
Pool Water Features: Flow Specs, Costs, Pump Sizing and Evaporation for Every Type
Pool water features range from 3 gpm deck jets to 90 gpm scuppers; installed costs run $200 to $15,000 per feature (Fixr, 2025), and each hour of splashing adds evaporation and pump power.
- ✓10 features, maker flow figuresPentair, ARG, Grand Effects and Jandy sheets and listings with gpm, head and a dated price.
- ✓Pump math you can checkA worked example from feature flows to a pump test point and a yearly power bill.
- ✓Evaporation and heat in dollarsExtra gallons by city and the heat each 1,000 gallons carries away.
Key takeaways
- Pentair rates its MagicStream Laminar at 10 gpm with 16 ft of head at the nozzle for a 7 ft high, 8 ft long arc, and its MagicStream Deck Jet II at 3 to 5 gpm (Pentair laminar guide; Deck Jet II sheet).
- A 1/4 in sheet of water over an edge needs 7 to 10 gpm per foot and a 1 in sheet about 36 gpm per foot (Pool & Spa Marketing), so a 3 ft waterfall running a 1 in sheet draws more than ten laminars.
- Fixr lists installed pool additions at $200 to $15,000 for a fountain, $250 to $15,000 for a waterfall, $5,000 to $10,000 for a grotto and $4,000 to $8,000 for fire bowls (Fixr, updated January 31, 2025).
- EPA WaterSense says the higher a feature’s flow, the more water it loses to evaporation, and that features which fall rather than shoot up lose less (EPA tech sheet, July 2023).
- Every 1,000 gallons that evaporates from a heated pool takes 8.75 million Btu with it: about $93.85 of heat pump heat or $272.36 of gas at July 2026 US prices (NIST WebBook; PC&S cost-to-heat study).
What are the main types of pool water features?
Pool water features fall into nine groups: deck jets, laminar jets, bubblers, rain curtains, scuppers, sheer descents, water or fire and water bowls, spillover spas, and rock waterfalls or grottos. They differ most in flow, from 3 to 5 gpm for a Pentair deck jet to 36 to 45 gpm for a 36 in sheet waterfall, and flow sets pump size and running cost.
| Measure | Figure | Date and scope | Source |
|---|---|---|---|
| Laminar jet flow for its full arc | 10 gpm at 16 ft of head | Pentair MagicStream Laminar, guide P/N 590033 Rev D (2013) | Pentair |
| Deck jet flow | 3 to 5 gpm at 3.9 to 11.0 ft of head | Pentair MagicStream Deck Jet II, sheet P/N 590043 Rev E (2024) | Pentair |
| Sheet of water over an edge | 7 to 10 gpm per ft for a 1/4 in sheet; 36 gpm per ft for 1 in | Trade hydraulics article, undated | Pool & Spa Marketing |
| Rain curtain flow | 1 to 2 gpm per ft | Grand Effects R-48-S listing, Nov 2, 2026 | ePoolSupply |
| Installed cost: fountain; waterfall; grotto; fire bowls | $200 to $15,000; $250 to $15,000; $5,000 to $10,000; $4,000 to $8,000 | US, updated Jan 31, 2025 | Fixr |
| Variable speed pump power at 62.9 gpm | 762.6 W (median of 193 models) | ENERGY STAR dataset, updated Oct 2, 2026 | U.S. EPA ENERGY STAR |
| Feature pump at 762.6 W, 4 h a day | $202.19 a year | US average 18.16 cents per kWh, Aug 2026 | EIA; PC&S arithmetic |
| Heat carried off by evaporation | 8.75 million Btu per 1,000 gallons | Water at 80 F | NIST Chemistry WebBook; USGS; PC&S arithmetic |
| Evaporation activity factor: recreational pool; spa; wave pool or slides | 0.5; 1.0; 1.5 to 2.0 | ASHRAE method as documented for EnergyPlus | EnergyPlus Engineering Reference |
Sources: Pentair P/N 590033 Rev D; Pentair P/N 590043 Rev E; Pool & Spa Marketing; ePoolSupply; Fixr; ENERGY STAR; EIA Table 5.6.A; NIST; USGS; EnergyPlus Engineering Reference; PC&S arithmetic. Download CSV
