Skip to content
Pale textured concrete deck around a backyard pool in bright sun
Guide: cool pool deck coatings

Cool Deck for Pools: What It Is, Product Specs, Colors, Repair and Cost

Cool deck is a light, textured cement or acrylic topping applied no thicker than 1/8 to 5/32 inch over a concrete pool deck to keep it cooler underfoot; Mortex introduced the original, Keystone Kool Deck, in 1962.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓Data sheets, not adjectivesMortex, Miracote, SGM, Sundek and Encore specs side by side, with the tests each one does or does not publish.
  • ✓The paint warningMortex says its own deck paint makes Kool Deck hotter and slicker; see what it recommends instead.
  • ✓Priced for a 448 sq ft deck$1,792 to $3,584 installed vs $5,376 to $20,160 for pavers (2026 rates).
Quick answer
Cool deck is a textured topping over concrete, not a paint: Mortex’s Keystone Kool Deck goes on no thicker than 1/8 in. Installed resurfacing runs $4 to $8 per sq ft (ConcreteNetwork, February 2026). Kool Deck Elite material costs $54.95 per 50 lb bag covering 65 to 70 sq ft (DIY Pool Depot, November 2026).
$4 to $8 per sq ft
Installed, basic resurfacing
$54.95 per 50 lb
Kool Deck Elite bag
1/8 in or less
Thickness, Keystone Kool Deck
Source: Mortex
28 days
Heavy furniture after

Key takeaways

  • Cool deck is a textured topping, not a paint: Mortex introduced Keystone Kool Deck in 1962, and its instructions call for a finished surface no more than 1/8 in thick, about 40% smooth and 60% void.
  • No maker we read publishes a measured deck temperature. Mortex says Kool Deck significantly lowers the surface temperature of concrete; Encore Coatings claims up to 38% less heat build-up. The only per-color numbers are Miracote SRI values: Sandpiper Beige goes from SRI 46 to 69 in its solar-reflective version.
  • Mortex’s own Systex Deck Paint page says the paint does NOT provide cooling and makes a Kool Deck surface hotter and slicker; for protection Mortex sells Protect-A-Deck, a clear siloxane rated for 5 to 10 years of water repellency.
  • A 2001 Mortex ASTM sheet reports 2,500 psi at 28 days (ASTM C109) and, under ASTM C666 freeze-thaw cycling, that Kool Deck flats start to fail at 70 cycles.
  • Basic resurfacing runs $4 to $8 per sq ft installed (ConcreteNetwork, February 2026): $1,792 to $3,584 for a 448 sq ft deck around a 16 x 32 ft pool, against $5,376 to $20,160 for concrete pavers.

What is cool deck?

Cool deck is a light-colored, textured topping applied over a concrete pool deck so it stays more comfortable under bare feet than plain concrete. The original, Keystone Kool Deck, is a cement-based topping Mortex introduced in Tucson in 1962. Today “cool deck” also covers acrylic spray textures and roll-on coatings from other makers.

Kool Deck is a trademark; cool deck is the generic term. Mortex mixes one unit of Keystone Kool Deck with a 94 lb bag of white cement, 10 gallons of 20 mesh marble sand and 8 gallons of water, splashes it on twice with a dash brush and trowels the peaks flat (Mortex instructions). Its newer Kool Deck Elite comes premixed in 50 lb bags with a separate 1 to 1.5 lb Color-Unit pack and covers 65 to 70 sq ft per bag (Kool Deck Elite instructions).

Cool deck: key numbers with source and date
NumberValueSource
Year Mortex introduced Keystone Kool Deck1962Mortex
Keystone Kool Deck finished thickness1/8 in or lessMortex instructions
Kool Deck Elite coverage per 50 lb bag65 to 70 sq ft; 5/32 in or lessMortex Kool Deck Elite instructions
Finished textureAbout 40% smooth, 60% voidMortex instructions
Kool Deck compressive strength at 28 days (ASTM C109)2,500 psiMortex ASTM sheet (2001)
Kool Deck freeze-thaw (ASTM C666)Flats start to fail at 70 cyclesMortex ASTM sheet (2001)
Heavy furniture back on a new Kool Deck Elite surfaceAfter 28 daysMortex Kool Deck Elite instructions
Basic pool deck resurfacing, installed$4 to $8 per sq ftConcreteNetwork (Feb 13, 2026)
Kool Deck Elite material$54.95 per 50 lb bagDIY Pool Depot (Nov 2, 2026)

Sources: Mortex Keystone Kool Deck and Kool Deck Elite instructions; Mortex ASTM sheet (2001); ConcreteNetwork (Feb 13, 2026); DIY Pool Depot (Nov 2, 2026). Download CSV

The texture is the point. Mortex tells installers to leave about 40% of the finished deck smooth and 60% void so the knolls can expand and contract without craze cracking, and the best Keystone surface is no more than 1/8 in thick (Elite: 5/32 in). Sundek, a concrete coatings company, uses the same term for its acrylic Classic Texture and notes on its page that this is not Kool Deck. For how a cool deck sits against the pool edge, see our pool coping guide.

