
Cloudy Hot Tub Water: Find the Cause From Your Test, Then Clear It
Cloudy hot tub water usually means low sanitizer, high pH, alkalinity or calcium, or a dirty filter: test first, hold chlorine at 3 ppm or more (CDC), clean the filter, shock, and drain if it stays cloudy.
- ✓Cause by test readingEleven readings and signs mapped to a cause, a first fix and the source.
- ✓Shock math for 400 gallons0.8 oz of 55% dichlor adds about 8.2 ppm, from the Spa 56 label rate.
- ✓Health limitsCDC: at least 3 ppm chlorine; 18 U.S. hot tub outbreaks involved Pseudomonas, 2009 to 2023.
Key takeaways
- CDC sets hot tub targets of at least 3 ppm chlorine or 4 to 8 ppm bromine and pH 7.0 to 7.8; the 2024 Model Aquatic Health Code treats a spa bottom that is not visible, or pH above 8.0, as an imminent health hazard (6.6.3.1).
- High pH or alkalinity is the cloudy-water cause named most often, in 8 of 9 makers’ manuals such as the Bullfrog 2018 manual (pH above 7.6), ahead of dirty filters, old water and high calcium at 6 each.
- Shock math for 400 gallons: the Leisure Time Spa 56 rate of 1 oz per 500 gallons is 0.8 oz of 55% dichlor, about 8.2 ppm; the EPA Reg. No. 5185-441 label gives 4 teaspoons and bars entry above 5 ppm.
- Warm water holds less calcium: the 2024 MAHC Annex sets 100 to 200 ppm for water above 90 F, and the Florida DOH manual says spas cloud at lower calcium levels than pools.
- Hot tubs were the setting for 176 of 560 U.S. treated recreational water outbreaks from 2009 to 2023, 18 involving Pseudomonas, the cause of hot tub rash, in CDC NORS data tallied in our outbreak registry.
- Two popular guides, Swim University and Poolonomics, list 1 to 3 ppm chlorine for hot tubs, below the 3 ppm minimum that CDC and the MAHC set.
Why is my hot tub water cloudy?
Cloudy hot tub water has five common causes in 9 makers’ manuals: pH or alkalinity too high (8 manuals), a dirty filter (6), old water loaded with dissolved solids (6), high calcium hardness (6) and low sanitizer against a heavy organic load (5). Hot water makes two of them worse, because calcium is less soluble as water warms and jets strip chlorine faster. If the haze has a green tint, test for metals as well as sanitizer: our guide to green hot tub water separates algae from copper and iron.
| Cause | Manuals that list it (of 9) | Makers | What the manuals say |
|---|---|---|---|
| pH or total alkalinity too high | 8 | Bullfrog, Caldera, Catalina, Coast, Hot Spring, Hydropool, Master Spas, Nordic | Bullfrog: pH above 7.6 can cause cloudy water; Caldera and Hot Spring: above 7.8 |
| Dirty filter or poor filtration | 6 | Caldera, Catalina, Coast, Hydropool, Master Spas, Nordic | Hydropool lists hazy gray water as a sign the cartridge needs cleaning |
| Old water or excess dissolved solids | 6 | Caldera, Catalina, Coast, Hydropool, Master Spas, Nordic | Catalina: end of water life, drain and refill and replace the filter |
| High calcium hardness | 6 | Bullfrog, Caldera, Coast, Hot Spring, Hydropool, Master Spas | Caldera: high levels of calcium can cause cloudy water and scaling |
| Low sanitizer or a heavy organic load | 5 | Bullfrog, Caldera, Catalina, Master Spas, Nordic | Bullfrog: perspiration and other liquid waste need a super sanitize |
| A product that clouds the water | 4 | Caldera, Hot Spring, Master Spas, Nordic | Caldera and Hot Spring: clarifiers cloud water on their silver systems; Master Spas: defoamer overuse |
| Particles too small for the filter | 3 | Bullfrog, Caldera, Hydropool | Hydropool: a flocculent combines particles so the filter can trap them |
| Bacteria in the plumbing or on the cover | 2 | Catalina, Master Spas | Master Spas: if sanitizer is already adjusted, perform a system flush |
Sources: Bullfrog 2018; Caldera 2025; Catalina 2022; Coast 2026; Hot Spring 2026; Hydropool 2024; Master Spas Getaway 2025 and Master Spas water care guide; Nordic 2023; Sundance 2025. Read in saved copies October 26, 2026 and re-checked November 1, 2026. PC&S count. Download CSV
Heat is the hot tub’s handicap. The Florida DOH operator manual notes that calcium is less soluble in warm water, so cloudiness appears at lower calcium levels in spas than in pools, and CDC’s home water page lists hot tub jets that create droplets among the things that pull chlorine down. The same chemistry at pool scale is covered in our guide to cloudy pool water.
