Skip to content
Light textured concrete pool deck around a backyard pool
Guide: resurfacing an existing pool deck

Pool Deck Resurfacing Cost: Overlays, Coatings and Pavers Priced per Square Foot

Pool deck resurfacing cost runs $4 to $8 per square foot for basic work and $6 to $14 for stamped overlays (ConcreteNetwork, 2026); materials alone for a 600 sq ft deck run $122 to $3,724.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓Materials math, shownMaker coverage rates times dated seller prices for nine products, for a 600 sq ft deck.
  • ✓Downtime by productFrom 8 hours to walk on Re-Cap to 28 days before furniture goes back on Kool Deck Elite.
  • ✓Slip rules read at the sourceISPSC 306.2 applies 0.42 DCOF only where a deck is evaluated; ANSI A326.3 sets no pool deck value.
Quick answer
Expect $4 to $8 per square foot for basic pool deck resurfacing and $6 to $14 for a stamped overlay (ConcreteNetwork, 2026), or $2,400 to $8,400 for a 600 sq ft deck. Materials alone run $195 to $275 for a spray texture and $1,025 to $1,230 for a stamped overlay. Replace instead if the slab drains toward the pool.
$4 to $8 per sq ft
Basic resurfacing, installed
$6 to $14 per sq ft
Stamped overlay, installed
$195 to $275
Spray texture materials, 600 sq ft
Every 18 to 24 months
Film sealer recoat
Source: Brickform

Key takeaways

  • ConcreteNetwork prices basic pool deck resurfacing at $4 to $8 per sq ft and decorative overlays at $6 to $12+ (updated February 13, 2026); a stamped overlay runs $6 to $14 (ConcreteNetwork, June 4, 2026).
  • Materials for a 600 sq ft deck cost $122 to $3,724 depending on the option, by our math from maker coverage rates and October 2026 seller prices: about $260 for SGM One-Step Spray Deck, $1,230 for SureCrete SureStamp at 1/4 in.
  • Thickness drives bag counts: one 40 lb bag of QUIKRETE Re-Cap covers 65 sq ft at 1/16 in but only 16 sq ft at 1/4 in.
  • Downtime runs from 8 hours to walk on Re-Cap to 28 days before heavy furniture goes back on Mortex Kool Deck Elite.
  • Section 306.2 of the 2024 ISPSC requires slip-resistant decks and applies a 0.42 wet DCOF only where a surface is evaluated; ANSI A326.3 gives no DCOF value for pool decks.
  • Film sealers need a new coat every 18 to 24 months and penetrating sealers last 3 to 5 years, per Brickform.
Pool deck resurfacing cost: key numbers with source and date
Key numberValueSource and date
Basic pool deck resurfacing, installed$4 to $8 per sq ftConcreteNetwork, updated Feb 13, 2026
Decorative overlay, installed$6 to $12+ per sq ftConcreteNetwork, updated Feb 13, 2026
Stamped concrete overlay, installed$6 to $14 per sq ftConcreteNetwork, updated June 4, 2026
Materials for a 600 sq ft deck, cheapest to dearest option in our table$122 to $3,724PC&S calculation from maker coverage and seller prices, Oct 27, 2026
Roll-on acrylic coating kit$259 per 200 sq ft (2 coats)Encore Coatings, Oct 27, 2026
Thickness and coverage, QUIKRETE Re-Cap 40 lb bag65 sq ft at 1/16 in; 16 sq ft at 1/4 inQUIKRETE data sheet No. 1131
Film sealer recoat intervalEvery 18 to 24 monthsBrickform pool deck sealer guide
Pool deck estimated useful life15 yearsHUD CNA e-Tool, row 3.2.7.6
Wet DCOF in the pool code0.42 only where a surface is evaluated (ISPSC 306.2); no pool deck value in ANSI A326.3ICC ISPSC 2024; ANSI A326.3-2021

Sources: ConcreteNetwork; ConcreteNetwork; Encore Coatings; QUIKRETE; Brickform; HUD; ICC; TCNA; PC&S calculation. Download CSV

How much does pool deck resurfacing cost?

Pool deck resurfacing cost runs $4 to $8 per square foot for a basic texture or thin overlay and $6 to $14 for decorative and stamped overlays, per ConcreteNetwork in 2026. A 600 sq ft deck comes to $2,400 to $4,800 for basic work and $3,600 to $8,400 stamped. Tearing out and re-pouring costs $8 to $24+ per sq ft.

