
Travertine Pool Deck: Grades, Thickness, Salt Water Sealing and Cost
A travertine pool deck costs $20 to $34 per square foot installed for tumbled 1.25 inch pavers (AE Outdoor Living, 2026); sand set them on 4 inches of compacted rock and seal before salt.
- ✓Priced from sellersGrades and finishes priced from three online sellers on November 8, 2026.
- ✓Install specsBase, bed and thickness from a published install guide and a stone seller.
- ✓Salt rulesChlorinator warranty text and a sealer data sheet, quoted.
Key takeaways
- A travertine pool deck costs $20 to $34 per square foot installed for tumbled, unfilled pavers in Phoenix, or $26 to $40 for premium stone, per AE Outdoor Living (read November 2026).
- Tumbled travertine pavers sell for $4.25 (Standard) to $4.95 (Premium) per square foot as material at Megastone USA on November 8, 2026, in 1.25 inch and 2 inch thicknesses.
- Sand-set pavers need at least 4 inches of compacted crushed rock and a 1 inch sand bed, according to the AquaBella hardscape install guide; TravertineMart calls sand set the only recommended method in freeze-thaw climates.
- The 2024 ISPSC Section 306.2 sets a 0.42 wet DCOF where a deck is tested, yet the one travertine data sheet we found, from Mandarin Stone, declares no slip value.
- Hayward’s AquaRite warranty excludes degradation of natural stone next to a pool, per its AquaRite S3 manual, so salt pools need a salt-rated sealer before the first salt goes in.
- A 600 sq ft travertine pool deck with 96 ft of coping plans at $15,840 to $26,160 installed, using AE and River Pools rates (PC&S arithmetic).
Is travertine good for a pool deck?
Yes, if you buy tumbled 1.25 inch pavers, set them on a drained base and seal them before salt reaches them. Travertine is a porous limestone sold under ASTM C1527/C1527M-23, which tests absorption, density, compressive strength, modulus of rupture, abrasion and flexural strength. Its scope names no freeze-thaw test, and sellers rarely publish wet slip results.
What is travertine? It is a banded calcium carbonate stone sold as dimension stone under ASTM C1527/C1527M-23, the Standard Specification for Travertine Dimension Stone. ASTM’s abstract lists six physical requirements: absorption by weight, density, compressive strength, modulus of rupture, abrasion resistance and flexural strength. The numeric limits sit in the paid standard; we could not open the current table, so we do not print its values here. Ask the supplier for a test report against the exterior use class.
A real data sheet shows what to look for. Mandarin Stone‘s Silver Tumbled Travertine sheet lists water absorption of 0.67% by mass, open porosity of 7.71%, apparent density of 2.47 g/cm3 and mean flexural strength of 8.31 MPa, tested to European EN methods. The same sheet marks wet and dry slip resistance and flexural strength after freezing as NPD, no performance declared.
| Number | What it is | Source and date |
|---|---|---|
| $20 to $34 per sq ft | Installed tumbled, unfilled travertine pavers in a French pattern, Phoenix | AE Outdoor Living, read Nov 2026 |
| $26 to $40 per sq ft | Installed premium travertine (Silver, Walnut, Ivory) with 6 cm coping pieces, Phoenix | AE Outdoor Living, read Nov 2026 |
| $4.25 to $4.95 per sq ft | Tumbled travertine pavers, material only, Standard to Premium grade | Megastone USA, Nov 8, 2026 |
| 1.25 in (3 cm) | Paver thickness sold for pool decks; 2 in (5 cm) for coping and wall caps | TravertineMart; AquaBella, Nov 2026 |
| 4 in rock + 1 in sand | Minimum crushed rock base and screeded sand bed for sand-set pavers | AquaBella hardscape install guide (2024) |
| 0.42 wet DCOF | Minimum where a deck surface is tested wet (ISPSC 306.2, ANSI A326.3 method) | ISPSC 2024 |
| 475 sq ft per gal | Maximum coverage of STONETECH Salt Water Resistant Sealer; 72 h full cure | LATICRETE DS-288-1026 |
| Up to 5 years | Expected wear of that sealer around salt water pools | LATICRETE DS-288-1026 |
Sources: AE Outdoor Living, Megastone USA, TravertineMart, AquaBella, ISPSC 2024, LATICRETE DS-288-1026. Download CSV

Travertine is one of ten deck surfaces compared on slip, heat and freeze rules in our pool deck materials guide.
Which travertine grade and finish should you buy for a pool deck?
Buy tumbled or brushed travertine for a wet deck, not honed or polished, which AE Outdoor Living says are generally not chosen for pool sides. Premium grade costs $0.40 to $0.60 more per square foot than Standard at Megastone (November 2026). Filling is a look choice: filled faces are smoother, unfilled faces keep open holes that hold dirt.
