
Swim Spa Cost: Model Prices, Installation, Weight and Power
Swim spa cost runs $24,599 to $74,999 at published October 2026 prices for 20 models, plus $5,000 to $20,000 or more for delivery, a concrete pad and a 30 to 60 A circuit (Endless Pools).
- ✓Swim spa cost, model by modelThe median published price of 20 models is $31,499, and 8 list under $30,000 (maker pages, October 19, 2026).
- ✓The weight a pad must carryFilled swim spas load 103 to 200 lb per sq ft, against the 40 lb per sq ft live load the IRC sets for decks.
- ✓Standby power ceilingCalifornia's Title 20 limit puts idle heating at $54 to $94 a month at EIA's 18.19 cents per kWh.
Key takeaways
- Twenty swim spas from Endless Pools, Sundance, Royal Spa and Aqua Living carry published prices from $24,599 to $74,999 as of October 19, 2026; the Endless Pools E2000 tops the list (Endless Pools E2000 page).
- Endless Pools prices installation at $5,000 to $20,000 or more, with a concrete pad alone at $2,500 to $5,000 or more (Endless Pools, July 30, 2026).
- A filled swim spa puts 103 to 200 lb on each square foot of its footprint, while IRC Table R301.5 sets a 40 psf live load for decks (IRC 2021 R301.5).
- Spec sheets call for a dedicated 30 to 60 A, 230 or 240 V GFCI circuit; Endless Pools also requires a subpanel (Endless Pools pre-delivery instructions).
- California Title 20 caps exercise-spa standby power at 3.75 x V^(2/3) + 40 W, which works out to $54 to $94 a month for these 20 models at 18.19 cents per kWh (20 CCR 1605.3; EIA).
How much does a swim spa cost in 2026?
A swim spa costs $24,599 to $74,999 before installation at the published prices of 20 models captured on October 19, 2026, with a median of $31,499. Installation adds $5,000 to $20,000 or more, per Endless Pools. Cost guides quote wider bands, from $5,000 to over $80,000, because they mix in imported entry units and in-ground builds.
| Key number | Value | Source |
|---|---|---|
| Published price range, 20 swim spa models | $24,599 to $74,999 | Maker product pages, captured 2026-10-19 |
| Median published price, 20 models | $31,499 | PC&S calculation from the model table |
| Models listed under $30,000 | 8 of 20 | PC&S count from the model table |
| Installation, delivery to decking | $5,000 to $20,000+ | Endless Pools, July 30, 2026 |
| Load on the footprint, filled, no occupants | 103 to 200 lb per sq ft | PC&S calculation from maker spec sheets |
| Code-minimum live load for a deck | 40 lb per sq ft | IRC 2021 Table R301.5 |
| Dedicated circuit on the spec sheets | 30 to 60 A at 230 or 240 V | Maker spec sheets |
| Standby power ceiling, cost per month | $54 to $94 | CA Title 20 Table G-5 x EIA 18.19 cents per kWh |
Sources: maker price pages (captured 2026-10-19); Endless Pools cost guide (July 30, 2026); IRC 2021 Table R301.5; California Title 20, 20 CCR 1605.3; EIA Electric Power Monthly Table 5.6.B (July 2026 data). Medians, counts and loads are PC&S calculations. Download CSV
| Publisher | Date | Published range | What the range covers |
|---|---|---|---|
| Endless Pools | July 30, 2026 | $25,000 to $80,000+; installation $5,000 to $20,000+ | Unit price; installation separate |
| HomeGuide | October 13, 2023 | $20,000 to $40,000 average; $10,000 to $65,000+ | Installed, including delivery |
| Jacuzzi | 2025 guide | $15,000 to over $50,000 | Unit price |
| Sundance Spas | 2026 | $5,000 to over $50,000 | Unit price, entry to high-end |
| Bullfrog Spas | August 17, 2021 | $7,000 to $40,000+; average $25,000 to $30,000 | Unit price |
| Michael Phelps Swim Spa | March 12, 2025 | Entry-level from about $20,000 | Unit price |
Sources: Endless Pools, HomeGuide, Jacuzzi, Sundance Spas, Bullfrog Spas, Michael Phelps Swim Spa, all opened 2026-10-19. Download CSV
The guides disagree by a factor of ten at the bottom of the range. Sundance’s 2026 pricing article starts at $5,000, Bullfrog’s 2021 page at $7,000, while Endless Pools, writing on July 30, 2026, starts quality swim spas at $25,000 (Endless Pools). The cheapest published MSRP we found from a maker that also lists gallons, dry weight and circuit size was $24,599 for the Aqua Living 12.6 ft Newporter, which the outlet also lists on sale at $17,499 (Aqua Living Swim Series).
HomeGuide’s installed average of $20,000 to $40,000 dates from October 13, 2023 (HomeGuide). Against October 2026 maker prices, that band now covers the unit alone for 13 of the 20 models in the table below, not the unit plus installation. For a factory-built hot tub instead of a swim spa, the numbers sit in a lower bracket, covered in our hot tub cost guide.
