Skip to content
Finished rectangular backyard pool with white plaster, a blue tile band and stone coping
Cost guide: gunite and shotcrete pools

Concrete Pool Cost: Gunite and Shotcrete Pools Priced Line by Line

Concrete pool cost for a typical gunite or shotcrete pool ran a $76,000 median on 2023 to 2025 Fort Worth permits; California's 2026 assessor schedule puts a 15×30 concrete pool at $42,300 to $77,850.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓Shell priced by the yardShotcrete, steel, plaster, tile and coping quantities for a 15×30, each with a dated unit price.
  • ✓Checked against permitsPermits that name gunite or shotcrete in Fort Worth, Nashville, New Orleans and three more places.
  • ✓20-year bill includedReplaster cycles for plaster, quartz and pebble, and the same math for fiberglass.
Quick answer
Concrete pools had a $76,000 median on 2023 to 2025 Fort Worth permits and $74,000 in New Orleans; California’s 2026 assessor schedule puts a 15×30 at $42,300 to $77,850. Shotcrete, steel, finishes, deck and equipment price out at $25,507 to $36,095 before crew labor. Budget one or two replasters of $5,893 to $7,653 each within 20 years.
$76,000
Fort Worth permit median, gunite or shotcrete
$94 to $173
Replacement cost per sq ft of pool surface
15.8 cubic yards
Shotcrete in a 15×30 shell, 6 in
$5,893 to $7,653
One plaster renewal, 855 sq ft

Key takeaways

  • Concrete pools declared a median $76,000 on Fort Worth permits from 2023 to 2025 and $74,000 in New Orleans, against $52,000 for fiberglass in Fort Worth, 46.2% more for concrete.
  • California BOE Assessors Handbook 531 (January 2026) prices concrete pools at $94 to $173 per sq ft of surface, $42,300 to $77,850 for a 15×30.
  • A 15×30 shell 6 in thick takes about 15.8 cubic yards of shotcrete; delivered 4,000 psi ready mix was bid at $205 to $314 a yard in Allegany County, New York in February 2026.
  • The American Shotcrete Association sets 4,000 psi as the minimum 28-day strength for pool shotcrete and recommends at least 7 days of moist curing.
  • Producer prices for concrete reinforcing bars rose 117.5% and ready-mixed concrete 42.4% from the 2019 average to September 2026 (BLS producer price index).
  • Over 20 years a plaster-finished concrete pool totals $135,893 to $171,306, including one or two replasters, against $62,000 to $82,000 for fiberglass (Fort Worth medians, Angi upkeep).

How much does a concrete pool cost in 2026?

A concrete pool had a median declared value of $74,000 in New Orleans and $76,000 in Fort Worth on 2023 to 2025 permits, and Angi’s 2026 national range is $65,000 to $120,000. California’s assessor schedule prices the pool itself at $94 to $173 per sq ft of surface, so a 15×30 runs $42,300 to $77,850 before decks and extras.

$76,000
Fort Worth gunite or shotcrete permit median, 2023 to 2025 (97 permits)
$74,000
New Orleans gunite permit median, 2023 to 2025 (201 permits)
$94 to $173
Concrete pool replacement cost per sq ft of surface, January 2026
$65,000 to $120,000
Concrete pool installed range, 2026
Source: Angi
What cost guides, pool makers and public records say a concrete pool costs
SourceType of sourceWhat it says a concrete pool costsDateWhat it measures
AngiCost guide$65,000 to $120,0002026National installed range
HomeGuideCost guide$50,000 to $120,000 with installationopened 2026-10-08National installed range
FixrCost guide$23,417 to $127,817 (sprayed concrete)January 2024National range
Thursday PoolsFiberglass maker, dealer survey$50,000 to $120,000 or more2026National installed range
River PoolsFiberglass maker$50,000 to $100,000 or moremodified 2021-08-27National installed range
PlungiePrecast pool maker$50,000 to $120,000 for the pool; $80,000 to $150,000 or more for the projectopened 2026-10-27National ranges
City of Fort Worth permitsPublic record$76,000 median (97 permits)2023 to 2025Value declared on the permit
City of New Orleans permitsPublic record$74,000 median (201 permits)2023 to 2025Value declared on the permit
Metro Nashville permitsPublic record$164,225 median (54 permits)2024 to 2025Value declared on the permit
California BOE, AH 531State assessor schedule$94 to $173 per sq ft of pool surfaceJanuary 2026Replacement cost for tax assessment
City of San Diego, IB-101City valuation schedule$114 per sq ft of surface area (gunite)January 2024Permit valuation, not a price

Sources: Angi, HomeGuide, Fixr, Thursday Pools, River Pools, Plungie, PC&S permit analysis, California BOE, City of San Diego IB-101; accessed 2026-10-27 unless noted. Download CSV

The guides agree on the order but not the level. Angi’s $65,000 to $120,000 and HomeGuide’s $50,000 to $120,000 are national installed ranges (HomeGuide), while River Pools, a fiberglass maker, still prints $50,000 to $100,000 or more on a page last modified in August 2021 (River Pools). The City of San Diego, which values permits by surface area, uses $114 per sq ft for gunite and $124 for fiberglass (IB-101), the reverse of the California assessor ranking.