Is cool deck a paint?

The original is not: Keystone Kool Deck is a cement topping that Mortex says becomes a colored, textured surface as strong as the base concrete. ConcreteNetwork makes the same point about spray-applied cool deck overlays. Roll-on products sold as “cool deck paint”, such as Encore COOL at $259 per 200 sq ft kit, are acrylic coatings.

Cool deck products compared from maker data sheets: what each is, coverage, cure, heat claim and published test data
Product (maker)What it isThickness or coverageTraffic and cureHeat claim in the maker's textPublished test dataSource
Keystone Kool Deck (Mortex)Cement topping: 1 unit + 94 lb white cement + 10 gal marble sand + 8 gal water, splashed and troweled300 sq ft per unit minimum; 1/8 in or lessGeneral use after about 21 daysSignificantly lowers the surface temperature of concrete (no number)C109: 2,500 psi at 28 days; C666: flats start to fail at 70 cycles; C944 abrasion under 1 g at 2 kg (2001 sheet)Mortex
Kool Deck Elite (Mortex)Premixed white 50 lb bag plus one Color-Unit pack65 to 70 sq ft per bag; 5/32 in or lessNo contact 48 h; light walking 3 days; furniture 28 daysStays cooler than plain concrete (no number)None publishedMortex
Designer Colors (Mortex)Kool Deck formula in deeper colorsAs Kool DeckAs Kool DeckWarmer to the touch than Kool Deck surfacesNone publishedMortex
Classic Texture (Sundek)Acrylic spray texture coatingNot published on the pageNot published on the pageCool-to-the-touch; majority of colors meet LEED SRI (no values shown)Lab tested, values not publishedSundek
One-Step Spray Deck (SGM)Pre-blended cement and dry resin spray texture150 to 225 sq ft per 50 lb bag; 1/4 in maxFoot traffic 24 h; vehicles 48 hNoneSays independently tested; no valuesSGM (Oct 2022 sheet)
COOL kit (Encore Coatings)Roll-on acrylic coating tinted with 1 gal of acrylic paint200 sq ft per kit in 2 coatsDries in minutes (no traffic time stated)Reduces heat build-up by up to 38%No test method publishedEncore Coatings
MiraGard Colorbond SR (Miracote)Solar-reflective acrylic topcoat300 to 320 sq ft per gal per coat; 2 coatsRecoat 1 h; traffic 4 hSignificantly cooler surfaceSRI by color, e.g. Sandpiper Beige 46 standard vs 69 SRMiracote (2012 sheet)

Sources: Mortex Keystone Kool Deck, Kool Deck Elite, Designer Colors and ASTM sheet; Sundek; SGM One-Step information sheet (Oct 2022); Encore Coatings (Nov 2026); Miracote Colorbond SR data sheet (2012). Download CSV

A light knockdown texture on a pool deck. Mortex specifies about 40% smooth and 60% void for Kool Deck; SGM's One-Step spray texture goes on no thicker than 1/4 in and covers 150 to 225 sq ft per 50 lb bag (October 2022 sheet).
A light knockdown texture on a pool deck. Mortex specifies about 40% smooth and 60% void for Kool Deck; SGM’s One-Step spray texture goes on no thicker than 1/4 in and covers 150 to 225 sq ft per 50 lb bag (October 2022 sheet).

ConcreteNetwork answers the question directly: cool deck coatings are not a concrete pool deck paint but spray-applied overlays in light colors with an orange peel texture (ConcreteNetwork, March 2021). SGM’s One-Step Spray Deck, for example, is a pre-blended cement and dry resin texture that takes foot traffic after 24 hours (SGM). Paint-like products are thinner: Encore sells COOL as a roll-on coating at 400 sq ft per coat, two coats per kit.

How much cooler is cool deck than concrete?

No maker or independent lab we found publishes a measured pool deck temperature for Kool Deck. Makers state it qualitatively, or as a percentage without a method. The measured numbers that exist are reflectance values: Miracote’s solar-reflective acrylic raises SRI by 10 to 36 points over its standard version in the same color, and the EPA measured cool pavements 10 to 16F cooler than asphalt.

