Skip to content
Clear backyard in-ground pool with shaded corners under a tree
Pool care: algae and water chemistry

Pool Algaecide: Which Type to Use, EPA Label Doses and How to Use It

Pool algaecide is an EPA-registered chemical that kills or prevents algae alongside chlorine: polyquat 60 labels use 11 to 18 fl oz per 10,000 gallons for visible algae, then 2 to 4 fl oz every 5 to 7 days.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓175 registrations counted65 simple quats, 50 polyquats and 36 copper products lead EPA's active pool algaecide list, by PC&S's November 2026 count.
  • ✓13 labels, one tableDose, maintenance, key restriction and swim rule for each product type, with the EPA Reg. No. and label file.
  • ✓Copper math shownA 4 oz Swimtrine dose adds about 0.27 ppm copper per 10,000 gallons; Leslie's says staining may start above 0.6 ppm.
Quick answer
Shock first if algae is visible, then add a labeled algaecide with the pump running: 11 to 17 fl oz per 10,000 gallons of a 60% polyquat such as HTH Non-Foaming 60, or 16 fl oz of Algae Complete 1 hour after the shock. Circulate 24 hours, brush, then dose 2 to 4 fl oz weekly.
11 to 17 fl oz per 10,000 gal
Polyquat 60% visible algae
2 to 4 fl oz every 5 to 7 days
Maintenance
None to 6 hours
Swim wait range
0.6 ppm
Copper staining line
Source: Leslie's

Key takeaways

  • Of 175 active EPA registrations named algaecide or algicide with a swimming pool use site, 65 are simple quats, 50 are polyquats and 36 are copper-only, by PC&S’s count of the EPA Pesticide Product and Label System on November 1, 2026.
  • The 2024 Model Aquatic Health Code Annex says simple quats tend to foam when overdosed, polyquats do not foam even at the maximum label dose, and copper products can stain when pH is not controlled.
  • Label swim waits run from none on Swimtrine (EPA Reg. No. 8959-2) to 15 minutes on BioGuard Algae Complete (5185-513) to 6 hours of filtration with swimmers out on Clor Mor Maintenance Algaecide (69681-20).
  • A 4 oz opening dose of Swimtrine adds about 0.27 ppm of copper to 10,000 gallons by PC&S arithmetic; if no copper leaves, the label program passes Leslie’s 0.6 ppm staining line at week 6 and EPA’s 1.0 mg/L secondary standard at week 12.
  • Algaecide supplements chlorine: HASA, which makes both, says a pool with enough free chlorine for its CYA level may not need a routine algaecide, and the HTH Algae Stop label (1258-1288) says pools with heavy algae growth must be cleaned before use.
  • EPA reviews an algaecide’s toxicology but not its efficacy at registration; California requires efficacy studies, according to the MAHC Annex.

What is pool algaecide, and does your pool need it?

Pool algaecide is an EPA-registered pesticide that kills or prevents algae and works alongside chlorine, not instead of it. HASA says a pool that holds enough free chlorine for its cyanuric acid level, above CDC’s 1 ppm floor (2 ppm with CYA), may not need a routine dose. Algaecide earns its place with chlorine-tolerant mustard or black algae, shady or warm pools that keep relapsing, vacations and winter closing.

Chlorine is itself an algaecide. The 2024 MAHC Annex notes that chlorine and bromine can be registered and used as algaecides, and that most algaecides work when applied at label directions together with frequent, thorough brushing. HASA puts the order plainly: algaecides are supplemental, and the common mistake is pouring one into a pool already taken over by algae and expecting it to clear the water.

Registration is not a performance test. Section 5.7.4.4.4 of the MAHC Annex says EPA does not consider pool algae a public health threat, so it reviews toxicology but does not require an efficacy package; California requires efficacy studies before products are sold there. Every legal product carries an EPA Reg. No., and you can look it up in EPA’s Pesticide Product and Label System to read the accepted label.

What types of pool algaecide are there?

Four families cover almost every product: simple quats (65 of 175 active pool registrations named algaecide), polyquats (50), copper compounds (36 alone, 8 more in blends) and a few chlorine, bromide and silver products. The type decides the side effect: quats can foam, copper can stain, polyquats do neither, and sodium bromide is banned from outdoor pools.

Pool algaecide types by active ingredient: count of active EPA registrations, foaming and staining (November 1, 2026)
TypeActive ingredient on the labelActive pool registrations (of 175)Foams?Stains?Example EPA Reg. Nos.
QuatAlkyl dimethyl benzyl ammonium chloride (ADBAC) or DDAC65Yes, when overdosedNo1258-1077 HTH Algaecide; 69681-20 Clor Mor Maintenance
PolyquatPoly[oxyethylene(dimethyliminio)ethylene(dimethyliminio)ethylene dichloride]50No, even at maximum doseNo1258-1080 HTH Non-Foaming 60; 7616-73 Kem Tek; 57787-2 Combat 30
CopperCopper triethanolamine or ethanolamine complex, or copper sulfate36NoYes, if misused or pH is off8959-2 Swimtrine; 3525-141 Pool Trol; 45729-5 SeaKlear 90-Day
ChlorineTrichlor, dichlor, calcium or sodium hypochlorite9NoBleaching if granules sit on vinyl42177-67 Olympic Granular Algae-Out
Quat + copperCopper complex plus ADBAC5Low quat shareYes5185-382 BioGuard MSA II; 8959-14 Black Algaetrine
Sodium bromideSodium bromide5NoNo8959-52 Yellowtrine (indoor pools only)
Polyquat + copperCopper plus polyquat2NoFull strength stains porous surfaces5185-513 BioGuard Algae Complete; 57787-25 Combat Extra
Bromine (BCDMH)Bromochlorodimethylhydantoin1NoNo5185-420 BioGuard Master BCDMH
SilverNanosilver1NoConcentrate can stain68161-1 Algaedyn
Copper + chlorineCopper sulfate plus dichlor1NoYes7364-46 Tabex Algae Out
Total175Names containing 'algaecide' or 'algicide', status active, swimming pool use site