Public records show what owners declared. Fort Worth’s 97 permits that named gunite or shotcrete from 2023 to 2025 had a median of $76,000, New Orleans’s 201 a median of $74,000, and Nashville’s 54 permits in 2024 and 2025 a median of $164,225 (PC&S permit study). Nashville permits that state dimensions show a median pool of 544 sq ft, larger than the 450 sq ft of a 15×30.

Concrete pool cost: key numbers with date, place and source
MeasureFigureDate and placeSource
Gunite or shotcrete permit median, Fort Worth$76,0002023 to 2025, 97 permitsPC&S analysis of City of Fort Worth permit data
Gunite or shotcrete permit median, New Orleans$74,0002023 to 2025, 201 permitsPC&S analysis of City of New Orleans permit data
Concrete pool replacement cost per sq ft of surface$94 to $173California, January 2026California BOE, AH 531
15 x 30 ft concrete pool at that rate$42,300 to $77,850California, January 2026PC&S calculation from California BOE
Shotcrete in a 15 x 30 ft shell, 6 in thick15.8 cubic yards4.5 ft average depthPC&S calculation
Delivered 4,000 psi ready mix$205 to $314 per cubic yardAllegany County, NY, Feb 26, 2026County bid tabulation
ASA minimum compressive strength for pool shotcrete4,000 psi at 28 daysUnited StatesAmerican Shotcrete Association, Position Statement #1
ASA minimum moist curing7 daysUnited StatesAmerican Shotcrete Association pool FAQ
One plaster renewal, 15 x 30 ft pool$5,893 to $7,653855 sq ft interiorPC&S calculation from HomeGuide prices

Sources: PC&S permit analysis, California BOE AH 531, Allegany County bid tabulation, ASA Position Statement #1, ASA pool FAQ, HomeGuide; accessed 2026-10-27. Download CSV

What does each line of a gunite pool cost?

Priced from published unit costs, a 15×30 gunite pool with a white plaster interior comes to $25,507 to $36,095 for the dig, steel, shotcrete material, plaster, tile, coping, deck, plumbing, equipment, electrical, permit and water. Against the $76,000 Fort Worth permit median, that leaves $39,905 to $50,493 for the shell crew, forming, engineering, overhead and margin.

Line-item budget for a 15 x 30 ft gunite or shotcrete pool, 4.5 ft average depth, plaster finish, 2026
Line itemUnit cost usedQuantityLow $High $Source
Excavation, ordinary soil$8 to $25 per cubic yard (Angi)100.7 cubic yards8062,519Angi, pool excavation cost (March 2025)
Steel: #4 bars at 12 in each way$10.45 per 20 ft Grade 60 bar (Supply OnTime, Los Angeles)86 bars (1,710 ft)899899Supply OnTime listing, Wayback capture 2026-10-01
Shotcrete material, 4,000 psi, 6 in shell$205 to $314 per cubic yard delivered (Allegany County bid)15.8 cubic yards3,2464,972Allegany County, NY, ready mix bid tabulation (Feb 26, 2026)
White plaster interior$6 to $8 per sq ft (HomeGuide)855 sq ft5,1306,840HomeGuide, pool resurfacing cost (2025)
Waterline tile, 6 in band$25 to $30 per sq ft (Anthony & Sylvan)45 sq ft1,1251,350Anthony & Sylvan, pool remodel cost (Nov 2025)
Coping$30 to $50 per linear foot (Anthony & Sylvan)90 linear ft2,7004,500Anthony & Sylvan, pool remodel cost (Nov 2025)
Concrete deck, 3 ft border$13.35 per sq ft (California BOE)306 sq ft4,0854,085California BOE, AH 531 (January 2026)
Plumbing fittings and pipe$300 to $600 (River Pools figure for a kit pool)1 pool300600River Pools, DIY fiberglass pools (modified 2024-12-19)
Variable-speed pump and cartridge filterLowest to highest 2026 retail listing, both items1 set2,8843,998PC&S pool equipment prices study (2026 listings)
Electrical workBudget at least $3,000 to $5,000 (Thursday Pools)1 pool3,0005,000Thursday Pools, inground pool cost 2026
Building permit, Fort WorthFee total at a $68,000 valuation1 permit1,1701,170PC&S pool permit cost ledger (Fort Worth schedule effective 2026-10-01)
Water to fill$215.09 per 20,000 gallons (PC&S median of 25 cities)15,147 gallons163163PC&S cost to fill a pool study
Priced lines, total25,50736,095PC&S sum of the lines above
Fort Worth gunite or shotcrete permit medianDeclared value, 2023 to 20251 pool76,00076,000PC&S permit analysis
Left for shell crew, forming, steel tying, engineering, overhead and marginPermit median minus priced lines39,90550,493PC&S calculation

