
Pool Lighting: LED vs Incandescent Specs, Replacement Cost and How to Change a Pool Light
Pool lighting is LED, incandescent or fiber optic; a 55 W Pentair LED rated equal to a 500 W lamp costs $14.58 a year at 4 hours a night, against $132.57 for the lamp.
- ✓12 named fixturesPentair, Hayward and Jandy models with maker watts, lumens, voltage, cord length and a dated price.
- ✓Code numbers, not slogans18 in lens depth, 15 V contact limit, GFCI and the 4 ft junction box rule, by NEC and IRC section.
- ✓Swap steps from the manualHow to change a pool light from Pentair's IntelliBrite 5g guide, with the pool left full.
Key takeaways
- Hayward lists its AstroLite 500 W incandescent pool light at 5,000 lumens (10 lumens per watt) and its 80 W Universal CrystaLogic LED at 4,900 lumens (61.2 lumens per watt) on its product pages, read November 1, 2026.
- At 4 hours a night and the August 2026 US average of 18.16 cents per kWh (EIA Table 5.6.A), a 500 W pool light costs $132.57 a year and a 26 W Pentair IntelliBrite 5g Color costs $6.89.
- Replacing a pool light costs $500 to $1,700 per light, fixture and labor included (HomeGuide, 2025); Angi puts the average at about $630 per unit.
- Under NEC 680.23, mirrored in 2024 IRC Section E4206, the top of the lens sits at least 18 in below normal water level and lights above the 15 V low-voltage contact limit need GFCI protection.
- CPSC knows of 33 electrocution deaths in US pools and spas from 2002 to 2018, and lists underwater lights that flicker, or are on when they should be off, as a warning sign.
What types of pool lighting are there?
Four: LED, incandescent, halogen and fiber optic. LED fixtures from Pentair, Hayward and Jandy draw 12 to 95 W at 12 V or 120 V. Incandescent fixtures, halogen included, run 100, 300 or 500 W. Fiber optic systems keep the lamp in an illuminator box at least 5 ft from the pool wall, so only fiber strands and a lens sit in the water.
| Measure | Value | Source (date) |
|---|---|---|
| Lens depth, wall-mounted underwater light | Top of lens at least 18 in below normal water level (4 in if listed for it) | 2024 IRC E4206.4.2; NEC 680.23(A)(5) |
| Junction box for a wet-niche light | At least 4 ft from the inside pool wall; 4 in above deck or 8 in above max water level | 2024 IRC E4206.9.1; NEC 680.24(A)(2) |
| Low-voltage contact limit | 15 V RMS for sinusoidal AC; 30 V for continuous DC | 2024 IRC Chapter 35 definitions; NEC 680.2 |
| GFCI | Required on branch circuits feeding lights above the low-voltage contact limit | 2024 IRC E4206.4; NEC 680.23(A)(3) |
| Light replacement, per light | $500 to $1,700 | HomeGuide (2025); Anthony & Sylvan |
| Average replacement | about $630 per unit | Angi (updated Jul 9, 2026) |
| 500 W incandescent vs 26 W LED, 4 h a night | $132.57 vs $6.89 a year | EIA Aug 2026 price; PC&S arithmetic |
| Pool and spa electrocution deaths known to CPSC | 33 (2002 to 2018) | CPSC, Don't Swim With Shocks |
Sources: 2024 IRC E4206 and Chapter 35; HomeGuide; Angi; EIA; CPSC; PC&S arithmetic. Download CSV
| Type | Watts (maker examples) | Light output (maker examples) | What sits in the pool | Price example (Nov 1, 2026) | Source |
|---|---|---|---|---|---|
| LED, white | 20 to 80 W (Hayward); 55 W for a 500 W equivalent (Pentair) | 1,100 to 4,900 lumens; 55 to 89 lm/W (Hayward) | Sealed fixture in a niche or 1.5 in fitting, 120 V or 12 V | IntelliBrite 5g White not listed; Hayward white LEDs not sold online | Pentair 2023 catalog; Hayward product pages |
| LED, color | 12 to 95 W (Jandy, Pentair, Hayward) | 950 lumens for ColorLogic 4.0 (Hayward); others not published | Sealed fixture, 120 V or 12 V | $374.95 to $1,469.00 (ePoolSupply) | Maker catalogs; ePoolSupply |
| Incandescent or halogen | 100, 300 and 500 W (Jandy); 500 W (Hayward) | 5,000 lumens at 500 W, 10 lm/W (Hayward AstroLite) | Lamp in a sealed 120 V or 12 V fixture | $509.00 fixture; $24.69 for a 500 W R40 lamp | Hayward; Jandy brochure; ePoolSupply |
