Skip to content
In-ground backyard pool with the water line several inches below the tile band
Pool repair: leaks and water loss

Pool Leak Detection: Find the Leak, Then Price the Repair

Pool leak detection starts with a 24-hour bucket test: if the pool drops more than a bucket of pool water beside it, it may be leaking, and the EPA calls over 2 inches a week a likely leak.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓Know your normalPeak-month evaporation runs 1.08 inches a week in San Diego to 2.74 in Las Vegas (NOAA pan data, PC&S model).
  • ✓Test before you payThe EPA bucket test takes 24 hours and a 2.5 to 5 gallon bucket.
  • ✓Dated pricesHomeGuide lists inground leak detection at $400 to $1,000 (July 2025).
Quick answer
Run a 24-hour bucket test with the pump and autofill off (EPA, 2022). If the pool loses more than the bucket, repeat it with the pump on and then off to split plumbing from the shell. Professional detection costs $400 to $1,000 for an inground pool, and repair usually $500 to $1,500 (HomeGuide, July 2025).
Over 2 in/week (3 in hot, dry areas)
Likely leak
$400 to $1,000
Detection, inground
$500 to $1,500
Leak repair
280.5 gallons
1 inch, 15 x 30 ft pool

Key takeaways

  • The EPA calls a loss of more than 2 inches a week, or 3 inches in hot, dry areas, a likely leak (EPA WaterSense pool guide, 2022).
  • Normal peak-month evaporation runs from 1.08 inches a week in San Diego to 2.74 in Las Vegas, based on NOAA TR NWS 34 pan data in our pool evaporation research.
  • The quarter-inch-a-day rule fails in 9 of 25 cities: their healthy pools top 0.25 inch a day in the peak month (NOAA-based model, PC&S).
  • Inground pool leak detection costs $400 to $1,000 and a pressure test $150 to $500, per HomeGuide (July 22, 2025).
  • A 0.5 inch a day leak in a 15 x 30 ft pool wastes 4,208 gallons in 30 days, about $123 of water and sewer in Atlanta at October 2026 rates (PC&S rate ledger).
  • Some utilities credit repaired pool leaks, such as Cobb County Water System, while Hillsborough County, FL excludes any repair associated with a swimming pool.

Is my pool leaking or just evaporating?

Compare your loss with what weather alone removes where you live. An uncovered pool loses 1.08 to 2.74 inches a week in its peak month across 25 US cities (NOAA pan data, PC&S model), and the EPA treats more than 2 inches a week, or 3 inches in hot, dry areas, as a likely leak. A bucket test settles the question in 24 hours.

Key numbers for pool leak detection, with their sources
NumberWhat it meansSource
2 in/week (3 in hot, dry areas)Weekly loss EPA treats as a likely leakU.S. EPA WaterSense, 2022
24 hoursLength of the EPA bucket test; Mesa runs 2 to 3 daysU.S. EPA WaterSense; City of Mesa
1.08 to 2.74 in/weekNormal peak-month evaporation, San Diego to Las VegasNOAA TR NWS 34 via PC&S model
280.5 gallonsWater in 1 inch off a 15 x 30 ft pool (450 sq ft x 1/12 x 7.48)PC&S arithmetic; 7.48 gal per cu ft from Town of Flower Mound
$400 to $1,000Leak detection, inground poolHomeGuide, July 22, 2025
$500 to $1,500Typical leak repair after detectionHomeGuide, July 23, 2025; Fixr, January 31, 2025
15 psi (20 psi max)Pressure-test target for pool linesLeakTronics, September 18, 2024

Sources: U.S. EPA WaterSense; City of Mesa; PC&S evaporation research; HomeGuide; Fixr; LeakTronics. Download CSV

The baseline below converts NOAA Technical Report NWS 34 Class A pan readings from 1956 to 1970 into pool evaporation with the 0.70 pan coefficient in NOAA TR NWS 33. Five cities top 2 inches a week in their peak month with no leak at all: Las Vegas, Tucson, Phoenix, Albuquerque and Salt Lake City. That fits the higher line of 3 inches a week the EPA WaterSense pool guide allows in hot, dry areas. The full city model, including rainfall offsets, sits in our pool evaporation rate report.