Sources: Angi pool excavation cost, Supply OnTime #4 rebar listing (Wayback), Allegany County ready mix bid, HomeGuide, Anthony & Sylvan, California BOE AH 531, River Pools, PC&S equipment prices, Thursday Pools, PC&S permit cost ledger; accessed 2026-10-27. Download CSV

Where a $76,000 concrete pool goes, 15 x 30 ft gunite pool priced against the Fort Worth permit medianShare of the permit median; each bar sums to the median
Where a $76,000 concrete pool goes, 15 x 30 ft gunite pool priced against the Fort Worth permit medianStacked bar chart: priced materials and installed finishes are 34% to 47% of the median; crew, engineering, overhead and margin 53% to 66%.Low end of each lineLow end of each line, Dig: $806Low end of each line, Steel and shotcrete material: $4,145Low end of each line, Plaster, tile, coping: $8,955Low end of each line, Plumbing, equipment, electrical: $6,184Low end of each line, Deck, permit, water: $5,418Low end of each line, Crew, engineering, overhead, margin: $50,493High end of each lineHigh end of each line, Dig: $2,519High end of each line, Steel and shotcrete material: $5,870High end of each line, Plaster, tile, coping: $12,690High end of each line, Plumbing, equipment, electrical: $9,598High end of each line, Deck, permit, water: $5,418High end of each line, Crew, engineering, overhead, margin: $39,905DigSteel and shotcrete materialPlaster, tile, copingPlumbing, equipment, electricalDeck, permit, waterCrew, engineering, overhead, margin

Dollar values for every line are in the line-item table above the chart.

Source: PC&S line-item model from Angi, Supply OnTime, Allegany County, HomeGuide, Anthony & Sylvan, California BOE, River Pools, Thursday Pools and PC&S studies. Download chart data (CSV)

Quantities are PC&S arithmetic on a 15 x 30 ft pool with a 4.5 ft average depth: 855 sq ft of interior to shoot and plaster, 15.8 cubic yards of shotcrete at 6 in thick, 86 bars of 20 ft #4 rebar, 100.7 cubic yards of dig and a 306 sq ft deck border. The tile and coping prices are remodel and repair rates from Anthony & Sylvan, a pool builder: $25 to $30 per sq ft of tile and $30 to $50 per linear ft of coping repair. New coping runs $6 to $60 per linear ft by material (pool coping costs), so this line can come in higher or lower. Tile types, absorption limits and grout standards for that band are compared in our pool waterline tile guide. New coping by material, from $6 per linear foot for poured cantilever concrete to $60 for stone, is compared in our pool coping guide.

The residual is the largest share, 53% to 66% of the median, because a concrete pool is built in place: the steel is tied, the shell shot and trimmed, and the bond beam formed on site by crews whose time none of our sources prices per job. The materials themselves are modest; the shotcrete in this shell costs $3,246 to $4,972 and the steel $899. What a vanishing edge adds to the same 15×30 shell, from the catch basin to a second pump, is priced line by line in our infinity pool cost guide.

How much shotcrete and steel does a pool shell need?

A 15×30 pool with a 4.5 ft average depth has about 855 sq ft of shell; at 6 in thick that is 15.8 cubic yards of shotcrete, and #4 bars at 12 in each way need about 1,710 ft of steel, 86 bars of 20 ft. At 2026 prices the shotcrete material costs $3,246 to $4,972 and the steel $899.

Shell quantities for a 15 x 30 ft pool: 855 sq ft of interior, 15.8 cubic yards of shotcrete at 6 in, 86 #4 bars at 12 in each way (PC&S arithmetic; inputs in the table below).
Shell quantities for a 15 x 30 ft pool: 855 sq ft of interior, 15.8 cubic yards of shotcrete at 6 in, 86 #4 bars at 12 in each way (PC&S arithmetic; inputs in the table below).
Worked arithmetic: shell area, shotcrete volume, steel and dig for a 15 x 30 ft concrete pool
StepInputArithmeticResultSource of the input
Water surface15 ft x 30 ft15 x 30450 sq ftExample size
Interior to shoot and plasterAverage depth 4.5 ft450 + 2 x (15 + 30) x 4.5855 sq ftPC&S assumption; same method as the PC&S resurfacing guide
Shotcrete volumeShell 6 in thick855 x 0.5 / 2715.8 cubic yardsAssumed thickness; the pool engineer sets the real figure
Shotcrete material cost$205 to $314 per cubic yard15.83 x 205 and x 314$3,246 to $4,972Allegany County, NY bid tabulation, Feb 26, 2026
Steel length#4 bars at 12 in each way855 x 2 ft per sq ft1,710 ftASA (Reeves 2018): #4 minimum, 12 in typical
Steel bars and cost20 ft bars at $10.451,710 / 20, rounded up, x 10.4586 bars, $899Supply OnTime listing, Wayback capture 2026-10-01
Excavation1 ft beyond the shell each side, 6 in deeper(30 + 2) x (15 + 2) x 5.0 / 27100.7 cubic yardsPC&S assumption
Waterline tile6 in band on a 90 ft perimeter90 x 0.545 sq ftPC&S assumption

Sources: PC&S calculation; Allegany County bid tabulation; ASA, Inadequate Reinforcement in Swimming Pools (2018); Supply OnTime listing. Download CSV

The strength target is not optional. The American Shotcrete Association Pool and Recreational Shotcrete Committee reaffirmed 4,000 psi as the minimum in-place strength for pool concrete, matching the ACI 318-08 requirement for a P1 exposure with a water-cementitious ratio no greater than 0.50. ASA notes some pool builders consider 2,500 psi adequate; a bid at that figure is worth questioning.