Swim spa prices by model: 20 published prices
Four makers publish a price next to the spec sheet: Endless Pools (9 models, $26,499 to $74,999 starting MSRP), Sundance (4 models, $27,299 to $53,599 MSRP), Royal Spa (1 model, $28,595 factory-direct) and Aqua Living (6 models, $24,599 to $31,399 MSRP). Jacuzzi, Michael Phelps and Bullfrog route buyers to a dealer quote instead.
| Maker | Model | Length x width (in) | Water (gallons) | Swim system | Circuit | Published price | Price type | Source page | Captured |
|---|---|---|---|---|---|---|---|---|---|
| Endless Pools | R200 | 144 x 89 | 1,335 | RecSport jetted current | 30 A (60 A optional) | $26,499 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/r200 | 2026-10-19 |
| Endless Pools | R220 | 144 x 89 | 1,080 | RecSport jetted current | 30 A | $27,999 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/r200 | 2026-10-19 |
| Endless Pools | R500 | 180 x 89 | 1,785 | RecSport jetted current | 30 A | $32,499 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/r200 | 2026-10-19 |
| Endless Pools | X500 | 180 x 89 | 1,650 | SwimCross jetted current | 30 A, 60 A optional (model page); 60 A (PDI) | $38,999 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/x500 | 2026-10-19 |
| Endless Pools | X2000 | 240 x 89 | 2,350 | SwimCross current, 2 temperature zones | 60 A | $59,999 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/x500 | 2026-10-19 |
| Endless Pools | E500 | 180 x 89 | 1,770 | Hydrodrive current, 31 pace settings | 60 A | $55,999 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/e500 | 2026-10-19 |
| Endless Pools | E550 | 180 x 94 | 2,392 | Hydrodrive current | 60 A | $58,999 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/e500 | 2026-10-19 |
| Endless Pools | E700 | 204 x 89 | 2,150 | Hydrodrive current | 60 A | $61,999 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/e500 | 2026-10-19 |
| Endless Pools | E2000 | 240 x 89 | 2,335 | Hydrodrive current, 2 temperature zones | 60 A | $74,999 | Starting at MSRP | https://www.endlesspools.com/products/swim-spas/e2000 | 2026-10-19 |
| Sundance | Splash 12 | 149 x 92 | 1,233 | 2 Splash swim jets | 40 A (GFCI rated 50 A) | $27,299 | MSRP | https://www.sundancespas.com/blog-articles/costco-swim-spa-prices-pros-cons-and-better-alternatives-in-2026 | 2026-10-19 |
| Sundance | Stream 13 | 149 x 92 | 964 | 1 dedicated swim pump plus 2 spa pumps | 40 A (GFCI rated 50 A) | $31,599 | MSRP | https://www.sundancespas.com/blog-articles/costco-swim-spa-prices-pros-cons-and-better-alternatives-in-2026 | 2026-10-19 |
| Sundance | Stream 17 | 209 x 92 | 1,929 | 1 dedicated swim pump plus 2 spa pumps | 40 A (GFCI rated 50 A) | $43,499 | MSRP | https://www.sundancespas.com/blog-articles/swim-spa-pricing-in-2026-what-you-need-to-know | 2026-10-19 |
| Sundance | Surf 17 | 209 x 92 | 1,929 | 2 dedicated swim pumps, 10 speeds | 48 A (GFCI rated 60 A) | $53,599 | MSRP | https://www.sundancespas.com/blog-articles/costco-swim-spa-prices-pros-cons-and-better-alternatives-in-2026 | 2026-10-19 |
| Royal Spa | Royal Swim Spa | 180 x 94 | 1,960 | 6 swim jets on 3 pumps, 17 jets total | 50 A | $28,595 | Factory-direct price | https://royalspa.com/swim-spas/royal-swim-spa/ | 2026-10-19 |
| Aqua Living | 12.6 ft Newporter | 151 x 89 | 1,300 | 2 river jets, 8 therapy jets, 2 pumps | 60 A | $24,599 (listed sale $17,499) | MSRP | https://aquagymswimspas.com/spas/swim-series/ | 2026-10-19 |
| Aqua Living | 12.6 ft Malibu | 151 x 89 | 1,600 | 2 river jets, 28 therapy jets, 2 pumps | 60 A | $26,299 (listed sale $18,699) | MSRP | https://aquagymswimspas.com/spas/swim-series/ | 2026-10-19 |
| Aqua Living | 12.6 ft Regatta | 151 x 89 | 1,600 | 2 river jets, 66 therapy jets, 3 pumps | 60 A | $29,699 (listed sale $20,999) | MSRP | https://aquagymswimspas.com/spas/swim-series/ | 2026-10-19 |
| Aqua Living | Catalina Monterey (14 ft) | 168 x 89 | 1,700 | 2 river jets, 22 therapy jets, 2 pumps | 60 A | $27,999 (listed sale $19,899) | MSRP | https://aquagymswimspas.com/spas/swim-series/ | 2026-10-19 |
| Aqua Living | Freestyle (14 ft) | 167.25 x 89.5 | 1,750 | 2 river jets, 66 therapy jets, 3 pumps | 60 A | $31,399 (listed sale $22,399) | MSRP | https://aquagymswimspas.com/spas/swim-series/ | 2026-10-19 |
| Aqua Living | Catalina (16 ft) | 189.25 x 89.25 | 2,000 | 2 river jets, 22 therapy jets, 2 pumps | 60 A | $31,399 (listed sale $22,399) | MSRP | https://aquagymswimspas.com/spas/swim-series/ | 2026-10-19 |
Sources: Endless Pools model pages and pre-delivery instructions; Sundance prices from Sundance blog model cards and specs from Sundance product pages; Royal Spa; Aqua Living Factory Outlets. Each row links its maker page in the CSV. Download CSV
Endless Pools prices are "starting at" MSRP. Aqua Living also lists sale prices about 29% below MSRP.