Normal evaporation from an uncovered pool, 25 US cities: peak month and year-round average (modelled)
CityPeak monthPeak-month evaporation (in/week)Peak-month evaporation (in/day)Year-round average (in/week)Peak month above EPA's 2 in/week leak line?
Las Vegas, NVJul2.740.391.60Yes
Tucson, AZJun2.480.351.50Yes
Phoenix, AZJun2.420.351.43Yes
Albuquerque, NMJun2.200.311.20Yes
Dallas, TXJul1.790.261.03No
San Antonio, TXJul1.730.251.03No
Fort Worth, TXJul1.790.261.02No
Miami-Dade County (Miami), FLJul1.270.181.01No
Fresno, CAJul1.960.281.00No
Orlando, FLMay1.350.190.98No
Austin, TXJul1.680.240.98No
Tampa, FLMay1.400.200.97No
Salt Lake City, UTJul2.110.300.95Yes
Sacramento, CAJul1.790.260.94No
Riverside, CAJul1.560.220.93No
Oklahoma City, OKJul1.590.230.91No
Houston, TXJul1.370.200.91No
Denver, COJul1.550.220.88No
Los Angeles, CAJul1.240.180.87No
San Diego, CAJul1.080.150.81No
Charlotte, NCJul1.210.170.78No
New Orleans, LAJun1.130.160.78No
Atlanta, GAJun1.160.170.77No
Raleigh, NCJul1.090.160.73No
Nashville, TNJul1.190.170.72No

Source: NOAA TR NWS 34 pan data x 0.70 (NOAA TR NWS 33), via PC&S pool evaporation research; threshold from U.S. EPA WaterSense (2022). Download CSV

Peak-month pool evaporation in 25 US cities, inches per week (NOAA-based model)Uncovered pool, pan evaporation x 0.70; EPA calls more than 2 in/week (3 in hot, dry areas) a likely leak
Peak-month pool evaporation in 25 US cities, inches per week (NOAA-based model)Bar chart of peak-month pool evaporation: Las Vegas 2.74, Tucson 2.48, Phoenix 2.42, Albuquerque 2.20 and Salt Lake City 2.11 inches a week are above 2; San Diego is lowest at 1.08 inches a week.Las Vegas, NV: 2.7Las Vegas, NV2.7Tucson, AZ: 2.5Tucson, AZ2.5Phoenix, AZ: 2.4Phoenix, AZ2.4Albuquerque, NM: 2.2Albuquerque, NM2.2Salt Lake City, UT: 2.1Salt Lake City, UT2.1Fresno, CA: 2.0Fresno, CA2.0Dallas, TX: 1.8Dallas, TX1.8Fort Worth, TX: 1.8Fort Worth, TX1.8Sacramento, CA: 1.8Sacramento, CA1.8San Antonio, TX: 1.7San Antonio, TX1.7Austin, TX: 1.7Austin, TX1.7Oklahoma City, OK: 1.6Oklahoma City, OK1.6Riverside, CA: 1.6Riverside, CA1.6Denver, CO: 1.6Denver, CO1.6Tampa, FL: 1.4Tampa, FL1.4Houston, TX: 1.4Houston, TX1.4Orlando, FL: 1.4Orlando, FL1.4Miami-Dade County (Miami), FL: 1.3Miami-Dade County (Miami), FL1.3Los Angeles, CA: 1.2Los Angeles, CA1.2Charlotte, NC: 1.2Charlotte, NC1.2Nashville, TN: 1.2Nashville, TN1.2Atlanta, GA: 1.2Atlanta, GA1.2New Orleans, LA: 1.1New Orleans, LA1.1Raleigh, NC: 1.1Raleigh, NC1.1San Diego, CA: 1.1San Diego, CA1.1

Five of 25 cities top 2 inches a week in their peak month without any leak, so EPA allows 3 inches a week in hot, dry areas.

Source: Source: NOAA Technical Report NWS 34 pan data (1956 to 1970) x 0.70 (NOAA TR NWS 33), via PC&S research /research/pool-evaporation-rate/. Threshold: U.S. EPA WaterSense (2022).. Download chart data (CSV)

Is it normal to lose 1/4 inch of water a day? In summer, often yes in the desert, rarely in humid cities. Year-round averages in our 25-city model run 0.10 to 0.23 inch a day, while peak months run 0.15 inch a day in San Diego to 0.39 inch a day in Las Vegas. A flat quarter-inch rule therefore flags healthy desert pools in July and misses slow leaks in Nashville, Atlanta or Raleigh.

Several popular guides state a single national figure. The table sets six published claims, dated 2024 to 2026 where a date is shown, beside the NOAA-based rate for the same climate, so you can see where a rule of thumb breaks.