ASA Position Statement #1: 4,000 psi minimum for pool shotcrete, and the ACI 318-08 P1 exposure limit of a 0.50 water-cementitious ratio. Page 1 of the shotcrete.org PDF, accessed 2026-10-27.
ASA Position Statement #1: 4,000 psi minimum for pool shotcrete, and the ACI 318-08 P1 exposure limit of a 0.50 water-cementitious ratio. Page 1 of the shotcrete.org PDF, accessed 2026-10-27.

Steel follows the engineer’s plan, but ASA gives the floor: a No. 4 bar is the minimum size for pools, a 12 in grid each way is typical, and many projects call for 8 or 6 in spacing (ASA, Reeves 2018). Halving the spacing to 6 in roughly doubles the 86 bars in this example. Producer prices for concrete reinforcing bars stood at 164.8 in 2025 against 100 in 2019, so steel is a line that moved.

Gunite or shotcrete: does the method change the price?

No public source shows a reliable price gap between gunite and wet-mix shotcrete. The American Shotcrete Association treats both as shotcrete with the same 4,000 psi minimum, and Nashville permits that named shotcrete had a $171,829 median (11 permits) against $163,450 for gunite (43), too few to call a difference.

Gunite (dry-mix) vs wet-mix shotcrete for pool shells, with the source for each line
AttributeGunite (dry-mix shotcrete)Shotcrete (wet-mix)Source
How it is placedDry sand and cement shot through a hose; water added at the nozzleReady-mixed concrete pumped and shotASA, Gunite Versus Shotcrete (2018)
Typical water-cementitious ratio0.35 to 0.400.40 to 0.45ASA (2018)
ASA minimum 28-day strength for pools4,000 psi4,000 psiASA Position Statement #1
Limit for water-holding concrete (ACI 350)w/cm 0.45 max, 4,000 psi minw/cm 0.45 max, 4,000 psi minASA (2018), citing ACI 350
Freeze-thaw exposure (ACI 350)w/cm 0.42 max, 4,500 psi minw/cm 0.42 max, 4,500 psi minASA (2018), citing ACI 350
Published material priceBatched on site; no public per-yard price found$205 to $314 per cubic yard delivered (4,000 psi)Allegany County, NY bid tabulation (2026)
Nashville permits naming it, 2024 to 202543 permits, median $163,45011 permits, median $171,829PC&S analysis of Metro Nashville permits

Sources: ASA, Gunite Versus Shotcrete in Swimming Pool Construction (2018), ASA Position Statement #1, Allegany County bid tabulation, PC&S permit analysis. Download CSV

The difference that matters is water. ASA reports that dry-mix gunite usually runs a water-cementitious ratio of 0.35 to 0.40 and wet-mix 0.40 to 0.45, and that ACI 350 caps water-holding concrete at 0.45 with 4,000 psi, or 0.42 with 4,500 psi where the concrete freezes while saturated (ASA 2018). ASA also warns that adding water to stiffening wet-mix on site can push the ratio above 0.50, and its Position Statement #5 points to the ACI Committee 506 guides and specifications as the governing shotcrete standards (ASA PS #5).

Because gunite is batched from dry sand and cement on site, it has no per-yard delivered price to compare. Wet-mix uses ordinary ready mix, bid at $205 to $314 a cubic yard delivered in Allegany County, New York in February 2026, which is why the line-item budget prices shotcrete material from that public bid. For how these shells compare with fiberglass and vinyl beyond cost, see our gunite vs fiberglass vs vinyl pool guide.

What do building permits say concrete pools cost?

Medians for permits that name gunite or shotcrete ran from $35,000 in Los Angeles to $164,225 in Nashville. Fort Worth sat at $76,000, New Orleans at $74,000 and East Baton Rouge Parish at $88,925. Where the same city records fiberglass, concrete was higher: 46.2% in Fort Worth and 54.6% in Nashville.