Solar reflectance index of one acrylic deck coating, standard vs solar-reflective, by color (Miracote, 2012)SRI, higher is cooler in sun; left end = Colorbond XL, right end = Colorbond SR, same color name
Solar reflectance index of one acrylic deck coating, standard vs solar-reflective, by color (Miracote, 2012)Range chart: switching the same color from Miracote's standard to its solar-reflective coating raises SRI by 10 to 36 points, for example Sandpiper Beige from 46 to 69, Toffee from 20 to 56 and White from 70 to 80.020406080White (70 to 80): 70 to 80White (70 to 80)Sandpiper Beige (46 to 69): 46 to 69Sandpiper Beige (46 to 69)Provincial Tan (43 to 66): 43 to 66Provincial Tan (43 to 66)Speedway Gray (36 to 65): 36 to 65Speedway Gray (36 to 65)Dodge City Tan (32 to 58): 32 to 58Dodge City Tan (32 to 58)Toffee (20 to 56): 20 to 56Toffee (20 to 56)Dolphin Gray (29 to 56): 29 to 56Dolphin Gray (29 to 56)Copper Kettle (23 to 50): 23 to 50Copper Kettle (23 to 50)Bright Gray (17 to 49): 17 to 49Bright Gray (17 to 49)Adobe (14 to 46): 14 to 46Adobe (14 to 46)

Source: Miracote MiraGard Colorbond SR technical data sheet, Rev 02-07-2012, SRI comparison table. Download chart data (CSV)

Solar reflectance index (SRI) of Miracote Colorbond XL vs Colorbond SR, same color names
ColorColorbond XL (standard) SRIColorbond SR (solar reflective) SRIDifference
White708010
Sandpiper Beige466923
Provincial Tan436623
Speedway Gray366529
Dodge City Tan325826
Toffee205636
Dolphin Gray295627
Copper Kettle235027
Bright Gray174932
Adobe144632

Source: Miracote MiraGard Colorbond SR technical data sheet, Rev 02-07-2012, SRI comparison table. Maker data; ask for the current sheet. Download CSV

Several popular pages repeat that Kool Deck runs about 20 degrees cooler than concrete; Rosie on the House states it without a test. Mortex itself writes only that Kool Deck significantly lowers the surface temperature of concrete, and that darker colors are warmer than lighter ones (Mortex brochure). Encore’s up to 38% figure carries a disclaimer about environmental anomalies and no test method.

For scale, the EPA puts conventional pavements at 120 to 150F in summer, and its Arizona pilot measured asphalt at 152F mid-day with cool pavements 10 to 16F cooler (EPA). Color drives most of the difference, which is why the SRI numbers matter more than the product name. Our pool deck materials guide compares reflectance across pavers and colored concrete.

What cool deck colors are available for pools?

Kool Deck comes in 8 standard colors from Sedona Tan to Birch Grey, plus 3 darker Designer Colors that Mortex says are warmer to the touch. Roll-on coatings can be tinted almost any color. For a cool surface, pick the lightest shade you can live with: in Miracote’s table, White scores SRI 80 and Adobe 46 in the same solar-reflective coating.

Cool deck colors for pools by product line, with each maker's note on heat
Product lineColors named by the makerMaker's note on heatSource
Keystone Kool Deck and Kool Deck EliteSedona Tan, Adobe Buff, Aztec Gold, Sand Buff, Rose Pink, Coral Peach, Aqua, Birch GreyDarker colors are warmer than lighter Kool Deck colorsMortex brochure
Mortex Designer ColorsMauve, T5, Terra CottaWarmer to the touch than Kool Deck surfacesMortex Designer Colors page
Encore COOLAny color, by adding 1 gal of mid-grade acrylic paintAvoid dark earth tones and grays that contain black pigmentEncore Coatings
Miracote Colorbond SR10 colors from White to AdobeSRI from 46 (Adobe) to 80 (White)Miracote data sheet (2012)
Sundek coatingsCustom colorsLighter colors retain less heat; most colors lab-tested for SRISundek

Sources: Mortex Kool Deck brochure; Mortex Designer Colors; Encore Coatings; Miracote (2012); Sundek. Download CSV

Encore lets owners tint a COOL kit with one gallon of mid-grade acrylic paint but warns that darker earth tones and grays can contain black pigments that work against a cool surface (Encore). Mortex adds that Designer Colors, its Mauve, T5 and Terra Cotta range, are warmer to the touch than standard Kool Deck. Rosie on the House, an Arizona home improvement radio show, adds that Kool Deck fades in the Arizona sun and patches are hard to color-match.

