Skip to content
Square hot tub with a closed cover on a new concrete pad in a backyard
Hot tub planning guide

Hot Tub Weight: Empty, Filled and Per Square Foot, With Pad and Deck Rules

Hot tub weight runs 500 to 1,240 lb empty and 2,570 to 6,852 lb filled with a 175 lb adult per seat across 30 current models, or 71 to 130 lb per square foot against a 40 psf deck.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓30 models, one load tableGallons, dry weight, filled weight and lb per sq ft for every current Hot Spring model and 11 Sundance models.
  • ✓Deck or pad, by the numbersIRC Table R301.5 sets 40 psf for decks; Hot Spring rates its tubs at 95 to 130 lb per sq ft.
  • ✓Foundation rules from the makersA 4 in reinforced pad, level within 1/4 to 1/2 in, and when an engineer is required.
Quick answer
Across 30 current Hot Spring and Sundance models, hot tubs weigh 500 to 1,240 lb empty and 2,570 to 6,852 lb filled with 175 lb per seat. Hot Spring rates them at 95 to 130 lb per square foot, far above the 40 psf IRC deck live load, so they belong on a 4 in reinforced pad.
500 to 1,240 lb
Empty weight
2,570 to 6,852 lb
Filled, 175 lb per seat
40 lb per sq ft
Code deck live load

Key takeaways

  • Hot tubs in the Hot Spring and Sundance lineups as of October 2026 hold 190 to 525 gallons and weigh 500 to 1,240 lb empty.
  • Water weighs 8.34 lb per gallon (USGS: 62.366 lb per cubic foot at 60 F), so a 455 gallon tub carries 3,794.7 lb of water before anyone gets in.
  • Hot Spring counts an adult weighing 175 lb in every seat in its filled weights; Sundance and the 2017 Jacuzzi specification handbook list water and shell only.
  • IRC 2021 Table R301.5 sets a 40 lb per sq ft live load for decks, while Hot Spring’s pre-delivery instructions list 95 to 130 lb per sq ft of dead weight for its 19 models.
  • Bullfrog Spas, Hot Spring and Sundance all call for a concrete pad at least 4 in thick; Hot Spring requires one under the Grandee and Envoy.

How much does a hot tub weigh?

Hot tub weight is 500 to 1,240 lb empty and 2,570 to 6,852 lb filled with a 175 lb adult in every seat, across 30 current models from Hot Spring and Sundance. A 2 to 3 seat tub fills to 2,570 to 3,125 lb; a 6 to 7 seat tub to 4,664 to 6,795 lb. Water is most of it: 190 to 525 gallons at 8.34 lb per gallon.

Hot tub weight: the key numbers, United States, October 2026.
NumberWhat it meansSource
500 to 1,240 lbEmpty (dry) weight of 30 current Hot Spring and Sundance hot tubsMaker spec pages, October 2026
190 to 525 gallonsWater capacity across the same 30 modelsMaker spec pages
8.34 lbWeight of one gallon of water (62.366 lb per cu ft / 7.48 gal per cu ft)USGS
175 lb per seatOccupant allowance Hot Spring adds to its filled weightsHot Spring spec pages and pre-delivery instructions
2,570 to 6,852 lbFilled weight with a 175 lb adult in every seatHot Spring spec pages; PC&S calculation for Sundance
95 to 130 lb per sq ftDead weight per square foot Hot Spring lists for its 19 modelsHot Spring pre-delivery instructions
40 lb per sq ftMinimum live load for decksIRC 2021 Table R301.5
4 inMinimum reinforced concrete pad thickness in Hot Spring, Bullfrog and Sundance guidanceMaker installation guides

Sources: Hot Spring spec pages; Sundance spec pages; USGS water density; Hot Spring pre-delivery instructions; IRC 2021 Table R301.5; Bullfrog Spas. Accessed 2026-10-26. Download CSV