Sources: EPA PPLS search ALGAECIDE and ALGICIDE, 223 registration records read November 1, 2026, classified by PC&S; foam and stain columns from the 2024 MAHC Annex 5.7.4.4.4 and the EPA labels named. Download CSV

Active EPA pool algaecide registrations by active ingredient type, November 1, 2026 (n=175)Product names containing 'algaecide' or 'algicide' with a swimming pool use site
Active EPA pool algaecide registrations by active ingredient type, November 1, 2026 (n=175)Bar chart: quat 65, polyquat 50, copper 36, chlorine 9, quat plus copper 5, sodium bromide 5, polyquat plus copper 2 and one each of bromine, silver and copper plus chlorine, 175 in total.Quat: 65Quat65Polyquat: 50Polyquat50Copper: 36Copper36Chlorine: 9Chlorine9Quat + copper: 5Quat + copper5Sodium bromide: 5Sodium bromide5Polyquat + copper: 2Polyquat + copper2Bromine (BCDMH): 1Bromine (BCDMH)1Silver: 1Silver1Copper + chlorine: 1Copper + chlorine1

Source: U.S. EPA Pesticide Product and Label System, product name searches ALGAECIDE and ALGICIDE; classified by PC&S. Download chart data (CSV)

Method: we pulled every product name containing ‘algaecide’ or ‘algicide’ from EPA’s label system, kept the 1,427 active names, reduced them to 223 base registrations and kept the 175 whose record lists a swimming pool use site. Products named otherwise, such as some ‘algae killer’ brands, are not in the count, and store brands sold under a distributor number count once under the base registration.

The chemistry names are long, so read the active ingredient line. Polyquat appears as poly[oxyethylene(dimethyliminio)ethylene(dimethyliminio)ethylene dichloride], and EPA’s 2025 and 2026 label amendments call it polixetonium chloride. Simple quats appear as alkyl dimethyl benzyl ammonium chloride. Copper appears as a triethanolamine or ethanolamine complex, or as copper sulfate pentahydrate.

What do EPA algaecide labels say about dose, stains and swimming?

The labels differ more than the bottles suggest. Visible-algae doses per 10,000 gallons run from 4 oz of a copper product to 36 fl oz of a 30% polyquat, maintenance from 1.3 fl oz every 3 to 5 days to 16 fl oz every three months, and swim waits from none to 6 hours. The table lists 13 current labels by type.

Pool algaecide EPA label table: 13 registrations by type, dose per 10,000 gallons, key restriction and swim rule (labels accessed November 1, 2026)
Product typeProductEPA Reg. No.Active ingredientVisible algae or opening dose per 10,000 galMaintenance dose per 10,000 galKey label restrictionSwim againLabel fileLabel URL
Quat 10%HTH Algaecide1258-1077ADBAC 9.96% + 0.04%26 fl oz6.4 fl oz every 3 to 5 daysVacuum after 24 hours; maintenance more often in heat or heavy useSpa use: 15 minutes; pool claim 'immediately swim ready' is optional label textJan 14, 2021https://www3.epa.gov/pesticides/chem_search/ppls/001258-01077-20210114.pdf
Quat 30%HTH Algae Stop1258-1288ADBAC 15% + ethylbenzyl ADBAC 15%8 fl oz2 fl oz every 3 to 5 daysPools with heavy algae must be cleaned first; pump on for several hours15 minutesJun 21, 2022https://www3.epa.gov/pesticides/chem_search/ppls/001258-01288-20220621.pdf
Quat 50%Clor Mor Maintenance Algaecide69681-20ADBAC 49.8% + 0.2%5.2 fl oz (26 oz per 50,000 gal)1.3 fl oz every 3 to 5 days (6.5 oz per 50,000)Free chlorine 1 to 3 ppm first; not with concentrated chlorineAfter at least 6 hours of filtrationDec 22, 2025https://www3.epa.gov/pesticides/chem_search/ppls/069681-00020-20251222.pdf
Polyquat 60%HTH Non-Foaming Algaecide 601258-1080Polyquat 60%11 to 17 fl oz2 to 4 fl oz every 5 to 7 daysRemove settled algae debris by cleaningOptional claim: 'Swim Immediately'Sep 16, 2025https://www3.epa.gov/pesticides/chem_search/ppls/001258-01080-20250916.pdf
Polyquat 60%Kem Tek Algaecide7616-73Polyquat 60%16 oz after shocking to 5 ppm2 to 4 oz weeklyWear waterproof gloves; keep pH 7.2 to 7.615 minutes, only at 3 ppm chlorine or lessMay 20, 2026https://www3.epa.gov/pesticides/chem_search/ppls/007616-00073-20260520.pdf
Polyquat 30%Combat 3057787-2Polyquat 30%24 to 36 fl oz4 to 9 fl oz every 5 to 7 daysDo not mix with concentrated chlorineNot statedJan 21, 2026https://www3.epa.gov/pesticides/chem_search/ppls/057787-00002-20260121.pdf
CopperSwimtrine Algaecide8959-2Copper ethanolamine complex (7.41% copper)4 oz2 oz every 2 weeksDo not exceed label dosing; 0.72 lb copper per gallonImmediately, no waitingApr 14, 2025https://www3.epa.gov/pesticides/chem_search/ppls/008959-00002-20250414.pdf
CopperPool Trol Copper Algaecide3525-141Copper triethanolamine complex 23.5% (7.1% copper)4 oz (2 oz per 5,000 gal)2 oz (1 oz per 5,000 gal)Do not mix with other chemicals; 0.76 lb copper per gallonImmediately, no waitingJul 7, 2026https://www3.epa.gov/pesticides/chem_search/ppls/003525-00141-20260707.pdf
CopperSeaKlear 90-Day Algae Prevention and Remover45729-5Copper sulfate pentahydrate 11.8% (3.0% copper)32 fl oz for severe algae16 fl oz every 3 monthspH 7.2 to 7.8, alkalinity 80 to 120 ppm; use with an EPA-registered sanitizerNot statedAug 26, 2025https://www3.epa.gov/pesticides/chem_search/ppls/045729-00005-20250826.pdf
CopperAlgae Kil CB 757787-17Copper triethanolamine complex 23.4% (7% copper)4 fl oz light, 10 fl oz heavy2 to 5 oz every other weekpH 7.2 to 7.6; never mix products in one pailImmediately, once chlorine is 4 ppm or lessMar 28, 2024https://www3.epa.gov/pesticides/chem_search/ppls/057787-00017-20240328.pdf
Copper + polyquatBioGuard Algae Complete5185-513Copper sulfate pentahydrate 13.07% + polyquat 6.5%16 fl oz, 1 hour after a shock1.5 fl oz weeklyTest for metals first; not for biguanide or peroxide pools; full strength stains porous surfacesPrevention: 15 minutes; treatment: chlorine 1 to 4 ppmJul 16, 2025https://www3.epa.gov/pesticides/chem_search/ppls/005185-00513-20250716.pdf
Copper + quatBioGuard MSA Algaecide II5185-382Copper triethanolamine 23.6% + ADBAC 2.5%8 fl oz, diluted2 fl oz every 2 weeksStain and scale control 2 days after the final treatment15 minutes after a preventive doseAug 6, 2026https://www3.epa.gov/pesticides/chem_search/ppls/005185-00382-20260806.pdf
Sodium bromideYellowtrine8959-52Sodium bromide 98%4 oz, then 1 lb dry chlorine4 oz weekly above 80 F; 2 oz belowNot for use in outdoor poolsA few hours after treatmentApr 15, 2025https://www3.epa.gov/pesticides/chem_search/ppls/008959-00052-20250415.pdf