Bathers supply the organic load. Of 3,100 U.S. adults polled in 2019, 48% said they do not shower before swimming, per our pool hygiene statistics drawn from the Sachs Media topline. Sweat, lotion and soap that sanitizer cannot keep up with show up first as haze and, in many tubs, as foam; our guide to hot tub foam ranks those causes separately.
What does your test reading say is causing the cloudiness?
Read the numbers in order: sanitizer, combined chlorine, pH and alkalinity, then calcium. The first reading out of range is usually the cause, and fixing it in that order saves chemicals. When every reading is in range and the water stays hazy, the filter, biofilm in the lines or spent water is to blame, and those take a cleaning or a drain rather than another dose.
| Test reading or sign | Likely cause | What to do first | Source |
|---|---|---|---|
| Free chlorine under 3 ppm or bromine under 4 ppm | Sanitizer used up by sweat, oils and bacteria | Shock to the label dose, then hold the CDC minimum | CDC; MAHC 2024 5.7.3.1; Bullfrog 2018; Nordic |
| Free chlorine more than 0.4 ppm below total chlorine | Combined chlorine (chloramines) | Superchlorinate or add non-chlorine shock | MAHC 2024 5.7.4.4.2; Master Spas Getaway 2025 |
| Combined chlorine reads high just after a non-chlorine shock | Leftover monopersulfate reading as combined chlorine on a DPD test | Retest the next morning or use a kit with a neutralizer | PHTA Tech Notes, 2019 |
| pH above 7.8 | Scale-forming water and weaker chlorine | Lower pH to 7.2 to 7.8 | CDC; Caldera 2025; Hot Spring 2026; Catalina 2022 |
| Total alkalinity above 120 ppm | Carbonate in excess | Lower alkalinity first, then pH | Bullfrog 2018; Coast 2026; Hydropool 2024; Nordic |
| Calcium hardness above your manual's range | Calcium dropping out of hot water | Partial drain with softer fill water; stain and scale inhibitor | MAHC 2024 Annex; Florida DOH; Catalina 2022 |
| All readings in range, filter last cleaned more than 4 weeks ago | Loaded cartridge | Clean or replace the filter | Caldera 2025 (monthly); Catalina 2022 (2 to 4 weeks) |
| Gray, dull water | Dissolved solids built up | Drain and refill | Hydropool 2024 |
| Milky water after a defoamer | Defoamer overuse | Stop the defoamer; clean the filter; drain if it stays | Master Spas Getaway 2025 |
| Readings in range, still cloudy after a shock | Biofilm in the lines or spent water | Line flush, drain and refill | Nordic; Master Spas guide |
| Bottom not visible with the jets off and bubbles gone | Fails the MAHC clarity rule | Do not soak until it clears | MAHC 2024 5.7.6 and 6.6.3.1 |
Sources: CDC; MAHC 2024; MAHC 2024 Annex; Florida DOH; PHTA Tech Notes on monopersulfate (2019); Bullfrog 2018; Caldera 2025; Catalina 2022; Coast 2026; Hot Spring 2026; Hydropool 2024; Master Spas Getaway 2025 and Master Spas water care guide; Nordic 2023; Sundance 2025. Download CSV

Test free and total chlorine separately; the gap is combined chlorine. A DPD liquid kit reads more accurately than strips, CDC says, and it can bleach out and read falsely low above 10 ppm. Our guide to free chlorine vs total chlorine explains the subtraction. One trap from the PHTA technical note: leftover monopersulfate shock reads as combined chlorine on DPD tests, so test before adding it.
