Skip to content
Inground pool with a plain bag and a plastic scoop resting on the stone coping
Salt chlorinator calculator and formulas

Pool Salt Calculator: Pounds and Bags of Salt by PPM, Plus Dilution Math

This pool salt calculator multiplies the ppm you need by your gallons and 8.34, then divides by 1,000,000: taking 20,000 gallons from 0 to 3,200 ppm takes 534 lb, or 14 bags of 40 lb.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓Checked against 5 makersPentair, AutoPilot, Hayward, Hot Spring and Arctic Spas charts land within 1.1% of the formula.
  • ✓Bags for 10,000 to 40,000 gal40 lb bag counts at each maker's ideal, from 3,000 to 3,600 ppm.
  • ✓Too much salt?Drain share = 1 minus target / current, with fill-water and rain cases worked out.
Quick answer
Pounds of salt = (target ppm minus current ppm) x gallons x 8.34 / 1,000,000. One 40 lb bag raises 10,000 gallons by about 480 ppm. If you overshoot, drain 1 minus target/current of the water: 4,000 to 3,200 ppm means 20%. Use 99% to 99.8% pure sodium chloride, never rock salt.
8.34 lb
Salt per 100 ppm, 10,000 gal
+480 ppm
One 40 lb bag in 10,000 gal
534 lb (14 bags)
20,000 gal, 0 to 3,200 ppm
20%
Drain from 4,000 to 3,200 ppm

Pool salt calculator: enter gallons, current ppm and target ppm

Enter your pool’s gallons, the salt reading from a test strip, meter or chlorinator display, your chlorinator’s target ppm and your bag size. The calculator returns pounds of salt, whole bags rounded up and kilograms, using 8.34 lb per gallon of water. The default shows a 20,000 gallon pool filled fresh to Hayward’s 3,200 ppm.

Pool salt calculator
…lb of salt to add
…bags (rounded up)
…kilograms

Formula source: USGS Water Density table (62.4 lb per cubic foot) and USGS Water Science Glossary (7.48 gallons per cubic foot): 8.34 lb per gallon; formula checked against Pentair, AutoPilot, Hayward, Hot Spring and Arctic Spas salt charts. Estimates only.

Default result: 20,000 gallons from 0 to 3,200 ppm takes 534 lb of salt, which is 14 bags of 40 lb or 242 kg. At Leslie’s list price of $11.99 per 40 lb bag (June 2026 capture), that fill costs $167.86. If you do not know your gallons, run our pool volume calculator first. The full switch, from stabilizer and plaster waits to the chlorinator itself, is laid out in our guide on how to convert a pool to salt water.

The calculator stops at zero: a reading above the target returns 0 lb, and the dilution table in the overshoot section gives the share of water to drain instead. It assumes pure sodium chloride; the Pentair and Jandy manuals ask for at least 99.8% NaCl, so a 99% salt adds about 1% less than the number shown.

Key takeaways

  • Pounds of salt = ppm to add x gallons x 8.34 / 1,000,000, because a gallon of water weighs 8.34 lb (USGS: 62.4 lb per cubic foot divided by 7.48 gallons).
  • The formula lands within 1.1% of 5 maker charts: Pentair IntelliChlor Plus/LT lists 300 lb for 10,000 gallons from 0 to 3,600 ppm (formula 300.2 lb) and AutoPilot 230 lb for 11,000 gallons from 500 to 3,000 ppm (229.3 lb).
  • A new 10,000 to 40,000 gallon fill takes 7 to 27 bags of 40 lb salt at Hayward‘s 3,200 ppm and 8 to 31 bags at Pentair’s 3,600 ppm.
  • Overshoot fix: drain 1 minus target/current of the water; 4,000 to 3,200 ppm is 20%, or 4,000 gallons of a 20,000 gallon pool, before Pentair‘s 4,500 ppm corrosion line for IntelliChlor IC cells.
  • Five chlorinator makers rule out rock salt, and 21 CFR 172.490 allows up to 13 ppm yellow prussiate of soda in food salt, an anti-caking agent AutoPilot says can stain finishes yellow.

How many bags of salt does a pool need?

