
How Long Does It Take to Fill a Pool? Fill Times by Hose, Meter, Well and Water Truck
How long does it take to fill a pool? About 20 to 28 hours for 20,000 gallons through one 5/8 inch garden hose at 12 to 17 gpm, or about 5 hours by fire company tanker.
- ✓Fill-time table6 pool sizes at 6 published flow rates, from 5 to 23 gpm.
- ✓Meter limitsWhy a second hose rarely helps on a 5/8 inch meter (20 gpm).
- ✓Tanker pricesLoad sizes and per-load prices from six fire companies and towns.
Key takeaways
- Fill time in hours is gallons divided by gallons per minute, divided by 60: a 20,000 gallon pool takes 19.6 to 27.8 hours through one 5/8 inch hose at the 12 to 17 gpm Flexzilla lists for a 50 ft hose.
- The water meter caps extra hoses: the City of Ann Arbor rates a 5/8 inch meter at 20 gpm maximum continuous flow, 3/4 inch at 30 gpm and 1 inch at 50 gpm.
- Fire company tankers carry 2,000 to 3,500 gallons a load for $75 to $200 (Mapleton, MN; Sudlersville, MD), and 29 Fire Rescue needs about 45 minutes per 3,000 gallon load.
- A private well is the slow option: Connecticut DPH says private wells usually pump under 10 gpm, and a family of 4 uses about 300 gallons a day on top of the fill.
- New plaster needs a nonstop fill: the National Plasterers Council warns that any interruption can leave a ring at the level where the water stopped.
How long does it take to fill a pool with a hose?
About 2.5 to 11.3 hours for a 12 ft round above ground pool and 12.5 to 57.7 hours for a 16 x 32 ft inground pool, with one hose at 5 to 23 gpm. Divide the gallons by the hose’s gallons per minute, then by 60. A 5/8 inch hose at 12 to 17 gpm fills 20,000 gallons in 19.6 to 27.8 hours.
| Pool | Gallons (City of Akron) | 5 gpm: 1/2 in hose, low (hours) | 9 gpm: 1/2 in hose, high (hours) | 12 gpm: 5/8 in hose, low (hours) | 17 gpm: 5/8 in hose, high (hours) | 20 gpm: 5/8 in meter limit (hours) | 23 gpm: 3/4 in hose, high (hours) |
|---|---|---|---|---|---|---|---|
| 12 ft round above ground, 52 in wall | 3,398 | 11.3 | 6.3 | 4.7 | 3.3 | 2.8 | 2.5 |
| 18 ft round above ground, 52 in wall | 8,602 | 28.7 | 15.9 | 11.9 | 8.4 | 7.2 | 6.2 |
| 24 ft round above ground, 52 in wall | 13,594 | 45.3 | 25.2 | 18.9 | 13.3 | 11.3 | 9.9 |
| 16 x 32 ft inground, 4.5 ft average depth | 17,300 | 57.7 | 32.0 | 24.0 | 17.0 | 14.4 | 12.5 |
| 18 x 36 ft inground, 4.5 ft average depth | 21,900 | 73.0 | 40.6 | 30.4 | 21.5 | 18.2 | 15.9 |
| 20 x 40 ft inground, 5 ft average depth | 30,000 | 100.0 | 55.6 | 41.7 | 29.4 | 25.0 | 21.7 |
Sources: gallons from the City of Akron table; hose flow from Flexzilla; meter limit from the City of Ann Arbor; PC&S arithmetic, November 2026. Download CSV
Source: Flexzilla; City of Ann Arbor; Connecticut DPH; 29 Fire Rescue; PC&S arithmetic, November 2026. Download chart data (CSV)
| Step | Value | Source |
|---|---|---|
| Pool | 16 x 32 ft inground, 4.5 ft average depth | City of Akron |
| Gallons | 17,300 | City of Akron |
| Bucket test: 5 gallons in 25 seconds | 12 gpm | Hoselink method (gallons / minutes) |
| Minutes | 17,300 / 12 = 1,441.7 | PC&S arithmetic |
| Hours | 1,441.7 / 60 = 24.0 | PC&S arithmetic |
| With a second hose on a 3/4 in meter (up to 24 gpm) | 12.0 hours | City of Ann Arbor meter limit 30 gpm |
| Water cost at the 25-city median of $10.75 per 1,000 gallons | $185.98 | PC&S cost to fill a pool ledger, Oct 2026 |
Sources: City of Akron; Hoselink bucket method; City of Ann Arbor; PC&S cost to fill a pool ledger. Download CSV
Gallons are the other input, and our pool volume calculator gives them for any shape. Gallons for every above ground round and oval are in our above ground pool sizes guide. The table uses the City of Akron figures: 17,300 gallons for a 16 x 32 ft pool at a 4.5 ft average depth and 13,594 for a 24 ft round above ground pool with a 52 inch wall.