How is cool deck applied over existing concrete?

Mortex’s existing-concrete method has seven steps: strip old toppings, acid etch, rinse, brush on its PTA bonding agent, splash the topping twice, trowel, then cover with plastic for two days. It recommends a trained crew of 4 to 5 people and an air temperature of 50F and rising, no higher than 90F. New concrete gets the topping the day it is poured.

  1. Strip and repairRemove old toppings with a scarifier and a 3,000 psi pressure washer; repair major cracks well in advance. The system bonds only to cementitious surfaces, not brick, tile or stone (Mortex).
  2. Acid etchWet the deck, then scrub with muriatic acid mixed 1 part acid to 1 part water on old concrete, 1 to 4 on new. Do not neutralize with TSP: Mortex says it leaves a film that breaks the bond.
  3. Rinse twicePressure wash with the nozzle 3 to 4 in off the deck, then again at about 1 ft.
  4. Bond coatApply PTA Bonding Agent; one carton covers about 350 sq ft.
  5. Splash twiceMix to a thin, milky consistency (a Mortex viscosity cup empties in 17 seconds for Elite), splash to cover, then resplash for high peaks.
  6. TrowelKnock down the peaks flat with a light hand, leaving about 40% smooth and 60% void.
  7. Cover and cureCover with plastic for two days. In freeze-thaw climates protect the finish from frost for 28 days.
Cool deck cure and downtime by product, from maker instructions
Product or jobKeep offLight walkingNormal useFurniture or vehiclesSource
Kool Deck Elite, new48 hours3 days14 daysHeavy furniture 28 daysMortex Kool Deck Elite instructions
Kool Deck, care sheetLimit contact 48 hoursRestrict even light use 1 weekWalking after 2 weeksNo furniture or hard shoes for 4 weeksMortex Care and Cleaning sheet
Keystone Kool Deck, fresh concreteGeneral use about 21 daysMortex Keystone Kool Deck instructions
Kool Deck on existing concretePlastic cover 2 daysProtect from frost 28 days in freeze-thaw climatesMortex existing-concrete instructions
Kool Deck Repair Kit patchPlastic exactly 2 daysWash often for 6 weeksMortex Repair Kit instructions
SGM One-Step Spray DeckMinimum cure 8 hoursNext day (24 hours)Vehicles 48 hoursSGM (Oct 2022)
Miracote Colorbond SR topcoatDry to touch 20 to 30 minOpen to traffic 4 hoursMiracote (2012)
Protect-A-Deck sealerDeck at least 28 days old first3 rain-free days for full repellencyMortex Protect-A-Deck instructions

Sources: Mortex Kool Deck Elite, Care and Cleaning, Keystone, existing concrete, Repair Kit and Protect-A-Deck instructions; SGM (Oct 2022); Miracote (2012). Download CSV

Days until each use is allowed on a new Kool Deck Elite surface (48 hours, 3, 14 and 28 days), with Mortex's stricter care sheet (1 week, 2 weeks, 4 weeks) and SGM's 24 and 48 hour spray deck times.
Days until each use is allowed on a new Kool Deck Elite surface (48 hours, 3, 14 and 28 days), with Mortex’s stricter care sheet (1 week, 2 weeks, 4 weeks) and SGM’s 24 and 48 hour spray deck times.

Mortex’s documents disagree on light walking: the Elite instructions allow it after 3 days, while the care sheet restricts even light use for one week. Use the stricter number. Rosie on the House says Kool Deck must go on freshly poured concrete to bond; Mortex publishes the PTA method above for existing concrete. Mortex’s 90F ceiling rules out Phoenix summers, where normal highs peak at 106.9F on July 4, per our pool season length study.

Get cool deck quotes

Can you paint, seal or recoat cool deck?

You can, but the maker’s own paint costs you the cooling. Mortex says its Systex Deck Paint does not provide cooling properties and turns a Kool Deck surface hotter and slicker. To protect an existing cool deck without changing color or texture, Mortex sells Protect-A-Deck, a clear siloxane; to change color, Encore sells COOL for use over Kool Deck at $259 per 200 sq ft.