What pool guides say about evaporation vs what NOAA pan data shows
What the guide saysWho says it (date)What NOAA pan data showsPC&S read
Pools lose approximately 1/4 inch of water per day on averageLatham Pool Products blog (June 16, 2024)Year-round averages run 0.10 to 0.23 in/day across 25 cities; no city averages 0.25 over a yearToo high as an average; a humid-city pool losing 0.25 in/day all year may be leaking
On average, a pool loses about a quarter inch of water per day to evaporationAmerican Leak Detection pool page (undated, read October 2026)Peak-month rates run 0.15 (San Diego) to 0.39 (Las Vegas) in/dayA national average hides a 2.5x spread between cities
A pool losing more than about a quarter inch a day is probably leakingAlan Smith Pools (2026)9 of 25 cities top 0.25 in/day in their peak month with no leak, led by Las Vegas at 0.39Would flag healthy desert pools in summer; use the bucket test instead
Pool evaporation can reach as much as 1 inch per day in Tucson, credited to University of Arizona ExtensionAmerican Leak Detection Tucson blog (September 8, 2026)Tucson's peak month (June) averages 2.48 in/week, or 0.35 in/daySingle extreme days can beat a monthly mean, but the extension figure was not linked and we could not verify it
Summer evaporation averages about 0.5 inch per day, 3.5 inches per weekTown of Flower Mound, TX utility page (current)Dallas and Fort Worth peak at 1.79 in/week in July (0.26 in/day)About double the NOAA-based July rate and above EPA's 2 in/week leak line
A half-inch to two inches of evaporation per weekCalifornia Spa and Pool Industry Education Council, quoted by Olivenhain MWD (current)Year-round averages of 0.72 to 1.60 in/week; peaks of 1.08 to 2.74 in/weekMatches the NOAA range outside desert summers

Sources: Latham Pool Products; American Leak Detection; Alan Smith Pools; American Leak Detection Tucson blog; Town of Flower Mound; Olivenhain MWD; NOAA rates via PC&S research. Download CSV

How do you do a bucket test for a pool leak?

Set a 2.5 to 5 gallon bucket of pool water on a step so at least two-thirds of it sits under water, shut off the pump, cleaners and autofill, and mark both water levels. After 24 hours, if the pool lost more water than the bucket, the pool may have a leak, per the EPA WaterSense pool guide (2022).

  1. Pick a calm, dry dayNo rain or heavy wind. Shut down the filter pump, any cleaner and the automatic fill, and keep swimmers out for 24 hours (EPA).
  2. Set the bucketFill a 2.5 to 5 gallon bucket to about 1 inch from the top and stand it on a step or bench so at least two-thirds is submerged. A brick or rock inside keeps it still (City of Mesa).
  3. Mark both levelsMark the water line inside the bucket and the pool line on the outside, with a marker, tape or a ruler reading from the rim (EPA).
  4. Read after 24 hoursIf the pool dropped more than the bucket, the pool may have a leak. Mesa and Olivenhain MWD suggest 2 to 3 days for a clearer gap.
  5. Repeat with the pump on, then offRun 24 hours with the pump on, then 24 hours with it off. More loss with the pump running points to plumbing (City of Mesa).
The EPA's Do-It-Yourself Leak Test box: 24 hours, a 2.5 to 5 gallon bucket two-thirds submerged, and a likely leak above 2 inches a week (U.S. EPA WaterSense, Jump Into Pool Water Efficiency, September 2022, page 8; annotated by PC&S, accessed 2026-10-19).
The EPA’s Do-It-Yourself Leak Test box: 24 hours, a 2.5 to 5 gallon bucket two-thirds submerged, and a likely leak above 2 inches a week (U.S. EPA WaterSense, Jump Into Pool Water Efficiency, September 2022, page 8; annotated by PC&S, accessed 2026-10-19).

Can a pool service run the test for you? Yes, and a weekly visit makes it easy: a technician who marks the water line on the same day each week gives you a 7-day reading to set against the EPA line of 2 inches a week. Weekly plans already include an equipment check at the pad, as our pool cleaning service guide explains.

How much water is a pool leak losing?

Multiply the unexplained drop in inches per day, divided by 12, by the surface area in square feet and by 7.48 gallons per cubic foot. One inch off a 15 x 30 ft pool is 280.5 gallons. A 0.40 inch a day leak in that pool wastes 112.2 gallons a day, or 3,366 gallons in 30 days.