Hot tub weight by seat count: range across 30 models, empty and filled with 175 lb per seat.
SeatsModelsGallonsEmpty weight (lb)Filled with 175 lb per seat (lb)Lb per sq ft of footprint
2 to 3 seats7190 to 250500 to 6602,570 to 3,12571 to 80
4 to 5 seats8270 to 455575 to 8383,705 to 5,45581 to 91
6 to 7 seats14330 to 525710 to 1,2154,664 to 6,79588 to 108
8 seats15051,2406,852101

Sources: Hot Spring and Sundance spec pages (model year 2026), accessed 2026-10-26. Sundance filled weights with occupants are PC&S calculations. Download CSV

Filled hot tub weight by seat count, 30 models (lb, with 175 lb per seat)
Filled hot tub weight by seat count, 30 models (lb, with 175 lb per seat)Range chart: 2 to 3 seat hot tubs weigh 2,570 to 3,125 lb filled, 4 to 5 seats 3,705 to 5,455 lb, 6 to 7 seats 4,664 to 6,795 lb, and the one 8 seat model 6,852 lb.02,0004,0006,0008,0002 to 3 seats: 2,570 to 3,1252 to 3 seats4 to 5 seats: 3,705 to 5,4554 to 5 seats6 to 7 seats: 4,664 to 6,7956 to 7 seats8 seats: 6,852 to 6,8528 seats

Filled weight = dry weight + gallons x 8.34 + 175 lb per seat.

Source: Hot Spring and Sundance spec pages, accessed 2026-10-26; Sundance totals are PC&S calculations. Download chart data (CSV)

How much does a 7 ft by 7 ft hot tub weigh? Four Hot Spring models measure 84 x 84 in: the Relay, Rhythm, Flair and Flash list 4,715 to 5,070 lb filled, counting 6 or 7 adults at 175 lb. The 84 x 84 in Sundance Edison lists 3,614 lb, which is water and shell only; add 6 adults and it reaches 4,664 lb.

How much does a 4 person hot tub weigh with water? The 4 seat Hot Spring Limelight Beam holds 295 gallons, weighs 700 lb empty and 3,860 lb filled with 4 adults. Across the 4 to 5 seat models in our table the range is 3,705 to 5,455 lb. Our homes with hot tubs study counts 10.1 million US homes with one in 2024.

How do you calculate a hot tub's filled weight?

Multiply the gallons by 8.34 lb, add the dry weight, then add 175 lb for every seat. For the 455 gallon, 7 seat Hot Spring Grandee that is 3,794.7 + 790 + 1,225 = 5,809.7 lb, which matches the 5,810 lb Hot Spring lists. Divide by the footprint in square feet for the load per square foot.

Worked example: filled weight and load per square foot for the Hot Spring Grandee.
StepInputResultSource
Water455 gallons x 8.34 lb per gallon3,794.7 lbHot Spring spec page; USGS water density
Add dry weight3,794.7 + 790 lb4,584.7 lbHot Spring spec page
Add 7 adults at 175 lb4,584.7 + 1,225 lb5,809.7 lbHot Spring lists 5,810 lb filled
Footprint100 in x 91 in / 14463.2 sq ftHot Spring Highlife pre-delivery instructions
Load over the full footprint5,810 / 63.291.9 lb per sq ftPC&S calculation
Hot Spring's dead weight figureSpec chart125 lb per sq ftHot Spring Highlife pre-delivery instructions
Bearing area that 125 implies5,810 / 12546.5 sq ft, 74% of the footprintPC&S calculation
Compare with a code-minimum deck125 / 403.1 times the deck live loadIRC 2021 Table R301.5

Sources: Hot Spring Grandee specifications; Hot Spring Highlife pre-delivery instructions; USGS; IRC 2021 Table R301.5. Arithmetic by PC&S. Download CSV

Hot Spring Grandee worked example: 455 gallons at 8.34 lb plus 790 lb dry weight plus 7 adults at 175 lb is 5,810 lb, 91.9 lb per sq ft over the 63.2 sq ft footprint and 125 lb per sq ft by Hot Spring's own chart, against a 40 psf deck (Hot Spring; USGS; IRC 2021 Table R301.5).
Hot Spring Grandee worked example: 455 gallons at 8.34 lb plus 790 lb dry weight plus 7 adults at 175 lb is 5,810 lb, 91.9 lb per sq ft over the 63.2 sq ft footprint and 125 lb per sq ft by Hot Spring’s own chart, against a 40 psf deck (Hot Spring; USGS; IRC 2021 Table R301.5).