What water limits do CDC and the MAHC set for a hot tub?
CDC asks for at least 3 ppm chlorine or 4 to 8 ppm bromine, pH 7.0 to 7.8 and water no hotter than 104 F. The 2024 MAHC adds the public spa rules behind cloudiness: act when combined chlorine passes 0.4 ppm, keep alkalinity at 60 to 180 ppm, and keep the bottom visible with the water still. A hidden bottom is an imminent health hazard under section 6.6.3.1.
| Reading | 2024 MAHC rule for public spas | Section | CDC advice for hot tubs |
|---|---|---|---|
| Free chlorine | At least 3.0 ppm; above 10 ppm with bathers is an imminent health hazard | 5.7.3.1.1.2.3; 6.6.3.1 | At least 3 ppm; above 10 ppm ask the operator |
| Bromine | 4.00 ppm minimum, 8.0 ppm maximum | 5.7.3.1.2.2; 5.7.3.1.2.3 | 4 to 8 ppm |
| pH | 7.0 to 7.8; below 6.5 or above 8.0 is an imminent health hazard | 5.7.3.4.1; 6.6.3.1 | 7.0 to 7.8 |
| Combined chlorine | Take action above 0.4 ppm | 5.7.4.4.2 | Not set |
| Total alkalinity | 60 to 180 ppm | 5.7.4.4.1 | Not set |
| Cyanuric acid | Not used in new or substantially altered spas | 5.7.3.1.3.1 | Do not use in hot tubs |
| Calcium hardness | 2,500 ppm maximum; Annex: 100 to 200 ppm when water is above 90 F | 5.7.4.4.3 | Not set |
| Water clarity | Bottom visible with the water still and bubbles gone; not visible is an imminent health hazard | 5.7.6; 6.6.3.1 | Not set |
| Total dissolved solids | Test quarterly; Annex accepts 1,500 ppm above the fill water | 5.7.5.9 | Not set |
| Temperature | 104 F maximum | 5.7.4.7.2 | No higher than 104 F |
Sources: 2024 MAHC Code (sections listed); 2024 MAHC Annex; CDC, What You Can Do to Stay Healthy in Hot Tubs (May 20, 2025); CDC home water page. Download CSV

Lowest end of each published range. Sundance allows 1.0 ppm only with its ClearRay system running.
Source: CDC (May 2025); 2024 MAHC 5.7.3.1.1.2.3; maker manuals 2018 to 2026; Leisure Time; Swim University; Poolonomics. Accessed Oct and Nov 2026. Download chart data (CSV)
| Source | Lowest free chlorine it accepts in a hot tub (ppm) | Published range | Type |
|---|---|---|---|
| CDC hot tub guidance | 3 | At least 3 | Health agency |
| 2024 MAHC, public spas | 3 | 3.0 minimum | Model code |
| Bullfrog 2018 | 3 | 3.0 to 5.0 | Maker manual |
| Catalina 2022 | 3 | 3.0 to 4.0 | Maker manual |
| Sundance 2025, without ClearRay | 3 | 3.0 to 4.0 | Maker manual |
| Master Spas guide | 2 | 2 to 4 | Maker guide |
| Leisure Time Spa 56 page | 2 | 2 to 3 | Chemical brand |
| Caldera 2025 | 1 | 1.0 to 5.0 | Maker manual |
| Coast 2026 | 1 | 1.0 to 3.0 | Maker manual |
| Hydropool 2024 | 1 | 1.0 minimum, 3.0 to 5.0 ideal | Maker manual |
| Swim University | 1 | 1 to 3 | Guide |
| Poolonomics | 1 | 1 to 3 | Guide |
Sources: CDC; MAHC 2024; Bullfrog 2018; Caldera 2025; Catalina 2022; Coast 2026; Hot Spring 2026; Hydropool 2024; Master Spas Getaway 2025 and Master Spas water care guide; Nordic 2023; Sundance 2025; Leisure Time Spa 56; Swim University; Poolonomics. Lowest end of each published range. Download CSV
Where a manual and CDC differ, use the stricter number. Caldera and Coast print chlorine ranges starting at 1.0 ppm, and Swim University and Poolonomics give 1 to 3 ppm, while CDC and the MAHC set 3 ppm; CDC notes that hot tub jets and bathers’ sweat pull chlorine down. Home tubs are not bound by the MAHC, but its numbers are the published floor.