Mortex's Systex Deck Paint page: rollable acrylic, two coats two hours apart, and a warning that it does NOT provide cooling properties and makes Kool Deck hotter and slicker. Screenshot of mortex.com, captured November 2, 2026.
Mortex’s Systex Deck Paint page: rollable acrylic, two coats two hours apart, and a warning that it does NOT provide cooling properties and makes Kool Deck hotter and slicker. Screenshot of mortex.com, captured November 2, 2026.
Recoat, seal and clean options for an existing cool deck, with what each maker says
OptionWhat the maker says about cool deckCoverage and limitsPriceSource
Mortex Systex Deck PaintDoes NOT provide cooling properties; a Kool Deck surface becomes hotter and slickerTwo coats one day, 2 hours apartNot listedMortex
Mortex Protect-A-Deck (clear siloxane)Can be used on Keystone Kool Deck; does not change color or textureMix 1:15 with water; 1,600 to 2,400 sq ft per gal of mix; 2 to 3 coats; 40F to 95F; 5 to 10 years of water repellencyNot listedMortex
Encore COOL kit (roll-on acrylic)Can be applied over existing Kool Deck surfaces200 sq ft per kit, 2 coats$259 per kit (Nov 2026)Encore Coatings
Miracote Colorbond SR (acrylic topcoat)Sold as a topcoat for polymer modified cementitious coatings; Kool Deck not named300 to 320 sq ft per gal per coat, 2 coatsNot listedMiracote
Clean onlyStrong soap, water and a nylon broom; owners should not acid wash3,000 psi surface cleaner for mineral deposits (contractors)Mortex Care and Cleaning sheet

Sources: Mortex Systex Deck Paint; Mortex Protect-A-Deck instructions; Encore Coatings (Nov 2026); Miracote (2012); Mortex Care and Cleaning. Download CSV

Protect-A-Deck is mixed 1 part to 15 parts water, sprayed in 2 to 3 coats, and covers 1,600 to 2,400 sq ft per gallon of mix; the deck must be at least 28 days old and between 40F and 95F (Mortex). For cleaning, Mortex says owners should not attempt muriatic acid washes and should scrub with strong soap and a nylon broom, rinsing often where a salt chlorine generator is used. Salt care for the rest of the pool is on our salt water pool maintenance page.

How do you repair cracked or delaminating cool deck?

Patch small spalls with a Mortex Kool Deck Repair Kit, which covers about 6 sq ft and cures under plastic for exactly two days. Widespread hollow or flaking topping means the bond has failed: strip it, etch and re-top with a bonding coat. A crack through the slab, or a deck that drains toward the pool, needs concrete repair first. Crack widths, sealant rules and dated repair costs for the slab underneath are in our pool deck crack repair guide.

  1. Clean out the patchRemove loose and deteriorated concrete; soak the patch and the surrounding deck.
  2. Etch only the patch1 part muriatic acid to 1 part water, confined to the patch; it should boil vigorously when the surface is clean. Keep it wet.
  3. Bond coatMix PTA bonder 2 parts powder to 1 part water and scrub on a thin coat; never mix PTA into the topping.
  4. Splash and trowelAdd 24 oz of water to the premixed Kool Deck, splash into the wet PTA, resplash, then trowel to match the surrounding flats.
  5. CureCover with plastic weighted with sand for exactly two days, then wash; wash often for 6 weeks to build strength.
Decision table: patch, re-top, recoat or replace a cool deck
If your situation isDo thisWhy (source)
Bare concrete deck, sound slab, hot climateAdd a light-colored cool deck topping or spray texture$4 to $8 per sq ft installed (ConcreteNetwork, 2026)
Existing Kool Deck, faded or stained but soundClean, then seal with a clear siloxane or a light roll-on cool coating; skip ordinary deck paintMortex: its own deck paint makes Kool Deck hotter and slicker
Chips or spalls of a few square feetPatch with a Mortex Repair Kit, 6 sq ft per kit, under plastic for exactly 2 daysMortex Repair Kit instructions
Topping hollow, flaking or delaminating over large areasRemove loose topping (scarifier, 3,000 psi wash), acid etch, PTA bond coat, re-topMortex existing-concrete instructions
Slab cracked through, heaved or draining toward the poolRepair or replace the concrete before any toppingMortex: repair major cracks well in advance; ISPSC 306.5.1
Freeze-thaw climateProtect new topping from frost for 28 days; compare pavers tested to ASTM C1645Mortex; 2001 C666 result: flats start to fail at 70 cycles
You want a stone or brick lookPrice a stamped overlay ($6 to $14) or pavers ($12 to $45)ConcreteNetwork (2026)

Sources: Mortex Repair Kit, existing concrete and ASTM documents; Systex Deck Paint; ISPSC 2024, 306.5.1; ConcreteNetwork and stamped overlay pages (2026). Download CSV

Patch, re-top, recoat or replace: the same thresholds as the decision table, from Mortex's repair and existing-concrete instructions, the ISPSC 306.5.1 drainage rule and ConcreteNetwork 2026 prices.
Patch, re-top, recoat or replace: the same thresholds as the decision table, from Mortex’s repair and existing-concrete instructions, the ISPSC 306.5.1 drainage rule and ConcreteNetwork 2026 prices.