Sources: EPA-accepted labels on the EPA Pesticide Product and Label System: 1258-1077, 1258-1288, 69681-20, 1258-1080, 7616-73, 57787-2, 8959-2, 3525-141, 45729-5, 57787-17, 5185-513, 5185-382, 8959-52. Doses printed per 5,000 or 50,000 gallons were scaled by PC&S. Download CSV

Three patterns stand out. Strength drives volume: Combat 30 at 30% polyquat calls for 24 to 36 fl oz where HTH Non-Foaming 60 calls for 11 to 17. Copper products are dosed in ounces, not cups, because a gallon of Swimtrine holds 0.72 lb of elemental copper. And several ‘swim immediately’ lines are optional marketing text in brackets on the master label, so the retail bottle may print a stricter rule; the bottle you buy wins.

Mustard and black algae have their own labeled products and doses, such as Black Algaetrine (8959-14) at 12 oz per 10,000 gallons, listed in our mustard algae guide and our black algae treatment guide. The chlorine doses EPA labels set for green water are in our guide on how to clear a green pool. Which algae you have, and how long each type takes to clear, is covered in our guide on how to get rid of algae in a pool.

How much algaecide should you add for your pool size?

Multiply the label’s per-10,000-gallon dose by your gallons divided by 10,000. A 20,000 gallon pool with visible algae takes 22 to 34 fl oz of HTH Non-Foaming 60 or 48 to 72 fl oz of Combat 30, then 4 to 8 or 8 to 18 fl oz per maintenance dose. At Leslie’s $37.99 quart price, a 16-week season of weekly polyquat maintenance costs $75.98 to $151.96.

Pool algaecide dose by pool size for five labels (fluid ounces)
Product and dose10,000 gal15,000 gal20,000 gal30,000 galUnit
HTH Non-Foaming 60 (polyquat 60%), visible algae11 to 1716.5 to 25.522 to 3433 to 51fl oz
HTH Non-Foaming 60, maintenance every 5 to 7 days2 to 43 to 64 to 86 to 12fl oz
Combat 30 (polyquat 30%), visible algae24 to 3636 to 5448 to 7272 to 108fl oz
Combat 30, maintenance every 5 to 7 days4 to 96 to 13.58 to 1812 to 27fl oz
HTH Algaecide (quat 10%), initial26395278fl oz
HTH Algaecide, maintenance every 3 to 5 days6.49.612.819.2fl oz
Swimtrine (copper), opening46812fl oz
Swimtrine, every 2 weeks2346fl oz
BioGuard Algae Complete, visible algae after shock16243248fl oz
BioGuard Algae Complete, weekly1.52.2534.5fl oz

Sources: EPA labels 1258-1080, 57787-2, 1258-1077, 8959-2, 5185-513. Columns other than 10,000 gallons are scaled by PC&S. Download CSV