How much shock does a cloudy 400 gallon hot tub need?
Scale the label rate to your gallons. Leisure Time’s Spa 56 dichlor label calls for 1 oz per 500 gallons to superchlorinate, so a 400 gallon tub takes 0.8 oz, which adds about 8.2 ppm at 55% available chlorine. Two EPA dichlor labels give 4 teaspoons for 400 gallons. Non-chlorine shock adds no chlorine: FROG Maintain is 3.2 oz for 400 gallons.
| Product or manual | Shock rate on the label | Arithmetic for 400 gal | Dose for 400 gal | Chlorine added | Before soaking |
|---|---|---|---|---|---|
| Leisure Time Spa 56 (dichlor, 55% available chlorine) | 1 oz per 500 gal | 400 / 500 x 1 oz; 0.8 x 28.35 g x 0.55 / 1,514 L | 0.8 oz | About 8.2 ppm | Jets 15 min with cover off |
| BioGuard Master Dichloro Dihydrate, EPA Reg. No. 5185-441 | 1 teaspoon per 100 gal | 400 / 100 x 1 tsp | 4 teaspoons | Not stated by weight | Entry prohibited above 5 ppm |
| RWP Master Dihydrate, EPA Reg. No. 67262-1 | 1 teaspoon per 100 gal | 400 / 100 x 1 tsp | 4 teaspoons | Not stated by weight | Pump 15 to 20 min; enter at 3 to 5 ppm |
| Bullfrog 2018 manual, granular chlorine | 2 teaspoons (10 ml) per 200 gal | 400 / 200 x 2 tsp | 4 teaspoons (20 ml) | Not stated | Weekly |
| Bullfrog 2018 manual, non-chlorine shock | 5 teaspoons (25 ml) per 200 gal | 400 / 200 x 5 tsp | 10 teaspoons (50 ml) | None | Weekly |
| FROG Maintain (monopersulfate) | 2 oz per 250 gal | 400 / 250 x 2 oz | 3.2 oz | None | Circulate 15 min, cover off |
Sources: Leisure Time Spa 56; EPA Reg. No. 5185-441 label; EPA Reg. No. 67262-1 label; Bullfrog 2018; FROG Maintain. 1 oz = 28.35 g; 400 gal = 1,514 L. PC&S arithmetic. Download CSV
Find your real gallons in the owner’s manual first; a dose sized for 400 gallons runs 20% light in a 500 gallon tub. Leave the cover open while the jets run: Master Spas says 15 minutes after adding chemicals and Caldera 20 minutes after a shock, so gas can vent. Pool-size doses, from 5 to 10 ppm on EPA labels, are in our guide on how to shock a pool.
How do you clear cloudy hot tub water, step by step?
Clean the filter, balance alkalinity and pH, shock to the label dose, then let the jets run and retest. Most cloudiness clears in that order. If the water is still hazy with every reading in range, flush the lines and drain. Each step below carries the manual or label number behind it.
- Look with the jets offLet bubbles settle; the MAHC clarity test for spas is done with the water still. If you cannot see the floor, nobody soaks.
- Test six readingsFree and total chlorine or bromine, pH, alkalinity, calcium hardness; CDC targets at least 3 ppm chlorine and pH 7.0 to 7.8 (CDC).
- Clean the filterHose every pleat, soak in cartridge cleaner, or swap in a spare; Catalina says clean every 2 to 4 weeks, and clean or replace it when the water turns hazy (Catalina 2022). Our guide on how to clean a hot tub filter has the full routine.