“Filled weight” does not mean the same thing at every maker. Hot Spring’s figure includes an adult weighing 175 lb for every seat. Sundance’s 2026 pages, the 2017 Jacuzzi handbook and the Arctic Spas Kodiak spec page (3,828 lb wet from 342 gallons and 973 lb dry) list water and shell only. The Jacuzzi handbook tells designers to add the occupant weight at maximum seating and the weight of any support decking.

Footprint arithmetic understates the load the makers design for. Hot Spring’s 125 lb per sq ft for the Grandee equals 5,810 lb resting on 46.5 sq ft, 74% of the footprint; the guide does not say how the figure is derived. Endless Pools does the same for swim spas, as our swim spa cost guide shows. Design to the larger number.

Hot tub weight and load by model: 30 tubs compared

Every one of the 30 tubs loads its footprint at 1.8 to 3.25 times the 40 psf a code deck is built for. Hot Spring publishes its own dead weight figure, 95 lb per sq ft for the 2 seat TX up to 130 for the Vanguard and Pulse. For Sundance we divide water, shell and 175 lb per seat by length times width: 72 to 101 lb per sq ft.

Hot tub weight and load per square foot for 30 current models, sorted by design load, with the maker document for each row.
ModelSeatsFootprint (in)Sq ftGallonsDry weight (lb)Water at 8.34 lb/gal (lb)Filled with 175 lb per seat (lb)Maker-stated filled weight (lb)Lb per sq ft of footprintMaker dead weight (lb per sq ft)Times the 40 psf deck loadSource
Hot Spring Highlife Vanguard687 x 8752.63757103,1284,8904,890931303.25https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Limelight Pulse789 x 8955.04451,0153,7115,9505,9501081303.25https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf
Hot Spring Highlife Grandee7100 x 9163.24557903,7955,8105,810921253.12https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Highlife Aria587 x 8752.63656803,0444,6004,600881253.12https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Highlife Prodigy584 x 7845.52705752,2523,7053,705811253.12https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Limelight Flash784 x 8449.03608453,0025,0705,0701031253.12https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf
Hot Spring Hot Spot Rhythm784 x 8449.03308452,7524,8204,820981253.12https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf
Hot Spring Highlife Envoy5100 x 9163.24557853,7955,4555,455861203.00https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Limelight Prism7110 x 9169.55251,1904,3786,7956,795981203.00https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf
Hot Spring Limelight Flair684 x 8449.03358752,7944,7204,720961203.00https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf
Hot Spring Hot Spot Relay684 x 8449.03408302,8364,7154,715961203.00https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf
Hot Spring Highlife Sovereign580 x 9351.73306002,7524,2304,230821152.88https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Highlife Jetsetter LX384 x 6839.72505152,0853,1253,125791152.88https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Highlife Jetsetter384 x 6839.72455002,0433,0703,070771152.88https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Hot Spring Hot Spot Pace582 x 8246.73007752,5024,1504,150891152.88https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf
Hot Spring Limelight Beam480 x 8044.42957002,4603,8603,860871102.75https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf
Hot Spring Hot Spot SX372 x 7738.52306451,9183,0903,090801052.62https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf
Sundance Aspen8110 x 8968.05051,2404,2126,8525,452 (no occupants stated)101Not published2.52https://www.sundancespas.com/products/aspen-my26
Hot Spring Hot Spot Stride384 x 6537.92255701,8762,9752,975781002.50https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf
Sundance Chelsee789 x 8955.04008733,3365,4345,210 (no occupants stated)99Not published2.47https://www.sundancespas.com/products/chelsee-my26
Sundance Edison684 x 8449.03457372,8774,6643,614 (no occupants stated)95Not published2.38https://www.sundancespas.com/products/edison-my26
Hot Spring Hot Spot TX272 x 7236.01906351,5852,5702,57071952.38https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf
Sundance Hamilton689 x 8955.03938263,2785,1544,996 (no occupants stated)94Not published2.34https://www.sundancespas.com/products/hamilton-my26
Sundance Optima789 x 8955.03559442,9615,1303,905 (no occupants stated)93Not published2.33https://www.sundancespas.com/products/optima-my26
Sundance Montclair591 x 7446.83107902,5854,2504,251 (no occupants stated)91Not published2.27https://www.sundancespas.com/products/montclair-my26
Sundance Kingston7100 x 9263.94011,2153,3445,7844,392 (no occupants stated)91Not published2.26https://www.sundancespas.com/products/kingston-my26
Sundance Cameo689 x 8955.03508892,9194,8583,808 (no occupants stated)88Not published2.21https://www.sundancespas.com/products/cameo-my26
Sundance Marin591 x 7648.02958382,4604,1733,298 (no occupants stated)87Not published2.17https://www.sundancespas.com/products/marin-my26
Sundance Dover382 x 6939.32306201,9183,0633,247 (no occupants stated)78Not published1.95https://www.sundancespas.com/products/dover-my26
Sundance Capri382 x 6939.31956601,6262,8112,286 (no occupants stated)72Not published1.79https://www.sundancespas.com/products/capri-my26