| Feature | What it does | Flow per unit | Fits a small pool? | Source |
|---|---|---|---|---|
| Deck jet | Arcs of water from the deck into the pool | 3 to 5 gpm | Yes | Pentair P/N 590043 Rev E |
| Laminar jet | Glass-smooth lit arc up to 7 ft high and 8 ft long | 10 gpm | Yes | Pentair P/N 590033 Rev D |
| Bubbler | Water column rising through 2 to 10 in of water | 15 to 45 gpm | Yes, on a sun shelf | Pentair 2023 catalog |
| Rain curtain | Thin rain drops from an overhead or wall bar | 1 to 2 gpm per ft | Yes | Grand Effects R-48-S listing |
| Scupper | Spout or box pouring from a wall | 15 to 20 gpm (12 in); 25 to 30 gpm per ft (flow scupper) | Yes, one or two | Grand Effects US-12, SFC-36-6 listings |
| Sheer descent | Smooth sheet from a lip set in a raised wall | 1 to 1.25 gpm per inch | Yes, 12 to 36 in | ARG WF3606ACL listing |
| Water or fire and water bowl | Bowl spilling into the pool; fire version burns gas | 10 to 15 gpm (24 in bowl); 85,000 Btu burner | Space dependent | Grand Effects and Pentair listings |
| Spillover spa | Raised spa overflowing into the pool | 7 to 10 gpm per ft of spillway for a 1/4 in sheet | Needs room for a spa | Pool & Spa Marketing |
| Rock waterfall or grotto | Boulders, natural or faux, with falling water; a grotto adds a cave | Sized by sheet thickness: up to 36 gpm per ft for 1 in | Rarely | Pool & Spa Marketing; Fixr cost |
Sources: Pentair, Pentair, Pentair 2023 catalog, Grand Effects and ARG listings at ePoolSupply, Pool & Spa Marketing, Fixr. Download CSV

Modern pool water features lean on clean lines: laminars, sheer descents, scuppers and rain curtains set into a raised wall or the deck. Pentair’s MagicFalls line, for example, comes in widths from 8 inches to 8 feet in sheet, curtain and rainfall effects, and the catalog says a variable speed pump can vary flow to change the height and distance of the water (Pentair 2023 water features catalog).
What is a pool bubbler, and how is it different from a pool fountain? A bubbler pushes a column of water up through shallow water, usually on a sun shelf. Pentair’s ColorVision bubbler is designed for 2 to 10 in of water, and its plume chart runs from 15 to 45 gpm, with a 12 VAC, 15 W GloBrite LED in the niche. A fountain sprays above the surface instead, and Fixr prices a pool fountain at $200 to $15,000 installed.
What is a pool grotto? A grotto is a cave or overhang built behind a rock waterfall, so swimmers can sit under the falling water. Fixr prices a grotto at $5,000 to $10,000, and Simplified Pools, a Dallas-Fort Worth pool company, prices a large waterfall with a grotto at $10,000 to $30,000 or more (February 2026). Faux rock runs 20% to 40% less than natural rock, by the same source.
How much water does each pool water feature need?
Flow runs from 3 gpm to about 90 gpm per feature on maker and seller sheets read November 2, 2026. Deck jets (3 to 5 gpm) and laminars (10 gpm) are low-flow; water bowls (10 to 15 gpm) and 12 in scuppers (15 to 20 gpm) sit in the middle; bubblers, sheet waterfalls and flow scuppers sized per foot of width draw the most.
| Feature | Product checked (maker, model) | Flow the maker or seller states | Head, power or fuel | Price seen Nov 2, 2026 | Source |
|---|---|---|---|---|---|
| Deck jet | Pentair MagicStream Deck Jet II, P/N 580003 | 3 to 5 gpm per jet | 3.9 to 11.0 ft of head; no electrical | $399.95 for a pack of 4 (ePoolSupply) | Pentair sheet P/N 590043 Rev E (2024) |