Source: Endless Pools, Sundance Spas, Royal Spa and Aqua Living Factory Outlets product pages, captured 2026-10-19. Download chart data (CSV)
The price gap inside one brand tracks the current system more than the length. The 12 ft Endless Pools R200 with a jetted RecSport current starts at $26,499, while the 15 ft E500 with the Hydrodrive current, rated to a 1:08 per 100 yd pace with 31 settings, starts at $55,999 (Endless Pools E500). That is a $29,500 step for a 3 ft longer shell.
Read each price type before comparing. Endless Pools quotes a starting MSRP, Sundance shows MSRP on its model cards but states that final pricing varies by dealership, and Royal Spa’s $28,595 is a factory-direct price with installation not included (Royal Spa). Aqua Living lists sale prices about 29% below its MSRP. Jacuzzi’s swim spa listing shows only price tiers, filtered as “Luxury $19,000+” (Jacuzzi swim spa listing).
What does swim spa installation cost?
Swim spa installation costs $5,000 to $20,000 or more, per Endless Pools in July 2026, and Jacuzzi’s 2025 guide puts it at $5,000 to $10,000. The pad, the electrical run and crane access drive most of the spread: a crane alone is $1,000 to $5,000 or more, and a panel upgrade another $1,000 to $5,000 or more.
| Line item | Published range | Source and date |
|---|---|---|
| Delivery, standard | $500 to $2,000+ | Endless Pools, July 30, 2026 |
| Delivery | $800 to $1,500 | Jacuzzi swim spa price guide, 2025 |
| Delivery | $100 to $1,500+ | HomeGuide, October 13, 2023 |
| Crane-assisted delivery | $1,000 to $5,000+ | Endless Pools, July 30, 2026 |
| Crane access | $500 to $1,000+ | Sundance Spas, 2026 |
| Concrete pad | $2,500 to $5,000+ | Endless Pools, July 30, 2026 |
| Concrete pad | $1,000 to $2,500 | Sundance Spas, 2026 |
| Concrete slab | $6 to $12 per sq ft | HomeGuide, October 13, 2023 |
| Site preparation | $500 to $5,000+ | Endless Pools, July 30, 2026 |
| Electrical installation | $1,000 to $5,000+ | Endless Pools, July 30, 2026 |
| Electrical work, dedicated circuit and GFCI | $800 to $1,600 | HomeGuide, October 13, 2023 |
| Electrician for 50 A service | $500 to $1,500 | Sundance Spas, 2026 |
| Subpanel, 50 A; 100 A | $400 to $600; $500 to $1,500 | HomeGuide, October 13, 2023 |
| Panel upgrade | $1,000 to $5,000+ | Endless Pools, July 30, 2026 |
| Permits and inspections | $100 to $2,000+ | Endless Pools, July 30, 2026 |
| Decking and hardscaping | $2,000 to $25,000+ | Endless Pools, July 30, 2026 |
| Installation, total | $5,000 to $20,000+ | Endless Pools, July 30, 2026 |
| Installation, total | $5,000 to $10,000 | Jacuzzi swim spa price guide, 2025 |
Sources: Endless Pools (July 30, 2026), HomeGuide (October 13, 2023), Sundance Spas (2026), Jacuzzi (2025 guide). Download CSV
Ranges are a maker estimate, not quotes; each top value is shown with a plus sign by the source.
Source: Endless Pools, How Much Does a Swim Spa Cost? (published July 30, 2026). Download chart data (CSV)
- Measure the delivery pathShells in the model table are 89 to 94 in wide and 12 to 20 ft long. Walk the route from the street with a tape; anything narrower than the shell plus working room means a crane at $1,000 to $5,000 or more (Endless Pools).
- Pull the permitEndless Pools budgets $100 to $2,000 or more for permits and inspections. Our survey of official fees found a middle value of $500 for a $68,000 in-ground pool across 18 US cities and counties, in the pool permit cost study.
- Pour the padEndless Pools requires a reinforced concrete pad at least 6 in thick, with the rebar or mesh tied to a bond wire. HomeGuide prices a slab at $6 to $12 per sq ft.
- Run the circuitA licensed electrician runs a dedicated 30 to 60 A circuit; for a 50 A spa Master Spas specifies #6 AWG copper with at least a #10 AWG ground, and the disconnect sits at least 5 ft from the water.
- Set and fillFill volumes in the table run from 964 to 2,392 gallons. HomeGuide puts a garden-hose fill at $4 to $10 per 1,000 gallons, so most fills cost under $25.
- Heat up before first useAn Endless Pools 4,000 W heater raises 1,770 gallons by 20 F in about 21.6 hours with no losses: 295,236 Btu at 13,648 Btu per hour, or 86.5 kWh, about $15.74 at 18.19 cents.