| Fiber optic | Illuminator out of the water; no maker lumens found | not published | Fiber strands and a lens fitting only; lamp box at least 5 ft from the pool wall (UL) | $511.99 for a 75 strand, 50 ft kit, illuminator extra (Inyo Pools) | IAEI / UL (2009); Inyo Pools |
Sources: Pentair 2023 Pool Lighting catalog; Hayward product pages (AstroLite, Universal CrystaLogic); Jandy lighting brochure (2020); IAEI / UL Question Corner (2009); prices from ePoolSupply and Inyo Pools, November 1, 2026. Download CSV
Incandescent lamps are leaving the market. Hayward says it no longer ships 100 W or 300 W incandescent lamps with its AstroLite, DuraLite or J&J Electronics fixtures because a Department of Energy rule bars general service lamps of 3,300 lumens or less that miss 45 lumens per watt (Hayward). Its 500 W AstroLite, at 5,000 lumens, is still listed. Pentair’s catalog groups halogen with incandescent as the lights its LEDs replace.
Fiber optic is the odd one out. UL’s listing guide, quoted by IAEI, says the lamp and electrical enclosure mount at least 1.5 m (5 ft) from the pool or spa wall and only the fiber and fittings go in the water. Inyo Pools lists a Fiberstars 75 strand, 50 ft kit at $511.99 with the illuminator sold separately (Inyo Pools). Pentair markets its 3.5 in MicroBrite LED for retrofit into many pools with older fiber optic systems.
Which LED pool lights are on the market, and how bright are they?
Eleven LED and one incandescent fixture from Pentair, Hayward and Jandy cover most replacement jobs. The LEDs draw 12 to 95 W at 12 V or 120 V on 30 to 100 ft cords. Only Hayward publishes lumens: 1,100 to 4,900 for its white LEDs and 950 for the ColorLogic 4.0. ePoolSupply prices ran $374.95 to $1,469.00 on November 1, 2026.
| Maker | Model | Part number | Type | Voltage | Watts | Lumens (maker) | Incandescent equivalent (maker) | Cord | Price, ePoolSupply, Nov 1 2026 | Spec source |
|---|---|---|---|---|---|---|---|---|---|---|
| Pentair | IntelliBrite 5g Color | 601001 | Color LED | 120 V | 26 | not published | n/a | 50 ft | $824.95 | Pentair 2023 Pool Lighting catalog |
| Pentair | IntelliBrite 5g Color | 601011 | Color LED | 12 V | 26 | not published | n/a | 50 ft | $899.95 | Pentair 2023 Pool Lighting catalog |
| Pentair | IntelliBrite 5g White | 601301 | White LED | 120 V | 55 | not published | 500 W | 50 ft | not listed | Pentair 2023 Pool Lighting catalog |
| Pentair | MicroBrite Color (no niche, 1.5 in fitting) | 620424 | Color LED | 12 V | 14 | not published | n/a | 50 ft | $439.95 | Pentair 2023 Pool Lighting catalog |
| Pentair | GloBrite Color (small niche) | 602054 | Color LED | 12 V | 15 | not published | n/a | 50 ft | $374.95 | Pentair 2023 Pool Lighting catalog |
| Hayward | ColorLogic 4.0 | W3SP0527LED100 | Color LED | 120 V | 95 | 950 | not listed | 100 ft | $1,469.00 | Hayward product page |
| Hayward | Universal CrystaLogic | LPWUS11050 | White LED | 12 V | 80 | 4,900 | 500 W | 50 ft | not sold online | Hayward product page |
| Hayward | Universal CrystaLogic 2.0 | LPLUS22100 | White LED | 12 to 15 V | 37 | 3,300 | not listed | 100 ft | not listed | Hayward product page |
| Hayward | CrystaLogic 320 (1.5 in fitting) | LAWUS11030 | White LED | 12 V | 20 | 1,100 | 100 W | 30 ft | not listed | Hayward product page |
| Jandy | WaterColors Large LED | CPHVRGBWS100 | Color LED | 120 V | 50 | not published | n/a | 100 ft | $999.95 | Jandy lighting brochure (2020) |
| Jandy | Pro Series Nicheless WaterColors | JLU4C12W100 | Color LED | 12 V | 12 | not published | n/a | 100 ft | $479.95 | Jandy lighting brochure (2020) |
| Hayward | AstroLite 500 W | SP0583L50 | Incandescent | 120 V | 500 | 5,000 | n/a | 50 ft | $509.00 (100 ft, W3SP0583L100) | Hayward product page |
Sources: Pentair 2023 Pool Lighting catalog; Hayward product pages (ColorLogic 4.0, Universal CrystaLogic, Universal CrystaLogic 2.0, CrystaLogic 320, AstroLite); Jandy lighting brochure; prices from ePoolSupply listings, November 1, 2026. Download CSV
Pentair and Jandy publish watts and incandescent equivalents but no lumens for these models.