Worked example: turning a bucket-test reading into gallons and dollars (example readings for a 15 x 30 ft pool in Phoenix in June)
StepInput or formulaResult
1. Surface area15 ft x 30 ft (example pool)450 sq ft
2. Bucket test readings (example, Phoenix in June)Pool dropped 0.75 in; bucket dropped 0.35 in in 24 hours0.40 in/day not explained by evaporation
3. Check against NOAA baselinePhoenix June peak 2.42 in/week = 0.35 in/day (NOAA-based model)Bucket reading matches local evaporation
4. Convert inches to feet0.40 / 120.0333 ft
5. Volume lost per day450 sq ft x 0.0333 ft15.0 cu ft
6. Gallons lost per day15.0 cu ft x 7.48 gal per cu ft112.2 gallons
7. Gallons lost in 30 days112.2 x 303,366 gallons
8. Water cost in 30 days3,366 gal x $8.54 per 1,000 gal (Phoenix effective top-up rate)$28.75
9. EPA weekly check0.75 in/day x 7 = 5.25 in/weekAbove EPA's 3 in/week line for hot, dry areas: leak likely

Sources: 7.48 gallons per cubic foot from Town of Flower Mound; Phoenix baseline from PC&S evaporation research; Phoenix rate from the PC&S fill-cost ledger; threshold from EPA. Download CSV

The same arithmetic prices a leak anywhere. The table applies the effective top-up rate each utility charges in our cost to fill a pool ledger, which includes sewer where a city bills it on every metered gallon. Atlanta, Houston and Miami-Dade bill sewer that way, so a leak there costs three to five times what it costs in Dallas. If your pool sits under drought rules, check the pool filling restrictions by city before you top up daily.

Water cost of a pool leak for 30 days, 15 x 30 ft pool, 10 US cities and the 25-city median, rates in effect October 2026
CityUtilityEffective $ per 1,000 gal (top-ups)0.25 in/day leak: 2,104 gal ($ per 30 days)0.5 in/day leak: 4,208 gal ($ per 30 days)1 in/day leak: 8,415 gal ($ per 30 days)
Atlanta, GACity of Atlanta Department of Watershed Management (DWM)29.2161.46122.92245.80
Houston, TXCity of Houston, Houston Public Works (Houston Water)27.7458.36116.73233.43
Los Angeles, CALos Angeles Department of Water and Power (LADWP)19.6841.4182.81165.61
Miami-Dade, FLMiami-Dade Water and Sewer Department (WASD), retail17.3836.5773.14146.25
Orlando, FLOrlando Utilities Commission (OUC)9.2719.5039.0178.01
San Antonio, TXSan Antonio Water System (SAWS)8.9718.8737.7575.48
Phoenix, AZCity of Phoenix Water Services Department8.5417.9735.9471.86
Tampa, FLCity of Tampa Water Department (City of Tampa Utilities billing)7.1014.9429.8859.75
Dallas, TXDallas Water Utilities (City of Dallas)5.7712.1424.2848.55
Las Vegas, NVLas Vegas Valley Water District (LVVWD), with Southern Nevada Water Authority (SNWA) charges4.278.9817.9735.93
Median of 25 PC&S ledger citiesVarious8.5417.9735.9471.86

Source: PC&S calculation from utility rate schedules in the PC&S evaporation report and fill-cost ledger. Larger leaks can reach higher rate tiers; treat these as a floor. Download CSV

Water cost of a 0.5 inch per day pool leak for 30 days, 10 US cities, rates in effect October 202615 x 30 ft pool, 4,208 gallons; effective top-up rate including sewer where billed monthly
Water cost of a 0.5 inch per day pool leak for 30 days, 10 US cities, rates in effect October 2026Bar chart: a 0.5 inch per day leak for 30 days costs $122.92 in Atlanta, $116.73 in Houston, $35.94 in Phoenix and $17.97 in Las Vegas.Atlanta, GA: $123Atlanta, GA$123Houston, TX: $117Houston, TX$117Los Angeles, CA: $82.8Los Angeles, CA$82.8Miami-Dade, FL: $73.1Miami-Dade, FL$73.1Orlando, FL: $39.0Orlando, FL$39.0San Antonio, TX: $37.8San Antonio, TX$37.8Phoenix, AZ: $35.9Phoenix, AZ$35.9Tampa, FL: $29.9Tampa, FL$29.9Dallas, TX: $24.3Dallas, TX$24.3Las Vegas, NV: $18.0Las Vegas, NV$18.0

Cities that bill sewer on every metered gallon (Atlanta, Houston, Miami-Dade) pay most for lost water. Larger leaks can reach higher rate tiers, so read these as a floor.