The permit step links to official fee schedules in our pool permit cost study. Ask the building desk whether your model is permitted as a spa or a pool before you budget: 11 of the 18 jurisdictions in that study charge a flat fee per pool, and 6 scale the fee with declared value.
| Line | Input | Low | High | Source |
|---|---|---|---|---|
| Royal Swim Spa, factory-direct | 15 ft x 7 ft 10 in, 1,960 gallons | $28,595 | $28,595 | Royal Spa product page, 2026-10-19 |
| Standard delivery | No crane | $500 | $2,000 | Endless Pools range, July 30, 2026 |
| Concrete pad | 17 x 9.83 ft = 167.2 sq ft (1 ft margin, PC&S assumption) x $6 to $12 | $1,003 | $2,006 | HomeGuide, October 13, 2023 |
| Electrical | Dedicated 240 V, 50 A GFCI circuit | $800 | $1,600 | HomeGuide, October 13, 2023 |
| Permit and inspection | Local fee | $100 | $2,000 | Endless Pools range, July 30, 2026 |
| First fill by garden hose | 1,960 gallons x $4 to $10 per 1,000 gallons | $8 | $20 | HomeGuide, October 13, 2023 |
| Purchase and install, total | Sum of the lines above | $31,006 | $36,221 | PC&S calculation |
| Standby power, year one, at the ceiling | 627 W x 8,760 h x 18.19 cents | $1,000 | $1,000 | CA Title 20 Table G-5; EIA |
| First-year total | Install total plus standby ceiling | $32,006 | $37,221 | PC&S calculation |
Sources: Royal Spa (2026-10-19), Endless Pools (July 30, 2026), HomeGuide (October 13, 2023), California Title 20, EIA. Pad margin is a PC&S assumption; totals are PC&S calculations. Download CSV
The worked example lands at $31,006 to $36,221 to buy and install, before any decking, and $32,006 to $37,221 with a year of standby power at the legal ceiling. The unit is 79% to 92% of that bill, so the model choice moves the total more than any site line except a crane or an in-ground vault.
How much does a swim spa weigh, and what can hold it?
A filled swim spa weighs 9,788 to 23,564 lb before anyone climbs in, which works out to 103 to 200 lb per square foot of footprint across the 20 models here. A code-minimum deck is designed for 40 lb per sq ft (IRC Table R301.5), so a swim spa belongs on a reinforced slab or an engineered structure, never an ordinary deck. The same arithmetic for 30 standard hot tubs is in our hot tub weight table.
| Model | Footprint (sq ft) | Water (gallons) | Water weight (lb) | Dry weight (lb) | Total, no occupants (lb) | Load (lb per sq ft) | Maker-stated filled weight (lb) | Maker-stated load (lb per sq ft) |
|---|---|---|---|---|---|---|---|---|
| Endless Pools E550 | 117.5 | 2,392 | 19,949 | 3,575 | 23,524 | 200 | 25,235 | 245 |
| Aqua Living 12.6 ft Malibu | 93.3 | 1,600 | 13,344 | 2,700 | 16,044 | 172 | 13,575 | Not stated |
| Aqua Living 12.6 ft Regatta | 93.3 | 1,600 | 13,344 | 2,700 | 16,044 | 172 | 16,175 | Not stated |
| Aqua Living Catalina (16 ft) | 117.3 | 2,000 | 16,680 | 3,254 | 19,934 | 170 | 18,350 | Not stated |
| Aqua Living Freestyle (14 ft) | 104.0 | 1,750 | 14,595 | 2,900 | 17,495 | 168 | 17,500 | Not stated |
| Endless Pools E700 | 126.1 | 2,150 | 17,931 | 3,025 | 20,956 | 166 | 22,685 | 210 |
| Aqua Living Catalina Monterey (14 ft) | 103.8 | 1,700 | 14,178 | 2,800 | 16,978 | 164 | 17,000 | Not stated |
| Endless Pools E2000 | 148.3 | 2,335 | 19,474 | 4,090 | 23,564 | 159 | 25,795 | 200 |
| Endless Pools E500 | 111.2 | 1,770 | 14,762 | 2,905 | 17,667 | 159 | 19,400 | 205 |
| Royal Spa Royal Swim Spa | 117.5 | 1,960 | 16,346 | 2,000 | 18,346 | 156 | 18,850 | Not stated |
| Endless Pools X2000 | 148.3 | 2,350 | 19,599 | 3,460 | 23,059 | 155 | 24,790 | 250 |
| Endless Pools R500 | 111.2 | 1,785 | 14,887 | 2,055 | 16,942 | 152 | 18,675 | 190 |
| Endless Pools X500 | 111.2 | 1,650 | 13,761 | 2,705 | 16,466 | 148 | 18,200 | 190 |
| Endless Pools R200 | 89.0 | 1,335 | 11,134 | 1,845 | 12,979 | 146 | 14,720 | 190 |
| Aqua Living 12.6 ft Newporter | 93.3 | 1,300 | 10,842 | 2,700 | 13,542 | 145 | 13,575 | Not stated |
| Sundance Stream 17 | 133.5 | 1,929 | 16,088 | 2,860 | 18,948 | 142 | 18,960 | Not stated |
| Sundance Surf 17 | 133.5 | 1,929 | 16,088 | 2,860 | 18,948 | 142 | 18,960 | Not stated |
| Sundance Splash 12 | 95.2 | 1,233 | 10,283 | 1,800 | 12,083 | 127 | 12,093 | Not stated |
| Endless Pools R220 | 89.0 | 1,080 | 9,007 | 1,765 | 10,772 | 121 | 12,515 | 190 |
| Sundance Stream 13 | 95.2 | 964 | 8,040 | 1,748 | 9,788 | 103 | 9,790 | Not stated |
Sources: maker spec sheets as linked in the model table (Endless Pools PDI, Sundance, Royal Spa, Aqua Living); water at 8.34 lb per gallon from USGS water density (62.366 lb per cu ft at 60 F) and 7.48 gallons per cu ft. Loads are PC&S calculations. Download CSV
IRC Table R301.5 sets a 40 psf live load for decks; every model here is 2.6 to 5.0 times that.
