its limits. The reference dose is a lifetime daily benchmark with safety margins built in, and the EPA rates its swim-ingestion data as low confidence, from 53 swimmers in a 45-minute study. A pool at 50 ppm boron still holds 10 times Health Canada’s 5 mg/L drinking water limit and about 21 times the WHO’s 2.4 mg/L guideline, so it is not water to drink.
Pets get no separate number. NPIC says boric acid affects animals the way it affects people, with signs that can start within 2 hours of eating it, and that infants are more sensitive. We found no veterinary agency guidance for borate pool water, so a dog that drinks from the pool every day is the case to avoid: give it a water bowl or keep borates at the low end.
How to add borax to a pool, step by step
Test first, dose half of the model amount, broadcast it with the pump running and retest after a full turnover. The registered borate labels follow the same pattern: split doses, pump on, brush undissolved product and adjust pH afterward. Aim for pH 7.2 to 7.6, inside the CDC’s 7.0 to 7.8 range for home pools.
- Test pH, alkalinity, stabilizer and boratesUse pH under 7.2 as the cue. If alkalinity is under 80 ppm, fix that first with baking soda.
- Confirm the gallonsDose tables assume a known volume, and any volume error carries straight into the dose.
- Pick the doseUse the alkalinity table above, then weigh out half. For 10,000 gallons at 80 ppm and pH 7.2, that is about 9.7 oz for a 0.2 rise.
- Broadcast with the pump runningBioGuard and ProTeam both broadcast over the surface with the pump on. Brush any granules that settle.
- Wait for a full turnover, then retestProTeam adjusts pH after a normal turnover; BioGuard waits at least 8 hours between borate doses.
- Add the rest or stopStop at pH 7.4 to 7.6. If you overshoot, lower it with measured muriatic acid.
- Log itRecord dose and result. After two or three doses, your own pool’s response beats any model.
Overshooting above pH 7.8 is the common mistake; our guide on how to lower pH in a pool has acid doses by volume. Scale on the waterline after a pH spike is a separate cleanup, covered in our guide on how to clean pool tile.

Would you rather have a pro balance the water?
A weekly service visit is the simplest fix when pH keeps drifting above 7.8, the top of the CDC’s 7.0 to 7.8 range for home pools, because the technician tests and doses on site every week. Tell us your ZIP code and pool size and we will connect you with licensed pool service companies near you.
Should you use borax in your pool? Decision table
Use borax when pH is under 7.2 and alkalinity is already 80 ppm or higher, or when you want a borate buffer and accept the acid it takes. Skip it when alkalinity is low, when cost per dose is the priority, when small children or pets swallow a lot of pool water, or when the pool is in the EU. The table and flowchart hold the same rules.
| If your situation is | Do this | Why (source) |
|---|---|---|
| pH under 7.2 and alkalinity under 80 ppm | Use baking soda first, then soda ash; skip borax | Borax adds only 3.1 ppm alkalinity per lb (PC&S model) |
| pH under 7.2, alkalinity 80 to 120 ppm or higher | Borax: start at half the table dose, retest after a full turnover | About half the alkalinity of soda ash for the same pH lift (model) |
| Cost per pH lift matters most | Soda ash | $2.06 vs $2.60 to $2.69 for +0.2 pH in 10,000 gal (Nov 2026 prices) |
| Salt pool or spillover pool with pH that keeps rising | Consider 30 to 50 ppm borates and keep acid on hand | Borate buffering is strongest above pH 7.6 (PubChem pKa 9.24; model) |
| You want an algae claim on the product | Buy an EPA-registered borate product and follow its label | ProTeam Supreme 57787-27; BioGuard 5185-461 |
| Toddlers swallow a lot of water or a dog drinks from the pool daily | Stay at or under 30 ppm, or skip borates | 50 ppm x 90 mL = 4.5 mg boron vs 4.0 mg reference for a 20 kg child (EPA, model) |
| Pool is in the EU | Do not add borates | Not approved for pools and spas in the EU (U.S. Borax, May 2025) |
| Hot tub | Use a product labeled for spas | The registered labels reviewed here are written for pools |
Sources: PC&S model; ProTeam Supreme label; BioGuard label; U.S. Borax (May 2025); EPA IRIS; EPA EFH. Download CSV

How we compiled this
We read two EPA-stamped borate product labels, a U.S. Borax brochure, Canada’s March 2025 boric acid risk management scope, EPA IRIS and Exposure Factors Handbook pages, Health Canada’s boron guideline, an NPIC fact sheet, PubChem records and the USGS alkalinity manual in November 2026: 14 primary documents in all. Dose and buffer numbers are a PC&S model built from those constants, not field tests. Forum posts were used for question wording only, never for facts.
Frequently Asked Questions
Is it safe to put borax in a pool?
In measured doses for pH, the documented skin risk is low: NPIC rates boric acid low in toxicity on skin. The open questions are swallowed water and labels. At 50 ppm a child swallowing 90 mL takes in 4.5 mg of boron against a 4.0 mg daily EPA reference for 20 kg, and laundry borax carries no pool directions.
How much borax do I put in my pool?