For a new fill, multiply your chlorinator’s target ppm by gallons and 8.34, divide by 1,000,000, then by your bag weight. At 3,200 ppm (Hayward) a 10,000 gallon pool needs 7 bags of 40 lb and a 40,000 gallon pool 27; at 3,600 ppm (Pentair) the same pools need 8 and 31. Top-ups are smaller: each 40 lb bag adds about 480 ppm to 10,000 gallons.

Pool salt calculator chart: pounds and 40 lb bags for a new fill from 0 ppm, 10,000 to 40,000 gallons, by maker target
Pool gallonslb per 100 ppmIntex or AutoPilot 3,000 ppm: lb (40 lb bags)Hayward 3,200 ppm: lb (bags)CircuPool 3,500 ppm: lb (bags)Pentair 3,600 ppm: lb (bags)
10,0008.3250 (7)267 (7)292 (8)300 (8)
15,00012.5375 (10)400 (11)438 (11)450 (12)
20,00016.7500 (13)534 (14)584 (15)600 (16)
25,00020.9626 (16)667 (17)730 (19)751 (19)
30,00025.0751 (19)801 (21)876 (22)901 (23)
35,00029.2876 (22)934 (24)1,022 (26)1,051 (27)
40,00033.41,001 (26)1,068 (27)1,168 (30)1,201 (31)

PC&S arithmetic: lb = ppm x gallons x 8.34 / 1,000,000; bags rounded up. Targets: Intex and AutoPilot 3,000 ppm; Hayward 3,200; CircuPool 3,500; Pentair 3,600. Download CSV

40 lb bags of salt for a new fill, by pool size and maker target (PC&S arithmetic, 2026)
40 lb bags of salt for a new fill, by pool size and maker target (PC&S arithmetic, 2026)Line chart: a 10,000 gallon pool needs 7 bags for 3,000 or 3,200 ppm and 8 bags for 3,500 or 3,600 ppm; a 40,000 gallon pool needs 26, 27, 30 and 31 bags.01020304010,00015,00020,00025,00030,00035,00040,0003,000 ppm, 10,000: 73,000 ppm, 15,000: 103,000 ppm, 20,000: 133,000 ppm, 25,000: 163,000 ppm, 30,000: 193,000 ppm, 35,000: 223,000 ppm, 40,000: 263,000 ppm3,200 ppm, 10,000: 73,200 ppm, 15,000: 113,200 ppm, 20,000: 143,200 ppm, 25,000: 173,200 ppm, 30,000: 213,200 ppm, 35,000: 243,200 ppm, 40,000: 273,200 ppm3,500 ppm, 10,000: 83,500 ppm, 15,000: 113,500 ppm, 20,000: 153,500 ppm, 25,000: 193,500 ppm, 30,000: 223,500 ppm, 35,000: 263,500 ppm, 40,000: 303,500 ppm3,600 ppm, 10,000: 83,600 ppm, 15,000: 123,600 ppm, 20,000: 163,600 ppm, 25,000: 193,600 ppm, 30,000: 233,600 ppm, 35,000: 273,600 ppm, 40,000: 313,600 ppm

Test first: fill water and past liquid chlorine leave salt behind, so most pools need fewer bags.

Source: lb = ppm x gallons x 8.34 / 1,000,000, rounded up to whole 40 lb bags. Targets from Intex, AutoPilot, Hayward, CircuPool and Pentair manuals.. Download chart data (CSV)

Pick the target from your own manual: ideal salt runs from 3,000 ppm (Intex, AutoPilot) through 3,200 (Hayward) and 3,500 (CircuPool) to 3,600 (Pentair). Low-salt cutoffs, stabilizer targets and cell care for nine models are in our salt water pool maintenance guide. Bags come in several sizes: Hayward lists 40 to 80 lb bags and AutoPilot 25 to 60 lb (11 to 27 kg), which is why the calculator takes any bag weight.

Round up on paper, then add in stages. CircuPool says to add large amounts in portions and retest at each stage, and Hayward, Pentair and Jandy all allow 24 hours of circulation before the reading settles. A 15,000 gallon pool needs 400.3 lb for 3,200 ppm, which the table rounds to 11 bags; 10 bags give 3,197 ppm, close enough to stop and retest.

How is the pool salt formula derived, and does it match maker charts?