Declared value of new concrete pool permits by city, 2023 to 2025, with fiberglass for comparisonBar = 25th to 75th percentile, dot = median, US dollars; permit count in brackets
Declared value of new concrete pool permits by city, 2023 to 2025, with fiberglass for comparisonRange chart of concrete pool permit medians: Nashville $164,225, East Baton Rouge $88,925, Fort Worth $76,000, New Orleans $74,000, Los Angeles $35,000; fiberglass lower in Nashville and Fort Worth.$0$62,500$125,000$187,500$250,000Nashville gunite or shotcrete (54): $105,250 to $215,309, point $164,225Nashville gunite or shotcrete (54)Nashville fiberglass (63): $79,892 to $142,758, point $106,227Nashville fiberglass (63)East Baton Rouge gunite (202): $59,188 to $120,000, point $88,925East Baton Rouge gunite (202)Fort Worth gunite or shotcrete (97): $62,450 to $90,000, point $76,000Fort Worth gunite or shotcrete (97)Fort Worth fiberglass (68): $28,000 to $58,764, point $52,000Fort Worth fiberglass (68)New Orleans gunite (201): $65,000 to $88,800, point $74,000New Orleans gunite (201)Los Angeles gunite or shotcrete (21): $30,000 to $60,000, point $35,000Los Angeles gunite or shotcrete (21)

Same figures, plus Montgomery County, are in the permit table below the chart.

Source: PC&S analysis of city open-data building permits (Nashville 2024 to 2025; East Baton Rouge 2023 to 2024). Download chart data (CSV)

Declared value of new residential in-ground pool permits that name gunite, shotcrete or fiberglass, 2023 to 2025
CityShell material in permit textPermits25th percentile $Median $75th percentile $Most common value $ (share)Median stated pool area, sq ftMedian value per sq ft $
Nashville-Davidson, TN (2024 to 2025)Gunite or shotcrete54105,250164,225215,309100,000 (7.4%)544354
Nashville-Davidson, TN (2024 to 2025)Fiberglass6379,892106,227142,75872,880 (4.8%)420283
East Baton Rouge Parish, LA (2023 to 2024)Gunite or shotcrete20259,18888,925120,000100,000 (7.4%)
Fort Worth, TXGunite or shotcrete9762,45076,00090,00090,000 (8.2%)
Fort Worth, TXFiberglass6828,00052,00058,76424,000 (17.6%)360139
New Orleans, LAGunite or shotcrete20165,00074,00088,80068,700 (2.0%)350237
Montgomery County, MDGunite or shotcrete2450,00050,00081,25050,000 (41.7%) (flag: many permits share one round value)76086
Los Angeles, CAGunite or shotcrete2130,00035,00060,00035,000 (14.3%)44985

Source: PC&S analysis of city open-data permits used in the average cost to build a pool study (extract pulled 2026-10-03); Nashville 2024 to 2025, East Baton Rouge 2023 to 2024. Download CSV

The figures come from 618 gunite or shotcrete and 226 fiberglass permits across 12 cities from 2023 to 2025, values from $5,000 to $1,000,000, with at least 20 permits per city and material. Size drives much of the spread: New Orleans permits that state dimensions show a median 350 sq ft pool at $237 per sq ft, Nashville 544 sq ft at $354, and Los Angeles $85 per sq ft.

Why do concrete pools cost more than they did in 2019?

The two materials a shell is made of got dearer. The BLS producer price index for concrete reinforcing bars was 117.5% above its 2019 average in September 2026, and ready-mixed concrete was 42.4% higher. Labor and overhead, the largest share of a concrete pool, are not in these indexes.

Producer prices for rebar and ready-mixed concrete, United States, 2019 = 100Annual averages 2019 to 2025, then September 2026 (preliminary)
Producer prices for rebar and ready-mixed concrete, United States, 2019 = 100Line chart: rebar producer prices up 117.5% and ready-mixed concrete up 42.4% from the 2019 average to September 2026.062.51251882502019202020212022202320242025Sep 2026Concrete reinforcing bars, 2019: 100Concrete reinforcing bars, 2020: 100Concrete reinforcing bars, 2021: 134Concrete reinforcing bars, 2022: 168Concrete reinforcing bars, 2023: 168Concrete reinforcing bars, 2024: 153Concrete reinforcing bars, 2025: 165Concrete reinforcing bars, Sep 2026: 218Concrete reinforcing barsReady-mixed concrete, 2019: 100Ready-mixed concrete, 2020: 102Ready-mixed concrete, 2021: 106Ready-mixed concrete, 2022: 118Ready-mixed concrete, 2023: 131Ready-mixed concrete, 2024: 138Ready-mixed concrete, 2025: 139Ready-mixed concrete, Sep 2026: 142Ready-mixed concrete

Index values for every year are in the table below the chart.