Sources: Hot Spring Highlife, Limelight and Hot Spot pre-delivery instructions and spec pages; Sundance 2026 spec pages (Aspen, Optima and others linked in the CSV); water at 8.34 lb per gallon from USGS. Loads are PC&S calculations. Accessed 2026-10-26. Download CSV

Hot tub load per square foot, 30 models, against a 40 psf deckHot Spring: maker dead weight figure. Sundance: filled weight with 175 lb per seat over the footprint.
Hot tub load per square foot, 30 models, against a 40 psf deckBar chart: Hot Spring Vanguard and Limelight Pulse lead at 130 lb per sq ft and the Sundance Capri is lowest at 72; every one of the 30 hot tubs exceeds the 40 lb per sq ft live load the IRC sets for decks.HS Highlife Vanguard: 130HS Highlife Vanguard130HS Limelight Pulse: 130HS Limelight Pulse130HS Highlife Grandee: 125HS Highlife Grandee125HS Highlife Aria: 125HS Highlife Aria125HS Highlife Prodigy: 125HS Highlife Prodigy125HS Limelight Flash: 125HS Limelight Flash125HS Hot Spot Rhythm: 125HS Hot Spot Rhythm125HS Highlife Envoy: 120HS Highlife Envoy120HS Limelight Prism: 120HS Limelight Prism120HS Limelight Flair: 120HS Limelight Flair120HS Hot Spot Relay: 120HS Hot Spot Relay120HS Highlife Sovereign: 115HS Highlife Sovereign115HS Highlife Jetsetter LX: 115HS Highlife Jetsetter LX115HS Highlife Jetsetter: 115HS Highlife Jetsetter115HS Hot Spot Pace: 115HS Hot Spot Pace115HS Limelight Beam: 110HS Limelight Beam110HS Hot Spot SX: 105HS Hot Spot SX105Sundance Aspen: 101Sundance Aspen101HS Hot Spot Stride: 100HS Hot Spot Stride100Sundance Chelsee: 99Sundance Chelsee99Sundance Edison: 95Sundance Edison95HS Hot Spot TX: 95HS Hot Spot TX95Sundance Hamilton: 94Sundance Hamilton94Sundance Optima: 93Sundance Optima93Sundance Montclair: 91Sundance Montclair91Sundance Kingston: 91Sundance Kingston91Sundance Cameo: 88Sundance Cameo88Sundance Marin: 87Sundance Marin87Sundance Dover: 78Sundance Dover78Sundance Capri: 72Sundance Capri72

IRC 2021 Table R301.5 sets a 40 psf live load for decks; every model here is 1.8 to 3.25 times that.