- Balance alkalinity, then pHBring alkalinity under 120 ppm and pH to 7.2 to 7.8, then wait 2 hours before retesting pH (Catalina). Doses by tub size are in our guide on how to lower pH in a hot tub.
- Shock with the cover off0.8 oz of 55% dichlor in 400 gallons (Spa 56 label), jets on 15 minutes; stay out above 5 ppm (EPA label 5185-441).
- Run the jets and retestRun the jet pump at least 10 minutes after any chemical (Caldera), then retest free and total chlorine.
- Flush and drain if still cloudyWater that stays cloudy after shocking is a clue it is time to drain (Nordic); add a line flush first, as Master Spas suggests at each drain. Our guide on how to drain a hot tub covers the drain and refill.
Could biofilm in the plumbing keep the water cloudy?
Yes, when every reading is in range and haze returns after each shock. CDC’s Legionella toolkit names sediment and biofilm among the key factors for Legionella growth in hot tubs and says to scrub every surface at each drain. Line flush products go in before draining; their claims are the makers’ own, and doses run from 3 teaspoons to a full 16 oz bottle. White or pink slime in the lines is the same biofilm problem, covered step by step in our white water mold guide.
| Product (claims are the maker's, not tested by PC&S) | Label dose | Dose for 400 gal | Run time | Claim as printed |
|---|---|---|---|---|
| SeaKlear System Flush Plus | 8 fl oz per 400 gal (4 tablespoons per 100 gal), filter out | 8 fl oz | Pump on high 1 hour, air controls closed, then drain | Cleans the plumbing system; repeat every 2 to 3 months |
| SpaPure System Cleanse | 16 fl oz bottle treats up to 750 gal | 16 fl oz | Jets high 5 min (10 for older spas), then normal running at least 8 hours | Lifts biofilm and gunk so it drains out |
| Ahh-Some gel | About 1 tablespoon (3 level teaspoons) per 300 to 350 gal | About 1 tablespoon; more for larger tubs | Jets and blower up to 30 min | Efficacy tested at Montana State University's Center for Biofilm Engineering |
| Serum Total Cleanse | 1 level teaspoon per 100 gal, 3 teaspoons maximum | 3 teaspoons | Repeat until 20 to 25 min total | Purge every 3 to 4 months, or up to 6 months with weekly product |
Sources: SeaKlear System Flush Plus; SpaPure System Cleanse; Ahh-Some instructions; Serum Total Cleanse instructions. Accessed November 1, 2026. Download CSV
We did not test these products, and none of the four pages links an independent result; Ahh-Some cites testing at a Montana State University lab and points readers to its own website for results. Expect foam during the purge, which the Ahh-Some and Serum directions both describe as normal. The Master Spas Getaway 2025 manual says biofilm builds over time and to use a removal product before draining, and the CDC Legionella toolkit sets the same days-between-drains formula as the MAHC.
How often do makers say to drain, clean the filter and check calcium?
Drain intervals run from 8 to 12 weeks for Hydropool to 180 days for Master Spas, filter cleaning from weekly sprays to every 6 weeks, and calcium hardness from 75 to 150 ppm for Caldera and Hot Spring to 200 to 400 ppm for Hydropool. Calcium above your own maker’s ceiling is a cloudiness risk; below its floor, makers warn of corrosion.