Delamination has a known cause list in Mortex’s own instructions: the bond coat fails on dirt, wax, paint, curing compounds or neutralizer film, and on any non-cementitious surface, and the base concrete should preferably be 28 days old. A past president of the Pool & Hot Tub Alliance’s Southern Arizona chapter, Manny Sanchez, told Rosie on the House that pavers avoid the cracking and delamination of older decks. If the slab itself has moved, our pool deck contractors page covers slab replacement and who to hire.

How much does cool deck cost compared with pavers and stamped concrete?

Cool deck is the cheapest way to refinish a sound slab: $4 to $8 per sq ft installed for basic resurfacing (ConcreteNetwork, February 2026), or $1,792 to $3,584 for a 448 sq ft deck. A stamped overlay runs $6 to $14, concrete pavers $12 to $45 and Phoenix travertine $20 to $34. Kool Deck Elite material for 448 sq ft is $384.65.

Cool deck vs stamped concrete vs pavers: installed price per square foot, United States, 2025 to 2026US dollars per sq ft installed; Shasta Pools, California Pools & Landscape and AE Outdoor Living are Arizona prices
Cool deck vs stamped concrete vs pavers: installed price per square foot, United States, 2025 to 2026Range chart of installed prices per square foot: cool deck or spray texture resurfacing $4 to $8, HomeGuide resurfacing $3 to $12, Shasta texture $5 to $10, acrylic cool deck average $17, stamped overlay $6 to $14, stamped concrete $8 to $19, new broom concrete $6 to $11, concrete pavers $12 to $45, travertine pavers $20 to $34.$0$12.5$25$37.5$50Cool deck or spray texture over existing concrete (basic resurfacing) (ConcreteNetwork): $4 to $8Cool deck or spray texture over existing concrete (basic resurfacing) (ConcreteNetwork)Concrete pool deck resurfacing (HomeGuide): $3 to $12Concrete pool deck resurfacing (HomeGuide)New texture on an existing deck (removal adds $1.30 to $2.00) (Shasta Pools): $5 to $10New texture on an existing deck (removal adds $1.30 to $2.00) (Shasta Pools)Acrylic pool deck, average (cool deck page) (California Pools & Landscape): $17 to $17Acrylic pool deck, average (cool deck page) (California Pools & Landscape)Stamped concrete overlay (ConcreteNetwork): $6 to $14Stamped concrete overlay (ConcreteNetwork)Stamped concrete pool deck (HomeGuide): $8 to $19Stamped concrete pool deck (HomeGuide)New broom-finish concrete deck (ConcreteNetwork): $6 to $11New broom-finish concrete deck (ConcreteNetwork)Concrete pavers (ConcreteNetwork): $12 to $45Concrete pavers (ConcreteNetwork)Travertine pavers (AE Outdoor Living): $20 to $34Travertine pavers (AE Outdoor Living)

Source: ConcreteNetwork (Feb and Jun 2026); HomeGuide (Dec 22, 2025); Shasta Pools (2025); California Pools & Landscape (May 2026); AE Outdoor Living (2026). Download chart data (CSV)

Cool deck cost compared: installed price per sq ft and total for a 448 sq ft deck (4 ft walkway around a 16 x 32 ft pool), plus materials-only math
OptionPrice per sq ftTotal for 448 sq ftPublisher and dateGeography
Cool deck or spray texture over existing concrete (basic resurfacing)$4 to $8$1,792 to $3,584ConcreteNetwork, updated Feb 13, 2026US
Concrete pool deck resurfacing$3 to $12$1,344 to $5,376HomeGuide, Dec 22, 2025US
New texture on an existing deck (removal adds $1.30 to $2.00)$5 to $10$2,240 to $4,480Shasta Pools, 2025Arizona
Acrylic pool deck, average (cool deck page)$17$7,616California Pools & Landscape, page modified May 12, 2026Arizona
Stamped concrete overlay$6 to $14$2,688 to $6,272ConcreteNetwork, updated Jun 4, 2026US
Stamped concrete pool deck$8 to $19$3,584 to $8,512HomeGuide, Dec 22, 2025US
New broom-finish concrete deck$6 to $11$2,688 to $4,928ConcreteNetwork, updated Feb 13, 2026US
Concrete pavers$12 to $45$5,376 to $20,160ConcreteNetwork, updated Feb 13, 2026US
Travertine pavers$20 to $34$8,960 to $15,232AE Outdoor Living, 2026Phoenix, AZ
Materials only: Kool Deck Elite$54.95 per 50 lb bag (65 to 70 sq ft)7 bags = $384.65 plus color packsDIY Pool Depot, Nov 2, 2026US
Materials only: Encore COOL$259 per kit (200 sq ft)3 kits = $777 plus 1 gal paint per kitEncore Coatings, Nov 2, 2026US
Materials only: SGM One-Step Spray Deck$65 per 50 lb bag (150 to 225 sq ft)2 to 3 bags = $130 to $195 plus sealerPools & Surfaces, Oct 27, 2026US