How many gallons per minute does a garden hose put out?
Usually 12 to 17 gpm for a 50 ft, 5/8 inch hose, the most common size, per Flexzilla; 5 to 9 gpm for 1/2 inch and 18 to 23 gpm for 3/4 inch. Calculated figures run higher: Hoselink lists 24 gpm for 50 ft of 5/8 inch hose at 45 psi. Length, pressure and kinks pull the number down.
| Source | 1/2 in hose | 5/8 in hose | 3/4 in hose | Conditions | Type of figure |
|---|---|---|---|---|---|
| Flexzilla (hose maker) | 5 to 9 gpm | 12 to 17 gpm | 18 to 23 gpm | 50 ft hose at standard residential pressure | Maker's approximate range |
| Hoselink (hose maker) | 13 gpm | 24 gpm | 38 gpm | 50 ft hose at 45 psi | Calculated |
| Hoselink (hose maker) | 9.8 gpm | 18 gpm | 28.5 gpm | 75 ft hose at 45 psi | Calculated |
| City of Highfill, AR | Not stated | 12 to 15 gpm | Not stated | "A typical 5/8 in garden hose" | Utility water audit guidance |
| Oregon City, OR | 24 gpm at 25 ft; 6 gpm at 100 ft | About 17 gpm (1,020 gallons an hour on a sprinkler) | Not stated | 40 psi faucet for the 1/2 in figures | City guidance |
Sources: Flexzilla; Hoselink; City of Highfill, AR; Oregon City, OR. Accessed 2026-11-10. Download CSV
Source: Flexzilla; Hoselink; City of Highfill, AR; accessed 2026-11-10. Download chart data (CSV)
Length costs flow. Hoselink‘s 5/8 inch figure falls from 24 gpm at 50 ft to 18 gpm at 75 ft, and Oregon City gives 24 gpm for 25 ft of 1/2 inch hose but 6 gpm for 100 ft at 40 psi. House pressure usually sits between 40 and 60 psi in Oregon City’s guidance and 35 to 65 psi in Hoselink’s, so use the shortest hose that reaches.
How do you measure your own hose flow? Time a 5 gallon bucket at the end of the hose you will use, with the tap fully open. Divide gallons by minutes: a bucket that fills in 30 seconds means 10 gpm (Hoselink), and one that fills in 25 seconds means 12 gpm. Use that number in the table instead of a published range.
Does a second hose fill a pool faster?
Only if the water meter has room. Ann Arbor rates a 5/8 inch meter at 20 gpm maximum continuous flow, so one 12 to 17 gpm hose already uses most of it. A 3/4 inch meter (30 gpm) can feed about two hoses and a 1 inch meter (50 gpm) about three, cutting 20,000 gallons to 11.1 or 6.7 hours.
| Water meter size | Maximum continuous flow | Pressure lost at that flow | Hoses at 12 to 17 gpm it can feed | 20,000 gallons at the meter limit |
|---|---|---|---|---|
| 5/8 in | 20 gpm | 8 psi | One (a second hose adds little) | 16.7 hours |
| 3/4 in | 30 gpm | 8.9 psi | About two | 11.1 hours |
| 1 in | 50 gpm | 5.5 psi | About three | 6.7 hours |
Sources: City of Ann Arbor, Water Service Line and Meter Sizing (2019); Flexzilla; PC&S arithmetic. Download CSV

Your meter size is printed on the meter or the water bill. Doughboy’s install manual lists 2 or 3 garden hoses for the fill, which works on the larger meters above. Two hoses on two spigots still share one meter. If the house is on a well, the well pump, not the meter, sets the ceiling.
How long does a water truck take to fill a pool, and what does it cost?