| Maker and document | Drain interval | Filter cleaning | Recommended calcium hardness (ppm) | Cloudy-water causes the manual lists |
|---|---|---|---|---|
| Bullfrog Spas, owner's manual 2018 | Every 1 to 4 months | Every 3 to 6 weeks | No number; dealer test | Perspiration (super sanitize); dust particles (clarifier); pH above 7.6; high TA; high calcium |
| Caldera Spas, Paradise Series 2025 | About 4 months, by soap input | Monthly | 75 to 150 (salt system 25 to 75) | Dirty filters, oils, improper sanitization, suspended particles, old water; pH above 7.8; high calcium |
| Catalina Spas, owner's guide 2022 | Every 4 to 6 months | Every 2 to 4 weeks | 150 to 250 | Dirty filter, organic matter, bacteria on the cover, improper sanitization, end of water life; high pH |
| Coast Spas, Purfikt Series 2026 | Every 3 to 6 months | Rinse weekly, cleaner monthly | 150 to 250 | Poor filtration; pH, hardness or alkalinity too high; soap film in old water |
| Hot Spring, Highlife Collection 2026 | Every 3 to 4 months (up to 12 with salt system) | Monthly | 75 to 150 (salt system 50) | pH above 7.8; high calcium; clarifiers on the silver system |
| Hydropool, Serenity 2024 | Every 8 to 12 weeks | Every 2 to 4 weeks; spray weekly, soak monthly | 200 to 400 ideal (150 minimum) | Particles too small to filter; high TA, pH or calcium; gray, dull water from dissolved solids |
| Master Spas, Getaway 2025 | At least every 180 days | At least monthly | 180 to 250 | Dirty filters, unbalanced chemistry, old water; low sanitizer; defoamer overuse |
| Nordic Hot Tubs, owner's manual 2023 | About every 3 months | Spray weekly, soak monthly | 100 to 150 ideal | pH and TA off, dirty filter, incompatible chemicals, low chlorine, oils; cloudy after shock means drain |
| Sundance Spas, 780 Series 2025 | About every 3 months | Stage 1 cartridge monthly | 150 to 250 | No cloudy-water entry; change water when it loses its sparkle |
Manuals: Bullfrog 2018; Caldera 2025; Catalina 2022; Coast 2026; Hot Spring 2026; Hydropool 2024; Master Spas Getaway 2025 and Master Spas water care guide; Nordic 2023; Sundance 2025. Read in saved copies October 26, 2026 and re-checked November 1, 2026. Download CSV
Use whichever comes first, the maker’s months or the code’s math. The 2024 MAHC formula, gallons / 3 / average daily users, gives 133 days for a 400 gallon tub with 1 daily user, 67 days with 2 and 33 days with 4. Our hot tub maintenance schedule compares the routine tasks across the same makers.
Is it safe to use a cloudy hot tub?
No. A cloudy tub often means sanitizer has lost ground, and hot tubs run inside Legionella’s favored growth range, per CDC. CDC says hot tub rash usually appears a few days after soaking in a poorly maintained tub. In CDC outbreak data, hot tub outbreaks produced 33.8 hospitalizations per 100 cases from 2009 to 2023, against 3.5 for pools.
Reported outbreaks only; an outbreak can involve more than one agent.
Source: CDC National Outbreak Reporting System public file, PC&S tabulation (research/swimming-pool-illness-outbreaks). Download chart data (CSV)
Of those 176 hot tub and spa outbreaks, 147 involved Legionella, 18 Pseudomonas and 6 a chemical exposure, and none involved Cryptosporidium, by our tally of CDC NORS data. CDC describes hot tub rash as an itchy, red, bumpy rash, often worse under the swimsuit, caused by Pseudomonas aeruginosa. The 2024 MAHC Annex says the minimum level that prevents Pseudomonas outbreaks has not been set but appears to be at least 1 ppm free chlorine or 2 ppm total bromine. The CDC Legionella toolkit adds that hot tubs run inside Legionella’s favored range of 77 to 113 F.
Should you shock, rebalance, clean or drain?
Match your situation to a row. Low sanitizer and combined chlorine get a shock; high pH, alkalinity or calcium get rebalancing first, because chlorine kills germs less well as pH rises, per CDC; a loaded filter gets cleaned; and haze that survives all of that gets a line flush and a drain. A rash after soaking is a health question first.