Worked example: polyquat 60% algaecide cost for a 20,000 gallon pool, one season
StepInputCalculationResult
ProductLeslie's Algae Control, 60% polyquat, 1 qt (32 fl oz) at $37.99 (Wayback capture, Sept 16, 2026)37.99 / 32$1.19 per fl oz
Visible algae, 20,000 galLabel: 11 to 16 fl oz per 10,000 gal22 to 32 fl oz x $1.19$26.12 to $37.99
One maintenance dose, 20,000 galLabel: 2 to 4 fl oz per 10,000 gal every 5 to 7 days4 to 8 fl oz x $1.19$4.75 to $9.50
Swim seasonMedian 114 days of 80 F highs across 60 metros (NOAA 1991 to 2020 normals)114 / 7 = 16.3; use 16 weekly doses16 doses
Season of maintenance16 doses16 x $4.75 to 16 x $9.50$75.98 to $151.96

Sources: Leslie’s Algae Control 1 qt, Wayback capture September 16, 2026; PC&S pool season length index (NOAA 1991 to 2020 normals). Arithmetic by PC&S. Download CSV

The quart price comes from our pool equipment and chemical price index, which tracked the same $37.99 Leslie’s quart listing in captures from May 2024 to September 2026. The 16 weeks come from our swim season index, where the median of 60 metros has 114 days a year with normal highs of 80 F or more; Sun Belt pools run longer seasons and more doses.

How to use algaecide in a pool, step by step

Balance the water, brush, shock first if algae is visible, then add the algaecide with the pump running and keep it running 24 hours. Brush the next day, vacuum, repeat if the label allows, then switch to the maintenance dose. Each step below carries the figure from the label behind it.

  1. Test and balanceSet pH to 7.2 to 7.6 (Algae Complete, Kem Tek) and free chlorine to your normal range; Clor Mor’s quat label wants 1 to 3 ppm before dosing.
  2. Check metals before copperThe Algae Complete label says test for metals first. Above 0.6 ppm copper, Leslie’s warns staining may occur; pick a polyquat instead.
  3. Brush and vacuumLabels start with cleaning: HTH Non-Foaming 60 says remove settled algae debris, and HTH Algae Stop says pools with heavy growth must be cleaned before use.
  4. Shock first if algae is visibleAlgae Complete: add a shock, circulate 1 hour, then the algaecide. Kem Tek: shock to 5 ppm, then 16 oz per 10,000 gallons.
  5. Dose with the pump runningPour the measured dose where growth is heaviest or around the edge, never premixed with chlorine. Pro Algaecide bars mixing with concentrated chlorine.
  6. Circulate 24 hoursAlgae Complete asks for continuous circulation for 24 hours; Clor Mor for at least 6 hours with no swimmers.
  7. Brush, vacuum and repeat if neededBrush the next day and vacuum dead algae after 24 hours. Algae Complete repeats after 2 to 4 days; MSA II adds a stain and scale control 2 days after the last dose.
  8. Switch to maintenancePolyquat 60%: 2 to 4 fl oz per 10,000 gallons every 5 to 7 days. Algae Complete: 1.5 fl oz weekly. Swimtrine: 2 oz every 2 weeks.
How to use algaecide: what several guides say vs what the labels and primary sources say
What a guide saysWhat the label or primary source saysSources
Simplified Pools: add algaecide 24 to 48 hours after shocking, once chlorine is back to 2 to 5 ppmBioGuard Algae Complete label: shock, circulate 1 hour, then add 16 fl oz; Kem Tek label: shock to 5 ppm, then the 16 oz algaecide doseSimplified Pools; EPA labels 5185-513 and 7616-73
Poolonomics: wait 10 to 15 minutes before swimming; Hunker: about 30 minutesLabels run from no wait (Swimtrine) to 15 minutes (Algae Complete) to 6 hours of filtration (Clor Mor Maintenance)Poolonomics; Hunker; EPA labels 8959-2, 5185-513, 69681-20
Beatbot: the typical dose is 1 to 4 oz per 10,000 gallonsLabel doses per 10,000 gal run from 1.3 fl oz (Clor Mor maintenance) to 36 fl oz (Combat 30, visible algae)Beatbot; EPA labels 69681-20 and 57787-2
Pool Research: most algaecides on the market have a copper base44 of 175 active pool registrations named algaecide or algicide contain copper; 115 are quats or polyquatsPool Research; EPA PPLS count by PC&S
HTH Algae Guard Advanced page: chlorine above 5 ppm can deactivate algaecide; wait 24 hours after shockingHASA: high chlorine can oxidize polyquat; the Algae Complete label still doses 1 hour after a shockHTH; HASA; EPA label 5185-513

Sources: Simplified Pools; Poolonomics; Hunker; Beatbot; Pool Research; HTH Algae Guard Advanced; HASA; EPA labels 5185-513, 7616-73, 8959-2, 69681-20, 57787-2; EPA PPLS count by PC&S. Accessed November 2026. Download CSV

The shock-then-algaecide timing is where makers disagree most. The HTH Algae Guard Advanced page says chlorine above 5 ppm can deactivate algaecide and to wait 24 hours, and HASA says high chlorine can oxidize polyquat, yet the Algae Complete label doses 1 hour after a shock. Follow the label of the product you hold; our pool shock guide gives the chlorine side of the dose.

How long after adding algaecide can you swim?

As long as the label says, which runs from no wait to 6 hours. Swimtrine and Pool Trol allow swimming immediately, HTH Algae Stop, Algae Complete and MSA II say 15 minutes, Kem Tek allows 15 minutes only at 3 ppm chlorine or less, and Clor Mor Maintenance keeps swimmers out for 6 hours of filtration.