Installed pool deck resurfacing and replacement prices per square foot, with the cost for a 600 sq ft deck
OptionInstalled price per sq ft600 sq ft deckSourceDate
Concrete pool deck resurfacing (general)$3 to $12$1,800 to $7,200HomeGuideUpdated Dec 22, 2025
Basic resurfacing (texture or thin overlay)$4 to $8$2,400 to $4,800ConcreteNetworkUpdated Feb 13, 2026
New texture on an existing deck, Arizona (incl. removing old surface $1.30 to $2.00)$6.30 to $12.00$3,780 to $7,200Shasta Pools (Arizona builder)2025
Decorative overlay$6 to $12+$3,600 to $7,200+ConcreteNetworkUpdated Feb 13, 2026
Stamped concrete overlay$6 to $14$3,600 to $8,400ConcreteNetworkUpdated June 4, 2026
Tear out and pour new concrete$8 to $24+ ($2 to $6 removal + $6 to $18+ new)$4,800 to $14,400+ConcreteNetworkUpdated Feb 13, 2026
Concrete pavers (new deck)$12 to $45$7,200 to $27,000ConcreteNetworkUpdated Feb 13, 2026
Travertine pavers, Phoenix (new deck)$20 to $34$12,000 to $20,400AE Outdoor LivingAccessed Oct 26, 2026

Sources: HomeGuide (Dec 22, 2025; saved copy accessed 2026-10-26); ConcreteNetwork pool deck cost (Feb 13, 2026); ConcreteNetwork stamped overlay (June 4, 2026); Shasta Pools; AE Outdoor Living (saved copy accessed 2026-10-26). 600 sq ft column: PC&S calculation. Download CSV

Pool deck resurfacing and replacement, installed price per square foot, 2025 to 2026US dollars per square foot; open-ended ranges (12+, 18+) drawn at their stated top figure
Pool deck resurfacing and replacement, installed price per square foot, 2025 to 2026Range chart: general resurfacing $3 to $12, basic resurfacing $4 to $8, Arizona texture on an old deck $6.30 to $12, decorative overlay $6 to $12, stamped overlay $6 to $14, tear-out and new concrete $8 to $24, concrete pavers $12 to $45, travertine in Phoenix $20 to $34.$0$12.5$25$37.5$50Resurfacing, general (HomeGuide): $3 to $12Resurfacing, general (HomeGuide)Basic resurfacing (ConcreteNetwork): $4 to $8Basic resurfacing (ConcreteNetwork)Texture on old deck, Arizona (Shasta): $6.3 to $12Texture on old deck, Arizona (Shasta)Decorative overlay: $6 to $12Decorative overlayStamped overlay: $6 to $14Stamped overlayTear out and new concrete: $8 to $24Tear out and new concreteConcrete pavers (new): $12 to $45Concrete pavers (new)Travertine, Phoenix (new): $20 to $34Travertine, Phoenix (new)

Source: ConcreteNetwork (Feb 13 and June 4, 2026); HomeGuide (Dec 22, 2025); Shasta Pools (Arizona, 2025); AE Outdoor Living (Phoenix). Download chart data (CSV)

Removal is the line that separates resurfacing from replacement. Shasta Pools, an Arizona builder, adds $1.30 to $2.00 per sq ft to take an old texture off before a new $5 to $10 finish, while ConcreteNetwork charges $2 to $6 per sq ft to remove the slab itself before $6 to $18+ of new concrete. ConcreteNetwork puts the average US pool deck at 900 sq ft; our 600 sq ft example is a smaller deck, so scale the totals by your measured area.

None of the 4 publishers in the table states a sample size, so the ranges mark the field, not a quote. Our sister guides cover the surface itself: pool deck materials compares slip, heat and freeze data, and pool deck contractors covers licensing and what to ask a bidder.

What do pool deck resurfacing materials cost?

Materials are the small part of a resurfacing bill. For 600 sq ft, a one-coat microtopping needs about $122 to $183 of product, a spray texture $195 to $275, a cool-deck splash $494.55 to $549.50, a stamped overlay at 1/4 in $1,025 to $1,230, and pavers set over the slab $2,550 to $3,724, by our math from October 2026 prices.