Source: Hot Spring pre-delivery instructions (2025 files) and Sundance spec pages, accessed 2026-10-26; PC&S calculation for Sundance. Download chart data (CSV)

Hot Spring's Highlife spec chart lists dry, filled and dead weight per model; the footnote says filled and dead weight include occupants at 175 lb, and the caution line suggests an engineer before an raised deck (Highlife Pre-Delivery Instructions, page 17, accessed 2026-10-26).
Hot Spring’s Highlife spec chart lists dry, filled and dead weight per model; the footnote says filled and dead weight include occupants at 175 lb, and the caution line suggests an engineer before an raised deck (Highlife Pre-Delivery Instructions, page 17, accessed 2026-10-26).

Can a deck hold a hot tub?

Not a deck built only to code minimums. IRC Table R301.5 sets 40 lb per sq ft of live load for decks, and the AWC DCA 6 deck guide adds 10 psf of dead load but says decks supporting hot tubs are beyond its scope. Hot Spring allows a deck rated above the tub’s dead weight, 95 to 130 lb per sq ft, once a contractor or engineer checks it. Framing, footing math and permit rules for a deck that can carry one are in our guide to a hot tub on deck.

Deck design loads compared with hot tub loads, each with its source.
Rule or ratingLoadWhat it coversSource
IRC 2021 Table R301.5, balconies (exterior) and decks40 lb per sq ft live loadMinimum uniformly distributed live load for a code deckInternational Code Council via UpCodes
AWC DCA 6 prescriptive deck guide40 lb per sq ft live + 10 lb per sq ft deadIts span tables; decks supporting hot tubs are outside its scopeAmerican Wood Council DCA 6 (2015)
Hot Spring Hot Spot TX (2 seats)95 lb per sq ft dead weightLowest figure in the Hot Spring spec chartsHot Spring Hot Spot pre-delivery instructions
Hot Spring Grandee (7 seats)125 lb per sq ft dead weightDeck must withstand more than this, or a 4 in reinforced padHot Spring Highlife pre-delivery instructions
Hot Spring Vanguard and Limelight Pulse130 lb per sq ft dead weightHighest figure in the Hot Spring spec chartsHot Spring pre-delivery instructions
30 models, full footprint arithmetic71 to 108 lb per sq ftFilled weight with 175 lb per seat divided by length x widthPC&S calculation from maker specs

Sources: IRC 2021 Table R301.5; AWC DCA 6 (2015); Hot Spot and Highlife pre-delivery instructions; PC&S calculations. Accessed 2026-10-26. Download CSV

Hot Spring’s Highlife pre-delivery instructions say to consult a qualified building contractor or structural engineer before placing a spa on an raised deck or indoors, and that the weight per square foot must not exceed the structure’s rated capacity. Bullfrog Spas gives the same advice for adding a tub to an existing deck. Ask the engineer for the deck’s rated load in lb per sq ft and compare it with the dead weight figure for your model.

Deck builders who work around pools and spas are listed through our pool deck contractors page, and whether the deck or pad needs its own permit is covered in our guide to pool permits.

What foundation does a hot tub need?

A reinforced concrete pad at least 4 in thick, by Hot Spring, Bullfrog and Sundance guidance, with the rebar or mesh tied to a bond wire. Keep it level: Sundance wants 1/4 in across the footprint and Bullfrog no more than 1/2 in in 8 ft. Bullfrog and Sundance also list pavers or compacted gravel, but Hot Spring requires concrete under its Grandee and Envoy.