Swim waits after algaecide, as printed on nine EPA labels
Product (EPA Reg. No.)TypeWhat the label says about swimmingMinutes (for the chart)
Swimtrine (8959-2)CopperTreated water can be used immediately, no waiting0
Pool Trol Copper Algaecide (3525-141)CopperCan be used immediately, no waiting0
Algae Kil CB 7 (57787-17)CopperResume immediately when chlorine is at or below 4 ppm0
HTH Algae Stop (1258-1288)Quat 30%Wait 15 minutes before entering pool15
BioGuard Algae Complete (5185-513), preventionCopper + polyquatWait at least 15 minutes; after a treatment dose, chlorine 1 to 4 ppm15
BioGuard MSA Algaecide II (5185-382), preventionCopper + quatWait at least 15 minutes15
Kem Tek Algaecide (7616-73)Polyquat 60%15 minutes, only when chlorine is 3 ppm or less15
Yellowtrine (8959-52)Sodium bromideSwimming may resume a few hours after treatment
Clor Mor Maintenance Algaecide (69681-20)Quat 50%Run the filter at least 6 hours; no swimmers during that time360

Sources: EPA labels 8959-2, 3525-141, 57787-17, 1258-1288, 5185-513, 5185-382, 7616-73, 8959-52, 69681-20. Accessed November 1, 2026. Download CSV

How long to wait before swimming after algaecide, by EPA label (minutes)0 means the label allows swimming immediately
How long to wait before swimming after algaecide, by EPA label (minutes)Bar chart: three copper products allow swimming immediately, four products require 15 minutes, and Clor Mor Maintenance requires 360 minutes of filtration first.Swimtrine (copper): 0Swimtrine (copper)0Pool Trol Copper: 0Pool Trol Copper0Algae Kil CB 7 (at 4 ppm chlorine or less): 0Algae Kil CB 7 (at 4 ppm chlorine or less)0HTH Algae Stop (quat 30%): 15HTH Algae Stop (quat 30%)15BioGuard Algae Complete (prevention): 15BioGuard Algae Complete (prevention)15BioGuard MSA Algaecide II (prevention): 15BioGuard MSA Algaecide II (prevention)15Kem Tek (at 3 ppm chlorine or less): 15Kem Tek (at 3 ppm chlorine or less)15Clor Mor Maintenance (quat 50%): 360Clor Mor Maintenance (quat 50%)360

Source: EPA labels 8959-2, 3525-141, 57787-17, 1258-1288, 5185-513, 5185-382, 7616-73, 69681-20. Accessed November 1, 2026. Download chart data (CSV)

The Clor Mor Maintenance Algaecide label (EPA Reg. No. 69681-20, file dated December 22, 2025) keeps swimmers out for at least six hours of filtration and doses 26 oz per 50,000 gallons for algae, 6.5 oz for maintenance. Accessed November 1, 2026; red boxes added by PC&S.
The Clor Mor Maintenance Algaecide label (EPA Reg. No. 69681-20, file dated December 22, 2025) keeps swimmers out for at least six hours of filtration and doses 26 oz per 50,000 gallons for algae, 6.5 oz for maintenance. Accessed November 1, 2026; red boxes added by PC&S.

After a shock-plus-algaecide treatment, the chlorine sets the wait, not the algaecide: Algae Complete bars re-entry until free chlorine is 1 to 4 ppm. How fast a shock drops to that level is covered in our guide on how long after shocking a pool you can swim.

Why does algaecide foam, and how do you avoid it?

Foam comes from simple quats, which are surfactants. The 2024 MAHC Annex says simple quats tend to foam when overdosed, especially in pools with fountains or waterfalls, while polyquats do not foam even at the maximum label dose. Avoid it by measuring the dose for your real gallons or by using a polyquat where water splashes.

  • Measure gallons first: an initial dose of HTH Algaecide (quat 10%) is 26 fl oz per 10,000 gallons, so guessing 15,000 gallons in a 10,000 gallon pool adds 13 fl oz more than the label rate.
  • Stronger quat, smaller pour: HTH Algae Stop at 30% quat starts at 8 fl oz per 10,000 gallons and Clor Mor at 50% at 5.2 fl oz; the same cup of the wrong bottle is a large overdose.
  • Water features: the MAHC Annex singles out fountains and waterfalls for quat foam; Pro Algaecide markets its polyquat as ideal for pools with attached spas.
  • Read ‘non-foaming’ with care: the HTH Algaecide and Algae Stop master labels list ‘non-foaming’ as optional text even though both are simple quats, the type the MAHC Annex says foams when overdosed.

Will copper algaecide stain your pool?

It can, and the limits are close together. Leslie’s says staining may occur above 0.6 ppm copper, EPA links copper above 1.0 mg/L to blue-green staining, and the MAHC caps copper ion systems at 1.3 ppm. A 4 oz Swimtrine dose adds about 0.27 ppm to 10,000 gallons, so a full program can reach the first line in six weeks if no copper leaves. If blue-green marks have already formed, our pool stains guide shows how to confirm copper and lift it without draining.