Materials math: maker coverage rate x seller price for a 600 sq ft pool deck, by resurfacing option
OptionProduct (maker)Coverage (maker data)Price (seller)Units for 600 sq ftMaterials for 600 sq ftMaterials per sq ft
Thin microtopping, one coatMicroTek 40 lb (SureCrete)200 to 300 sq ft per bag$61.00 (BDC Supply)2 to 3 bags$122 to $183$0.20 to $0.31
Spray texture or knockdownOne-Step Spray Deck 50 lb (SGM)150 to 225 sq ft per bag$65.00 (Pools & Surfaces)3 to 4 bags$195 to $260$0.33 to $0.43
Spray texture or knockdownSureSpray 50 lb (SureCrete)125 to 175 sq ft per bag$55.00 (BDC Supply)4 to 5 bags$220 to $275$0.37 to $0.46
Acrylic sealer, one coatSuper WB 5 gal (SureCrete)180 to 200 sq ft per gallon per coat$230 per 5 gal (BDC Supply)3.0 to 3.3 gal: 1 pail$230$0.38
Cool-deck splash textureKool Deck Elite 50 lb (Mortex)65 to 70 sq ft per bag$54.95 (DIY Pool Depot)9 to 10 bags$494.55 to $549.50$0.82 to $0.92
Roll-on acrylic deck coating, 2 coatsCOOL kit (Encore Coatings)200 sq ft per kit, 2 coats$259 (Encore)3 kits$777$1.30
Stamped overlay at 1/4 inSureStamp 50 lb (SureCrete)20 to 24 sq ft per bag at 1/4 in$41.00 (BDC Supply)25 to 30 bags$1,025 to $1,230$1.71 to $2.05
Travertine pavers over the slab, 1.25 inIvory Premium tumbled (Megastone USA)Sold per sq ft$4.85 per sq ft (tumbled range $4.25 to $4.95)600 sq ft$2,910$4.85
Porcelain pavers over the slab, 2 cmArterra (MSI), Versailles patternSold per sq ft, 8 sq ft boxes$5.79 per sq ft + $250 will-call (Carpet Floor & More)600 sq ft$3,724$6.21

PC&S calculation: bags = 600 / coverage, rounded up. Coverage: SureCrete MicroTek, SGM information sheet (Oct 2022), SureCrete SureSpray, SureCrete Super WB data sheet, Mortex instructions, Encore, SureCrete SureStamp. Prices: BDC Supply, Pools & Surfaces, DIY Pool Depot, Encore, Megastone USA, Carpet Floor & More. All accessed 2026-10-27. Download CSV

Materials cost to resurface a 600 sq ft pool deck, by option, October 2026US dollars, top of each range; maker coverage rates x seller prices; labor, primer, color packs and freight not included
Materials cost to resurface a 600 sq ft pool deck, by option, October 2026Bar chart of materials for 600 sq ft: porcelain pavers $3,724, travertine pavers $2,910, stamped overlay $1,230, acrylic coating kit $777, Kool Deck Elite $549.50, SureSpray $275, SGM Spray Deck $260, one sealer coat $230, microtopping $183.Porcelain pavers 2 cm: $3,724Porcelain pavers 2 cm$3,724Travertine pavers 1.25 in: $2,910Travertine pavers 1.25 in$2,910Stamped overlay 1/4 in: $1,230Stamped overlay 1/4 in$1,230Roll-on acrylic coating: $777Roll-on acrylic coating$777Kool Deck Elite splash: $550Kool Deck Elite splash$550SureSpray texture: $275SureSpray texture$275SGM One-Step Spray Deck: $260SGM One-Step Spray Deck$260Acrylic sealer, one coat: $230Acrylic sealer, one coat$230MicroTek microtopping, one coat: $183MicroTek microtopping, one coat$183

Source: PC&S calculation from SureCrete, SGM, Mortex, Encore, Megastone USA and MSI product data with BDC Supply, Pools & Surfaces, DIY Pool Depot, Encore and Carpet Floor & More prices, accessed Oct 27, 2026. Download chart data (CSV)

Thickness explains most of the spread. A stamped overlay goes on at 1/4 to 3/8 in, so one 50 lb bag of SureStamp covers 20 to 24 sq ft, while a sprayed texture is a thin skin: one 50 lb bag of SGM One-Step covers 150 to 225 sq ft. The QUIKRETE Re-Cap data sheet shows the same physics in one product, below.