PC&S calculation: total = 448 x rate; units = 448 / coverage, rounded up. Sources: ConcreteNetwork; ConcreteNetwork stamped overlay; HomeGuide; Shasta Pools; California Pools & Landscape; AE Outdoor Living; DIY Pool Depot; Encore Coatings; Pools & Surfaces. Download CSV

Life and upkeep change the ranking. HUD’s capital-needs table plans on 15 years for a pool deck and 30 for brick or concrete pavers (HUD); an Arizona builder, California Pools & Landscape, says cool decks last 15 to 25 years with care. Topping thickness explains the price gap: a Kool Deck Elite topping 5/32 in or thinner uses 7 bags of Kool Deck Elite on 448 sq ft, while pavers bring a full base. Our pool deck resurfacing cost guide runs the same bag math for a 600 sq ft deck across nine products.

Slip rules apply to any choice. ISPSC 306.2 requires slip-resistant decks and a wet DCOF of 0.42 where a surface is tested (ISPSC 2024); Mortex calls Kool Deck non-skid but publishes no DCOF, and warns that its paint makes the surface slicker. Deck falls are hard to count because NEISS coders file a pool deck under product code 1817, as our pool injury statistics report explains. Remodelers often redo the deck with the interior and tile, covered on our pool remodeling page; in hot markets such as Phoenix, plan the deck color with the build.

How we compiled this

We read 30 documents in October and November 2026: 11 Mortex instruction sheets, product pages and its 2001 ASTM sheet; data sheets or product pages from Miracote, SGM, Sundek and Encore Coatings; two dated seller prices; the EPA cool pavement pages, the 2024 ISPSC deck section and HUD’s useful-life table; and cost or explainer pages from ConcreteNetwork, HomeGuide, Shasta Pools, California Pools & Landscape, AE Outdoor Living, InspectApedia and Rosie on the House. We did not apply or test any coating or measure deck temperatures; the cost example multiplies published rates by 448 sq ft.

Frequently Asked Questions

What is cool deck?

Cool deck is a light, textured topping over a concrete pool deck that stays cooler underfoot than bare concrete. The original, Keystone Kool Deck, is a cement topping Mortex introduced in 1962, applied no thicker than 1/8 in and left about 40% smooth and 60% void (Mortex). Acrylic spray textures and roll-on coatings now use the same name.

Is cool deck a paint?

Kool Deck is not: it is a cement topping that Mortex says becomes as strong as the base concrete, and ConcreteNetwork calls cool deck overlays spray-applied, not paint. Some products sold as cool deck paint are acrylic coatings, such as Encore COOL at $259 per 200 sq ft kit (Encore, November 2026).

Can you paint over Kool Deck?

You can, but Mortex warns that its own Systex Deck Paint does not provide cooling and makes a Kool Deck surface hotter and slicker (Mortex). To protect it without changing the look, Mortex sells Protect-A-Deck, a clear siloxane mixed 1:15 and rated for 5 to 10 years of water repellency. Encore sells its COOL coating for use over Kool Deck.

How much does cool deck cost per square foot?

About $4 to $8 per sq ft installed for basic resurfacing (ConcreteNetwork, February 2026); HomeGuide gives $3 to $12. A 448 sq ft deck comes to $1,792 to $3,584. Kool Deck Elite material is $54.95 per 50 lb bag covering 65 to 70 sq ft (DIY Pool Depot, November 2026).

How long does cool deck last?

HUD’s capital-needs table plans on 15 years for a pool deck (HUD), and an Arizona builder, California Pools & Landscape, says cool decks last 15 to 25 years with maintenance. In freeze-thaw climates, Mortex’s 2001 test sheet reports Kool Deck flats start to fail at 70 ASTM C666 cycles, so protect new work from frost for 28 days.