Copper added per label dose, and the copper limits it is measured against
Product or limitDose per 10,000 galCopper in the labelCopper added (PC&S arithmetic)Source
Swimtrine (8959-2), opening4 oz0.72 lb per gallon0.27 ppmEPA label 8959-2
Swimtrine, each 2-week maintenance2 oz0.72 lb per gallon0.13 ppmEPA label 8959-2
Pool Trol Copper (3525-141), initial4 oz0.76 lb per gallon0.28 ppmEPA label 3525-141
Black Algaetrine (8959-14), black algae12 oz0.27 lb per gallon0.30 ppmEPA label 8959-14 (PC&S black algae guide)
Staining may occur above0.6 ppmLeslie's black algae guide
EPA secondary standard (blue-green staining)1.0 mg/LEPA secondary drinking water standards
MAHC maximum for copper ion systems1.3 ppm2024 MAHC 5.7.3.2.3.2

Sources: EPA labels 8959-2, 3525-141, 8959-14; Leslie’s black algae guide; EPA secondary standards (May 2026); 2024 MAHC 5.7.3.2.3.2; NIST conversions. Copper ppm is PC&S arithmetic: fl oz / 128 x lb copper per gallon x 453.6 g / 37,854 L. Download CSV

Copper (ppm) if no copper leaves the pool: Swimtrine label program, 10,000 gallonsPC&S arithmetic: 4 oz opening dose, then 2 oz every 2 weeks; real pools lose copper to backwash and splash-out
Copper (ppm) if no copper leaves the pool: Swimtrine label program, 10,000 gallonsLine chart: copper rises from 0.27 ppm at week 0 to 0.67 at week 6, 1.08 at week 12 and 1.35 at week 16, crossing the 0.6, 1.0 and 1.3 ppm lines.00.380.751.11.50246810121416Swimtrine, no copper lost, 0: 0.27Swimtrine, no copper lost, 2: 0.4Swimtrine, no copper lost, 4: 0.54Swimtrine, no copper lost, 6: 0.67Swimtrine, no copper lost, 8: 0.81Swimtrine, no copper lost, 10: 0.94Swimtrine, no copper lost, 12: 1.1Swimtrine, no copper lost, 14: 1.2Swimtrine, no copper lost, 16: 1.4Swimtrine, no copper lostStaining line 0.6, 0: 0.6Staining line 0.6, 2: 0.6Staining line 0.6, 4: 0.6Staining line 0.6, 6: 0.6Staining line 0.6, 8: 0.6Staining line 0.6, 10: 0.6Staining line 0.6, 12: 0.6Staining line 0.6, 14: 0.6Staining line 0.6, 16: 0.6Staining line 0.6EPA 1.0, 0: 1EPA 1.0, 2: 1EPA 1.0, 4: 1EPA 1.0, 6: 1EPA 1.0, 8: 1EPA 1.0, 10: 1EPA 1.0, 12: 1EPA 1.0, 14: 1EPA 1.0, 16: 1EPA 1.0MAHC 1.3, 0: 1.3MAHC 1.3, 2: 1.3MAHC 1.3, 4: 1.3MAHC 1.3, 6: 1.3MAHC 1.3, 8: 1.3MAHC 1.3, 10: 1.3MAHC 1.3, 12: 1.3MAHC 1.3, 14: 1.3MAHC 1.3, 16: 1.3MAHC 1.3

Source: EPA label 8959-2 (0.72 lb copper per gallon); Leslie's; EPA secondary standards (May 2026); 2024 MAHC 5.7.3.2.3.2; NIST conversions. Download chart data (CSV)

The chart is a ceiling, not a forecast: backwashing, splash-out, rain and precipitation all remove copper, so test it rather than assume. pH is the lever. The MAHC Annex calls pH control very important to minimize staining with copper algaecides, and the SeaKlear label (45729-5) sets pH 7.2 to 7.8 and alkalinity 80 to 120 ppm. Above that label’s 7.8 pH ceiling, hold off on copper until pH is back down.

Two setups should skip copper entirely. The MAHC Annex says copper-based algaecides should not go into pools with copper and silver ion systems, and that copper speeds the formation of trihalomethanes during chlorination. And the MSA Algaecide II label itself recommends a stain and scale control 2 days after the last treatment to pull leftover copper out of the water. Which copper ionizers hold an EPA registration, and the copper range each label sets, are listed in our pool ionizer guide.

Rather have a pro handle the algae?

Algaecide or shock: which does your pool need?

Shock kills a bloom; algaecide prevents the next one or finishes chlorine-tolerant growth. If the water is green or cloudy, shock and filter first. If chlorine holds and algae stays away, skip routine algaecide. Use a labeled algaecide for mustard or black algae, vacations and winter, and pick the type by your water features, a copper reading of 0.6 ppm or more, and your sanitizer.

Pool algaecide key numbers, with the source of each
NumberWhat it meansSource
175Active EPA registrations named algaecide or algicide with a swimming pool use site, November 1, 2026EPA PPLS, counted by PC&S
11 to 17 fl ozHTH Non-Foaming 60 dose per 10,000 gal for visible algaeEPA label 1258-1080
2 to 4 fl ozPolyquat 60% maintenance per 10,000 gal every 5 to 7 daysEPA labels 1258-1080, 3525-117
0 to 6 hoursRange of label swim waitsEPA labels 8959-2, 69681-20
0.27 ppmCopper from a 4 oz opening dose of Swimtrine in 10,000 gal (PC&S arithmetic)EPA label 8959-2
0.6 ppmCopper level above which Leslie's says staining may occurLeslie's
1.0 mg/LEPA secondary standard for copper (blue-green staining)EPA
1.3 ppmMAHC maximum copper for copper ion systems at public pools2024 MAHC 5.7.3.2.3.2
1 to 4 ppmFree chlorine window before re-entry after an Algae Complete treatment doseEPA label 5185-513

Sources: EPA PPLS; EPA labels 1258-1080, 3525-117, 8959-2, 69681-20, 5185-513; Leslie’s; EPA; 2024 MAHC. Accessed November 2026. Download CSV