A few hours instead of a day. Fire company tankers carry 2,000 to 3,500 gallons a load, and 29 Fire Rescue needs about 45 minutes per 3,000 gallon load, so 20,000 gallons takes 7 loads and about 5.25 hours. At $75 to $200 a load, that is $750 to $1,600, against a 25-city median of $215.09 for tap water.
| Provider (and year) | Gallons per load | Price per load | Loads for 20,000 gallons | Cost for 20,000 gallons | Notes |
|---|---|---|---|---|---|
| Sudlersville Volunteer Fire Company, MD (summer 2026) | 3,500 | $150 in district; $200 outside | 6 | $900 to $1,200 | Tanker 6 |
| 29 Fire Rescue, Jefferson Township (Lackawanna County area, PA) | 3,000 | $150 in township; $200 outside | 7 | $1,050 to $1,400 | About 45 minutes per load; often lake water |
| Womelsdorf Volunteer Fire Company, PA | 2,500 | $150 minimum donation; $200 outside the borough | 8 | $1,200 to $1,600 | Donation basis |
| Mapleton Fire Department, MN | 2,000 | $75 (water, equipment, labor) | 10 | $750 | Residents |
| City of Milaca, MN (2026 draft ordinance) | 3,000 | $150 | 7 | $1,050 | First reading, not yet passed |
| Pennington Fire Company | 3,500 | Not published | 6 | Not published | Township residents |
Sources: Sudlersville VFC; 29 Fire Rescue; Womelsdorf VFC; Mapleton, MN; City of Milaca; Pennington Fire Company. Accessed 2026-11-10. Download CSV

| One 5/8 in garden hose | Two hoses, 3/4 in meter | Private well at 5 gpm | Fire company tanker, 3,000 gal loads | |
|---|---|---|---|---|
| Flow or pace | 12 to 17 gpm | Up to 30 gpm | 5 gpm | About 45 minutes per load |
| Time for 20,000 gallons | 19.6 to 27.8 hours | 11.1 hours | 66.7 hours | About 5.25 hours (7 loads) |
| Cost for 20,000 gallons | $39.00 to $649.98 (25-city median $215.09, Oct 2026) | Same water bill | Pump electricity only | $750 to $1,600 at the per-load prices above |
| Watch out for | Drought fill bans | Meter limit | Under 10 gpm is usual; 300 gallons a day for a family of 4 | Lake water on some loads; vinyl liner makers say fill slowly |
Sources: Flexzilla; City of Ann Arbor; Connecticut DPH; 29 Fire Rescue; PC&S cost to fill a pool ledger. Download CSV
Some hauler pages promise more: Taylor Farms Water Hauling says a delivery service can usually fill 10,000 to 30,000 gallons within 1 to 3 hours. At 29 Fire Rescue’s 45 minutes per 3,000 gallon load, 30,000 gallons is 10 loads and about 7.5 hours for one truck, so the shorter figure assumes several trucks or larger ones. Ask how many trucks and what water source: 29 Fire Rescue says its loads are often lake water. Tap water cost by city is in our cost to fill a pool research.
How long does it take to fill a pool from a well?
Days rather than hours. Connecticut DPH says private wells usually pump under 10 gpm, so 20,000 gallons takes 33.3 hours at 10 gpm and 66.7 hours at 5 gpm. The household still needs water: DPH plans 75 gallons a day per person, about 300 gallons a day for a family of 4.
Find your well’s yield on the driller’s log or a pump test before you start. Connecticut DPH Publication No. 28 (June 2009) notes that many wells lose yield over time and that existing private wells have no yield test requirement, so an old figure may be optimistic. Spread a large fill over several days if the pressure drops or the water turns cloudy, and test the fill water for metals before the first chemical dose, as the National Plasterers Council advises for any fill.
Does the type of pool change how you fill it?
Yes. Vinyl liners fill slowly with a pause at 1 to 2 inches to smooth wrinkles (Doughboy), and Intex frame pools stop at 1 inch to check level. New plaster is the opposite: the National Plasterers Council wants a nonstop fill to the middle of the skimmer, with a cloth on the hose end and 24 inches of water before any truck load.