One ppm by weight is 1 lb of salt in 1,000,000 lb of water. A gallon of water weighs 8.34 lb (USGS: 62.4 lb per cubic foot divided by 7.48 gallons), so pounds of salt = ppm x gallons x 8.34 / 1,000,000. Charts from Pentair, AutoPilot, Hayward, Hot Spring and Arctic Spas land within 1.1% of it.

Unit check: 1 ppm is 1 lb per 1,000,000 lb of water, a gallon weighs 8.34 lb (USGS), so 20,000 gallons from 0 to 3,200 ppm takes 534 lb; overshoot share to drain = 1 minus target / current.
Unit check: 1 ppm is 1 lb per 1,000,000 lb of water, a gallon weighs 8.34 lb (USGS), so 20,000 gallons from 0 to 3,200 ppm takes 534 lb; overshoot share to drain = 1 minus target / current.
Key numbers behind the pool salt calculator
NumberValueSource
Weight of 1 gallon of water8.34 lb (62.4 lb per cu ft / 7.48 gal per cu ft)USGS Water Density table; USGS glossary
Salt to raise 10,000 gal by 100 ppm8.34 lbPC&S arithmetic
ppm added by 1 lb of salt in 10,000 gal12 ppm (11.99)PC&S arithmetic
ppm added by one 40 lb bag in 10,000 gal480 ppmPC&S arithmetic
Water that weighs 1,000,000 lb119,904 galPC&S arithmetic
Weight of 1 gallon at 80 F8.317 lb (62.217 lb per cu ft)USGS Water Density table
Pounds to kilogramsx 0.4535924 (the widget rounds to 0.4536)NIST SP 811
Salt test interval at public pools with in-line generatorsAt least weekly2024 MAHC 5.7.5.11

Sources: USGS Water Density; USGS Water Science Glossary; NIST SP 811, Appendix B.8; 2024 MAHC. PC&S arithmetic. Download CSV

Worked arithmetic: the formula against 5 maker salt charts
Maker chartChart saysFormula: ppm x gallons x 8.34 / 1,000,000Difference
Pentair IntelliChlor Plus/LT, Table 1: 0 to 3,600 ppm, 10,000 gal300 lb300.2 lb-0.1%
Pentair IntelliChlor Plus/LT, Table 1: 2,000 to 3,600 ppm, 20,000 gal267 lb266.9 lb0.0%
AutoPilot Digital Nano: 500 to 3,000 ppm, 11,000 gal230 lb229.3 lb+0.3%
Hayward Aqua Rite chart: 0 to 3,200 ppm, 10,000 gal267 lb266.9 lb0.0%
Hot Spring FreshWater (spa): 2 1/3 cups (660 g) per 100 gal for 1,750 ppm1.455 lb per 100 gal1,745 ppm-0.3%
Arctic Spas Spa Boy (spa): Cub, 275 gal, to 2,200 ppm5.1 lb5.05 lb+1.1%

Sources: Pentair IntelliChlor Plus/LT guide, Table 1 (2025); AutoPilot Digital Nano manual, Rev 5 (2020); Hayward Aqua Rite manual (2010); Hot Spring FreshWater Salt System manual (2018); Arctic Spas Spa Boy dose table (Wayback, Apr 2026). PC&S arithmetic. Download CSV

Pentair IntelliChlor Plus and LT guide, Table 1: 300 lb takes 10,000 gallons from 0 to 3,600 ppm and 267 lb takes 20,000 gallons from 2,000 to 3,600 ppm, both within 0.1% of the formula. Accessed Nov 1, 2026.
Pentair IntelliChlor Plus and LT guide, Table 1: 300 lb takes 10,000 gallons from 0 to 3,600 ppm and 267 lb takes 20,000 gallons from 2,000 to 3,600 ppm, both within 0.1% of the formula. Accessed Nov 1, 2026.

Water temperature barely moves the answer. The USGS density table lists 62.424 lb per cubic foot at 39.2 F and 62.217 lb at 80 F, which is 8.345 and 8.317 lb per gallon; at 80 F the 20,000 gallon default needs 532.3 lb instead of 533.8 lb, 0.3% less. Swim University‘s calculator uses 8.35, a 0.1% difference. Hot tubs use the same formula at 1,200 to 3,000 ppm, covered in our salt water hot tub guide.