Source: Source: PC&S calculation from utility rate schedules in the PC&S evaporation and fill-cost research (/research/pool-evaporation-rate/, /research/cost-to-fill-a-pool/).. Download chart data (CSV)

How can I tell where my pool is leaking?

Watch when and where the water goes. More loss with the pump running points to pressure-side plumbing such as returns or the backwash line; more loss with the pump off, often with air in the pump basket, points to suction lines; the same loss either way points to the shell, a light niche or a fitting, which a dye test confirms (City of Mesa; Leslie’s).

Decision table: what your water-loss pattern means and what to do next
If your situation isDo thisWhy (source)
Pool and bucket dropped the same amount in 24 hoursTreat it as evaporation; compare your weekly loss with your city in the baseline tableEqual drops mean no leak (Olivenhain MWD; EPA)
Pool dropped more than the bucketRepeat the test for 24 hours pump on and 24 hours pump offSplits plumbing from the shell (City of Mesa)
Loss over 2 in/week (3 in/week in hot, dry areas) with the autofill offBook leak detection even if you skip the bucket testEPA treats that loss as a likely leak
More loss with the pump runningCheck for wet ground at the pad; ask for a pressure test of the return and backwash linesPressure-side leak (Leslie's; LeakTronics)
More loss with the pump off, or air in the pump basketAsk for a pressure test of the skimmer and main drain linesSuction-side leak (Leslie's; EPA)
Same loss pump on or offLet the level fall up to 12 to 18 inches, then dye test where it stopsShell, light or fitting (Leslie's; LeakTronics)
Level stops at the skimmer mouth, light or a returnDye test that fitting within 1/4 inchLeak at that opening (Leslie's)
Pool rises when you plug the overflow drainRepair or replace the autofill valveValve stuck open (EPA)
Pressure test points to a line under the deckAsk for acoustic or tracer gas location before any diggingExcavation runs $100 to $300 an hour (HomeGuide, 2025)

Sources: U.S. EPA WaterSense; City of Mesa; Olivenhain MWD; Leslie’s; LeakTronics; HomeGuide. Download CSV

Pool leak or evaporation: the bucket test first, then the pump-on, pump-off split, then the fitting or line to test (EPA WaterSense 2022; City of Mesa; LeakTronics 2024; Leslie's 2022, updated 2025; HomeGuide 2025).
Pool leak or evaporation: the bucket test first, then the pump-on, pump-off split, then the fitting or line to test (EPA WaterSense 2022; City of Mesa; LeakTronics 2024; Leslie’s 2022, updated 2025; HomeGuide 2025).

What is the most common cause of pool leaks? Plumbing and fittings, more often than the shell. The City of Mesa says leaks are more often caused by plumbing issues or bad seals around fittings, and the EPA lists the liner, pump seal, piping, the pool-to-pipe connection, pool edges and pipe joints. Leslie’s adds that the most common pipe leaks sit just beneath the equipment pad, where pipes turn vertical.

A main drain leak has its own sign: LeakTronics notes the level can fall to about a foot above the drain and stop, with the shallow end holding while the deep end keeps losing (LeakTronics, June 2026). Leslie’s says vinyl pools leak most at stretched spots such as corners and steps, and at gasketed openings for skimmers, returns and lights; if that leak turns into a full liner job, our pool liner replacement cost guide prices it. Repair prices, cover ratings and the rules for plugging an old drain are set out in our pool main drain guide. A cracked or separated skimmer has its own repair-or-replace prices, from $100 to $150 for a seal to $1,200 to $3,000 for a new body, in our pool skimmer guide.

How do professionals find a pool leak?

They narrow the leak in stages: a bucket or static test to confirm it, dye at suspect fittings, a pressure test to find which buried line holds no pressure, then acoustic listening or tracer gas to mark the spot to dig. LeakTronics, which sells the gear, tells technicians to pressurize lines to about 15 psi and never above 20 psi.