Algaecide decision table: if your situation is X, do Y
If your situation isDo thisWhy (source)
Water is green or you cannot see the floorShock to the label algae dose and filter; algaecide comes after, not insteadHTH Algae Stop label 1258-1288: heavy growth must be cleaned first; HASA
Free chlorine holds at the level your CYA needs and no algae returnsSkip routine algaecideHASA: a properly maintained pool may not need a routine algaecide
Yellow dust in shady spots that returns after brushingShock plus an algaecide labeled for mustard algaeEPA labels 5185-513, 3525-117; PC&S mustard algae guide
Raised dark spots in plasterBrush hard, then a product labeled for black algaeEPA label 8959-14; PC&S black algae guide
Fountains, waterfalls or a spillover spaUse a polyquat, not a simple quatMAHC Annex 5.7.4.4.4: simple quats foam when overdosed
Copper already reads 0.6 ppm or more, or a copper ionizer is installedUse a polyquat; no copper algaecideLeslie's; MAHC Annex 5.7.3.2.3
Biguanide (non-chlorine) sanitizerDo not use Algae CompleteEPA label 5185-513
Outdoor pool and a sodium bromide productDo not use it; the label bars outdoor poolsEPA label 8959-52
Leaving the pool for a week or closing for winterAdd the label vacation or winter dose (Clor Mor: 4.8 oz per 10,000 gal per week)EPA labels 69681-20, 1258-1080

Sources: HASA; 2024 MAHC Annex; Leslie’s; EPA labels 1258-1080, 5185-513, 3525-117, 8959-14, 8959-52, 69681-20. Accessed November 2026. Download CSV

Algaecide or shock decision flowchart built by PC&S from EPA labels 1258-1080, 5185-513, 8959-52 and 69681-20, the 2024 MAHC Annex, HASA and Leslie's, November 2026. The decision table above holds the same steps as text.
Algaecide or shock decision flowchart built by PC&S from EPA labels 1258-1080, 5185-513, 8959-52 and 69681-20, the 2024 MAHC Annex, HASA and Leslie’s, November 2026. The decision table above holds the same steps as text.

Closing is the most common planned use. The HTH Non-Foaming 60 label sets a winter dose of 9 fl oz per 10,000 gallons, or 16 fl oz if some algae is visible, and our guide on how to winterize a pool places it after the closing shock. If cloudiness rather than algae is the problem after treatment, our pool flocculant guide covers clarifier and floc doses.

Algaecide safety rules from the labels

Treat algaecide as the pesticide it is. Wear the gloves the label names, add it to water separately and never premix it with chlorine, keep children away from the bottle, and drain treated water only where local authorities allow. CDC counts about 4,500 emergency department visits a year from pool chemical injuries, at least one third of them in people under 18.

How we compiled this

We read 22 EPA-accepted algaecide labels (17 are cited) and 223 registration records from EPA’s Pesticide Product and Label System on November 1, 2026, plus the 2024 Model Aquatic Health Code and Annex, EPA and CDC guidance, a HASA technical blog, HTH and Leslie’s product pages and two PC&S research reports. Doses for other pool sizes, copper ppm and costs are PC&S arithmetic. We did not test any product; five consumer guides appear only where we compare their claims with the labels, and forum posts were excluded as a source of facts.

Frequently Asked Questions

How long after adding algaecide can I swim?

Check the label: it ranges from no wait to 6 hours. Swimtrine (8959-2) allows swimming immediately, HTH Algae Stop and BioGuard Algae Complete say 15 minutes, and Clor Mor Maintenance (69681-20) keeps swimmers out for at least 6 hours of filtration. After a shock-plus-algaecide treatment, Algae Complete adds a second test: free chlorine must be 1 to 4 ppm.

Can I add algaecide and chlorine at the same time?

Not mixed together. Pro Algaecide and Combat 30 bar mixing with concentrated chlorine, and Algae Kil CB 7 says never mix products in the same bottle or pail. In sequence they are designed to work together: the Algae Complete label adds 16 fl oz per 10,000 gallons 1 hour after a shock, and Kem Tek doses 16 oz after shocking to 5 ppm.

Do you put algaecide or shock first?

Shock first when algae is visible. The Algae Complete label circulates a shock for 1 hour before the algaecide, and Kem Tek shocks to 5 ppm first. The HTH Algae Guard Advanced page goes further, saying chlorine above 5 ppm can deactivate algaecide and to wait 24 hours, so follow the timing on your own bottle.

Why does my pool foam after I add algaecide?

You most likely used a simple quat and overdosed it. The 2024 MAHC Annex says simple quats tend to foam when overdosed, especially with fountains or waterfalls, while polyquats do not foam even at the maximum label dose. Check your gallons and the strength: a 50% quat such as Clor Mor needs 5.2 fl oz per 10,000 gallons.

Should I use algaecide every week?

Only if your label program and your pool call for it. Polyquat 60% labels set 2 to 4 fl oz per 10,000 gallons every 5 to 7 days and Algae Complete 1.5 fl oz weekly, but HASA says a pool with enough free chlorine for its CYA level may not need routine algaecide. A 16-week season costs $75.98 to $151.96 for 20,000 gallons.

Will algaecide clear a green pool?

Not on its own. The HTH Algae Stop label (1258-1288) says pools with heavy algae growth must be cleaned before use, and HASA calls algaecide-only treatment of a green pool a common mistake. Shock to the label algae dose, filter and vacuum first; EPA label 1258-1250 doses a severe bloom at 2.6 lb of 52% calcium hypochlorite per 10,000 gallons.