Source: PC&S calculation from maker spec sheets (captured 2026-10-19) and USGS water density. Download chart data (CSV)

| Step | Input | Result | Source |
|---|---|---|---|
| Water volume | Sundance Stream 17 spec sheet | 1,929 gallons | Sundance Spas spec page, 2026-10-19 |
| Water weight | 1,929 gallons x 8.34 lb per gallon | 16,088 lb | USGS: 62.366 lb per cu ft at 60 F / 7.48 gallons per cu ft |
| Add dry weight | 16,088 lb + 2,860 lb | 18,948 lb | Sundance lists 18,960 lb filled |
| Footprint | 209 in x 92 in = 17.42 ft x 7.67 ft | 133.5 sq ft | Sundance Spas spec page |
| Load per sq ft | 18,948 lb / 133.5 sq ft | 142 lb per sq ft | PC&S calculation |
| Add 4 adults at 175 lb | 19,648 lb / 133.5 sq ft | 147 lb per sq ft | Occupant weight assumption from Endless Pools PDI |
| Compare with a code-minimum deck | 147 / 40 lb per sq ft | 3.7 times the deck live load | IRC 2021 Table R301.5 |
Sources: Sundance Stream 17 specifications (2026-10-19), USGS, Endless Pools PDI (175 lb occupant assumption), IRC 2021 Table R301.5. Download CSV

Two published filled weights do not add up. Aqua Living’s 12.6 ft Malibu page lists 1,600 gallons and 2,700 lb dry but 13,575 lb filled, the same figure as the 1,300-gallon Newporter; the arithmetic gives 16,044 lb (Aqua Living Malibu). The 16 ft Catalina lists 18,350 lb filled against 19,934 lb from its own 2,000 gallons and 3,254 lb dry (Aqua Living Catalina). Design to the higher number.
Endless Pools states higher loads than our footprint arithmetic, 190 to 250 lb per sq ft against our 121 to 200, and asks for a deck rated above 250 lb per sq ft or a 6 in reinforced slab (Endless Pools PDI). Its filled weights add 1,711 to 2,231 lb of occupants, and its per-square-foot figure likely assumes a smaller bearing area than the full shell, so use the maker’s number when it is the larger one.
What electrical service does a swim spa need?
Every swim spa in the model table runs on a dedicated 230 or 240 V GFCI circuit: 30 A for the Endless Pools R models, 40 A on a 50 A GFCI for most Sundance models, 48 A on a 60 A GFCI for the Sundance Surf 17, 50 A for the Royal Swim Spa and 60 A for Aqua Living and the Endless Pools E models.
| Requirement | What the spec sheet or code text says | Source |
|---|---|---|
| Circuit size | 30 A (Endless Pools R models), 40 A on a 50 A GFCI (Sundance Splash 12, Stream 13 and 17), 48 A on a 60 A GFCI (Sundance Surf 17), 50 A (Royal Swim Spa), 60 A (Endless Pools E models, Aqua Living); the X500 model page lists 30 A with a 60 A option, while the Endless Pools PDI lists 60 A | Maker spec sheets, 2026-10-19 |
| Supply wiring for a 50 A spa | Individual dedicated 120/240 V, 4 wire: #6 AWG copper with at least #10 AWG copper ground | Master Spas electrical requirements, 2023 |
| Subpanel | Endless Pools requires a GFCI-protected subpanel fed by a 4-wire service | Endless Pools pre-delivery instructions |
| Disconnect location | Readily accessible, within sight and not less than 5 ft horizontally from the inside wall | NEC 680.12, as quoted by West Valley City, UT |
| GFCI | Outlets supplying a hot tub must be GFCI protected unless the unit is a listed package with integral GFCI | NEC 680.44(A), as quoted by West Valley City |
| Bonding | Metal within 5 ft of the inside wall bonded with No. 8 or larger copper | NEC 680.43(D) and (E), as quoted by West Valley City |
| Large heaters | Electric water heaters over 48 A subdivided and protected at not more than 60 A | NEC 680.9, as quoted by West Valley City |
| Overhead lines | No spa under or within 10 ft horizontally of conductors less than 22.5 ft above the water | NEC 680.8, as quoted by West Valley City |
Sources: maker spec sheets (2026-10-19); Master Spas 240 V electrical requirements (2023); Endless Pools PDI; West Valley City, UT hot tub rules, which quote the 2011 NEC Article 680. Section numbers can differ in the NEC edition your city has adopted. Download CSV
The electrician’s quote depends on distance and panel space. HomeGuide prices a dedicated circuit with underground conduit and up to 100 ft of wire at $800 to $1,600, a 50 A subpanel at $400 to $600 and a 100 A subpanel at $500 to $1,500 (HomeGuide, 2023). Endless Pools adds $1,000 to $5,000 or more where the main panel needs an upgrade.