What is the best cool deck color for a pool?

The lightest one. Mortex says darker Kool Deck colors are warmer, and its Designer Colors are warmer than standard Kool Deck. In Miracote’s data sheet the same solar-reflective acrylic scores SRI 80 in White and 46 in Adobe (Miracote, 2012). Encore warns that grays and dark earth tones can contain black pigment.

Is cool deck slippery when wet?

Mortex designs Kool Deck as a non-skid texture but publishes no wet DCOF. ISPSC 306.2 requires slip-resistant decks and a 0.42 wet DCOF where a surface is tested (ISPSC 2024). Paint makes it worse: Mortex says Systex Deck Paint turns Kool Deck slicker, and ConcreteNetwork suggests mixing clear grit into any sealer.

Can cool deck go over existing concrete?

Yes. Mortex publishes an existing-concrete method: strip toppings, acid etch 1:1 on old concrete, rinse twice, apply PTA Bonding Agent (about 350 sq ft per carton), splash and trowel, then cover with plastic for two days (Mortex). It will not bond to brick, tile, stone or paint.

Sources

  1. Mortex Manufacturing. Keystone Kool Deck product page and technical data. Accessed 2026-11-02.
  2. Mortex Manufacturing. Keystone Kool Deck instructions (fresh concrete). Accessed 2026-11-02.
  3. Mortex Manufacturing. Application Instructions for Keystone Kool Deck on Existing Concrete. Accessed 2026-11-02.
  4. Mortex Manufacturing. Keystone Kool Deck ASTM Sheet (2001). Accessed 2026-11-02.
  5. Mortex Manufacturing. Care and Cleaning Instructions: Kool Deck, Kool Deck Elite, Designer Colors and Solement. Accessed 2026-11-02.
  6. Mortex Manufacturing. Kool Deck consumer brochure. Accessed 2026-11-02.
  7. Mortex Manufacturing. Kool Deck Elite contractor brochure and instructions. Accessed 2026-10-26.
  8. Mortex Manufacturing. Designer Colors. Accessed 2026-11-02.
  9. Mortex Manufacturing. Systex Deck Paint. Accessed 2026-11-02.
  10. Mortex Manufacturing. Protect-A-Deck Instructions. Accessed 2026-11-02.
  11. Mortex Manufacturing. Kool Deck Repair Kit Instructions. Accessed 2026-11-02.
  12. Miracote. MiraGard Colorbond SR technical data sheet (Rev 02-07-2012). Accessed 2026-11-02.
  13. SUNDEK. Cool Deck Coatings for Your Pool. Accessed 2026-11-02.
  14. SGM, Inc.. One Step Spray Deck information sheet (October 2022). Accessed 2026-10-27.
  15. Pools & Surfaces. SGM One-Step Spray Deck System 50 lb. Accessed 2026-10-27.
  16. Encore Coatings. Cool Pool Deck Coating Kit. Accessed 2026-11-02.
  17. DIY Pool Depot. Mortex Kool Deck Elite. Accessed 2026-11-02.
  18. ConcreteNetwork. Pool deck cost (updated February 13, 2026). Accessed 2026-10-27.
  19. ConcreteNetwork. Stamped overlay cost (updated June 4, 2026). Accessed 2026-10-27.
  20. ConcreteNetwork. Cool Deck for Pools Offers Heat & Slip Resistance (March 24, 2021). Accessed 2026-11-02.
  21. HomeGuide. How Much Does a Pool Deck Cost? (December 22, 2025). Accessed 2026-10-26.
  22. Shasta Pools. Pool deck resurfacing cost. Accessed 2026-10-27.
  23. California Pools & Landscape. Cool Deck (FAQ; modified May 12, 2026). Accessed 2026-11-02.
  24. AE Outdoor Living. Concrete vs pavers vs travertine pool deck. Accessed 2026-10-26.
  25. Rosie on the House. What Are The Pros And Cons Of Kool Deck Vs. Acrylic Pool Deck Vs. Pavers?. Accessed 2026-11-02.
  26. U.S. EPA. Using Cool Pavements to Reduce Heat Islands. Accessed 2026-10-26.
  27. U.S. EPA. Reducing Urban Heat Islands: Compendium of Strategies, Cool Pavements. Accessed 2026-10-26.
  28. International Code Council via UpCodes. International Swimming Pool and Spa Code 2024, Section 306. Accessed 2026-10-26.
  29. HUD. CNA e-Tool Estimated Useful Life Table. Accessed 2026-10-27.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.