| Laminar jet | Pentair MagicStream Laminar, 580001T | 10 gpm for a 7 ft high, 8 ft long arc | 16 ft of head at the laminar; 12 VAC, 16 W LED | $999.95 (ePoolSupply) | Pentair guide P/N 590033 Rev D (2013); Pentair 2023 catalog |
| Sheet waterfall (sheer descent) | ARG 36 in waterfall, 6 in lip, WF3606ACL | 1 to 1.25 gpm per inch, about 36 to 45 gpm | No electrical | $315.95 (ePoolSupply); Jandy 3 ft Sheer Descent 1103003 at $228.95 | ePoolSupply listings |
| Rain curtain | Grand Effects R-48-S, 48 in stainless | 4 to 8 gpm (1 to 2 gpm per ft) | Dedicated booster pump advised; listing says not for saltwater | $3,899.95 (ePoolSupply) | ePoolSupply listing |
| Scupper, 12 in | Grand Effects US-12, copper | 15 to 20 gpm | 1.5 in inlet; no electrical | $899.95 (ePoolSupply) | ePoolSupply listing |
| Scupper, 36 in | Grand Effects SFC-36-6, copper, 6 in lip | 25 to 30 gpm per ft of width (75 to 90 gpm) | No electrical | $1,099.95 (ePoolSupply) | ePoolSupply listing |
| Bubbler | Pentair ColorVision bubbler niche, 580037 (gunite) | 15 to 45 gpm on its plume chart | For 2 to 10 in of water; 12 VAC, 15 W GloBrite LED | Not priced | Pentair 2023 catalog |
| Water bowl | Grand Effects 24 x 7 in Corinthian, WBSLCORMET24L | 10 to 15 gpm | 1.5 or 2 in plumbing; no electrical | $1,750.95 (ePoolSupply) | ePoolSupply listing |
| Fire and water bowl | Pentair MagicFlame square 32 in, 580189 | Spillway; flow not stated in the listing | 85,000 Btu natural gas burner; 12 VAC ignition | $4,000.95 (ePoolSupply) | ePoolSupply listing |
| Spillover or long edge | Any sheet over a square edge | 7 to 10 gpm per ft (1/4 in sheet); 36 gpm per ft (1 in sheet) | Pump sized to edge length | Not a product | Pool & Spa Marketing hydraulics article |
Sources: Pentair Deck Jet II sheet P/N 590043 Rev E (2024); Pentair laminar guide P/N 590033 Rev D (2013); Pentair 2023 water features catalog; Pool & Spa Marketing. Listings at ePoolSupply read November 2, 2026: Deck Jet II 4-pack, MagicStream Laminar, ARG 36 in waterfall, Jandy Sheer Descent, Grand Effects rain curtain, US-12 scupper, SFC-36-6 scupper, water bowl, MagicFlame bowl. Download CSV
Source: Pentair sheets P/N 590043 Rev E and 590033 Rev D; Pentair 2023 catalog; Grand Effects and ARG listings at ePoolSupply (Nov 2, 2026); Pool & Spa Marketing. PC&S arithmetic for 3 ft widths. Download chart data (CSV)
Per-foot features scale fast. ARG tells buyers to plan 1 to 1.25 gpm per inch of lip, about 36 to 45 gpm for its 36 in waterfall (ePoolSupply listing), while Grand Effects lists its 36 in copper flow scupper at 25 to 30 gpm per foot of width, which is 75 to 90 gpm for one fixture (ePoolSupply listing). A rain curtain sits at the other end: 1 to 2 gpm per foot for the Grand Effects R-48-S.
Two figures on Pentair’s own sheets disagree, so ask which one a design uses. The 2023 catalog says the Deck Jet II height adjusts to a maximum of six feet, while the 2024 instruction sheet lists jet heights of 3.0, 6.6 and 10.0 at 3, 4 and 5 gpm with no unit. The ColorVision bubbler highlights say plumes up to 24 in, while its chart shows 42 in at 15 gpm through a 1/2 in nozzle in 4 in of water.
How much do pool water features cost?
Installed pool water features cost $200 to $15,000 each at national rates: Fixr’s January 2025 table lists $200 to $15,000 for a fountain, $250 to $15,000 for a waterfall, $4,000 to $8,000 for fire bowls and $5,000 to $10,000 for a grotto. A Dallas-Fort Worth pool company prices deck jets at $300 to $700 each and laminars at $800 to $1,500 or more.