QUIKRETE Re-Cap data sheet: one 40 lb bag covers 65 sq ft at 1/16 in but 16 sq ft at 1/4 in, and it takes foot traffic after 8 hours. Crop of the QUIKRETE No. 1131 PDF, captured 2026-10-27.
QUIKRETE Re-Cap data sheet: one 40 lb bag covers 65 sq ft at 1/16 in but 16 sq ft at 1/4 in, and it takes foot traffic after 8 hours. Crop of the QUIKRETE No. 1131 PDF, captured 2026-10-27.

Which pool deck resurfacing option fits your deck?

Seven options cover most existing concrete decks: reseal, roll-on acrylic coating, spray texture or knockdown, cool-deck splash, microtopping, stamped overlay, and pavers or stone set over the slab. They differ by thickness, downtime and upkeep, from a sealer that needs a new coat every 18 to 24 months to pavers with a 15-year planning life.

Pool deck resurfacing options compared: materials, installed price, downtime, upkeep and DIY fit
OptionWhat goes on the slabMaterials per sq ftInstalled per sq ftFirst light foot trafficUpkeep or life (maker or agency)DIY-friendlySource
Seal onlyClear acrylic film, 1 to 2 coats$0.38 per coatNo published range24 h (Super WB)Film sealers: recoat every 18 to 24 monthsYes: roller or sprayerSureCrete; Brickform
Roll-on acrylic coatingTwo coats of a pigmented acrylic$1.30No published rangeNot statedEncore: guaranteed while you own the home (10 years commercial)YesEncore Coatings
Spray texture or knockdownCement-based texture sprayed with a hopper gun, then sealed$0.33 to $0.46$4 to $8 (basic resurfacing)24 h; vehicles 48 h (SGM)Seal with two thin coats of sealer (SGM)Hard: needs a hopper gun and compressorSGM; SureCrete; ConcreteNetwork
Cool-deck splashCement topping splashed with a brush and troweled$0.82 to $0.92No national range foundLight walking after 3 daysContains its own sealer; heavy furniture after 28 daysHard: dash brush, pattern blade, mixerMortex
Microtopping or resurfacerThin cement coat, 1/16 to 1/4 in$0.20 to $0.31 (MicroTek, 1 coat)$4 to $8 (basic resurfacing)8 h (Re-Cap)Old cracks can reappear (QUIKRETE)Yes: squeegee or trowelSureCrete; QUIKRETE
Stamped overlay1/4 to 3/8 in stampable topping, stamped and sealed$1.71 to $2.05$6 to $1424 h after sealing (Brickform SC-60)Reseal every 2 to 5 years (ConcreteNetwork)Hard: stamp mats, release, timingSureCrete; Brickform; ConcreteNetwork
Pavers or stone over the slab1.25 in travertine or 2 cm porcelain set over the slab$4.25 to $6.21$20 to $34 travertine, PhoenixDepends on setting bedHUD: pool deck useful life 15 yearsModerate: cuts, height at coping and doorsMegastone; Carpet Floor & More; AE Outdoor Living; HUD

Sources: SureCrete; Brickform; Encore; SGM; Mortex; QUIKRETE; Brickform SC-60; ConcreteNetwork; ConcreteNetwork; Megastone USA; Carpet Floor & More; AE Outdoor Living; HUD CNA e-Tool. Download CSV

Coatings over coatings need care. Encore sells its $259 COOL kit, enough for 200 sq ft, to resurface bare concrete or an existing Kool Deck surface, and the SureCrete Super WB data sheet says to test a small area before recoating an unknown sealer. Mortex writes that a Kool Deck Elite surface contains its own sealer and curing agents, so no further surface work is required. Mortex also warns that its own deck paint makes a Kool Deck surface hotter and slicker, one of the recoat rules in our cool deck guide.

Pavers and porcelain add height. Megastone sells its tumbled travertine pavers in 1.25 in and 2 in thicknesses (Megastone USA), and MSI Arterra porcelain pavers are 2 cm thick (Carpet Floor & More), before any setting bed. Check the finished height against the coping, door thresholds and deck drains before pricing either. HUD plans on 15 years of useful life for a pool deck in its capital needs table.