Pool leak detection methods compared: what each finds and the rule that governs it
MethodWhat it tells youHow it worksKey number or ruleWho does itSource
Bucket testLeak or evaporationBucket of pool water on a step, pump and autofill off, compare drops24 hours; 2.5 to 5 gal bucket; two-thirds submergedOwnerU.S. EPA WaterSense (2022)
Pump on / pump off bucket testPlumbing or shellRepeat the bucket test with the pump running, then with it off24 hours each; more loss with pump on points to plumbingOwnerCity of Mesa, AZ
Let the level fallHeight of a leaking fittingStop topping up and note where the level stops (skimmer mouth, light, return)Stop if the drop passes 12 to 18 inchesOwnerLeslie's (2022, updated 2025)
Dye testExact spot on the shell or a fittingPump off, release dye beside a suspected crack and watch whether it is pulled inDye within 1/4 inch of the suspected leakOwner or proLeslie's, citing Anderson Manufacturing
Static line test with conesWhether the main drain line leaksCone in the drain port, dye injected near it, watch for pullTakes minutes, per the makerProLeakTronics (2026)
Pressure testWhich buried line leaksPlug a line at both ends, pressurize with water, watch the gaugeBring to 15 psi; never exceed 20 psiProLeakTronics (2024)
Acoustic listeningLocation along a shell or pipeHydrophone in the water or a probe on the deck hears escaping waterMaker says its probe hears leaks through 6 feet of soil or concreteProLeakTronics (2026)
Tracer gasSpot to dig on a buried lineLine filled with a tracer gas; a sniffer finds where it surfaces5% hydrogen / 95% nitrogen, non-flammable, about 25% of the cost of heliumProAnderson Manufacturing (leaktools.com)

Sources: EPA; City of Mesa; Leslie’s (2022, updated 2025); LeakTronics pressure-test guide (2024); LeakTronics main drain guide (2026); Anderson Manufacturing. Download CSV

Dye testing only works up close. With the pump off and the water still, the dye has to be released within 1/4 inch of the suspected crack or gasket; a plume in the general area proves nothing (Leslie’s, citing Anderson Manufacturing). Leslie’s also notes light-niche leaks cannot be dye tested well, so a level that stops at the top of the light is the better clue.

Pressure testing isolates a line. The technician plugs the skimmer, main drain and return openings, fills one line from a hose through a regulator and watches the gauge: steady means sound, a drop means a leak (LeakTronics, September 18, 2024). LeakTronics sets a 15 psi target and a 20 psi ceiling for residential pool plumbing, and HomeGuide prices the test at $150 to $500.

Acoustic and tracer gas location marks the dig. A hydrophone such as the LeakTronics Pool Scope hears water escaping the shell, and a deck probe listens for the hiss of a pressurized line (LeakTronics). Tracer gas goes further under concrete: Anderson Manufacturing uses a non-flammable 5% hydrogen, 95% nitrogen mix that rises through soil and costs about 25% as much as helium (Anderson Manufacturing).

A residential equipment pad: Leslie's reports the most common pool pipe leaks sit just beneath the pad, where the pipes turn vertical.
A residential equipment pad: Leslie’s reports the most common pool pipe leaks sit just beneath the pad, where the pipes turn vertical.

How much does pool leak detection cost, and what does the repair cost?

HomeGuide puts pool leak detection at $400 to $1,000 for an inground pool and $100 to $500 for an above-ground pool (July 22, 2025). Repair after detection averages $500 to $1,500, with Fixr citing a $1,000 national average and a $5,000 high end for replastering a concrete pool (January 31, 2025).

Pool leak detection and repair prices with publisher and date (ranges as published, not PC&S quotes)
ItemPrice rangePublisherDate of figures
Leak detection, inground pool$400 to $1,000HomeGuideJuly 22, 2025
Leak detection, above-ground pool$100 to $500HomeGuideJuly 22, 2025
Pressure test of pool lines$150 to $500HomeGuideJuly 22, 2025
Pool inspection$200 to $500HomeGuideJuly 22, 2025
Leak repair, inground pool$500 to $1,500+ (up to $5,000 for extensive work)HomeGuideJuly 23, 2025
Leak repair, above-ground pool$250 to $1,000HomeGuideJuly 23, 2025
Leak repair, national average$1,000 (range $500 to $1,500; low $150, high $5,000)FixrJanuary 31, 2025
Professional patch repair$150 to $500HomeGuideJuly 23, 2025
Fitting or connection repair$50 to $300HomeGuideJuly 23, 2025
Skimmer leak repair$100 to $250FixrJanuary 31, 2025
Pool light leak repair$75 to $300 per lightFixrJanuary 31, 2025
Main drain repair$700 to $2,500HomeGuideJuly 23, 2025
Underground plumbing repair$1,000 to $4,000HomeGuideJuly 23, 2025
Excavation to reach a leak$100 to $300 per hourHomeGuideJuly 22, 2025
Draining and refilling$200 to $500+HomeGuideJuly 23, 2025