Source: Hayward product pages (accessed 2026-11-01); DOE 45 lm/W rule as quoted by Hayward. PC&S arithmetic.. Download chart data (CSV)
Pentair and Jandy rate brightness by incandescent equivalent instead of lumens. The Pentair catalog lists the IntelliBrite 5g White at 40 W, 48 W and 55 W as 300, 400 and 500 W equivalents and claims up to 86% less energy than comparable incandescent lights. Jandy says its 18 to 65 W white LEDs match 100, 300 and 500 W incandescent lights. Hayward’s ColorLogic 4.0 page lists 950 lumens at 95 W, 10 lumens per watt; treat a color fixture’s lumen figure with care.
Voltage decides the wiring. Pentair’s 120 V IntelliBrite 5g has a 12 V transformer built in, while the 12 V model needs a separate 120 V to 12 V transformer; Pentair recommends no more than 3 pool lights and 1 spa light on a 300 W transformer and no more than 100 ft of total cable run. Nicheless lights such as the MicroBrite and CrystaLogic 320 screw into a standard 1.5 in wall fitting.
How much does it cost to run a pool light?
A 500 W incandescent pool light costs $90.80 per 1,000 hours at the August 2026 US average of 18.16 cents per kWh (EIA); a 26 W Pentair IntelliBrite 5g Color costs $4.72. Run 4 hours a night all year, that is $132.57 against $6.89, and $217.17 against $11.29 at California’s August 2026 price of 29.75 cents. Switching the lights off after swimming also cuts insects: water boatmen, backswimmers and giant water bugs fly to lights at night, as our guide to water bugs in pool water shows.
Schedule is an illustration, not a measured average. 12 V fixtures add transformer losses not counted here.
Source: EIA Electric Power Monthly Table 5.6.A (Aug 2026); Pentair, Hayward and Jandy spec sheets. PC&S arithmetic.. Download chart data (CSV)
| Light | Watts | kWh per 1,000 hours | Cost per 1,000 hours, US avg | kWh per year (4 h x 365) | Cost per year, US avg 18.16 cents | Cost per year, California 29.75 cents | Cost per year, Florida 14.99 cents |
|---|---|---|---|---|---|---|---|
| 500 W incandescent (Hayward AstroLite) | 500 | 500 | $90.80 | 730.0 | $132.57 | $217.17 | $109.43 |
| Hayward ColorLogic 4.0, color LED | 95 | 95 | $17.25 | 138.7 | $25.19 | $41.26 | $20.79 |
| Hayward Universal CrystaLogic, white LED (500 W equivalent) | 80 | 80 | $14.53 | 116.8 | $21.21 | $34.75 | $17.51 |
| Pentair IntelliBrite 5g White (500 W equivalent) | 55 | 55 | $9.99 | 80.3 | $14.58 | $23.89 | $12.04 |
| Jandy WaterColors Large LED | 50 | 50 | $9.08 | 73.0 | $13.26 | $21.72 | $10.94 |
| Pentair IntelliBrite 5g Color | 26 | 26 | $4.72 | 38.0 | $6.89 | $11.29 | $5.69 |
| Jandy Nicheless WaterColors 12 W | 12 | 12 | $2.18 | 17.5 | $3.18 | $5.21 | $2.63 |
Sources: watts from Pentair, Hayward and Jandy (see fixture table); prices from EIA Electric Power Monthly Table 5.6.A, August 2026, released October 23, 2026. PC&S arithmetic: watts x hours / 1,000 x price. Download CSV
Swapping a 500 W lamp for the 26 W IntelliBrite 5g Color saves 692 kWh a year on that schedule, $125.67 at the US average, so the $824.95 fixture (120 V, 50 ft) covers its own price in about 6.6 years before labor. At 1 hour a night the savings shrink to a quarter and the payback stretches four times longer. The 4 hour schedule is our illustration, and 12 V fixtures lose some power in the transformer, which these figures leave out. Putting lights, pump and heater on one schedule, and what that hardware costs installed, is worked out in our pool automation system guide.