Why does the salt reading drop after rain or a refill?

Salt leaves only with water. Rain that overflows the pool, backwashing, splash-out and partial drains take salt with them, while evaporation leaves it behind, according to the Hayward, AutoPilot and CircuPool manuals. Every 1,000 gallons that leave a pool at 3,200 ppm carry 26.7 lb of salt, so retest after refilling and dose only the difference.

Worked examples: salt reading after rain, evaporation and partial refills, 16 x 32 ft pool
Event, 16 x 32 ft pool holding 18,191 gal at 3,200 ppmArithmeticSalt reading afterSalt to put back
2 inches of rain, overflow carries the same volume out512 sq ft x 2/12 ft x 7.48 = 638 gal = 3.5% of the waterAbout 3,088 ppm17 lb
2 inches of evaporation, before topping offSalt stays; water falls to 17,553 galAbout 3,316 ppmNone: top off, then retest
Drain 25% (4,548 gal) and refill with 0 ppm water3,200 x 0.752,400 ppm121 lb, or 4 bags
Drain 25% and refill with fill water that tests 200 ppm3,200 x 0.75 + 200 x 0.252,450 ppm114 lb, or 3 bags
Any 1,000 gal that leaves at 3,200 ppm1,000 x 3,200 x 8.34 / 1,000,000Depends on pool size26.7 lb

PC&S arithmetic. Pool volume 18,191 gal from our pool volume calculator (USGS 7.48 gal per cu ft); salt loss rules from Hayward AquaRite S3, AutoPilot and CircuPool manuals. Download CSV

Test after topping off, not before. Two inches of evaporation from a 16 x 32 ft pool concentrates 3,200 ppm to about 3,316 ppm until the hose runs, and the reading returns to 3,200 once the water is back. Two inches of rain that overflows does the opposite: about 3,088 ppm, a 17 lb top-up. Evaporation rates by city are in our pool evaporation research.

Fill water is not always zero, and meters are not exact. The EPA secondary standard for chloride in drinking water is 250 mg/L, which equals 412 mg/L as sodium chloride, so test the hose water before a big refill. Pentair says its IntelliChlor salt sensor reads within plus or minus 500 ppm, and the Plus/LT guide asks owners to confirm with a separate reliable test before dosing. Test methods compared side by side are in our guide on how to test pool water.

What happens if you add too much salt, and how much water do you drain?

Salt does not evaporate or burn off, so the only fix is dilution: drain a share of the water equal to 1 minus target divided by current, then refill. From 4,000 ppm to 3,200 ppm that is 20%, or 4,000 gallons of a 20,000 gallon pool. Pentair warns IntelliChlor salt above 4,500 ppm may corrode equipment, and Hayward says most people taste salt at 3,500 to 4,000 ppm.

Overshoot dilution table: share and gallons to drain to reach 3,200 ppm
Current reading, ppmShare to drain (1 - 3,200 / current)Gallons to drain, 20,000 gal poolIf fill water tests 200 ppmIf you drain and refill at the same time
3,60011.1%2,22211.8%11.8% (2,356 gal)
4,00020.0%4,00021.1%22.3% (4,463 gal)
4,50028.9%5,77830.2%34.1% (6,819 gal)
5,00036.0%7,20037.5%44.6% (8,926 gal)
6,00046.7%9,33348.3%62.9% (12,572 gal)

PC&S arithmetic. Corrosion and taste thresholds: Pentair IntelliChlor IC guide; Pentair Plus/LT guide; Jandy AquaPure; Hayward (2023). Download CSV

Share of pool water to drain and refill to bring salt back to 3,200 ppm (PC&S arithmetic)
Share of pool water to drain and refill to bring salt back to 3,200 ppm (PC&S arithmetic)Bar chart: from 3,600 ppm drain 11.1% of the water, from 4,000 ppm 20%, from 4,500 ppm 28.9%, from 5,000 ppm 36% and from 6,000 ppm 46.7% to reach 3,200 ppm.0%12.5%25%37.5%50%3,600 ppm: 11.1%3,600 ppm4,000 ppm: 20%4,000 ppm4,500 ppm: 28.9%4,500 ppm5,000 ppm: 36%5,000 ppm6,000 ppm: 46.7%6,000 ppm

Fill water that already carries salt, or draining while the hose runs, both raise the share.