Source: U.S. Bureau of Labor Statistics, Producer Price Index series PCU3323123323121 and PCU327320327320 (rebased by PC&S). Download chart data (CSV)

Producer price indexes for concrete reinforcing bars and ready-mixed concrete, annual averages 2019 to 2025 and September 2026
PeriodConcrete reinforcing bars, PPIRebar, 2019 = 100Ready-mixed concrete, PPIReady mix, 2019 = 100
2019210.3100.0283.0100.0
2020210.9100.2290.2102.5
2021282.8134.4301.0106.4
2022352.4167.6333.0117.7
2023354.2168.4369.7130.6
2024321.9153.0390.9138.1
2025346.7164.8394.2139.3
Sep 2026 (preliminary)457.5217.5402.8142.4

Source: BLS PPI PCU3323123323121 and BLS PPI PCU327320327320, retrieved through the BLS public API on 2026-10-27; rebased to 2019 = 100 by PC&S. Download CSV

Rebar is the volatile one: its index jumped from 210.9 in 2020 to 352.4 in 2022, eased to 321.9 in 2024 and reached 457.5 in September 2026 (preliminary). Ready mix climbed every year, from 283.0 in 2019 to 394.2 in 2025. On the 15×30 example the steel and shotcrete lines together are under 8% of the Fort Worth median, so these swings move a bid by hundreds of dollars, not tens of thousands.

Compare concrete pool bids for your yard

What does a concrete pool cost over 20 years?

Over 20 years a 15×30 concrete pool with a plaster finish adds one or two replasters at $5,893 to $7,653 each, and upkeep of $2,700 to $4,000 a year in Angi’s 2026 range. Built at the Fort Worth median, the total is $135,893 to $171,306, against $62,000 to $82,000 for a fiberglass pool.

When the interior of a concrete pool comes due: plaster at 7 to 12 years, quartz at 10 to 15 and pebble at 15 to 20 or more (HomeGuide), with acid washes every 3 to 5 years.
When the interior of a concrete pool comes due: plaster at 7 to 12 years, quartz at 10 to 15 and pebble at 15 to 20 or more (HomeGuide), with acid washes every 3 to 5 years.
Twenty-year interior finish cost for a 15 x 30 ft concrete pool (855 sq ft), first finish plus renewals, 2025 prices
Interior finishPrice per sq ft (HomeGuide)Lifespan (HomeGuide)First finish, 855 sq ft $Renewals within 20 yearsCost per renewal $ (finish + drain and clean + water)Finish spending over 20 years $
White plaster$6 to $87 to 12 years5,130 to 6,8401 to 25,893 to 7,65311,023 to 22,146
Quartz$7 to $1010 to 15 years5,985 to 8,55016,748 to 9,36312,733 to 17,913
Pebble$7 to $1515 to 20+ years5,985 to 12,8250 to 16,748 to 13,6385,985 to 26,463

Sources: HomeGuide (finish prices, lifespans, $600 to $650 drain and clean); refill water at the PC&S median of $215.09 per 20,000 gallons; PC&S calculation. Download CSV

Finish choice moves the 20-year bill less than the sticker suggests. Plaster is cheapest to apply but may need two renewals in 20 years, so its total runs $11,023 to $22,146; pebble costs more up front but may need none, $5,985 to $26,463. Maker warranties and start-up rules for each finish are compared in our pool finishes guide.

Twenty-year cost of a concrete and a fiberglass pool on Fort Worth permit medians, no inflation
Pool typeBuild: Fort Worth permit median, 2023 to 2025 $Upkeep, 20 years at Angi yearly range $Interior renewal within 20 years $20-year total $Sources
Concrete (gunite or shotcrete), plaster finish76,00054,000 to 80,0005,893 to 15,306 (one or two replasters, 855 sq ft)135,893 to 171,306City of Fort Worth permits; Angi 2026 ($2,700 to $4,000 a year); HomeGuide
Fiberglass52,00010,000 to 30,0000 (gelcoat is not replastered)62,000 to 82,000City of Fort Worth permits; Angi 2026 ($500 to $1,500 a year)

Sources: PC&S permit analysis; Angi 2026 maintenance ranges; HomeGuide. Download CSV

Upkeep is the bigger lever: 20 years at Angi’s $2,700 to $4,000 a year is $54,000 to $80,000 for concrete, against $10,000 to $30,000 for fiberglass (Angi). HomeGuide and Thursday Pools also list acid washes every 3 to 5 years at $300 to $1,000. The fiberglass side of the comparison, with its own line items, is in our fiberglass pool cost guide, and full resurfacing quotes by finish are in the pool resurfacing cost guide.

Which concrete pool budget fits your situation?

Concrete is the right budget line when the pool must be wider than 16 ft, oddly shaped or built with a raised spa. Inside that choice, the thresholds that change cost are shotcrete strength (4,000 psi), freeze exposure (4,500 psi), bar size and spacing (#4 at 12 in), curing time (7 days) and the interior finish.