| Feature | Installed cost | Scope | Source and date |
|---|---|---|---|
| Fountain | $200 to $15,000 | Pool addition, national | Fixr, updated Jan 31, 2025 |
| Waterfall | $250 to $15,000 | Pool addition, national | Fixr, updated Jan 31, 2025 |
| Grotto | $5,000 to $10,000 | Pool addition, national | Fixr, updated Jan 31, 2025 |
| Fire bowls | $4,000 to $8,000 | Pool addition, national | Fixr, updated Jan 31, 2025 |
| Spa area | $6,500 to $15,000 | Pool addition, national | Fixr, updated Jan 31, 2025 |
| Deck jets | $300 to $700 per jet; 2 to 4 jets $800 to $2,800 | Dallas-Fort Worth builder pricing | Simplified Pools, Feb 5, 2026 |
| Laminar jets | $800 to $1,500 or more per jet; 2 to 4 jets $2,000 to $6,000 or more | Dallas-Fort Worth | Simplified Pools, Feb 5, 2026 |
| Bubblers | $200 to $500 each; 2 to 6 on a sun shelf $600 to $3,000 | Dallas-Fort Worth | Simplified Pools, Feb 5, 2026 |
| Sheer descent | $800 to $2,000 (12 to 36 in); $1,500 to $3,500 (48 to 72 in) | Dallas-Fort Worth | Simplified Pools, Feb 5, 2026 |
| Raised wall for a sheer descent, if none exists | $2,000 to $8,000 or more | Dallas-Fort Worth | Simplified Pools, Feb 5, 2026 |
| Scuppers | $500 to $1,500 each installed | Dallas-Fort Worth | Simplified Pools, Feb 5, 2026 |
| Rock waterfall | $1,500 to $4,000 small; $4,000 to $10,000 medium; $10,000 to $30,000 or more with a grotto | Dallas-Fort Worth | Simplified Pools, Feb 5, 2026 |
| Plumbing stub-outs during construction | $200 to $500 per feature | Dallas-Fort Worth | Simplified Pools, Feb 5, 2026 |
Sources: Fixr pool remodeling cost guide, updated January 31, 2025; Simplified Pools, Pool Water Features and Fountains, February 5, 2026. Download CSV
Hardware is a small share of most installed prices. On November 2, 2026, ePoolSupply listed a Jandy 3 ft Sheer Descent at $228.95, an ARG 36 in waterfall at $315.95, a Pentair MagicStream Laminar at $999.95, a Grand Effects 48 in stainless rain curtain at $3,899.95 and a Pentair MagicFlame 32 in fire and water bowl at $4,000.95. Plumbing, any raised wall, and gas and electrical work make up the rest.
Pool water features for inground pools are cheapest to plumb while the pool is built. Simplified Pools prices plumbing stub-outs at $200 to $500 per feature during construction, and $2,000 to $8,000 or more for a raised wall if a sheer descent has nothing to mount on. On an existing pool, deck jets and laminars mean cutting the deck to run pipe; Pentair specifies 1 in Schedule 40 PVC to each laminar.
What size pump do pool water features need?
Add the flow of every feature that runs at once, find the highest head any one of them needs, then pick a pump whose curve delivers that flow at that head plus pipe losses. Two Pentair laminars (20 gpm at 16 ft of head) and a 36 in sheet waterfall (36 to 45 gpm) need 56 to 65 gpm, close to ENERGY STAR’s 62.9 gpm median test point.
- List each feature's flowTake gpm from the maker sheet, not a rule of thumb: 3 to 5 gpm per Pentair deck jet, 10 gpm per Pentair laminar, 1 to 1.25 gpm per inch for an ARG sheet waterfall.
- Add the features that run togetherTwo laminars plus a 36 in waterfall is 20 + 36 to 45 = 56 to 65 gpm. Features on separate valves that never run at once do not add.
- Find the highest headThe laminar needs 16 ft of head measured at the laminar; the deck jet needs up to 11.0 ft at 5 gpm. Size to the most demanding branch.
- Add pipe and fitting lossesPentair tells installers to calculate pressure drop on long runs and raise supply pressure to match; ask the builder for the friction figure on the actual pipe runs.
- Match a pump curveCompare the total with a pump curve. ENERGY STAR’s median certified variable speed pump tests at 62.9 gpm and 762.6 W on DOE curve C, where head is 0.0167 x flow squared, about 66.1 ft at that flow.
- Valve every featurePentair asks for a 3/4 in ball valve on each deck jet and a 3-way valve near the pump for the group, so each feature can be trimmed.
- Filter the laminar supplyPentair specifies a 20 micron cartridge filter for laminar water and says not to use a sand or DE filter, because debris breaks the smooth stream.
- Check the suction coversDrain covers display their rated gpm (CPSC VGB Act letter, April 18, 2023). Ask the builder to show that the covers a feature pump draws through are rated above that pump’s maximum flow.