Sources: HomeGuide, pool leak detection cost (July 22, 2025); HomeGuide, pool leak repair cost (July 23, 2025); Fixr, swimming pool leak repair (January 31, 2025). Download CSV

Location drives the bill more than anything else. A fitting or connection repair runs $50 to $300, while underground plumbing repair runs $1,000 to $4,000 and main drain repair $700 to $2,500 (HomeGuide, 2025). Digging adds $100 to $300 an hour, which is why a pressure test and acoustic location come before any shovel. A shell that has failed across its surface becomes a resurfacing job, priced in our pool resurfacing cost guide.

Ask each company three things: whether the detection fee is credited against the repair, whether the price covers every line or only the first, and whether minor repairs found during the visit are included. HomeGuide notes some services include minor repairs. For pumps, heaters and other equipment found leaking at the pad, our pool repair guide lists component prices.

Will the water utility or homeowners insurance cover a pool leak?

Sometimes the utility, rarely the insurer. Cobb County Water System gives partial credits for repaired pool leaks once in a rolling 12 months, Hillsborough County, FL excludes pool repairs outright, and state regulators in Texas and Washington say most home policies exclude gradual leaks. Keep the repair receipt and your bucket-test notes either way.

How five water utilities treat a pool leak on the bill (policies read October 2026)
UtilityPool leak treatmentRules that decide the creditSource page
Cobb County Water System, GAPool leak credits accepted; the request asks for the volume of the poolPartial credit once in a rolling 12 months, on no more than 2 affected months; plumbing or parts receipt, or a letter on the fixcobbcounty.gov leak adjustment
City of Winter Park, FLLeak or Pool Fill Adjustment Application lists Pool Leak as a fill purposeRepair or parts receipt upload required; repairer can be a pool company or the ownercityofwinterpark.org application
City of Raleigh, NCOne pool fill a year (March to October) can have wastewater cut back to the monthly averageOne leak adjustment per 12 months, including a pool adjustment; base fees never adjustedraleighnc.gov leak adjustment (updated Aug 20, 2026)
City of Henderson, NVLeak Adjustment Program page does not mention pools; ask before you applyUse must exceed double the same period last year; up to 2 adjustments in 5 years; up to 3 billing cycles; apply within 12 monthscityofhenderson.com find a water leak
Hillsborough County, FLNo adjustment for any repair associated with a swimming poolAdjustment decisions in writing within 60 dayshcfl.gov request a leak adjustment

Sources: Cobb County Water System; City of Winter Park; City of Raleigh; City of Henderson; Hillsborough County. Download CSV

Insurance follows the sudden-versus-gradual line. The Texas Department of Insurance says most home policies cover sudden and accidental water damage, such as a burst pipe, but not damage from gradual leaks or seepage. The Washington Office of the Insurance Commissioner lists damage that develops over more than a couple of days as a maintenance problem insurers usually do not cover. Neither regulator addresses pools by name, so ask your insurer whether the pool sits under Other Structures coverage and whether its seepage exclusion applies.

How we compiled this

We read 25 outside sources in October 2026: 2 EPA WaterSense documents, 2 NOAA evaporation reports, 8 city, county or water-district pages, 2 state insurance regulators, 3 leak-detection equipment makers’ guides, 3 dated cost guides from HomeGuide and Fixr, and 5 pool-company or retailer articles that we quote only to test their claims. City evaporation and water rates come from our own evaporation and fill-cost research. We did not test pools ourselves and left out forum anecdotes; worked-example readings are labelled as examples.

Frequently Asked Questions

What is the most common cause of pool leaks?

Plumbing and fittings. The City of Mesa says pool leaks are more often caused by plumbing issues or bad seals around fittings than by the shell, and the EPA lists the liner, pump seal, piping, pool-to-pipe connections and pipe joints. Leslie’s reports the most common pipe leaks sit just beneath the equipment pad, where pipes turn vertical.

Are pool leaks covered by homeowners insurance?

Usually not when the leak is gradual. The Texas Department of Insurance says most home policies exclude damage from gradual leaks or seepage and cover sudden, accidental water damage such as a burst pipe. Before you file, ask your insurer if the pool falls under Other Structures coverage and how its seepage exclusion reads.

Is it normal to lose 1/2 inch of water a day in a pool?