How long does it take to fill an above ground pool? From 3.3 hours for a 12 ft round at 17 gpm to 18.9 hours for a 24 ft round at 12 gpm, using the City of Akron gallons for 52 inch walls. Doughboy says to tape a sock over the hose end, smooth the floor at 1 to 2 inches of water and never pull the liner with more than 4 inches on it. LinerWorld says not to use a water truck on its liners, or to fill as slowly as possible if you must. The full sequence is in our guide on how to set up an above ground pool.
For plaster and other cement finishes, the National Plasterers Council White Paper 6 says the water must run continuously, uninterrupted and as fast as possible until it reaches the middle of the skimmer, because a stop can leave a discolored ring and more shrinkage cracking above the line. It also rules out soft water and reverse osmosis water for the fill. Refilling after a drain follows the same rules; the drain side is in our guide on how to drain a pool, and for vinyl in our guide on how to drain an above ground pool.
Which fill method should you use?
Use one hose for vinyl and frame pools and on any 5/8 inch meter, which tops out at 20 gpm. Add hoses only with a 3/4 or 1 inch meter. Book a tanker for a large pool on a deadline or new plaster that must fill without stopping, and check the well yield before using a well. The table sets each threshold.
| If your situation is | Do this | Why (source) |
|---|---|---|
| Vinyl liner pool, new or refilled | Use a hose; smooth wrinkles at 1 to 2 in of water, never pull with more than 4 in | Doughboy; LinerWorld says avoid water trucks or fill as slowly as possible |
| Frame pool, first fill | Stop at 1 in and check the water is level before filling on | Intex Metal Frame manual |
| New plaster or other cement finish | Fill without stopping to the middle of the skimmer; cloth on the hose end | National Plasterers Council |
| New plaster and a water truck | Put 24 in of water in the deep end first, then let the truck water cascade in | National Plasterers Council |
| Over 20,000 gallons and a deadline under a day | Book a tanker; one 3,000 gallon load takes about 45 minutes | 29 Fire Rescue |
| 5/8 in water meter | One hose is enough; a second adds little above 20 gpm | City of Ann Arbor meter table |
| Private well | Check the yield first; most give under 10 gpm and the house needs about 300 gallons a day | Connecticut DPH |
| Your utility is in a drought stage | Check for a fill ban before you start | PC&S filling restrictions research |
Sources: Doughboy; LinerWorld; Intex; National Plasterers Council; 29 Fire Rescue; City of Ann Arbor; Connecticut DPH; PC&S pool filling restrictions research. Download CSV
Check the rules before the first gallon. Our pool filling restrictions study found 15 of 32 utilities and state rules can ban pool fills at some drought stage, and 4 had a ban in force on October 8, 2026. The bill for the water itself ranged from $39.00 to $649.98 for 20,000 gallons across 25 cities in our cost to fill a pool ledger.
| Number | Value | Source |
|---|---|---|
| Fill time formula | Gallons / gpm / 60 = hours | PC&S arithmetic |
| 5/8 in garden hose, 50 ft | 12 to 17 gpm | Flexzilla |
| 5/8 in water meter, maximum continuous flow | 20 gpm | City of Ann Arbor |
| 20,000 gallons, one 5/8 in hose | 19.6 to 27.8 hours | PC&S arithmetic |
| Fire company tanker load | 2,000 to 3,500 gallons | Mapleton; Sudlersville |
| Tanker price per load | $75 to $200 | Mapleton; Sudlersville; 29 Fire Rescue; Womelsdorf |
| Private well yield | Usually under 10 gpm | Connecticut DPH |
Sources: Flexzilla; City of Ann Arbor; Mapleton; Sudlersville VFC; 29 Fire Rescue; Womelsdorf VFC; Connecticut DPH. Download CSV
How we compiled this
We read 17 primary documents in November 2026: hose flow data from Flexzilla, Hoselink, the City of Highfill and Oregon City; the City of Ann Arbor meter sizing table; Connecticut DPH well guidance; pool-fill price pages from five fire companies and the City of Milaca; the National Plasterers Council fill white paper; and the Doughboy, Intex, Santorini and LinerWorld manuals. Gallons come from the City of Akron and water prices from our own utility rate ledger. Fill times are our arithmetic; we did not fill a pool or time a hose.
Frequently Asked Questions
How long does it take to fill a pool with a hose?
Gallons divided by gpm, divided by 60. One 50 ft, 5/8 inch hose at Flexzilla’s 12 to 17 gpm fills 20,000 gallons in 19.6 to 27.8 hours, a 24 ft round above ground pool (13,594 gallons) in 13.3 to 18.9 hours, and a 16 x 32 ft inground pool (17,300 gallons) in 17.0 to 24.0 hours.