Source: Share = 1 - target / current, for one drain and refill with 0 ppm water.. Download chart data (CSV)

The rule is a mass balance. After draining a share d, the salt left is current x (1 minus d); setting that equal to the target gives d = 1 minus target / current, the same result PoolDial prints for 4,000 to 3,200 ppm. If the fill water carries F ppm, d = (current minus target) / (current minus F). Draining while the hose refills at the same time throws away some new water, so the share rises to the natural log of current / target: 22.3% instead of 20% from 4,000 ppm.

Corrosion limits set how urgent the drain is. Jandy says salt above 4,000 ppm may damage its AquaPure power center and above 6,000 ppm may corrode pool fixtures, and Pentair’s Plus/LT guide puts accelerated corrosion above 6,000 ppm. Before the pump goes on, check where the water may go; pump sizing and hose routes are in our guide on how to drain a pool.

What kind of salt should you use in a pool: evaporated, solar or mined?

Use sodium chloride that is at least 99% pure, and at least 99.8% if your chlorinator is a Pentair IntelliChlor Plus/LT or Jandy AquaPure. Evaporated and solar salt both qualify; mined rock salt does not, because five makers say its impurities shorten cell life or stain. Avoid salt with yellow prussiate of soda, iodine or calcium chloride.

Pool salt types compared: what each is, US market share and what chlorinator makers allow
Salt typeWhat it isUS share of salt sold, 2025 (USGS)Maker rulesSource
Evaporated (vacuum pan) saltBrine boiled down in vacuum pans; granular, food grade9%Jandy and Pentair ask for at least 99.8% NaCl, evaporated, granulated, non-iodized; CircuPool says evaporated, at least 99%USGS MCS 2026; Jandy H0325600; Pentair 523854; CircuPool CORE
Solar saltSeawater or brine dried by sun and wind9%Hayward (2010) names Coarse Solar Salt; AutoPilot accepts solar salt flakes over 99% pureUSGS MCS 2026; Hayward Aqua Rite; AutoPilot Rev 5
Rock salt (mined)Mined underground; road-salt grade38%Hayward, Jandy, Pentair, CircuPool and AutoPilot all say do not use it: insoluble impurities shorten cell life or stainUSGS MCS 2026; maker manuals
Water softener pelletsCompressed evaporated saltCounted as evaporatedAllowed by Hayward, Jandy and CircuPool if at least 99% pure; slower to dissolveMaker manuals
Salt with anti-caking agent (YPS)Yellow prussiate of soda (sodium ferrocyanide), up to 13 ppm in food salt (21 CFR 172.490)n/aAutoPilot, CircuPool and Jandy warn of yellow staining or discoloration; Hayward S3 bars salt with more than 1% YPSeCFR; AutoPilot; CircuPool; Jandy; Hayward S3
Iodized table saltFood salt with iodine addedn/aHayward and AutoPilot say do not useHayward manuals; AutoPilot
Calcium chloride, potassium chloride, sodium bromideNot sodium chloriden/aPentair, Jandy and CircuPool say do not use them as saltPentair 523854; Jandy; CircuPool
Pool grade salt for public poolsCertified to NSF/ANSI 50 or 60, or EPA FIFRA registeredn/aRequired at public venues under MAHC 5.7.3.1.5.1CDC, 2024 MAHC

Sources: USGS Mineral Commodity Summaries 2026, Salt; 21 CFR 172.490; Jandy H0325600; Pentair 523854; CircuPool CORE; Hayward Aqua Rite; Hayward AquaRite S3; AutoPilot Rev 5; 2024 MAHC. Accessed Nov 1, 2026. Download CSV

Rock salt is tempting because it is cheap. The USGS put 2025 US salt sales at 44% salt in brine, 38% rock salt, 9% solar salt and 9% vacuum pan salt, with vacuum and open pan salt averaging $260 a metric ton at the plant against $54 for rock salt. Pool makers accept the higher-priced evaporated and solar grades and reject rock salt by name.