Lights are a small line on the pool bill. A single-speed pump running 10 hours a day costs about $121 a month at the July 2026 US price, and a variable-speed pump about $37, per our cost to run a pool pump study.
How much does pool light replacement cost?
Replacing a pool light costs $500 to $1,700 per light, fixture and labor included, according to HomeGuide’s 2025 pool repair guide and Anthony & Sylvan Pools. Angi puts the average at about $630 per unit and a repair at $65 to $150. The fixture alone runs $374.95 to $1,469.00 for the LED models priced here, and a 500 W lamp $24.69.
| Item | Cost | Source | Date |
|---|---|---|---|
| Replace light fixture and bulb, per light | $500 to $1,700 | HomeGuide, pool repair cost | 2025 |
| Replace fixture and bulb, per light (remodel) | $500 to $1,700 | Anthony & Sylvan Pools, pool remodel cost | page read 2026-10-08 |
| Average cost to replace a pool light | about $630 per unit | Angi, pool repair cost (Wayback copy) | updated Jul 9, 2026 |
| Repair instead of replace, per light | $65 to $150 | Angi | updated Jul 9, 2026 |
| Bulb only | $20 to $100 (Angi); $30 to $600 by type (HomeGuide) | Angi; HomeGuide | 2026; 2025 |
| New light installed by a pool electrician | $450 to $1,700 each | Anthony & Sylvan Pools | page read 2026-10-08 |
| Pool repair labor | $45 to $65 per hour | Angi | 2026 |
| Fixture only, LED, 50 to 100 ft cord | $374.95 to $1,469.00 | ePoolSupply listings (fixture table) | Nov 1, 2026 |
| 500 W incandescent R40 lamp (Halco 104042) | $24.69 | ePoolSupply listing | Nov 1, 2026 |
| Electrical permit, residential pool or spa incl. motor and pool lights, unincorporated Miami-Dade | $148.68 | Miami-Dade County fee schedule | current schedule |
Sources: HomeGuide pool repair cost (2025); Angi pool repair cost (updated July 9, 2026, Wayback copy); Anthony & Sylvan Pools remodel cost; ePoolSupply (November 1, 2026); Miami-Dade fee schedule. Download CSV
The fixture is most of the bill. A 120 V color LED costs $824.95 for a Pentair IntelliBrite 5g with a 50 ft cord, $999.95 for a Jandy WaterColors Large with 100 ft and $1,469.00 for a Hayward ColorLogic 4.0 with 100 ft (ePoolSupply). Labor follows the cord: Angi quotes pool repair labor at $45 to $65 an hour, and a cord that will not pull through its conduit turns a swap into an electrician’s job.
Match the niche before you buy. Pentair lists the IntelliBrite 5g as compatible with Pentair stainless steel and plastic niches, so a different brand’s niche can force a niche swap or a nicheless light. Some cities also want a permit: unincorporated Miami-Dade charges $148.68 for a residential pool or spa electrical permit that covers the motor and pool lights. Our pool repair guide prices the jobs that often ride along.
How to change a pool light, step by step
Turn the power off at the breaker, lift the fixture onto the deck and swap it there: the pool stays full. Pentair’s IntelliBrite 5g guide (P/N 619827 Rev C) lays out 12 steps, from removing the bronze pilot screw to pulling the new cord through the conduit to the deck junction box, and calls for at least 4 ft of cord coiled behind the light.
- Kill the powerSwitch off the main switch or circuit breaker and the switch that runs the light (manual step 1). Then turn the light switch on to confirm the light stays dark.