| If your situation is | Do this | Why (source) |
|---|---|---|
| Chlorine under 3 ppm or bromine under 4 ppm | Shock, then hold the CDC minimum | CDC; MAHC 5.7.3.1 |
| Free chlorine more than 0.4 ppm below total | Superchlorinate or use non-chlorine shock | MAHC 5.7.4.4.2; Master Spas |
| pH above 7.8 or alkalinity above 120 ppm | Lower alkalinity, then pH; skip the shock until balanced | CDC; Bullfrog; Nordic |
| Calcium above your manual's range | Partial drain with softer water | MAHC Annex; Florida DOH |
| Readings fine, filter due | Clean or replace the cartridge | Catalina; Caldera |
| Readings fine, still cloudy after a shock | Flush the lines, drain and refill | Nordic; Master Spas |
| Water older than gallons / 3 / daily users days | Drain and refill | MAHC 5.12.1.2.1 |
| Bottom not visible with the jets off | Stay out until it clears | MAHC 5.7.6; 6.6.3.1 |
| Rash after soaking that worsens or recurs | See a healthcare provider; fix sanitizer before reuse | CDC hot tub rash page |
Sources: CDC; CDC hot tub rash page; MAHC 2024; MAHC Annex; Florida DOH; Bullfrog 2018; Caldera 2025; Catalina 2022; Coast 2026; Hot Spring 2026; Hydropool 2024; Master Spas Getaway 2025 and Master Spas water care guide; Nordic 2023; Sundance 2025. Download CSV
| Number | Value | Source |
|---|---|---|
| CDC hot tub targets | Chlorine at least 3 ppm, bromine 4 to 8 ppm, pH 7.0 to 7.8 | CDC, May 2025 |
| Combined chlorine action level | Above 0.4 ppm | MAHC 2024 5.7.4.4.2 |
| Calcium hardness for water above 90 F | 100 to 200 ppm | MAHC 2024 Annex |
| Shock for 400 gal (Spa 56 label) | 0.8 oz, about 8.2 ppm | Leisure Time label; PC&S arithmetic |
| Days between drains, 400 gal and 2 users | 67 days | MAHC 2024 5.12.1.2.1 |
| Hot tub or spa outbreaks, 2009 to 2023 | 176 of 560 U.S. treated-water outbreaks | CDC NORS via PC&S research |
| Hot tub outbreaks involving Pseudomonas | 18 | CDC NORS via PC&S research |
| Hospitalizations per 100 cases, hot tub outbreaks | 33.8, against 3.5 for pools | CDC NORS via PC&S research |
Sources: CDC; MAHC 2024; MAHC Annex; Leisure Time Spa 56; CDC NORS via PC&S outbreak research. Download CSV
Rather have a spa pro clear it?
How we compiled this
We read 29 documents between October 26 and November 1, 2026: nine hot tub makers’ owner’s manuals plus a Master Spas water care guide, the 2024 Model Aquatic Health Code and its Annex, four CDC pages, a Florida DOH operator manual, two EPA dichlor labels, a PHTA technical note, two shock product pages and one defoamer page, four line flush labels or instruction sheets and two competitor guides used only for comparison. Outbreak and hygiene figures come from PC&S research built on CDC NORS and survey data. We tested no products and used no forum posts.
Frequently Asked Questions
Is it safe to get in a cloudy hot tub?
No. Cloudiness often means sanitizer has fallen behind, and the 2024 MAHC treats a spa bottom that cannot be seen with the water still as an imminent health hazard. CDC says hot tub rash, from Pseudomonas, shows up a few days after a poorly kept tub. Wait until chlorine reads at least 3 ppm and the water is clear.
Why is my hot tub cloudy after shocking?
Usually the shock went into water with high pH, high calcium or a loaded filter, which shock does not fix. Rebalance and clean the filter, then retest. Nordic’s manual says water that stays cloudy after shocking is a clue it is time to drain, and Master Spas suggests a system flush once sanitizer is already in range.
Why is my hot tub cloudy after a water change?
Look at the fill water and the refill. Caldera says to use a pre-filter at every fill to catch iron, copper and manganese, Catalina does not recommend well, untreated or softened water, and Bullfrog adds a clarifier after filling for micro-particles. Then balance alkalinity, pH and calcium to your manual’s range before shocking.
Will shock clear a cloudy hot tub?