Only in extreme conditions. Our NOAA-based model peaks at 0.39 inch a day in Las Vegas in July and 0.15 inch a day in San Diego, and the EPA treats more than 2 inches a week, or 3 inches in hot, dry areas, as a likely leak. A steady half inch a day (3.5 inches a week) calls for a bucket test (PC&S evaporation research).

How do you fix a leak in a pool without draining it?

Many leaks are fixed with water in the pool. HomeGuide says small vinyl liner holes can be patched with underwater repair kits and prices a professional patch at $150 to $500, and fittings or connections at $50 to $300 (HomeGuide, July 2025). Main drain work and resurfacing usually need draining, which HomeGuide prices at $200 to $500 or more.

How long can you leave a pool leak?

Every week costs water and money. A 0.5 inch a day leak in a 15 x 30 ft pool wastes 4,208 gallons in 30 days, about $35.94 at the median 25-city rate and $122.92 in Atlanta in October 2026 (PC&S ledger). Utilities such as Henderson, NV only consider credits applied for within 12 months of the leak.

How much does it cost to find a leak in a pool?

HomeGuide lists $400 to $1,000 for an inground pool and $100 to $500 for an above-ground pool, with a separate pressure test at $150 to $500 (HomeGuide, July 22, 2025). Run the free 24-hour EPA bucket test first: if the pool and bucket drop the same amount, you can skip the visit.

Sources

  1. U.S. Environmental Protection Agency. Jump Into Pool Water Efficiency (WaterSense pool guide). Accessed 2026-10-19.
  2. U.S. Environmental Protection Agency. Pool Water Efficiency. Accessed 2026-10-19.
  3. NOAA National Weather Service. NOAA Technical Report NWS 34: Mean Monthly, Seasonal and Annual Pan Evaporation. Accessed 2026-10-19.
  4. NOAA National Weather Service. NOAA Technical Report NWS 33: Evaporation Atlas. Accessed 2026-10-19.
  5. City of Mesa, Arizona. Is Your Pool Leaking?. Accessed 2026-10-19.
  6. Olivenhain Municipal Water District. Pool: Frequently Asked Questions. Accessed 2026-10-19.
  7. Town of Flower Mound, Texas. Pool Evaporation. Accessed 2026-10-19.
  8. HomeGuide. Pool Leak Detection Cost. Accessed 2026-10-19.
  9. HomeGuide. Pool Leak Repair Cost. Accessed 2026-10-19.
  10. Fixr. How much does it cost to fix a swimming pool leak?. Accessed 2026-10-19.
  11. LeakTronics. How to Pressure Test Pool Lines. Accessed 2026-10-19.
  12. LeakTronics. Pool Main Drain Leak Detection: Contractor's Guide. Accessed 2026-10-19.
  13. Anderson Manufacturing (Leak Tools). Tracer Gas Detection. Accessed 2026-10-19.
  14. Leslie's. How to Find and Fix a Pool Leak in 3 Easy Steps (read via Wayback Machine snapshot; live page blocks automated access). Accessed 2026-10-19.
  15. Latham Pool Products. Is It Evaporation or a Leak?. Accessed 2026-10-19.
  16. American Leak Detection. Pools, Spas & Fountain Leak Detection. Accessed 2026-10-19.
  17. American Leak Detection. Pool Evaporation or a Leak? How to Tell in Tucson. Accessed 2026-10-19.
  18. Alan Smith Pools. How to Find and Fix a Pool Leak. Accessed 2026-10-19.
  19. Cobb County Water System. Leak Adjustment. Accessed 2026-10-19.
  20. City of Winter Park, FL. Leak or Pool Fill Adjustment Application. Accessed 2026-10-19.
  21. City of Raleigh, NC. Request an Adjustment on Your Utility Bill. Accessed 2026-10-19.
  22. City of Henderson, NV. Find a Water Leak (Leak Adjustment Program). Accessed 2026-10-19.
  23. Hillsborough County, FL. Request a Leak Adjustment. Accessed 2026-10-19.
  24. Texas Department of Insurance. When are water damage and mold covered by insurance?. Accessed 2026-10-19.
  25. Washington Office of the Insurance Commissioner. Leaks, water damage and mold. Accessed 2026-10-19.
  26. Pool Construction & Service. Pool Evaporation Rate by City (PC&S research). Accessed 2026-10-19.
  27. Pool Construction & Service. Cost to Fill a Pool in 25 US Cities (PC&S research). Accessed 2026-10-19.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.