- Remove the pilot screwBack out the special bronze pilot screw at the top of the face ring and keep it: it mounts and grounds the fixture to the niche (step 2).
- Lift the fixture onto the deckPull the light out of the niche and up onto the deck on its coiled cord. Pentair says draining the pool is not necessary.
- Cut and strip the old cordOn the deck, cut the old cord leaving at least 6 in, pull it up out of the niche and strip 6 in of jacket to expose the 3 wires (steps 3 and 4).
- Tape the new cord to the oldTape each of the 3 old wires to the new light’s cord, using little tape so the bundle still slides through the conduit (step 5).
- Pull the cord at the junction boxOpen the deck junction box, which code puts at least 4 ft from the pool wall, disconnect the old wires and pull until the new cord appears (step 6).
- Connect the new lightStrip 6 in of the new cord’s jacket, connect all 3 wires to the matching circuit wires and close the box (steps 7 and 8).
- Coil 4 ft of cord and reseatCoil at least 4 ft of cord behind the fixture, seat it in the niche and drive the bronze pilot screw (steps 9 to 11).
- Restore power and testTurn the breaker and light switch back on; the light should come on. If not, start again at step 1 (step 12).

An incandescent fixture comes out the same way, but its lens gasket is the seal that keeps water off a 120 V lamp. When an IntelliBrite is opened, Pentair says to always fit a new lens gasket (P/N 79101600). The same manual warns never to replace lights by splicing wire under water or behind the niche.
What does the electrical code require for pool lights?
Article 680 of the National Electrical Code, mirrored in Section E4206 of the 2024 International Residential Code, sets four numbers for an underwater light: the top of the lens at least 18 in below normal water level, no supply over 150 V, GFCI protection above the 15 V low-voltage contact limit, and a deck junction box at least 4 ft from the inside pool wall.
| Rule | Requirement | 2024 IRC section | NEC section |
|---|---|---|---|
| Lens depth | Top of lens at least 18 in below normal water level, or 4 in if listed for that depth | E4206.4.2 | 680.23(A)(5) |
| Maximum supply voltage | No luminaire on circuits over 150 V between conductors | E4206.4.1 | 680.23(A)(4) |
| GFCI | GFCI in the branch circuit for luminaires above the low-voltage contact limit, protecting lamping, relamping and servicing | E4206.4 | 680.23(A)(3) |
| Low-voltage contact limit | 15 V RMS sinusoidal AC; 21.2 V peak nonsinusoidal AC; 30 V continuous DC; 12.4 V peak interrupted DC | Chapter 35 definition | 680.2 |
| Transformers | Listed, labeled, isolated winding (or approved double insulation) | E4206.1 | 680.23(A)(2) |
| Servicing | Wet-niche light must lift out to the deck or another dry spot without anyone entering the water | E4206.5.1 | 680.23(B)(6) |
| Forming shell | Required for every wet-niche light; light locked to it with a fastener that needs a tool | E4206.5 | 680.23(B)(1), (B)(5) |
| Deck junction box | Listed pool box, 4 ft from the inside wall, 4 in above deck or 8 in above max water level (higher governs) | E4206.9.1 | 680.24(A)(2) |
| Flush deck box | Only on systems at or below the low-voltage contact limit, potted, 4 ft from the inside wall | E4206.9.1 | 680.24(A)(2) |
Sources: 2024 IRC Section E4206 and Chapter 35 definitions via UpCodes, with the NEC section in brackets as printed in the IRC. Download CSV

Low voltage is the main lever. A 12 V light runs at or below the 15 V RMS contact limit, so it can use a potted flush deck box 4 ft from the pool, while a 120 V light needs the raised junction box and a GFCI. The NEC first required GFCI protection for underwater pool lights in 1968 (IAEI Magazine), and the light’s niche must be bonded with a No. 8 AWG conductor, part of the bonding grid in our pool bonding guide.
Older pools are not forced to upgrade until work is done: CPSC notes the NEC typically applies only to new construction or major renovations. Since the 2020 NEC, a replaced pump motor needs GFCI protection under 680.21(D), covered in our pool pump replacement cost guide, and a new light circuit usually needs a permit and inspection, as our pool permits guide explains.
Are pool lights dangerous?