How long does a resurfaced pool deck take to cure?

Most thin coatings take foot traffic in 8 to 24 hours: QUIKRETE Re-Cap in 8 hours, SGM One-Step Spray Deck the next day. Sealers allow heavy traffic after 72 hours. A Mortex Kool Deck Elite topping is the slowest: no contact for 48 hours, light walking after 3 days and heavy patio furniture after 28 days.

Days before light walking and before vehicles, heavy traffic or furniture, as each maker states it. QUIKRETE, SGM, SureCrete, Brickform and Mortex data, accessed 2026-10-27.
Days before light walking and before vehicles, heavy traffic or furniture, as each maker states it. QUIKRETE, SGM, SureCrete, Brickform and Mortex data, accessed 2026-10-27.
Cure and downtime after resurfacing, by product, from maker data sheets
ProductFirst light foot trafficVehicles, heavy traffic or furnitureOther timingSource
QUIKRETE Re-Cap resurfacer8 hoursDrive on in 24 hoursSecond coat within 24 hours of the firstQUIKRETE data sheet No. 1131
SGM One-Step Spray DeckNext day (24 hours)Vehicles 48 hours (2 days)Minimum cure 8 hours; base concrete cured 7 days firstSGM information sheet, Oct 2022
SureCrete SureSprayNot statedNot statedReady for sealer in about 2 to 6 hoursSureCrete product page
SureCrete SureStampNot statedNot statedReady for stain or sealer in about 6 to 8 hoursSureCrete product page
SureCrete Super WB sealer24 hours (light duty)Heavy traffic 72 hoursRecoat after 24 hoursSureCrete specs via BDC Supply
Brickform SC-60 stampable overlay24 hours after sealingVehicles 5 daysApply at 50 to 85FBrickform SC-60 TIS
Mortex Kool Deck EliteNo contact 48 hours; light walking 3 daysHeavy patio furniture 28 daysNormal walking after 14 daysMortex instructions

Sources: QUIKRETE No. 1131; SGM information sheet; SureCrete SureSpray; SureCrete SureStamp; SureCrete Super WB specs; Brickform SC-60 TIS; Mortex. Accessed 2026-10-27. Download CSV

Plan the pool around the deck. If the interior is also due, do the deck first or protect it, since our pool resurfacing cost guide shows a plaster start-up runs 28 days of daily water care; overlapping crews on the same 28 days slows both jobs.

Is a resurfaced pool deck slip resistant?

It can be, but the code number is often misquoted. ISPSC 306.2 requires slip-resistant, cleanable decks and applies a wet DCOF of 0.42 only where a surface is evaluated. ANSI A326.3 sets 0.42 for level interior floors and gives no value for pool decks. On coated decks, the sealer and any grit decide most of the grip.

Pool deck slip resistance: common claims vs what the code and the standard say
Claim you will seeWhat the source text saysSource
"The pool code requires a wet DCOF of 0.42"Decks must be slip resistant and cleanable. Only where surfaces are evaluated must they reach DCOF 0.42 wet (ANSI A326) or pendulum P4; the design professional sets the level.ISPSC 2024, Section 306.2
"0.42 is the safe number for pool decks"The 0.42 wet DCOF applies to hard surface flooring for level interior spaces walked on when wet. The standard gives no single DCOF value for pool decks.ANSI A326.3-2021, Section 3.1 and informative note
"Outdoor tile needs 0.55"For exterior wet areas, a minimum wet DCOF of 0.55 is described as generally accepted, with drainage and structure also considered.ANSI A326.3-2021, informative note
"A sealer makes it safer"Slip resistance of overlays depends largely on the sealer; film sealers can get slick when wet unless grit is added.ConcreteNetwork (June 2026); Brickform
Grit additive dose1 quart of SureGrip per 5 gallon pail of sealer; $22 per quart.SureCrete specs via BDC Supply
DrainageDecks slope away from the pool or to deck drains; minimum 1/8 in per ft for textured concrete, maximum 1/2 in per ft.ISPSC 2024, Sections 306.5 and 306.5.1

Sources: ISPSC 2024 Sections 306.2 and 306.5 via UpCodes; ANSI A326.3-2021 (TCNA); ConcreteNetwork; Brickform; SureGrip via BDC Supply. Saved copies of the code and standard accessed 2026-10-26; others 2026-10-27. Download CSV

Ask the bidder which sealer goes on last and whether grit is mixed in. SureCrete doses its SureGrip additive at 1 quart per 5 gallon pail of sealer, about $22 a quart at BDC Supply, and Brickform says to broadcast grit into the first coat of a film sealer while it is tacky. Falls on decks are easy to miss in injury data, as our pool injury statistics explain.