Concrete pool decision table: thresholds, actions and the source for each
If your situation isDo thisWhy (source)
You need a pool wider than 16 ft, a custom shape or a raised spaPlan on concreteRiver Pools: fiberglass shells top out near 16 ft wide; shotcrete can form virtually any size and shape (ASA)
A bid specifies 2,500 psi shotcreteAsk for 4,000 psi at 28 days in the contractASA Position Statement #1; ACI 318-08 P1 exposure
Your pool will freeze while fullAsk for 4,500 psi and a water-cementitious ratio of 0.42 or lessASA (2018), citing ACI 350
The plan shows bars smaller than #4 or spaced over 12 inAsk the pool engineer to confirm the designASA (Reeves 2018): #4 is the minimum bar; 12 in each way is typical, many designs use 8 or 6 in
The builder plans to plaster within days of shootingAsk how the shell will be kept wet for at least 7 daysASA pool FAQ: minimum 7 days of curing
You want the lowest first cost for the interiorWhite plaster$6 to $8 per sq ft; $5,130 to $6,840 for 855 sq ft (HomeGuide)
You want the lowest finish spending over 20 years and accept texturePebble, if bid at the low end$5,985 to $26,463 vs $11,023 to $22,146 for plaster (PC&S from HomeGuide)
Your shape fits a shell up to 16 ft wide and 20-year cost matters mostPrice fiberglass too20-year totals: $135,893 to $171,306 concrete vs $62,000 to $82,000 fiberglass
You will borrow to pay for itCompare APR, term and draw schedule across lendersSee the PC&S pool financing guide; this page is not financial advice

Sources: River Pools, ASA Position Statement #1, ASA 2018, ASA, Reeves 2018, ASA pool FAQ, HomeGuide; PC&S calculations. Download CSV

Can you build a concrete pool for $30,000? Not a 15×30 in most markets on these numbers: the priced lines alone come to $25,507 to $36,095 before the shell crew, and California’s assessor schedule starts a 15×30 concrete pool at $42,300. Los Angeles permits that name gunite or shotcrete declared a $35,000 median, but those values run below every cost guide. The inground pool cost guide shows what smaller vinyl and fiberglass pools cost.

How long does a concrete pool take to build and cure?

A concrete pool takes about 6 to 8 weeks to build once permitted, per HomeGuide, and two waits are set by the materials. The American Shotcrete Association recommends at least 7 days of moist curing for the shell, and the National Plasterers Council start-up procedure keeps chlorine out for 48 hours and salt out for 30 days.

  1. Permit and engineeringMedian permit waits ran from 1 to 70 days across 12 jurisdictions in 2025 (PC&S permit timing study); Fort Worth fees total $1,169.83 at a $68,000 valuation.
  2. DigAbout 100.7 cubic yards for a 15 x 30 ft pool at $8 to $25 per cubic yard in ordinary soil, $40 to $100 in rock (Angi).
  3. Steel and plumbing#4 bars at 12 in each way at minimum (86 bars of 20 ft here); lines and fittings set before the shoot.
  4. Shoot the shellAbout 15.8 cubic yards of 4,000 psi concrete; ASA says properly placed shotcrete can go on in layers without a cold joint.
  5. CureKeep the shell wet for at least 7 days (ASA pool FAQ) before tile and plaster work stresses it.
  6. Tile, coping and deck90 linear ft of coping at $30 to $50 per ft and a 306 sq ft deck at $13.35 per sq ft.
  7. Plaster855 sq ft at $6 to $8 per sq ft for white plaster (HomeGuide).
  8. Start-upNo chlorine for 48 hours and no salt for 30 days, per the National Plasterers Council start-up procedure (REV 03-2021).

The order of work, inspections and payment stages for any in-ground pool is laid out by our inground pool builders page. Pump and filter prices in the budget table come from our pool equipment prices study of 2026 retail listings.

How we compiled this

We read 28 documents in October 2026: five American Shotcrete Association documents, a county ready-mix bid tabulation, a supplier rebar listing, two BLS price index series, the California BOE assessor schedule, the City of San Diego valuation bulletin, 11 cost and pricing pages from Angi, HomeGuide, Fixr, Thursday Pools, River Pools, Plungie and Anthony & Sylvan, the National Plasterers Council start-up procedure, and five earlier PC&S studies. The permit figures are our own analysis of 844 city permits that name the shell material. We did not build a pool or collect bids; every figure is quoted from those documents or calculated from them with the inputs shown.

Frequently Asked Questions

What is the average cost of a concrete inground pool?

Permits that name gunite or shotcrete had medians of $74,000 in New Orleans and $76,000 in Fort Worth (2023 to 2025), $88,925 in East Baton Rouge Parish and $164,225 in Nashville, where pools are larger. Angi’s 2026 national range is $65,000 to $120,000, and California’s assessor schedule prices a 15×30 at $42,300 to $77,850.

How much does a 20×40 gunite pool cost?

California’s 2026 assessor rate of $94 to $173 per sq ft puts an 800 sq ft 20×40 concrete pool at $75,200 to $138,400. Its shell has about 1,400 sq ft of interior at a 5 ft average depth, roughly 25.9 cubic yards of shotcrete at 6 in, before decking, a spa or other features.

How much more expensive is a concrete pool?

In the same cities, concrete permits declared 46.2% more than fiberglass in Fort Worth ($76,000 vs $52,000, 2023 to 2025) and 54.6% more in Nashville ($164,225 vs $106,227, 2024 to 2025). Angi’s 2026 ranges are $65,000 to $120,000 for concrete and $55,000 to $100,000 for fiberglass, and upkeep runs $2,700 to $4,000 a year against $500 to $1,500.