Yellow prussiate of soda is legal in food salt and still unwelcome in pools. 21 CFR 172.490 allows the anti-caking agent, sodium ferrocyanide, at up to 13 ppm; AutoPilot says it can tint water or stain finishes yellow, CircuPool and Jandy warn of discolored fittings, and Hayward’s AquaRite S3 manual bars salt with more than 1% of it. Public pools under the 2024 MAHC must use salt certified to NSF/ANSI 50 or 60 or registered under FIFRA (5.7.3.1.5.1).

What should you do at each salt reading?

Match the reading to the row: dose with the calculator when salt is low, top off and retest when water is missing, and drain a share when salt is above your maker’s limit. Each rule below cites the manual it comes from, so the table works for Hayward, Pentair, Jandy, CircuPool, AutoPilot and Intex owners, and for public pools under the 2024 MAHC.

Pool salt decision table: if your situation is X, do Y
If your situation isDo thisWhy (source)
New fill or the reading is 0Enter 0 as current salt and your maker's ideal as targetFill water starts near zero; AutoPilot and Hayward say test first anyway
Reading is below your maker's low cutoffAdd the calculated pounds, brush, run the pump 24 hours, retestHayward, Pentair and Jandy allow 24 hours to dissolve
The calculator says more than 4 bagsAdd about two thirds, wait 24 hours, retest, then add the restCircuPool: add large amounts in portions and retest
Pool just lost water to rain overflow, backwash or a partial drainRetest after refilling, then dose only the differenceSalt leaves only with water (AutoPilot, CircuPool)
Pool is low from evaporationTop off first, then testEvaporation leaves salt behind (Hayward S3), so a low pool reads high
Reading is above your maker's limitDrain 1 - target / current of the water and refillPentair: above 4,500 ppm (IntelliChlor IC) may corrode equipment
You have only rock salt or iodized saltDo not use it; buy 99% to 99.8% pure NaClHayward, Pentair, Jandy, CircuPool, AutoPilot
Your pool is a public venueUse NSF/ANSI 50 or 60 certified salt and test salt weekly2024 MAHC 5.7.3.1.5.1 and 5.7.5.11

Sources: AutoPilot; Hayward AquaRite S3; Pentair IntelliChlor IC; Pentair Plus/LT; Jandy; CircuPool; 2024 MAHC. Download CSV

How we compiled this

We checked the formula against salt charts in 5 maker documents (Pentair IntelliChlor Plus/LT, AutoPilot Digital Nano, Hayward Aqua Rite, Hot Spring FreshWater and Arctic Spas Spa Boy), read salt-type rules in 7 chlorinator manuals, and used USGS density, glossary and 2026 salt commodity data, 21 CFR 172.490, EPA’s secondary standards, the 2024 MAHC and a dated Leslie’s listing, in October and November 2026. All bag, rain and dilution figures are PC&S arithmetic shown in the tables. We did not test salt products.

Frequently Asked Questions

How many bags of salt for a 15,000 gallon pool?

About 10 bags of 40 lb for a new fill to 3,200 ppm: the formula gives 400.3 lb, and 10 bags reach 3,197 ppm. Pentair’s 3,600 ppm target takes 450 lb, so 12 bags rounded up. If the pool already reads 1,500 ppm, a 3,200 ppm target needs 213 lb, or 6 bags.

How much does 1 bag of salt raise ppm?

A 40 lb bag raises 10,000 gallons by about 480 ppm, 15,000 gallons by 320 ppm and 20,000 gallons by 240 ppm, because each pound adds 12 ppm per 10,000 gallons. Divide 4,796 by your gallons in thousands to get the rise for any pool, then confirm with a test after 24 hours of circulation.

Does rain lower my pool's salt level?

Only when water leaves. Rain that overflows the pool or that you pump back down carries salt out: 2 inches of overflow on a 16 x 32 ft pool drops 3,200 ppm to about 3,088 ppm. Evaporation does not remove salt, according to the Hayward, AutoPilot and CircuPool manuals, so top off before you test.

How do I lower the salt level in my pool?

Drain and refill. The share to drain is 1 minus target divided by current: from 4,000 to 3,200 ppm that is 20%, from 5,000 ppm 36%. If your fill water tests 200 ppm, use (current minus target) divided by (current minus 200), which raises 20% to 21.1%. Retest after 24 hours.