Hot tub foundation rules from four maker sources and the IRC concrete strength table.
SourceConcrete padLevel or slopeDeckOther surfacesSource link
Hot Spring Highlife pre-delivery instructionsReinforced, at least 4 in; required for Grandee and Envoy, recommended for the rest; rebar or mesh tied to a bond wireSlope 1/2 in per 10 ft preferred; no shims or point levelingLoad capacity greater than the spa's dead weight; consult a contractor or structural engineerBrick or wood decking under the entire spahttps://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf
Bullfrog SpasAt least 4 in, reinforced with rebar or mesh tied to a bond wire; 6 in or more for heavier tubs and swim spasNo more than 1/2 in in an 8 ft run; no shimsConsult a structural engineer for an existing deckPavers, pea gravel, crushed rock of 1.5 in or morehttps://www.bullfrogspas.com/hot-tub-foundation/
Sundance SpasPoured concrete at least 4 in thickLevel within 1/4 in across the footprintReinforced decking built for the loadCompacted gravel with drainagehttps://www.sundancespas.com/products/optima-my26
Jacuzzi4 to 6 in, reinforced with rebar or wire meshNot statedSpecial engineering, permits and inspections to build a tub into a deckGravel or prefabricated padshttps://www.jacuzzi.com/en-us/Hot-Tub-Pads.html
IRC 2021 Table R402.22,500, 3,000 or 3,500 psi at 28 days for porch and carport slabs exposed to weather, by weathering potentialNot coveredNot coveredAir entrainment of 5% to 7% where weathering is moderate or severehttps://up.codes/viewer/austin/irc-2021/chapter/4/foundations

Sources: Hot Spring; Bullfrog Spas; Sundance Spas; Jacuzzi; IRC 2021 Table R402.2. Accessed 2026-10-26. Download CSV

None of the maker guides we read names a concrete strength. The closest code row is IRC 2021 Table R402.2, which sets 2,500 psi at 28 days for porch and carport slabs exposed to weather where weathering is negligible, 3,000 psi where it is moderate and 3,500 psi where it is severe, air-entrained at 5% to 7%. Ask the concrete contractor which column your county uses.

Worked example: a 9 x 9 ft, 4 in pad for a Hot Spring Grandee.
StepInputResultSource
Tub footprintHot Spring Grandee, 100 x 91 in8.3 x 7.6 ftHot Spring Highlife pre-delivery instructions
Pad size9 x 9 ft81 sq ftPC&S example
Concrete at 4 in thick1 cubic yard covers 81 sq ft at 4 in1 cubic yardHomeGuide, February 3, 2026
Installed cost, low81 sq ft x $6$486HomeGuide slab cost, $6 to $12 per sq ft
Installed cost, high81 sq ft x $12$972HomeGuide slab cost

Sources: HomeGuide concrete slab cost (February 3, 2026); Hot Spring Highlife pre-delivery instructions. Arithmetic by PC&S. Download CSV

The bond wire is an electrical requirement, not a structural one: Hot Spring and Bullfrog both tie the pad’s reinforcing to it for grounding. Our pool electrocution statistics report counts 33 CPSC-recorded electrocution deaths in US pools and spas from 2002 to 2018. Full install budgets, wiring included, are in our hot tub cost guide.

Are hot tubs heavy to move?

Yes. Even empty, the 30 tubs here weigh 500 to 1,240 lb, so drain one before moving it. Hot Spring dealers roll tubs on their side on a delivery cart, which needs a path at least 33 to 38 in wide for its Highlife models, or the cart’s width if greater, and Hot Spring says about ten percent of installs need a crane to lift the tub over a house or wall. Gate and overhead clearances for nine models, plus cover lifter space, are worked out in our hot tub dimensions guide.

Delivery dimensions of four Hot Spring Highlife tubs on their side, with empty weight.
Model (on its side)Width WLength LHeight HEmpty weight (lb)Source
Hot Spring Grandee38 in100 in91 in790Hot Spring Highlife pre-delivery instructions
Hot Spring Vanguard36 in87 in87 in710Hot Spring Highlife pre-delivery instructions
Hot Spring Sovereign33 in93 in80 in600Hot Spring Highlife pre-delivery instructions
Hot Spring Jetsetter33 in84 in68 in500Hot Spring Highlife pre-delivery instructions

Source: Hot Spring Highlife pre-delivery instructions, Delivery Access chart; empty weights from Hot Spring spec pages. Accessed 2026-10-26. Download CSV

How many people does it take to lift a hot tub? No maker we read gives a headcount, because none lifts by hand. Bullfrog says most spas move on a dolly or slip sheet, never resting weight on the equipment door, and Hot Spring allows no more than 6 consecutive stairs without a landing on the delivery path. Empty it first; our guide on how to drain a hot tub has drain times by tub size.

Where can you put a hot tub, and what does the spot need?