Jacuzzi’s electrical guide says swim spas typically need a 220 V service with a 50 A breaker and that dual-zone models need two separate 50 A connections (Jacuzzi). Check that against the model you pick: the Endless Pools X2000 and E2000 two-zone models list a single 60 A, 230 V circuit in the maker’s chart.
How expensive is a swim spa to run?
Idle heating for the 20 swim spas here is capped by California’s Title 20 at 406 to 711 W, which is $54 to $94 a month at the 18.19 cents per kWh US average for January to July 2026. Pump and heater time during use comes on top. Maker claims range from $20 to $300 a month, and two of them fail their own arithmetic.
| Model | Water (gallons) | Title 20 standby ceiling (W) | kWh per month at that ceiling | Cost per month at 18.19 cents | Cost per year at 18.19 cents |
|---|---|---|---|---|---|
| Sundance Stream 13 | 964 | 406 | 296 | $54 | $647 |
| Endless Pools R220 | 1,080 | 435 | 317 | $58 | $693 |
| Sundance Splash 12 | 1,233 | 471 | 344 | $63 | $751 |
| Aqua Living 12.6 ft Newporter | 1,300 | 487 | 355 | $65 | $775 |
| Endless Pools R200 | 1,335 | 495 | 361 | $66 | $788 |
| Aqua Living 12.6 ft Malibu | 1,600 | 553 | 404 | $73 | $881 |
| Aqua Living 12.6 ft Regatta | 1,600 | 553 | 404 | $73 | $881 |
| Endless Pools X500 | 1,650 | 564 | 411 | $75 | $898 |
| Aqua Living Catalina Monterey (14 ft) | 1,700 | 574 | 419 | $76 | $915 |
| Aqua Living Freestyle (14 ft) | 1,750 | 585 | 427 | $78 | $931 |
| Endless Pools E500 | 1,770 | 589 | 430 | $78 | $938 |
| Endless Pools R500 | 1,785 | 592 | 432 | $79 | $943 |
| Sundance Stream 17 | 1,929 | 621 | 453 | $82 | $990 |
| Sundance Surf 17 | 1,929 | 621 | 453 | $82 | $990 |
| Royal Spa Royal Swim Spa | 1,960 | 627 | 458 | $83 | $1,000 |
| Aqua Living Catalina (16 ft) | 2,000 | 635 | 464 | $84 | $1,012 |
| Endless Pools E700 | 2,150 | 665 | 485 | $88 | $1,059 |
| Endless Pools E2000 | 2,335 | 700 | 511 | $93 | $1,115 |
| Endless Pools X2000 | 2,350 | 703 | 513 | $93 | $1,120 |
| Endless Pools E550 | 2,392 | 711 | 519 | $94 | $1,132 |
Sources: 20 CCR 1605.3, Table G-5 (exercise spas: 3.75 x V^(2/3) + 40 W, V = fill volume in gallons, tested at a 22 F water-to-air difference); EIA Electric Power Monthly Table 5.6.B, US residential average January to July 2026 (released September 24, 2026). PC&S calculation at 730 hours a month. Download CSV
| Source | Published claim | Implied kWh per month at 18.19 cents | What the arithmetic shows |
|---|---|---|---|
| Endless Pools, July 30, 2026 | $50 to $100 a month for electricity | 275 to 550 | Brackets the Title 20 ceiling range of 296 to 519 kWh |
| Sundance Spas, 2026 (Costco article) | $50 to $100 average; $30 to $50 for its insulated models | 165 to 550 | Low end sits under every ceiling in the model table |
| Sundance Spas, 2026 (pricing article) | $20 to $50 for a small swim spa | 110 to 275 | Below the 296 kWh ceiling of the smallest model |
| Michael Phelps Swim Spa, March 12, 2025 | Less than $60 a month, from the maker energy calculator | Under 330 | Inside the ceiling range |
| Jacuzzi electrical guide, undated | 2 to 6 kWh; $150 to $300 a month | 825 to 1,649 | 2 to 6 kWh a day would be 60 to 180 kWh a month, or $11 to $33 |
| CA Title 20 ceiling, 20 models | 406 to 711 W standby at test conditions | 296 to 519 | PC&S calculation; $54 to $94 a month |
Sources: Endless Pools, Sundance (Costco article), Sundance (pricing article), Michael Phelps Swim Spa, Jacuzzi electrical guide, Title 20; PC&S arithmetic. Download CSV
The Title 20 figure is a legal ceiling at test conditions, not a meter reading. A swim spa in a 30 F winter holds a much wider water-to-air gap than the 22 F test, so cold-climate bills can pass the ceiling, and a well-insulated model can sit under it. It still gives a model-by-model yardstick that no maker claim offers. Set against a hot tub on the same certified basis, the median swim spa idles at 432 W versus 187 W, as our hot tub vs swim spa comparison shows.
For comparison, the average US electric-heated hot tub used 1,997 kWh a year in EIA’s 2020 survey, about $363 a year at 2026 prices, as tabulated in our homes with hot tubs study. The standby ceilings here run 3,556 to 6,226 kWh a year, 1.8 to 3.1 times that hot tub average, because a swim spa holds 964 to 2,392 gallons. Standby watts for 1,133 certified standard hot tubs by size and voltage are compared in our hot tub electricity cost guide.
Are swim spas worth the money compared with a pool?