Can I get an inground pool for $30,000?

Not a full-size concrete pool on these figures: the priced materials, finishes and equipment for a 15×30 alone come to $25,507 to $36,095 before the shell crew, and California’s assessor schedule starts a 15×30 concrete pool at $42,300. A small vinyl or fiberglass pool is the more likely route at that budget.

What is the cost of gunite per cubic yard?

Ready-mixed 4,000 psi concrete, the material wet-mix shotcrete uses, was bid at $205 to $314 per cubic yard delivered in Allegany County, New York in February 2026. That is material only; the nozzle crew and pump are extra. Dry-mix gunite is batched on site from sand and cement, so ask the builder for its per-yard price.

What are the disadvantages of a gunite pool?

Cost and upkeep. Angi puts yearly maintenance at $2,700 to $4,000 against $500 to $1,500 for fiberglass, HomeGuide expects resurfacing every 10 to 15 years at $8,000 to $10,000 and acid washes every 3 to 5 years, and the build takes 6 to 8 weeks plus a 7-day minimum cure (ASA). What each of those acid washes involves, from the 1:2 dilution to soda ash and discharge rules, is in our pool acid wash guide.

Which is better, gunite or shotcrete?

Neither, by strength alone. The American Shotcrete Association treats both as shotcrete and sets the same 4,000 psi minimum; dry-mix gunite usually runs a lower water-cementitious ratio (0.35 to 0.40) than wet-mix (0.40 to 0.45). ASA says both work well when placed by a trained crew, so ask about crew certification, strength testing and curing.

Sources

  1. American Shotcrete Association. Compressive (Strength) Values of Pool Shotcrete, Position Statement #1. Accessed 2026-10-27.
  2. American Shotcrete Association. Gunite Versus Shotcrete in Swimming Pool Construction (Shotcrete, Summer 2018). Accessed 2026-10-27.
  3. American Shotcrete Association. Inadequate Reinforcement in Swimming Pools (Shotcrete, Summer 2018). Accessed 2026-10-27.
  4. American Shotcrete Association. Pool FAQs. Accessed 2026-10-27.
  5. American Shotcrete Association. Monolithic Shotcrete for Swimming Pools (No Cold Joints), Position Statement #5. Accessed 2026-10-27.
  6. Allegany County Department of Public Works. Bid Tabulation, Ready Mix Concrete and Flowable Fill (February 26, 2026). Accessed 2026-10-27.
  7. Supply OnTime. Rebar #4 1/2 in. x 20 ft Grade 60 (Wayback Machine capture, October 1, 2026). Accessed 2026-10-27.
  8. U.S. Bureau of Labor Statistics. PPI: Fabricated structural metal bar joists and concrete reinforcing bars. Accessed 2026-10-27.
  9. U.S. Bureau of Labor Statistics. PPI: Ready-mix concrete manufacturing. Accessed 2026-10-27.
  10. California State Board of Equalization. Assessors' Handbook Section 531, Residential Building Costs (January 2026). Accessed 2026-10-27.
  11. City of San Diego Development Services. Information Bulletin 101, Building Valuation Schedule (January 2024). Accessed 2026-10-27.
  12. Angi. How Much Does an In-Ground Pool Cost? (Wayback Machine capture, August 17, 2026). Accessed 2026-10-27.
  13. Angi. Pool Excavation Cost (updated March 14, 2025; Wayback Machine capture). Accessed 2026-10-27.
  14. HomeGuide. How Much Does An Inground Pool Cost?. Accessed 2026-10-08.
  15. HomeGuide. How Much Does Pool Resurfacing Cost?. Accessed 2026-10-08.
  16. Fixr. How Much Does It Cost to Build a Swimming Pool?. Accessed 2026-10-08.
  17. Thursday Pools. Inground Pool Cost in 2026. Accessed 2026-10-27.
  18. River Pools. Inground Concrete Swimming Pool Cost and Price Guide. Accessed 2026-10-27.
  19. River Pools. What Are the Biggest and Smallest Sizes for Fiberglass Pools?. Accessed 2026-10-27.
  20. River Pools. Do It Yourself Fiberglass Pools. Accessed 2026-10-27.
  21. Plungie. How Much Does a Concrete Pool Cost?. Accessed 2026-10-27.
  22. Anthony & Sylvan Pools. Pool Remodel Cost. Accessed 2026-10-08.
  23. National Plasterers Council. NPC Start-Up Procedure (REV 03-2021). Accessed 2026-10-08.
  24. Pool Construction & Service. Average cost to build a pool (city permit extract). Accessed 2026-10-27.
  25. Pool Construction & Service. Pool permit cost ledger. Accessed 2026-10-27.
  26. Pool Construction & Service. Pool equipment prices. Accessed 2026-10-27.
  27. Pool Construction & Service. Cost to fill a pool. Accessed 2026-10-27.
  28. Pool Construction & Service. Pool permit processing time. Accessed 2026-10-27.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.