Sources

  1. U.S. Environmental Protection Agency. Pesticide Product and Label System, product name search ALGAECIDE (November 1, 2026). Accessed 2026-11-01.
  2. U.S. Environmental Protection Agency. Pesticide Product and Label System, product name search ALGICIDE (November 1, 2026). Accessed 2026-11-01.
  3. U.S. EPA Pesticide Product and Label System. HTH Algaecide, EPA Reg. No. 1258-1077, label file dated 2021-01-14. Accessed 2026-11-01.
  4. U.S. EPA Pesticide Product and Label System. HTH Algae Stop, EPA Reg. No. 1258-1288, label file dated 2022-06-21. Accessed 2026-11-01.
  5. U.S. EPA Pesticide Product and Label System. Clor Mor Maintenance Algaecide, EPA Reg. No. 69681-20, label file dated 2025-12-22. Accessed 2026-11-01.
  6. U.S. EPA Pesticide Product and Label System. HTH Non-Foaming Algaecide 60, EPA Reg. No. 1258-1080, label file dated 2025-09-16. Accessed 2026-11-01.
  7. U.S. EPA Pesticide Product and Label System. Kem Tek Algaecide, EPA Reg. No. 7616-73, label file dated 2026-05-20. Accessed 2026-11-01.
  8. U.S. EPA Pesticide Product and Label System. Combat 30, EPA Reg. No. 57787-2, label file dated 2026-01-21. Accessed 2026-11-01.
  9. U.S. EPA Pesticide Product and Label System. Swimtrine Algaecide, EPA Reg. No. 8959-2, label file dated 2025-04-14. Accessed 2026-11-01.
  10. U.S. EPA Pesticide Product and Label System. Pool Trol Copper Algaecide, EPA Reg. No. 3525-141, label file dated 2026-07-07. Accessed 2026-11-01.
  11. U.S. EPA Pesticide Product and Label System. Algitec 7.0, EPA Reg. No. 3432-79, label file dated 2026-05-26. Accessed 2026-11-01.
  12. U.S. EPA Pesticide Product and Label System. SeaKlear Algae Prevention and Remover, EPA Reg. No. 45729-5, label file dated 2025-08-26. Accessed 2026-11-01.
  13. U.S. EPA Pesticide Product and Label System. Algae Kil CB 7, EPA Reg. No. 57787-17, label file dated 2024-03-28. Accessed 2026-11-01.
  14. U.S. EPA Pesticide Product and Label System. BioGuard Algae Complete (BioLab T-0041), EPA Reg. No. 5185-513, label file dated 2025-07-16. Accessed 2026-11-01.
  15. U.S. EPA Pesticide Product and Label System. BioGuard MSA Algaecide II, EPA Reg. No. 5185-382, label file dated 2026-08-06. Accessed 2026-11-01.
  16. U.S. EPA Pesticide Product and Label System. Yellowtrine, EPA Reg. No. 8959-52, label file dated 2025-04-15. Accessed 2026-11-01.
  17. U.S. EPA Pesticide Product and Label System. Pro Algaecide, EPA Reg. No. 3432-31, label file dated 2025-07-17. Accessed 2026-11-01.
  18. U.S. EPA Pesticide Product and Label System. Algon 60 Algaecide, EPA Reg. No. 3525-117, label file dated 2019-04-03. Accessed 2026-11-01.
  19. U.S. EPA Pesticide Product and Label System. Black Algaetrine, EPA Reg. No. 8959-14, label file dated 2026-10-08. Accessed 2026-11-01.
  20. Centers for Disease Control and Prevention. 2024 Model Aquatic Health Code, 5th Edition, Code Language. Accessed 2026-11-01.
  21. Centers for Disease Control and Prevention. 2024 Model Aquatic Health Code, 5th Edition, Annex. Accessed 2026-11-01.
  22. U.S. Environmental Protection Agency. Secondary Drinking Water Standards: Guidance for Nuisance Chemicals (updated May 26, 2026). Accessed 2026-11-01.
  23. Centers for Disease Control and Prevention. Home Pool and Hot Tub Water Treatment and Testing (May 10, 2024). Accessed 2026-11-01.
  24. Centers for Disease Control and Prevention. Pool Chemical Emergencies (May 28, 2025). Accessed 2026-11-01.
  25. HASA (manufacturer). Do You Need an Algaecide? When and Why to Use One. Accessed 2026-11-01.
  26. HTH (manufacturer). HTH Pool Care Algae Guard Advanced. Accessed 2026-11-01.
  27. Leslie's (retailer). How to Treat Black Algae in Your Pool. Accessed 2026-11-01.
  28. Leslie's via PC&S pool equipment price index. Leslie's Algae Control 1 qt (Wayback Machine capture September 16, 2026). Accessed 2026-11-01.
  29. National Institute of Standards and Technology. Approximate Conversions from U.S. Customary Measures to Metric. Accessed 2026-11-01.
  30. PC&S research. Pool Season Length by City (NOAA 1991 to 2020 normals). Accessed 2026-11-01.
  31. NOAA National Centers for Environmental Information. U.S. Climate Normals. Accessed 2026-11-01.
  32. PC&S research. Pool Equipment Prices 2026. Accessed 2026-11-01.
  33. Simplified Pools (retailer blog). Pool Algaecide Guide: Types, When to Use Them (guide claims compared). Accessed 2026-11-01.
  34. Poolonomics. Best Pool Algaecide (guide claims compared). Accessed 2026-11-01.
  35. Hunker. How To Use Algaecide (guide claims compared). Accessed 2026-11-01.
  36. Beatbot (manufacturer blog). How to Use Algaecide in Swimming Pools the Right Way (guide claims compared). Accessed 2026-11-01.
  37. Pool Research. A Guide to Using Algaecide in Your Pool (guide claims compared). Accessed 2026-11-01.
  38. U.S. EPA Pesticide Product and Label System. Arch 52% Calcium Hypochlorite, EPA Reg. No. 1258-1250, draft label dated July 12, 2021. Accessed 2026-11-01.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.