A swim spa is worth the money when the yard cannot fit a 40 ft lap pool or the budget cannot reach a new in-ground pool. The 20 published swim spa prices start at $24,599, while 2025 permit-declared values for new in-ground pools ran from a $35,000 median in Los Angeles to $150,000 in Raleigh, and Angi puts the average lap pool at $44,000.
| Option | Price | Space | Energy | Source |
|---|---|---|---|---|
| Swim spa, 20 published models | $24,599 to $74,999 MSRP, plus $5,000 to $20,000+ to install | 12 to 20 ft long, 89 to 94 in wide | Standby ceiling 3,556 to 6,226 kWh a year | Maker pages; Endless Pools; CA Title 20 |
| Lap pool | $44,000 average; about $45,000 for a 40 ft pool | Typically 8 x 40 ft, 4 ft deep | Pool pump plus heater, if heated | Angi lap pool cost guide |
| New in-ground pool, permit-declared | Median $35,000 (Los Angeles) to $150,000 (Raleigh), 2025 | Varies | Pool pump plus heater, if heated | PC&S permit-value research |
| Electric hot tub | See the hot tub cost guide | About 7 x 7 ft class | 1,997 kWh a year on average (2020) | EIA RECS via PC&S research |
Sources: maker price pages (2026-10-19); Endless Pools; Angi lap pool cost guide; PC&S permit-value research; PC&S hot tub research (EIA RECS 2020); Title 20. Download CSV
Space is the strongest argument. The longest swim spa in the table is 20 ft, while Angi describes the typical lap pool as 8 by 40 ft and 4 ft deep; the costs and permit records for that format are in our lap pool cost guide. For a small in-ground pool built for cooling off rather than swimming, compare our plunge pool cost guide. For a chilled tub rather than a pool, our cold plunge cost guide prices 12 setups from $1,149.99 to $12,799.
The 2024 International Swimming Pool and Spa Code defines an “exercise spa (also known as a swim spa)” as a spa built to produce a water flow for swimming in place (ISPSC 2024 Chapter 2). Under ISPSC Section 305.1, spas with a lockable safety cover complying with ASTM F1346 are not required to meet the barrier rules, which can save a fence that an in-ground pool would need (ISPSC 2024 Section 305.1). Confirm the local adoption first.
Lender options for spas and pools, with dated rates, are in our pool financing guide.
Which swim spa setup fits your yard and budget?
Four site answers set most of the installed swim spa cost: whether it sits on a deck or the ground, whether the shell fits through the side yard, whether the panel has room for a 30 to 60 A circuit, and whether you need a training current. Each answer below carries the threshold and the published dollar effect.
| If your situation is | Do this |
|---|---|
| The spa will sit on a raised wood deck | Get a structural engineer to check it: the 20 models here load 103 to 200 lb per sq ft, against the 40 lb per sq ft live load IRC Table R301.5 sets for decks, and Endless Pools asks for a deck rated above 250 lb per sq ft |
| The spa will sit on the ground outdoors | Pour a reinforced concrete pad at least 6 in thick (Endless Pools PDI) and budget $6 to $12 per sq ft (HomeGuide, 2023) |
| The side yard or gate is narrower than the shell (89 to 94 in here) plus working room | Price a crane: $1,000 to $5,000+ (Endless Pools, 2026) |
| The model calls for a 60 A circuit and the panel has no spare space | Ask the electrician for a load calculation and a quote for a subpanel ($400 to $1,500, HomeGuide 2023) or a panel upgrade ($1,000 to $5,000+, Endless Pools 2026) |
| You want unit price under $30,000 | Shortlist the 8 of 20 models listed under $30,000, then add $5,000 to $20,000+ for installation |
| You want swim training against a smooth current | Compare current systems, not jet counts: Endless Pools current-driven E models start at $55,999 against $26,499 for its jetted R200 |
| You want hot-tub water and swim water at once | Look at 2-zone models such as Endless Pools X2000 ($59,999) and E2000 ($74,999) |
| Your yard has 40 ft or more of flat length | Price a lap pool as well: Angi puts the average at $44,000 |
Sources: IRC 2021 Table R301.5, Endless Pools PDI, Endless Pools cost guide (July 30, 2026), HomeGuide (October 13, 2023), maker price pages (2026-10-19), Angi. Download CSV

Where the plan grows into a built-in spa next to a pool, the build method, codes and costs change; those are covered in our spa construction guide. For a full in-ground pool budget, start with our inground pool cost guide.
How we compiled this
We opened 20 maker model pages and spec sheets from Endless Pools, Sundance Spas, Royal Spa and Aqua Living Factory Outlets on October 19, 2026 and transcribed price, size, gallons, dry weight and circuit size for every model that showed a price. Code rules come from IRC 2021, ISPSC 2024, California Title 20 and a city page quoting NEC Article 680; electricity prices from EIA. Loads and running costs are our arithmetic; we did not test, install or meter any swim spa, and we left out forum and owner-group posts.
Frequently Asked Questions
How much does it cost to get a swim spa?
Published prices for 20 swim spa models run $24,599 to $74,999 as of October 2026, with a median of $31,499. Endless Pools puts installation at $5,000 to $20,000 or more (Endless Pools, July 2026). Our worked example for a $28,595 Royal Swim Spa on a new pad totals $31,006 to $36,221 before decking.
How much is a swim spa at Costco?