| Step | Input | Arithmetic | Result |
|---|---|---|---|
| 1. Laminar jets | 2 jets at 10 gpm, 16 ft of head at each (Pentair) | 2 x 10 | 20 gpm |
| 2. Sheet waterfall, 36 in | 1 to 1.25 gpm per inch (ARG listing) | 36 x 1 to 36 x 1.25 | 36 to 45 gpm |
| 3. Feature flow, all running | Steps 1 and 2 | 20 + 36 to 20 + 45 | 56 to 65 gpm |
| 4. Head to plan for | Highest branch: 16 ft at the laminar, plus pipe and fitting loss | Builder calculates friction for the actual runs | 16 ft plus losses |
| 5. Pump test point to compare | ENERGY STAR median high-flow point | 62.9 gpm at 762.6 W on DOE curve C | Near the 56 to 65 gpm load |
| 6. Head at that test point | DOE curve C: head = 0.0167 x flow squared | 0.0167 x 62.9 x 62.9 | 66.1 ft |
| 7. Electricity, 4 h a day | 762.6 W; 18.16 cents per kWh (EIA, Aug 2026) | 0.7626 x 4 x 365 = 1,113 kWh; x $0.1816 | $202.19 a year |
Sources: Pentair P/N 590033 Rev D; ARG WF3606ACL listing; ENERGY STAR Certified Pool Pumps dataset; DOE curve C as used by California Energy Code Ace; EIA Table 5.6.A, August 2026; PC&S arithmetic. Download CSV

Variable speed pumps make features cheaper to run, because a feature can be scheduled at high speed while filtration runs slow. DOE’s pump standard model assumes variable speed pumps spend up to 2 hours a day at high speed for cleaners and water features (82 FR 5650, 2017). The filtration side of that schedule is in our guide on how long to run a pool pump. Pump types and their savings are compared in the variable speed pool pump guide.
Do pool water features speed up evaporation?
Yes. EPA WaterSense says the higher a feature’s flow, the more water it loses to evaporation, and that falling water loses less than spray. Splashing raises the activity factor used to size indoor pool dehumidifiers from 0.5 for a recreational pool to 1.0 for a spa. If features doubled evaporation while running 4 hours a day, a Phoenix 15 x 30 ft pool would lose about 3,498 more gallons a year.
| City | Uncovered 15 x 30 ft pool, gallons a year | Extra gallons, features 2 h a day | Extra gallons, 4 h a day | Extra gallons, 8 h a day | Water cost of the 4 h extra | Effective top-up rate per 1,000 gal (rates effective) |
|---|---|---|---|---|---|---|
| Las Vegas, NV | 23,444 | 1,954 | 3,907 | 7,815 | $16.68 | $4.27 (2026-01-01) |
| Phoenix, AZ | 20,988 | 1,749 | 3,498 | 6,996 | $29.87 | $8.54 (2025-03-01) |
| Dallas, TX | 15,074 | 1,256 | 2,512 | 5,025 | $14.50 | $5.77 (2026-10-01) |
| Miami, FL | 14,716 | 1,226 | 2,453 | 4,905 | $42.63 | $17.38 (2026-10-01) |
| Houston, TX | 13,297 | 1,108 | 2,216 | 4,432 | $61.48 | $27.74 (2026-04-01) |
| Nashville, TN | 10,485 | 874 | 1,748 | 3,495 | $35.61 | $20.38 (2026-01-01) |
Sources: PC&S pool evaporation study (NOAA TR 34 pan data x 0.70; utility rates in effect October 2026); activity factors from the EnergyPlus Engineering Reference; PC&S arithmetic. A scenario, not a measurement. Download CSV
A scenario, not a measurement: the activity factor comes from indoor pool design practice.
Source: PC&S evaporation model (NOAA TR 34 pan data x 0.70); activity factors from the EnergyPlus Engineering Reference; PC&S arithmetic. Download chart data (CSV)
The scenario is ours. Base evaporation for an uncovered 15 x 30 ft pool comes from the PC&S evaporation study, which multiplies NOAA Class A pan data by 0.70. The activity factors come from the ASHRAE method documented in the EnergyPlus Engineering Reference: 0.5 for a recreational pool, 1.0 for a whirlpool or spa and 1.5 to 2.0 for wave pools and water slides. We doubled evaporation only for the hours features run; wind, sun and spray can push the real outdoor figure either way.
A cover outweighs any feature schedule. EPA estimates an uncovered 500 sq ft pool loses 12,000 to 31,000 gallons a year and that solid covers cut evaporation by more than 90% when in use (EPA WaterSense pool guide). The same agency’s tech sheet adds that placing a feature in shade reduces evaporation further and that lower pumping rates waste less water (EPA tech sheet).