For pH, about 19.5 oz per 10,000 gallons raises pH 0.2 from 7.2 at 80 ppm alkalinity, by our model; add half, then retest. For a 30 to 50 ppm borate level, plan 22.1 to 36.8 lb per 10,000 gallons, split into doses, with acid to hold pH.
Does borax raise alkalinity in a pool?
Slightly. One pound adds about 3.1 ppm of total alkalinity to 10,000 gallons, against 11.3 ppm for soda ash and 7.1 ppm for baking soda. That small alkalinity bump is why borax suits pools with low pH but normal or high alkalinity.
Is borax better than soda ash for raising pH?
Better for alkalinity, worse for cost. For a 0.2 pH lift in 10,000 gallons, borax adds 3.8 ppm alkalinity and soda ash 7.1 ppm (model), but the borax dose cost $2.60 to $2.69 against $2.06 for soda ash at November 2026 prices.
Is borax the same as borates?
Borax is one borate. It is sodium tetraborate decahydrate, 11.3% boron. The two EPA-registered borate products we read use the pentahydrate (14.8% boron), boric acid is 17.5% boron, and the 30 to 50 ppm target on the ProTeam Supreme label is measured as boron.
Does borax kill algae in a pool?
A laundry box makes no such claim. Borate products sold to suppress algae, such as ProTeam Supreme (EPA Reg. No. 57787-27) and BioGuard Algae Optimizer Plus (5185-461), are registered pesticides, and BioGuard’s label says it does not replace a weekly algaecide.
Can you swim after adding borax to a pool?
Wait until it has dissolved and circulated. BioGuard’s label spaces borate doses at least 8 hours apart and ProTeam adjusts pH after a full turnover, so retest pH before swimming and confirm it sits between 7.2 and 7.8. Brush any granules off the floor first, since undissolved borate settles where swimmers stand.
Can I use borax in a salt water pool?
Yes, the BioGuard label lists use in pools with saline chlorine generators. Borates buffer hardest above pH 7.6, where salt pools tend to drift: at pH 7.8 our model puts 50 ppm borates at 2.9 times the buffering of 80 ppm carbonate alkalinity.
Sources
- National Library of Medicine, PubChem. Borax (B4Na2O7.10H2O), compound record CID 16211214. Accessed 2026-11-01.
- National Library of Medicine, PubChem. Boric Acid, compound record CID 7628 (Dissociation Constants). Accessed 2026-11-01.
- U.S. Geological Survey. National Field Manual, Chapter A6, Section 6.6: Alkalinity and Acid Neutralizing Capacity (version 4.0, 2012). Accessed 2026-11-01.
- U.S. Borax (Rio Tinto). Borates in swimming pools (brochure, 5/2025). Accessed 2026-11-01.
- U.S. EPA Pesticide Product Label System. ProTeam Supreme, EPA Reg. No. 57787-27, notice of reregistration and stamped label (March 30, 2011). Accessed 2026-11-01.
- U.S. EPA Pesticide Product Label System. BioGuard Algae Optimizer Plus, EPA Reg. No. 5185-461, accepted label amendment (September 17, 2008). Accessed 2026-11-01.
- Environment and Climate Change Canada; Health Canada. Revised Risk Management Scope for Boric Acid, its Salts and its Precursors (March 2025). Accessed 2026-11-01.
- Health Canada. Guidelines for Canadian Drinking Water Quality: Boron (March 2023). Accessed 2026-11-01.
- Health Canada. Boron guideline technical document: International considerations. Accessed 2026-11-01.
- U.S. EPA Integrated Risk Information System. Boron and Compounds, IRIS assessment (updated August 5, 2004). Accessed 2026-11-01.
- U.S. EPA. Exposure Factors Handbook Highlights, Chapter 3: Ingestion of Water and Other Select Liquids. Accessed 2026-11-01.
- National Pesticide Information Center. Boric Acid General Fact Sheet (reviewed December 2013). Accessed 2026-11-01.
- CDC. 2024 Model Aquatic Health Code, 5th Edition, Code Language. Accessed 2026-11-01.
- CDC. Home Pool and Hot Tub Water Treatment and Testing (updated May 2024). Accessed 2026-10-08.
- Florida Department of Health in Collier County. Swimming Pool Operators' Manual, 2016 Version. Accessed 2026-10-08.
- Kim Skinner and J. Que Hales (copy hosted by CPO Training). Dosages for Adjusting Alkalinity, Journal of the Swimming Pool and Spa Industry 1(1) (1995). Accessed 2026-10-19.
- LaMotte Company. Insta-TEST Borate Test Strips, order code 3017-G. Accessed 2026-11-01.
- Valley Wide Cooperative. Borax Natural Laundry Booster and Cleaner, 65 oz (price). Accessed 2026-11-01.
- Hemlock Hardware. 20 Mule-Team 65 Oz. Borax Laundry Booster (price). Accessed 2026-11-01.
- Leslie's, via Internet Archive. Leslie's Soda Ash pH Up, 10 lb (Wayback capture September 16, 2026). Accessed 2026-10-14.
- Leslie's, via Internet Archive. Muriatic Acid 2-Pack of 1 Gallon Bottles (Wayback capture September 16, 2026). Accessed 2026-10-14.
- Pool Construction & Service. Pool Equipment Prices (PC&S research). Accessed 2026-11-01.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.