We could not load a current swim spa listing on Costco.com on October 19, 2026. Sundance Spas, a competing maker, wrote in 2026 that most Costco swim spas fall between $10,000 and $25,000 before installation and that the pad, 50 A wiring and crane access add $2,000 to $5,000 or more (Sundance). Compare any listing’s gallons and circuit size with the model table.
How expensive is a swim spa to run?
California’s Title 20 caps standby power for these 20 swim spas at 406 to 711 W, which is $54 to $94 a month at the 18.19 cents per kWh US average for January to July 2026 (EIA). Swim sessions add pump and heater time. Endless Pools quotes $50 to $100 a month for electricity.
Are swim spas worth the money?
A swim spa costs less than most new in-ground pools when the yard is short: published prices start at $24,599, while 2025 permit-declared pool values ran from a $35,000 median in Los Angeles to $150,000 in Raleigh. It fits in 12 to 20 ft, against about 40 ft for a typical 8 by 40 ft lap pool (Angi).
Do you need a concrete slab for a swim spa?
For an outdoor install on the ground, yes in practice. Endless Pools requires a reinforced concrete pad at least 6 in thick or a deck rated above 250 lb per sq ft (Endless Pools PDI). The 20 models here load 103 to 200 lb per sq ft when filled, and HomeGuide prices a slab at $6 to $12 per sq ft.
How much do swim spas weigh?
Empty, the 20 swim spas here weigh 1,748 to 4,090 lb. Filled with 964 to 2,392 gallons of water at 8.34 lb per gallon, they weigh 9,788 to 23,564 lb before occupants, from the 12 ft Sundance Stream 13 to the 20 ft Endless Pools E2000 (maker spec sheets, October 2026).
What is the 5 foot rule for hot tubs?
The disconnect for a spa or hot tub must be within sight of it and at least 5 ft horizontally from the inside wall, and metal within 5 ft must be bonded, under NEC Article 680 as quoted by West Valley City, Utah (680.12 and 680.43). Master Spas repeats the 5 ft disconnect rule for its 50 A swim spas.
Sources
- Endless Pools. How Much Does a Swim Spa Cost? Complete Pricing Guide (published July 30, 2026). Accessed 2026-10-19.
- Endless Pools (Watkins Manufacturing). Pre-Delivery Instructions, System Specifications (page 9). Accessed 2026-10-19.
- Endless Pools. Swim spa model pages: R200, X500, E500, E2000. Accessed 2026-10-19.
- Sundance Spas. Costco Swim Spa: Prices, Pros and Cons (2026), with MSRP model cards. Accessed 2026-10-19.
- Sundance Spas. Swim Spa Pricing in 2026: What You Need to Know. Accessed 2026-10-19.
- Sundance Spas. Sundance Splash 12, Stream 13, Stream 17 and Surf 17 specifications. Accessed 2026-10-19.
- Royal Spa. Royal Swim Spa product page. Accessed 2026-10-19.
- Aqua Living Factory Outlets. Swim Series price list and model pages. Accessed 2026-10-19.
- HomeGuide. How Much Does a Swim Spa Cost? (written October 13, 2023). Accessed 2026-10-19.
- Jacuzzi. Swim Spa Prices: Your Complete Cost Guide for 2025. Accessed 2026-10-19.
- Jacuzzi. Guide to Swim Spa Electrical Requirements. Accessed 2026-10-19.
- Jacuzzi. Browse All Swim Spas (price tiers). Accessed 2026-10-19.
- Bullfrog Spas. How Much Do Swim Spas Cost? (August 17, 2021). Accessed 2026-10-19.
- Michael Phelps Swim Spa (Master Spas). Swim spa cost breakdown (March 12, 2025). Accessed 2026-10-19.
- Master Spas. Electrical Requirements, 240V 50A GFCI configuration (2023). Accessed 2026-10-19.
- International Code Council via UpCodes. IRC 2021 Chapter 3, Table R301.5 Minimum Uniformly Distributed Live Loads. Accessed 2026-10-19.
- International Code Council via UpCodes. ISPSC 2024 Chapter 2, Definitions (Exercise Spa). Accessed 2026-10-19.
- International Code Council via UpCodes. ISPSC 2024 Chapter 3, Section 305.1 Barriers. Accessed 2026-10-19.
- West Valley City, Utah. Hot Tub Rules (quoting NEC Article 680). Accessed 2026-10-19.
- California Energy Commission via Cornell LII. 20 CCR 1605.3, Table G-5 Standards for Portable Electric Spas. Accessed 2026-10-19.
- U.S. Energy Information Administration. Electric Power Monthly Table 5.6.B (data for July 2026, released September 24, 2026). Accessed 2026-10-19.
- U.S. Energy Information Administration. British thermal units (Btu). Accessed 2026-10-19.
- U.S. Geological Survey. Water Density. Accessed 2026-10-19.
- U.S. Geological Survey. Water Science Glossary (7.48 gallons per cubic foot). Accessed 2026-10-19.
- U.S. Energy Information Administration. Residential Energy Consumption Survey 2020, hot tub end use (via PC&S homes with hot tubs study). Accessed 2026-10-07.
- PC&S research. Average cost to build a pool: permit-declared values (Los Angeles and Raleigh open data). Accessed 2026-10-07.
- Angi. How Much Does a Lap Pool Cost? (Wayback capture June 21, 2025 of the April 29, 2025 update). Accessed 2026-10-19.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.