| Item | Value | Arithmetic or source |
|---|---|---|
| Heat to evaporate 1 lb of water at 80 F | 1,048.7 Btu | 1,096.8 (vapor) minus 48.1 (liquid) Btu per lb, NIST Chemistry WebBook |
| Weight of 1 gallon of water | 8.34 lb | USGS Water Science School |
| Heat per gallon evaporated | 8,746 Btu | 1,048.7 x 8.34 |
| Heat per 1,000 gallons evaporated | 8.75 million Btu | x 1,000 |
| Replacing it with a heat pump (COP 5.0) | $93.85 | $10.73 per million Btu delivered, US, July 2026 (PC&S cost-to-heat study) |
| Replacing it with a gas heater (82% efficient) | $272.36 | $31.14 per million Btu delivered, US, July 2026 (PC&S cost-to-heat study) |
Sources: NIST Chemistry WebBook, saturation properties of water at 80 F; USGS Water Science School; PC&S cost-to-heat study (EIA July 2026 prices; DOE COP 5.0 and 82% gas efficiency). Download CSV
In a heated pool the heat bill outruns the water bill. Each gallon that evaporates at 80 F carries 8,746 Btu, so the 3,498 extra gallons in the Phoenix scenario hold 30.6 million Btu, worth $328 of heat pump heat or $953 of gas at July 2026 prices if the heater runs all year. Most pools heat for part of the year, so scale by your heating months.
What does it cost to run a pool water feature?
Mostly pump electricity. ENERGY STAR’s median certified variable speed pump draws 762.6 W at 62.9 gpm and 1,533 W at full speed (80.5 gpm). At the August 2026 US average of 18.16 cents per kWh, that is $101.10 to $404.39 a year for 2 to 8 hours a day at the lower point, and about double at full speed.
| Feature run time | Pump at 762.6 W (62.9 gpm point) | Pump at 1,533 W (80.5 gpm, full speed) |
|---|---|---|
| 2 h a day | 557 kWh; $101.10 | 1,119 kWh; $203.23 |
| 4 h a day | 1,113 kWh; $202.19 | 2,238 kWh; $406.45 |
| 8 h a day | 2,227 kWh; $404.39 | 4,476 kWh; $812.91 |
Sources: ENERGY STAR Certified Pool Pumps dataset (medians); EIA Electric Power Monthly Table 5.6.A, August 2026; PC&S arithmetic (W x hours x 365 / 1,000 x $0.1816). Download CSV
A fire and water bowl adds gas. Pentair’s MagicFlame bowl carries an 85,000 Btu burner (ePoolSupply listing). At EIA’s July 2026 US residential price of $26.45 per thousand cubic feet and 1,036 Btu per cubic foot, an hour at full fire costs about $2.17, or $1.26 at the 2025 annual average of $15.34 (EIA monthly; EIA annual; EIA Btu factors).
For comparison, the infinity edge pump on a vanishing edge pool is the same kind of load at a larger scale, and our infinity pool cost guide prices it by hours a day. The largest moving-water load in a backyard is a current pump for a river, sized at 1,224 to 2,215 gpm of jet flow for a 150 ft loop in our lazy river pool guide.
Do water features change pool chemistry?
Yes, they raise pH. Splashing drives carbon dioxide out of the water, which lifts pH without changing total alkalinity: the CDC’s 2024 MAHC Annex calls alkalinity a source of rising pH through outgassing, and Robert Lowry’s AQUA Magazine method uses waterfalls and jets for exactly that. Expect more acid demand when features run every day.
- pH drift up: Lowry estimates aeration lifts pH from 6.5 to 7.0 in about 4 to 8 hours, takes a day or more from 7.0 to 7.5, and rarely pushes it much past 7.5 on its own (AQUA Magazine, September 6, 2016; MAHC Annex, 2024).
- Lowering alkalinity: run features after each acid dose, because aeration brings pH back up while alkalinity stays down.
- Lowering pH: switch features off while you dose and retest, so they are not pushing pH back up.
- Saltwater pools: Hayward runs its AquaRite 900 at 2,700 to 3,400 ppm salt (Hayward manual). Grand Effects lists its stainless rain curtain as not for saltwater, and Pentair certifies its listed underwater lights for up to 6,000 ppm.
- Clean supply water: Pentair specifies a 20 micron cartridge filter for laminar water; sand and DE filters are ruled out.
The acid doses themselves are in our guide on how to lower pH in a pool, which lists the Florida DOH table and the step of switching off waterfalls and jets while you correct.
How loud are pool water features?
Fall height matters most. A 2012 Heriot-Watt University doctoral thesis on water feature acoustics found sound levels rose 5 to 10 dB as falling height increased, 2 to 3 dB when the same flow was split into several streams, and 2 to 3 dB as a waterfall widened at high flow. Listeners preferred stream sounds to fountains, and fountains to waterfalls.
- To mask road noise, the thesis found water sound should match the traffic level or sit no more than 3 dB below it (Al-Musawi, Heriot-Watt University, 2012).
- A short sheer descent drops less height than a tall rock waterfall, so at the same flow it starts quieter by the thesis findings.