On the ground, a 4 in reinforced pad handles every tub in our table. On an existing deck, nothing goes in until an engineer confirms a rating above the tub’s dead weight, 95 to 130 lb per sq ft for Hot Spring. Balconies, rooftops and indoor floors always need an engineer, and anything sized for swimming follows swim spa rules.

Deck or pad: a ground-level tub goes on a 4 in reinforced pad; any deck, balcony, rooftop or indoor floor needs a rating above the tub's dead weight, 95 to 130 lb per sq ft for Hot Spring, confirmed by an engineer, because a code deck is designed for 40 psf (Hot Spring; IRC 2021 Table R301.5; AWC DCA 6).
Deck or pad: a ground-level tub goes on a 4 in reinforced pad; any deck, balcony, rooftop or indoor floor needs a rating above the tub’s dead weight, 95 to 130 lb per sq ft for Hot Spring, confirmed by an engineer, because a code deck is designed for 40 psf (Hot Spring; IRC 2021 Table R301.5; AWC DCA 6).
Decision table: where a hot tub can go and what each location needs.
If your situation isDo thisWhy (source)
Ground-level install, any tub in the model tablePour a reinforced concrete pad at least 4 in thick, rebar or mesh tied to a bond wireHot Spring, Bullfrog and Sundance guidance
Hot Spring Grandee or Envoy outdoorsA 4 in reinforced pad is required, not optionalHot Spring Highlife pre-delivery instructions
Existing deck built to code minimumsDo not place the tub until an engineer checks it: 40 psf live load against 95 to 130 lb per sq ftIRC Table R301.5; Hot Spring spec charts
New deck designed from the AWC DCA 6 tablesHave the hot tub area engineered separatelyDCA 6 puts decks supporting hot tubs outside its scope
Balcony, rooftop or indoor floorHire a structural engineer before buyingHot Spring: consult a contractor or engineer for raised decks and indoors
Pavers or gravel instead of concreteCompact the base and keep it within 1/2 in of level over 8 ftBullfrog Spas
Cold-climate slab exposed to weatherAsk for 3,500 psi air-entrained concreteIRC Table R402.2, severe weathering column
Tub is longer than 12 ft or meant for swimmingUse swim spa rules: 6 in reinforced slabEndless Pools via PC&S swim spa cost guide

Sources: Hot Spring; Bullfrog Spas; Sundance; IRC Table R301.5; IRC Table R402.2; AWC DCA 6; PC&S swim spa cost guide. Download CSV

Built-in spas avoid the question by sharing the pool’s structure; our spa construction guide covers what a poured spa costs and how it is built.

How we compiled this

In October 2026 we opened 30 maker spec pages (19 Hot Spring, 11 Sundance), Hot Spring’s three 2025 pre-delivery instruction files, the 2017 Jacuzzi specification handbook, Bullfrog and Jacuzzi foundation pages, IRC 2021 Tables R301.5 and R402.2, the AWC DCA 6 deck guide, USGS water density data and HomeGuide’s slab prices. Loads are our arithmetic; we did not weigh, install or load-test any tub, and we left out forum posts and dealer estimates.

Frequently Asked Questions

How heavy is a typical hot tub?

Across 30 current Hot Spring and Sundance models, a hot tub weighs 500 to 1,240 lb empty and 2,570 to 6,852 lb filled with a 175 lb adult in every seat. A 6 to 7 seat tub, the most common size in our table, fills to 4,664 to 6,795 lb. Water is the bulk of it at 8.34 lb per gallon (USGS).

How much does a 7 ft by 7 ft hot tub weigh?

Hot Spring’s four 84 x 84 in models, the Relay, Rhythm, Flair and Flash, list 4,715 to 5,070 lb filled, counting 6 or 7 adults at 175 lb each. The 84 x 84 in Sundance Edison lists 3,614 lb for water and shell alone, or 4,664 lb with 6 adults. Empty, these tubs weigh 737 to 875 lb.

How much does a hot tub weigh per square foot?