Can I use water softener salt in my pool?

Yes, if it is at least 99% pure sodium chloride. Hayward, Jandy and CircuPool accept water conditioning pellets, which are compressed evaporated salt, but say they dissolve more slowly than granular pool salt. AutoPilot rules out salt with rust preventatives; five makers rule out rock salt, and Pentair, Jandy and CircuPool rule out calcium chloride.

How much salt is 100 ppm?

8.34 lb per 10,000 gallons, because 100 ppm is 100 lb per 1,000,000 lb of water and 10,000 gallons weighs 83,400 lb. That is 16.7 lb for 20,000 gallons and 33.4 lb for 40,000 gallons, or just under one 40 lb bag per 100 ppm in a 40,000 gallon pool.

How long does pool salt take to dissolve?

About a day with the pump running. CircuPool says 24 to 48 hours in summer and longer in winter, and Hayward, Pentair and Jandy all allow 24 hours of circulation before the salt reading settles. Brush the floor so salt does not pile up, and leave the chlorinator output low until it dissolves.

Is 3,000 ppm salt enough?

For some models. 3,000 ppm is the ideal for Intex and AutoPilot and sits inside Hayward’s 2,700 to 3,400 ppm band, but Pentair’s IntelliChlor Plus and LT warn below 3,000 ppm and aim for 3,600. Check your manual’s ideal, then enter it as the target above.

Sources

  1. U.S. Geological Survey. Water Density. Accessed 2026-11-01.
  2. U.S. Geological Survey. Water Science Glossary. Accessed 2026-11-01.
  3. Pentair. IntelliChlor Plus and LT Installation and User's Guide (P/N 523854 Rev B, 2025). Accessed 2026-10-27.
  4. Pentair. IntelliChlor Installation and User's Guide, IC15 to IC60 (P/N 520589 Rev R, 2023). Accessed 2026-10-27.
  5. AutoPilot. Pool Pilot Digital Nano and Nano+ manual (LTP0086 Rev 5, 2020). Accessed 2026-10-27.
  6. Hayward. Aqua Rite Electronic Chlorine Generator manual (092009N Rev P, 2010). Accessed 2026-10-27.
  7. Hayward. AquaRite S3 Owner's Manual (092769 Rev D). Accessed 2026-10-27.
  8. Hayward. AquaRite 900 Series Owner's Manual (092623 Rev D). Accessed 2026-10-27.
  9. Hayward. How To Take Care of a Saltwater Pool (2023). Accessed 2026-10-27.
  10. Jandy (Zodiac Pool Systems). AquaPure and PureLink Installation and Operation Manual (H0325600 Rev F, 2021). Accessed 2026-10-27.
  11. CircuPool. CORE Series Salt Systems manual (R202411). Accessed 2026-10-27.
  12. Intex. Krystal Clear Saltwater System ECO5110/6110 manual (329PO R2, 2021). Accessed 2026-10-27.
  13. Watkins Wellness (Hot Spring). FreshWater Salt System Owner's Manual (2018). Accessed 2026-11-01.
  14. Arctic Spas. Spa Boy Salt Dose Guidance Table, Wayback capture Apr 11, 2026. Accessed 2026-11-01.
  15. U.S. Geological Survey. Mineral Commodity Summaries 2026: Salt. Accessed 2026-11-01.
  16. eCFR, U.S. Food and Drug Administration. 21 CFR 172.490, Yellow prussiate of soda. Accessed 2026-11-01.
  17. U.S. EPA. Secondary Drinking Water Standards: Guidance for Nuisance Chemicals. Accessed 2026-11-01.
  18. CDC. 2024 Model Aquatic Health Code, 5th Edition, Code Language. Accessed 2026-10-26.
  19. NIST. NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically. Accessed 2026-11-01.
  20. Leslie's. Leslie's Pool Salt 40 lb listing, Wayback capture Jun 30, 2026. Accessed 2026-10-27.
  21. Swim University. Pool Salt Calculator. Accessed 2026-11-01.
  22. PoolDial. Free Salt Pool Calculator. Accessed 2026-11-01.
  23. PubChem, NIH. Sodium Chloride (CID 5234) and Chloride (CID 312) molecular weights. Accessed 2026-11-01.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.