- Pentair advises setting laminars close to the pool edge so wind does not splash their arcs onto the deck.
- EPA lists noise reduction among the beneficial uses a recirculating water feature can serve (EPA tech sheet).

Which pool water features suit small pools?
Small pool water features are the low-flow ones: deck jets at 3 to 5 gpm, a laminar at 10 gpm, a 12 in scupper at 15 to 20 gpm or a rain curtain at 1 to 2 gpm per foot. A 36 in sheet waterfall at 36 to 45 gpm already matches the 36 gpm filtration flow cap California’s 2025 Energy Code allows a small pool.
| If your situation is | Do this | Why (source) |
|---|---|---|
| Cocktail, plunge or other small pool | Choose deck jets or one laminar | 3 to 5 gpm per deck jet and 10 gpm per laminar (Pentair sheets) |
| Sun shelf or beach entry 2 to 10 in deep | Add bubblers, and plan 15 to 45 gpm each | Pentair ColorVision is designed for 2 to 10 in of water |
| No raised wall yet | Price the wall before the waterfall | A raised wall adds $2,000 to $8,000 or more (Simplified Pools, 2026) |
| Combined feature flow above about 60 gpm | Ask for a dedicated feature pump and a pump curve at the design head | ENERGY STAR median VS pump tests 62.9 gpm at 762.6 W |
| Desert city with high evaporation (Las Vegas, Phoenix) | Pick falling features over spray, and run them on a timer | EPA WaterSense: falling water and shade cut evaporation |
| Heated pool | Run features only when people are out there | Each 1,000 gallons evaporated takes 8.75 million Btu ($93.85 heat pump, $272.36 gas) |
| Saltwater pool | Check each maker's saltwater statement before buying metal fixtures | Grand Effects lists its stainless rain curtain as not for saltwater |
| Lowering total alkalinity | Run the features after each acid dose | Aeration raises pH without raising alkalinity (Lowry, AQUA, 2016) |
| Lowering pH | Switch features off until pH settles | Aeration pushes pH back up |
| Pool is still in design | Rough in plumbing for features you may add later | Stub-outs cost $200 to $500 per feature during construction (Simplified Pools) |
Sources: Pentair; Pentair catalog; Simplified Pools; ENERGY STAR; EPA WaterSense; NIST; ePoolSupply; AQUA Magazine. Download CSV

On a cocktail pool, one or two low-flow features can share a modest pump; our cocktail pool guide gives the sizes and running costs. A raised spa that spills into the pool is a water feature too, priced at $6,500 to $15,000 by Fixr, with build steps in our spa construction guide. Laminars and bubblers with LEDs sync to pool lights, compared in the pool lighting guide.
How we compiled this
We read 3 Pentair documents (the 2023 water features catalog and two installation sheets), 9 product listings at ePoolSupply captured November 2, 2026, 2 cost sources (Fixr and Simplified Pools), EPA’s WaterSense tech sheet and pool guide, the EnergyPlus Engineering Reference, NIST and USGS water data, EIA price tables, the ENERGY STAR pump dataset, the CDC MAHC Annex, an AQUA Magazine article and a Heriot-Watt thesis record. Evaporation, heat and running-cost figures are PC&S arithmetic from those inputs; nothing was measured or tested, and we used forum posts only for question wording.
Frequently Asked Questions
Do pool water features speed up evaporation?
Yes. EPA WaterSense says higher flow means more water lost to evaporation and that falling water loses less than spray. In our scenario, features that double evaporation for 4 hours a day add about 3,498 gallons a year to an uncovered 15 x 30 ft pool in Phoenix and 1,748 in Nashville. A cover, which EPA says can stop up to 95% of evaporation, saves far more.
How much does it cost to add a water feature to a pool?
Fixr’s January 2025 table lists $200 to $15,000 installed for a fountain, $250 to $15,000 for a waterfall, $4,000 to $8,000 for fire bowls and $5,000 to $10,000 for a grotto. Simplified Pools, a Dallas-Fort Worth company, prices deck jets at $300 to $700 each, laminars at $800 to $1,500 or more and bubblers at $200 to $500 (February 2026).
Can you add water features to an existing pool?
Usually, but it costs more than building them in. Deck jets and laminars need the deck cut to run pipe, Pentair specifies 1 in Schedule 40 PVC to each laminar, and a sheer descent needs a wall; Simplified Pools prices a raised wall at $2,000 to $8,000 or more, against $200 to $500 per feature for plumbing stub-outs during construction (February 2026).
What size pump do I need for a pool waterfall?