Hot Spring lists 95 to 130 lb per square foot of dead weight for its 19 models, occupants included. Dividing filled weight by length times width gives less, 71 to 108 lb per square foot across our 30 models, because makers assume a smaller bearing area. Either figure is two to three times the 40 psf live load in IRC Table R301.5.

Are hot tubs heavy to move?

Yes. Empty tubs in our table weigh 500 to 1,240 lb, so they move on a dolly, cart or slip sheet rather than by hand (Bullfrog). Hot Spring delivers on a cart with the tub on its side, needs a path at least 33 to 38 in wide for Highlife models and says about ten percent of installs need a crane. Drain the tub before any move. What movers charge for that job, from $200 in the same yard to over $5,000 long distance, is in our guide on how much it costs to move a hot tub.

How many people does it take to lift a hot tub?

Makers do not lift tubs by hand, so none publishes a headcount. An empty hot tub weighs 500 to 1,240 lb in our 30 model table. Bullfrog moves spas on a dolly or slip sheet and warns never to let the equipment door bear the weight; Hot Spring uses a delivery cart and limits the route to 6 stairs between landings.

How thick of a concrete slab do I need for a hot tub?

At least 4 in of reinforced concrete, by Hot Spring, Bullfrog and Sundance guidance, with the rebar or mesh tied to a bond wire. Bullfrog suggests 6 in or more for heavier tubs and swim spas, and Jacuzzi says 4 to 6 in. IRC Table R402.2 sets 2,500 to 3,500 psi for porch slabs exposed to weather.

Can a deck hold a hot tub?

Only if it was built or reinforced for one. IRC Table R301.5 sets 40 lb per sq ft of live load for decks, and the AWC DCA 6 guide excludes decks supporting hot tubs. Hot Spring allows a deck rated above the tub’s dead weight, 95 to 130 lb per sq ft for its models, after a contractor or structural engineer confirms it.

Sources

  1. Hot Spring Spas (Watkins Wellness). Highlife Collection Pre-Delivery Instructions (spec chart, deck and foundation). Accessed 2026-10-26.
  2. Hot Spring Spas (Watkins Wellness). Limelight Collection Pre-Delivery Instructions. Accessed 2026-10-26.
  3. Hot Spring Spas (Watkins Wellness). Hot Spot Collection Pre-Delivery Instructions. Accessed 2026-10-26.
  4. Hot Spring Spas. Model specification pages for 19 Hot Spring hot tubs (Grandee to TX). Accessed 2026-10-26.
  5. Sundance Spas. Model specification pages for 11 Sundance hot tubs, model year 2026 (Aspen to Capri). Accessed 2026-10-26.
  6. Jacuzzi Hot Tubs. Dimension and Specification Handbook (2017). Accessed 2026-10-26.
  7. Arctic Spas Spokane. Kodiak technical specifications (dealer-hosted). Accessed 2026-10-26.
  8. U.S. Geological Survey. Water Density. Accessed 2026-10-26.
  9. International Code Council via UpCodes. IRC 2021 Chapter 3, Table R301.5 Minimum Uniformly Distributed Live Loads. Accessed 2026-10-26.
  10. International Code Council via UpCodes. IRC 2021 Chapter 4, Table R402.2 Minimum Specified Compressive Strength of Concrete. Accessed 2026-10-26.
  11. American Wood Council. DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015 IRC). Accessed 2026-10-26.
  12. Bullfrog Spas. Picking the Right Hot Tub Foundation. Accessed 2026-10-26.
  13. Bullfrog Spas. Delivery & Installation. Accessed 2026-10-26.
  14. Bullfrog Spas. How Much Does a Hot Tub Weigh and Can You Move it By Yourself?. Accessed 2026-10-26.
  15. Jacuzzi. Hot Tub Pads: Do You Really Need One?. Accessed 2026-10-26.
  16. HomeGuide. How Much Does a Concrete Slab Cost? (February 3, 2026). Accessed 2026-10-26.
  17. Pool Construction & Service research. How Many Homes Have a Hot Tub? (EIA RECS 2024 tabulation). Accessed 2026-10-26.
  18. Pool Construction & Service research. Pool Electrocution Statistics. Accessed 2026-10-26.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.