How long does it take to fill a 20,000 gallon pool?
About 19.6 to 27.8 hours with one 5/8 inch hose, 11.1 hours with two hoses on a 3/4 inch meter rated 30 gpm, 66.7 hours from a well pumping 5 gpm, and about 5.25 hours by tanker: 7 loads of 3,000 gallons at 29 Fire Rescue’s pace of about 45 minutes a load.
How long does it take to fill a 15,000 gallon pool?
14.7 to 20.8 hours with one 5/8 inch garden hose at 12 to 17 gpm, and 12.5 hours at the 20 gpm a 5/8 inch water meter allows (City of Ann Arbor). A 1/2 inch hose at 5 to 9 gpm needs 27.8 to 50.0 hours. A tanker needs 5 loads of 3,000 gallons.
Will two hoses fill a pool faster?
Only with a bigger meter. Ann Arbor rates a 5/8 inch meter at 20 gpm maximum continuous flow, so one hose at 12 to 17 gpm uses most of it. On a 3/4 inch meter (30 gpm) two hoses can cut a 20,000 gallon fill to about 11.1 hours, and on a 1 inch meter (50 gpm) to 6.7 hours.
Is it faster to fill a pool with a water truck?
Yes, by about a day. Fire company tankers carry 2,000 to 3,500 gallons, and 29 Fire Rescue needs about 45 minutes per 3,000 gallon load, so 20,000 gallons takes about 5.25 hours. It costs more: $750 to $1,600 at $75 to $200 a load, against a 25-city median of $215.09 for tap water.
Can you leave a hose running overnight to fill a pool?
For plaster, the National Plasterers Council says the fill should run nonstop to the middle of the skimmer, overnight included. For vinyl, stay for the start: Doughboy smooths wrinkles at 1 to 2 inches and Intex checks level at 1 inch. Above ground pools stop halfway up the skimmer opening (Santorini), so check the level before bed.
Sources
- Flexzilla. How to Choose Garden Hose Diameter. Accessed 2026-11-10.
- Hoselink. Garden Hose Flow Rate: GPM Explained. Accessed 2026-11-10.
- City of Oregon City, Oregon. Garden hoses and water use guidance. Accessed 2026-11-10.
- City of Highfill, Arkansas. Do-It-Yourself Residential Customer Water Audit. Accessed 2026-11-10.
- City of Ann Arbor, Michigan. Water Service Line and Meter Sizing (May 2019). Accessed 2026-11-10.
- Connecticut Department of Public Health. Publication No. 28: Private Well Guidance for Determining Well Safe Yield. Accessed 2026-11-10.
- Sudlersville Volunteer Fire Company. Pool Fills: Summer 2026. Accessed 2026-11-10.
- 29 Fire Rescue. Pool Fills. Accessed 2026-11-10.
- Womelsdorf Volunteer Fire Company. Pool filling. Accessed 2026-11-10.
- City of Mapleton, Minnesota. Pool Fills. Accessed 2026-11-10.
- City of Milaca, Minnesota. Ordinance 555, Pool Filling Rates (1st reading). Accessed 2026-11-10.
- Pennington Fire Company. Pool Fills. Accessed 2026-11-10.
- National Plasterers Council. White Paper 6: Tips on Filling the Pool and Initial Start Up. Accessed 2026-11-10.
- Doughboy. Round pool assembly and installation instructions. Accessed 2026-11-10.
- Intex. Metal Frame Pool owner's manual (87PO, 2022). Accessed 2026-11-10.
- LinerWorld. Liner Installation Instruction Manual. Accessed 2026-11-10.
- Santorini (via The Home Depot). Aboveground pool manual AGP1800/AGP2400. Accessed 2026-11-10.
- City of Akron, Ohio. How to calculate the gallons in a swimming pool. Accessed 2026-11-10.
- Taylor Farms Water Hauling. How long does it take to fill a swimming pool with bulk water delivery. Accessed 2026-11-10.
- PC&S research. Cost to Fill a Pool in 25 US Cities. Accessed 2026-11-10.
- PC&S research. Pool Filling Restrictions. Accessed 2026-11-10.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.