Size it to the sheet. ARG plans 1 to 1.25 gpm per inch of lip, so a 36 in waterfall needs 36 to 45 gpm, and the trade rule for a 1 in sheet over a square edge is about 36 gpm per foot. Add any other features that run at the same time, then match a pump curve at the highest head plus pipe losses.
Do waterfalls raise pool pH?
Yes. Falling and splashing water drives carbon dioxide out, which raises pH without changing total alkalinity; the CDC’s 2024 MAHC Annex calls alkalinity a source of rising pH through outgassing. Robert Lowry’s AQUA Magazine method uses waterfalls and jets to lift pH after acid doses, and estimates pH climbs from 6.5 to 7.0 in about 4 to 8 hours.
Who makes the best pool water features?
No independent ranking exists, so compare documents instead. Pentair publishes flow and head for its laminar (10 gpm at 16 ft) and Deck Jet II (3 to 5 gpm), ARG and Grand Effects listings state gpm per inch or per foot, and Jandy sells the Sheer Descent line. Pick the maker whose sheet states flow, head, materials and saltwater limits for your pool.
Sources
- Pentair. MagicStream Laminar Installation and User's Guide, P/N 590033 Rev D (2013), copy hosted by Inyo Pools. Accessed 2026-11-02.
- Pentair. MagicStream Deck Jet II Installation Instructions, P/N 590043 Rev E (2024). Accessed 2026-11-02.
- Pentair. 2023 Product Catalog: Water Features. Accessed 2026-11-02.
- Pool & Spa Marketing. Water feature hydraulics (trade article). Accessed 2026-11-02.
- ePoolSupply. Product listings: Deck Jet II 4-pack, MagicStream Laminar 580001T, ARG WF3606ACL, Jandy Sheer Descent 1103003, Grand Effects R-48-S, US-12, SFC-36-6, WBSLCORMET24L, Pentair MagicFlame 580189. Accessed 2026-11-02.
- Fixr. Pool Remodel Cost (pool additions table), updated January 31, 2025. Accessed 2026-11-02.
- Simplified Pools. Pool Water Features and Fountains: Enhance Your DFW Backyard Oasis, February 5, 2026. Accessed 2026-11-02.
- U.S. Environmental Protection Agency. Pools and Outdoor Water Features, WaterSense Technical Reference Manual tech sheet EPA-832-F-23-016 (July 2023). Accessed 2026-11-02.
- U.S. Environmental Protection Agency. Jump Into Pool Water Efficiency: outdoor pool guide. Accessed 2026-11-02.
- EnergyPlus (U.S. DOE), Big Ladder Software copy. Engineering Reference: Indoor Swimming Pool (activity factors). Accessed 2026-11-02.
- NIST Chemistry WebBook. Thermophysical Properties of Fluid Systems: water, saturation properties. Accessed 2026-11-02.
- U.S. Geological Survey. Water Density. Accessed 2026-11-02.
- U.S. EPA ENERGY STAR. ENERGY STAR Certified Pool Pumps dataset. Accessed 2026-11-02.
- U.S. Department of Energy. Energy Conservation Standards for Dedicated-Purpose Pool Pumps, 82 FR 5650. Accessed 2026-11-02.
- California Energy Code Ace. Pool and Spa fact sheet (2025 Energy Code). Accessed 2026-11-02.
- U.S. Energy Information Administration. Electric Power Monthly Table 5.6.A, August 2026. Accessed 2026-11-02.
- U.S. Energy Information Administration. Natural Gas Prices, residential, monthly and annual. Accessed 2026-11-02.
- U.S. Energy Information Administration. Energy Explained: British thermal units. Accessed 2026-11-02.
- AQUA Magazine. Using Air and Acid to Quickly Get Perfect pH/Alkalinity (Robert W. Lowry, September 6, 2016). Accessed 2026-11-02.
- Centers for Disease Control and Prevention. 2024 Model Aquatic Health Code Annex, 5th edition. Accessed 2026-11-02.
- Hayward. AquaRite 900 manual, Rev D. Accessed 2026-11-02.
- Heriot-Watt University. Acoustical design of water features and their use for road traffic noise masking (thesis record, 2012). Accessed 2026-11-02.
- U.S. Consumer Product Safety Commission. FY23 VGBA Drain Cover Compliance Reminder Letter (April 18, 2023). Accessed 2026-11-02.
- Pool Construction & Service research. Pool Evaporation Rate by City. Accessed 2026-11-02.
- Pool Construction & Service research. Cost to Heat a Pool. Accessed 2026-11-02.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.