Get pool deck resurfacing quotes

Can I resurface my pool deck myself?

Yes for roll-on coatings, sealers and squeegee resurfacers; harder for sprayed textures, cool-deck splash and stamped overlays, which need a hopper gun, dash brush or stamp mats and tight timing. On a 600 sq ft deck, DIY spray texture materials plus one sealer coat run $425 to $505 against $2,400 to $4,800 installed.

DIY materials vs installed price for a 600 sq ft pool deck, with the tools each maker names
OptionDIY materials, 600 sq ftInstalled, 600 sq ftTools the maker names
Roll-on acrylic coating$777 (3 Encore kits)No published rangeMixing pail and roller (kit)
Spray texture plus one sealer coat$425 to $505 (SGM or SureSpray + $230 Super WB)$2,400 to $4,800 (basic resurfacing)Hopper gun at a 1/4 in setting (SureCrete)
Cool-deck splash$494.55 to $549.50 (9 to 10 bags)No national range foundDash brush (DIY Pool Depot); steel trowels, Mortex pattern blade, paddle mixer, viscosity cup (Mortex)
Stamped overlay plus one sealer coat$1,255 to $1,460$3,600 to $8,400Stamp mats and release agent (SureCrete)

Sources: PC&S materials math above; ConcreteNetwork; ConcreteNetwork; SureCrete; Mortex; Encore. Download CSV

  1. Check the slabOverlays bond only to sound concrete; heaving or through-cracks mean replacement, not resurfacing (ConcreteNetwork).
  2. Clean and profileAny surface receiving a cement-based coating must be clean, cured, sound and profiled (SureCrete); SGM calls for acid etching, neutralizing and rinsing.
  3. Check the weatherStay inside the product window: 50F to 100F for SGM Spray Deck, 50F to 90F for Super WB, no frost within 24 hours.
  4. Mix by the bagSGM: about 4 quarts of water per 50 lb bag, mixed on slow speed, used within 30 minutes.
  5. Apply and textureSpray to cover about 75% of the surface for a knockdown (SGM); keep each Re-Cap layer at 1/4 in or less.
  6. SealTwo thin coats of sealer (SGM); add 1 quart of grit per 5 gallon pail where bare feet will be wet.
  7. Stay offFoot traffic after 24 hours for SGM Spray Deck; heavy traffic after 72 hours on Super WB sealer; heavy furniture after 28 days on Kool Deck Elite.

What time of year is best to resurface a pool deck?

Spring or fall in hot climates, and any dry stretch above about 50F elsewhere. Makers set application windows: 50F to 100F for SGM One-Step Spray Deck, 50F to 90F for SureCrete Super WB and 50F to 85F for Brickform SC-60. Phoenix normal highs peak at 106.9F in early July, above every window here.

Application temperature windows for pool deck coatings, overlays and sealers
ProductApply when air and surface areOther limitSource
SGM One-Step Spray Deck50F to 100FNo frost expected within 24 hoursSGM information sheet, Oct 2022
SGM Color Guard sealer55F to 90FCovers 250 to 300 sq ft per gallonSGM product page
SureCrete Super WB sealer50F to 90FSubstrate dry throughoutSureCrete Super WB data sheet
Brickform SC-60 stampable overlay50F to 85FSlab moisture under 5 lb per 1,000 sq ft per 24 hBrickform SC-60 TIS
QUIKRETE Re-CapFollow ACI 305R in hot weatherInsulate if temperatures may fall below 32FQUIKRETE data sheet No. 1131

Sources: SGM; SGM Color Guard; SureCrete Super WB; Brickform SC-60; QUIKRETE. Accessed 2026-10-27. Download CSV

Pair the window with your swim season. Our pool season length study counts NOAA 1991 to 2020 normals for 60 metros, including the 106.9F Phoenix peak on July 4. A deck done in the shoulder season is cured before the pool opens, and crews are not competing with summer pool openings.