Rarely, but the risk is fatal when it happens. CPSC knows of 33 electrocution deaths and 33 shock injuries in US pools and spas from 2002 to 2018. In 35 sampled NEISS emergency cases from 2015 to 2025, a pool light was the source in 2. CPSC lists underwater lights that flicker, or are on when they should be off, among the signs of current in the water.
If you feel tingling in the water, CPSC says to move away from the source and get out, avoiding a metal ladder; if someone else is being shocked, turn off all power before a rescue and call 911. Cords, plugs and outlets were the source in 10 of the 35 NEISS cases (28.6%), more than lights, and the full counts are in our pool electrocution statistics study.
Which pool light should you choose?
Pick by the niche you have, the voltage your circuit supplies and the job you want the light to do. A sound 120 V niche takes a 120 V LED; a 12 V system needs a listed transformer; an old fiber optic fitting can take a 1.5 in nicheless LED. The decision table gives the rule or number behind each case, from DOE lamp rules to GFCI trips.
| If your situation is | Do this | Rule or number behind it |
|---|---|---|
| Your 100 W or 300 W incandescent lamp burned out | Plan on an LED fixture or LED lamp, not a like-for-like lamp | Hayward no longer ships 100 W or 300 W incandescent lamps under the DOE 45 lumens per watt rule |
| The fixture is sound and the cord reaches the deck | Replace the fixture in the same niche, power off at the breaker | Pentair manual: no need to drain the pool; light must reach the deck (IRC E4206.5.1) |
| The cord cannot reach the deck or the conduit is blocked | Hire an electrician to re-pull or re-pipe before buying a fixture | Manual pulls the new cord through the conduit to the junction box |
| The breaker or GFCI trips when the light is on | Stop resetting it; have an electrician test the fixture and circuit | GFCI required for lights above 15 V (NEC 680.23(A)(3)) |
| Anyone feels tingling in the water or the light flickers on its own | Get everyone out without using a metal ladder, cut all power, call 911 | CPSC shock warning signs and response steps |
| You are switching from 120 V to 12 V lights | Add a listed transformer; Pentair caps a 300 W unit at 3 pool lights and 1 spa light | IRC E4206.1; Pentair IntelliBrite 5g guide |
| The old light is fiber optic | A 1.5 in nicheless LED can go in the fitting | Pentair: MicroBrite suits retrofit into many pools with older fiber optic systems |
Sources: Hayward; Pentair IntelliBrite 5g guide; 2024 IRC E4206; CPSC; Pentair catalog. Download CSV
If the pool is being drained for a replaster, the niche, conduit and bonding are exposed, which makes it the cheapest time to change light types or add a light; Anthony & Sylvan prices a new light at $450 to $1,700 installed. Our pool remodeling guide shows what else to bundle into that project.
How we compiled this
On November 1, 2026 we read Pentair’s 2023 lighting catalog and IntelliBrite 5g manual, five Hayward product pages, Jandy’s lighting brochure, 2024 IRC Section E4206 and its definitions, EIA’s August 2026 price table, and CPSC’s pool shock page, and took fixture prices from ePoolSupply and Inyo Pools listings that day: 17 primary documents and listings in all. Cost ranges come from HomeGuide, Angi and Anthony & Sylvan; we did not test any light, and forum posts were excluded.
Frequently Asked Questions
How much does it cost to replace a pool light?
$500 to $1,700 per light with fixture and labor, according to HomeGuide’s 2025 pool repair guide and Anthony & Sylvan Pools, and Angi puts the average at about $630 per unit. The fixture alone ran $374.95 to $1,469.00 for LED models at ePoolSupply on November 1, 2026. A bulb alone costs $20 to $100 (Angi).
Can you change a pool light without draining the pool?
Yes. Pentair’s IntelliBrite 5g guide says it is not necessary to drain the pool: with the breaker off, you remove the pilot screw and lift the fixture onto the deck on its coiled cord. Code requires that reach, since a wet-niche light must come out to the deck without anyone entering the water (2024 IRC E4206.5.1, NEC 680.23(B)(6)).
Are LED pool lights worth it?
On energy, yes. At 4 hours a night and the August 2026 US price of 18.16 cents per kWh, a 500 W incandescent costs $132.57 a year and a 26 W Pentair IntelliBrite 5g Color $6.89. The $125.67 saving covers that $824.95 fixture in about 6.6 years before labor, and Hayward no longer ships 100 W or 300 W incandescent lamps.