Only when the cause is low sanitizer or combined chlorine. For 400 gallons, the Spa 56 label rate works out to 0.8 oz of 55% dichlor, about 8.2 ppm. If pH is above 7.8, calcium is above your manual’s range or the filter is dirty, fix those first; Bullfrog says pH above 7.6 can itself cause cloudy water.
Does defoamer make hot tub water cloudy?
It can. The Master Spas Getaway 2025 manual says overuse of a defoamer will result in cloudy, milky water, and Caldera and Hot Spring warn that clarifiers cloud water on their silver ion systems. Use a single label dose, such as 1/2 oz of SpaPure Defoamer, and fix the soap or calcium problem behind the foam.
When should I drain a cloudy hot tub?
When it stays cloudy with every reading in range, when the water is older than your maker’s interval, or when it passes the 2024 MAHC count of gallons / 3 / daily users, 67 days for 400 gallons and 2 users. Hydropool also says gray, dull water means dissolved solids are high enough to change it.
Sources
- CDC. What You Can Do to Stay Healthy in Hot Tubs (May 20, 2025). Accessed 2026-10-26.
- CDC. Preventing Hot Tub Rash (May 30, 2025). Accessed 2026-11-01.
- CDC. Home Pool and Hot Tub Water Treatment and Testing. Accessed 2026-10-26.
- CDC. Controlling Legionella in Hot Tubs (toolkit module). Accessed 2026-10-26.
- CDC. 2024 Model Aquatic Health Code, 5th Edition, Code Language. Accessed 2026-11-01.
- CDC. 2024 Model Aquatic Health Code, 5th Edition, Annex. Accessed 2026-11-01.
- Florida Department of Health in Collier County. Swimming Pool Operators' Manual, 2016 Version. Accessed 2026-10-26.
- CDC. NORS public dataset (via PC&S outbreak registry). Accessed 2026-10-26.
- Bullfrog Spas. Owner's Manual 2018 (rev 3.1.8). Accessed 2026-10-26.
- Caldera Spas (Watkins Wellness). Paradise Series Owner's Manual 2025. Accessed 2026-10-26.
- Catalina Spas. Owner's Guide (file dated 2022-12). Accessed 2026-10-26.
- Coast Spas. 2026 Owner's Manual, Purfikt Series. Accessed 2026-10-26.
- Hot Spring Spas (Watkins Wellness). Highlife Collection Owner's Manual 2026. Accessed 2026-10-26.
- Hydropool. Serenity Spas Owner's Manual 2024. Accessed 2026-10-26.
- Master Spas. Hot Tub Maintenance Guide (water care). Accessed 2026-10-26.
- Master Spas. Getaway Spas Owner's Manual 2025. Accessed 2026-10-26.
- Nordic Hot Tubs. Owner's Manual (file dated 2023-06). Accessed 2026-10-26.
- Sundance Spas. 780 Series Owner's Manual 2025. Accessed 2026-10-26.
- U.S. EPA (PPLS). BioGuard Master Dichloro Dihydrate label, EPA Reg. No. 5185-441. Accessed 2026-10-26.
- U.S. EPA (PPLS). RWP Master Dihydrate Granular label, EPA Reg. No. 67262-1. Accessed 2026-10-26.
- Leisure Time. Spa 56 Chlorinating Granules product page. Accessed 2026-11-01.
- Leisure Time. FROG Maintain Non-Chlorine Shock product page. Accessed 2026-11-01.
- PHTA Recreational Water Quality Committee. Tech Notes: Potassium Monopersulfate, Non-Chlorine Shock (AQUA, June 2019). Accessed 2026-11-01.
- Leisure Time. SeaKlear System Flush Plus product page. Accessed 2026-11-01.
- Leisure Time. SpaPure System Cleanse product page. Accessed 2026-11-01.
- Ahh-Some (dealer copy). Ahh-Some Hot Tub Instructions (2020). Accessed 2026-11-01.
- watercareRX. Serum Total Cleanse Instructions. Accessed 2026-11-01.
- Sachs Media for the Water Quality & Health Council. Healthy Pools 2019 survey results (via PC&S hygiene research). Accessed 2026-10-08.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.