Should you resurface or replace your pool deck?

Resurface when the slab is sound and drains away from the pool; replace it when it has heaved, settled, cracked through or slopes toward the water. ISPSC 306.5.1 requires decks to drain away from the pool or to deck drains, and no overlay fixes slope. Resurfacing runs $4 to $14 per sq ft; replacement $8 to $24+. Before any overlay, sort the cracks by type and width with our pool deck crack repair guide, since moving cracks need a flexible sealant first.

Decision table: which pool deck resurfacing path fits your situation
If your situation isDo thisPrice and rule behind it
The slab is heaved, settled, cracked through or drains toward the poolReplace the slab$2 to $6 removal + $6 to $18+ new per sq ft (ConcreteNetwork); ISPSC 306.5.1 requires slope away from the pool or to drains
The finish is intact, only faded or stainedClean and reseal$230 of Super WB per 600 sq ft coat; film sealers every 18 to 24 months (Brickform)
Bare concrete or old Kool Deck, you want a cooler painted finish yourselfRoll-on acrylic coating$259 per 200 sq ft kit; Encore says it covers bare concrete or existing Kool Deck
Sound slab, hairline cracks, you want grip and a new colorSpray texture or knockdown, then seal$4 to $8 installed (ConcreteNetwork); materials $0.33 to $0.46 per sq ft
Sound slab, you want a stone or tile patternStamped overlay$6 to $14 installed (ConcreteNetwork); 25 to 30 SureStamp bags per 600 sq ft at 1/4 in
You want real stone and can raise the surface about 1.25 inPavers over the slab$4.25 to $4.95 per sq ft travertine (Megastone); check heights at coping, doors and drains
It is July in PhoenixSchedule spring or fallNormal highs peak at 106.9F; SGM Spray Deck tops out at 100F, Super WB at 90F
The pool itself is coming outPrice removal first, then resurface the slab as a patioSee the pool removal cost guide

Sources: ConcreteNetwork; ConcreteNetwork; ISPSC 2024; Brickform; Encore; SureCrete; Megastone USA; SGM; NOAA normals via PC&S research. Download CSV

Resurface, coat or replace: the same thresholds as the decision table, with ConcreteNetwork prices and the ISPSC 306.5.1 drainage rule.
Resurface, coat or replace: the same thresholds as the decision table, with ConcreteNetwork prices and the ISPSC 306.5.1 drainage rule.

A 600 sq ft re-pour at $8 to $24+ per sq ft may need a permit and inspection where a resurfacing coat does not; our pool permit guide lists what cities inspect. If the pool is coming out instead, start with our pool removal cost guide, since the old deck often stays as a patio and can be resurfaced with the same options. Bundling deck work with other repairs is covered on our pool remodeling page.

How we compiled this

We read 27 documents in October 2026: data sheets and product pages from QUIKRETE, SGM, SureCrete, Mortex, Brickform, Encore and Megastone USA; seller prices from BDC Supply, Pools & Surfaces, DIY Pool Depot, Encore and Carpet Floor & More; the 2024 ISPSC deck section, ANSI A326.3-2021 and HUD’s useful life table; and cost pages from ConcreteNetwork, HomeGuide, Shasta Pools and AE Outdoor Living. The materials math multiplies maker coverage by seller price for a 600 sq ft example; we did not apply any product or collect contractor quotes.

Frequently Asked Questions

How much does it cost to resurface a pool deck?

About $4 to $8 per sq ft for basic resurfacing and $6 to $14 for decorative or stamped overlays (ConcreteNetwork, 2026). For a 600 sq ft deck that is $2,400 to $4,800 basic and $3,600 to $8,400 stamped. HomeGuide gives $3 to $12 per sq ft for concrete pool deck resurfacing.

Can I resurface my pool deck myself?

Yes for roll-on coatings, sealers and squeegee resurfacers. An Encore COOL kit costs $259 and covers 200 sq ft in two coats, and QUIKRETE Re-Cap takes foot traffic after 8 hours. Sprayed knockdown needs a hopper gun, and Kool Deck Elite is splashed on with a dash brush (DIY Pool Depot) and finished with the Mortex pattern blade and steel trowels.