Do pool lights need a GFCI?
Yes, when they run above the low-voltage contact limit of 15 V RMS for AC. NEC 680.23(A)(3), mirrored in 2024 IRC E4206.4, requires GFCI protection on the branch circuit so lamping, relamping and servicing are protected. A 12 V light fed by a listed transformer stays under that limit. The NEC first required GFCIs on underwater pool lights in 1968. A light that keeps tripping that GFCI has a fault to find, and our guide to a pool light not working gives the safe order of checks.
Can I replace a 120V pool light with a 12V light?
Yes, with a listed 120 V to 12 V transformer between the circuit and the light (2024 IRC E4206.1). Pentair recommends no more than 3 IntelliBrite pool lights and 1 spa light on a 300 W transformer and no more than 100 ft of total cable run. Hayward publishes instructions for replacing a 120 V light with its 12 V Universal light.
How long do LED pool lights last?
Makers state it as a ratio, not hours: Hayward says its CrystaLogic LEDs last 10 times longer than incandescent bulbs. Warranties are shorter: Hayward’s Universal CrystaLogic and CrystaLogic 320 pages list 3 years on parts and 1 year on labor, and the ColorLogic 4.0 page lists 1 year on parts. Keep the receipt and registration.
Sources
- Pentair. 2023 Product Catalog: Pool Lighting (IntelliBrite 5g, MicroBrite, GloBrite). Accessed 2026-11-01.
- Pentair (copy hosted by Inyo Pools). IntelliBrite 5g Pool LED Light Installation and User's Guide, P/N 619827 Rev C. Accessed 2026-11-01.
- Hayward. 500W/120V AstroLite Series, 50 ft cord (SP0583L50), incl. DOE lamp disclaimer. Accessed 2026-11-01.
- Hayward. UCL Pool 12V 50' White 500W Equivalent (LPWUS11050). Accessed 2026-11-01.
- Hayward. Universal CrystaLogic 2.0 LED Pool Light, 37W (LPLUS22100). Accessed 2026-11-01.
- Hayward. CrystaLogic 320 1.5-inch LED Light, 30 ft cord (LAWUS11030). Accessed 2026-11-01.
- Hayward. ColorLogic 4.0 LED Pool Light, 120V/100 ft (W3SP0527LED100). Accessed 2026-11-01.
- Jandy (copy hosted by a retailer). Jandy pool and spa lighting brochure (2020). Accessed 2026-11-01.
- International Code Council via UpCodes. 2024 International Residential Code, Section E4206 Equipment Installation. Accessed 2026-11-01.
- International Code Council via UpCodes. 2024 International Residential Code, Chapter 35 definitions (low-voltage contact limit). Accessed 2026-11-01.
- U.S. Energy Information Administration. Electric Power Monthly Table 5.6.A, August 2026 (released Oct 23, 2026). Accessed 2026-11-01.
- U.S. Consumer Product Safety Commission. Don't Swim With Shocks: Electrical Safety In and Around Pools, Spas and Hot Tubs. Accessed 2026-10-26.
- U.S. Consumer Product Safety Commission. NEISS 2025 microdata (pool and spa electrical cases, PC&S analysis). Accessed 2026-10-07.
- IAEI Magazine. The History of GFCI Protection in the NEC (Summer 2024). Accessed 2026-10-07.
- IAEI Magazine / UL. UL Question Corner: fiber optic swimming pool light (Jan/Feb 2009). Accessed 2026-11-01.
- HomeGuide. How Much Does It Cost to Repair a Pool? (2025). Accessed 2026-10-08.
- Angi. How Much Do Swimming Pool Repairs Cost? (updated July 9, 2026), Wayback copy. Accessed 2026-10-08.
- Anthony & Sylvan Pools. Pool Remodeling Costs. Accessed 2026-10-08.
- ePoolSupply. Pool light listings (Pentair, Hayward, Jandy, Halco). Accessed 2026-11-01.
- Inyo Pools. Fiberstars 75 Strand 50 Ft. Fiber Optic Kit (B75K50). Accessed 2026-11-01.
- Miami-Dade County. Implementing Order 4-63, fee schedule (electrical, residential pool or spa). Accessed 2026-10-07.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.