What is the best pool deck resurfacing material?

For a sound slab, a sprayed or troweled cement texture sealed with grit gives the most grip per dollar: $4 to $8 per sq ft installed (ConcreteNetwork). Choose a stamped overlay ($6 to $14) for a stone look, and pavers over the slab when you want natural stone and can absorb about 1.25 in of added height.

What time of year is best to resurface a pool?

For the deck, a dry week inside the product’s temperature window: 50F to 100F for SGM One-Step Spray Deck and 50F to 90F for SureCrete Super WB sealer (SGM). In Phoenix, where normal highs peak at 106.9F in early July, that means spring or fall, finished before the pool opens.

Can a concrete pool deck be resurfaced?

Yes, if the slab is sound and drains away from the pool. ConcreteNetwork says resurfacing depends on the existing deck being a good candidate. A deck that has heaved or slopes toward the water breaks ISPSC 306.5.1 and needs replacement, at $2 to $6 per sq ft to remove plus $6 to $18+ new (ConcreteNetwork).

How much does Kool Deck cost?

Materials run about $0.82 to $0.92 per sq ft: a 50 lb bag of Mortex Kool Deck Elite costs $54.95 at DIY Pool Depot and covers 65 to 70 sq ft, so a 600 sq ft deck needs 9 to 10 bags. Color packs are extra, and heavy furniture stays off for 28 days.

Sources

  1. ConcreteNetwork.com. Concrete Pool Deck Cost (updated Feb 13, 2026). Accessed 2026-10-27.
  2. ConcreteNetwork.com. Stamped Concrete Overlays (updated June 4, 2026). Accessed 2026-10-27.
  3. HomeGuide. How Much Does a Pool Deck Cost? (updated Dec 22, 2025), saved copy. Accessed 2026-10-26.
  4. Shasta Pools. How Much Does Pool Deck Resurfacing Cost in Arizona?. Accessed 2026-10-27.
  5. AE Outdoor Living. Concrete vs Pavers vs Travertine Pool Deck, saved copy. Accessed 2026-10-26.
  6. SGM, Inc.. One Step Spray Deck Information Sheet (Oct 2022). Accessed 2026-10-27.
  7. SGM, Inc.. Southcrete Color Guard Stain Sealer. Accessed 2026-10-27.
  8. Pools & Surfaces. SGM One-Step Spray Deck System 50 lb bag. Accessed 2026-10-27.
  9. SureCrete. SureSpray sprayable concrete overlay. Accessed 2026-10-27.
  10. SureCrete. SureStamp stamp concrete overlay. Accessed 2026-10-27.
  11. SureCrete. Super WB data sheet. Accessed 2026-10-27.
  12. BDC Supply. SureSpray, SureStamp, MicroTek, Super WB and SureGrip product listings. Accessed 2026-10-27.
  13. Mortex Manufacturing. Kool Deck Elite instructions. Accessed 2026-10-27.
  14. DIY Pool Depot. Mortex Kool Deck Elite 50 lb. Accessed 2026-10-27.
  15. Encore Coatings. COOL Pool Deck Coating kit. Accessed 2026-10-27.
  16. QUIKRETE. Re-Cap Concrete Resurfacer data sheet, No. 1131. Accessed 2026-10-27.
  17. Brickform. SC-60 Stampable Overlay technical information sheet. Accessed 2026-10-27.
  18. Brickform. Concrete Pool Deck Sealers for Slip Resistance and Protection. Accessed 2026-10-27.
  19. Megastone USA. Ivory Premium Tumbled Travertine Pavers. Accessed 2026-10-27.
  20. Carpet Floor & More. Arterra Porcelain Pavers, 2 cm. Accessed 2026-10-27.
  21. International Code Council via UpCodes. International Swimming Pool and Spa Code 2024, Section 306 (Austin adoption), saved copy. Accessed 2026-10-26.
  22. Tile Council of North America. ANSI A326.3-2021 (released February 2022), saved copy. Accessed 2026-10-26.
  23. U.S. Department of Housing and Urban Development. CNA e-Tool Estimated Useful Life Table. Accessed 2026-10-27.
  24. PC&S research. Pool Season Length by City. Accessed 2026-10-27.
  25. PC&S research. Pool Injury Statistics. Accessed 2026-10-27.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.