| Option | What it means | Material price per sq ft (seller, date) | Pool deck fit | Source |
|---|---|---|---|---|
| Premium grade (Premium Select) | Seller's top sort: fewer holes, chips and color swings | $4.85 Ivory, $4.95 Silver tumbled (Megastone, Nov 8, 2026); $5.09 Ivory Swirl 16×24 (TravertineMart, Nov 8, 2026) | Recommended by TravertineMart for a salt water pool in Iowa | Megastone; TravertineMart |
| Standard grade | Seller's second sort of the same stone | $4.25 Ivory, $4.55 Silver tumbled (Megastone); $4.49 Roman Walnut Blend (TravertineMart) | Same thickness; ask what the grade allows in writing | Megastone; TravertineMart |
| Tumbled finish | Edges and face rolled to a rough, worn texture | $7.99 Gold 12×12 tile, $9.95 Durango 12×12 tile (TMD, Nov 8, 2026) | Commonly chosen for wet pool decks (AE Outdoor Living) | TMD; AE Outdoor Living |
| Filled and honed | Holes filled with cement or resin, face ground flat and matte | $7.99 Gold 12×12, $9.95 Durango 12×12 (TMD) | Smoother; AE says honed or polished finishes are generally not chosen for wet pool areas | TMD; AE Outdoor Living |
| Filled and polished | Filled and ground to a gloss | $8.45 Gold 12×12 (TMD) | Avoid on a wet deck (AE Outdoor Living) | TMD; AE Outdoor Living |
| Unfilled, brushed and chiseled | Natural holes left open, wire-brushed face, chipped edges | $9.49 Antico Onyx Versailles pattern (TMD) | Textured; open holes collect dirt and need cleaning | TMD |
| 1.25 in (3 cm) paver | Paver thickness for sand-set decks | $3.99 pre-order or $5.09 in stock, Ivory Swirl 16×24 (TravertineMart) | Pool decks, patios, walkways (TravertineMart) | TravertineMart; AquaBella |
| 2 in (5 cm) piece | Coping, stair treads, wall caps | $7.99 pre-order, Ivory Swirl 16×24 (TravertineMart) | Pool edges and raised wall caps (AquaBella) | TravertineMart; AquaBella |
| About 1/2 in tile | Thin tile sold by the sq ft for mortar setting on a slab | $6.95 to $12.95 (TMD outdoor travertine tile collection) | Only over a sound concrete slab | TMD |
Sources: Megastone USA, TravertineMart, Tile & Mosaic Depot, AE Outdoor Living, AquaBella, all read November 8, 2026. Download CSV
Pavers are 1.25 in thick; TMD items are tiles sold for mortar setting. Tile prices are per square foot of tile, not per pound of stone.
Source: Megastone USA, TravertineMart and Tile & Mosaic Depot listings, read November 8, 2026. Download chart data (CSV)
Grade is a seller’s sort, not a standard. Megastone prices Ivory tumbled pavers at $4.85 per square foot in Premium and $4.25 in Standard, and Silver at $4.95 and $4.55 (November 8, 2026). TravertineMart sells most pavers as Premium Select and one Roman Walnut Blend as Standard Grade at $4.49 in stock. Ask the seller what each grade allows in holes, chips and color range before you order.
Thin tile costs more per square foot than pavers because of extra cutting and finishing. Tile & Mosaic Depot lists Gold 12×12 tumbled tile at $7.99 and filled and polished at $8.45, against $4.25 to $5.09 for 1.25 inch pavers at Megastone and TravertineMart. Tile goes only on a slab; pavers go on sand or a slab.
How thick should travertine pavers be, and should they be sand set or mortar set?
Use 1.25 inch (3 cm) pavers for the deck and 2 inch (5 cm) pieces for coping or wall caps, per TravertineMart and AquaBella. Sand set them on at least 4 inches of compacted crushed rock and a 1 inch sand bed. Mortar set only over a sound slab, with flexible mortar where winters freeze.
| Item | Sand set (dry set) | Mortar set (mud set) | Source |
|---|---|---|---|
| Substrate | Compacted crushed stone base | Existing sound concrete slab | TravertineMart pavers page |
| Paver thickness | 1.25 in (3 cm) pavers | 1.25 in pavers or thinner tile on the slab | TravertineMart; TMD |
| Dig depth | At least 7 3/8 in below the finished surface string line | None beyond slab prep | AquaBella guide |
| Base | Crushed rock at least 4 in deep, compacted every 2 in | The slab itself | AquaBella guide |
| Bedding layer | 1 in coarse concrete sand, screeded on 1 in PVC pipe, not compacted before laying | Flexible mortar bed; about 1 in under coping | AquaBella; TravertineMart |
| Joints | Tight butt joints; polymeric sand suggested | Mortar or grout joints | AquaBella guide |
| Freeze-thaw climates | The only method TravertineMart recommends | Only with a flexible mortar such as Flex-Bond | TravertineMart knowledgebase |
| Drainage slope | At least 1/8 in per ft for residential travertine pavers | Same | ISPSC 2024 Table 306.5 |
Sources: AquaBella hardscape install guide (2024), TravertineMart, TravertineMart knowledgebase, ISPSC 2024 Table 306.5. Download CSV

- Set string lines and digDig at least 7 3/8 inches below the finished-surface string line (AquaBella), and plan a fall of at least 1/8 inch per foot away from the pool (ISPSC Table 306.5).
- Build the basePlace crushed rock at least 4 inches deep and compact it in 2 inch lifts (AquaBella).
- Screed the sandScreed 1 inch of coarse concrete sand on two 1 inch PVC pipes; do not walk on it, and screed only what you can cover that day (AquaBella).
- Lay and compact the paversLay 1.25 inch pavers tight, sweep polymeric sand into the joints and set them with a hand tamper or rubber mallet (AquaBella).
- Set the copingSet 2 inch coping on a mortar bed of about 1 inch with a 2% fall away from the water (TravertineMart; AquaBella).
- Seal before saltBrush a penetrating sealer, let it soak 15 to 20 minutes, wipe the excess and keep water off for 72 hours (LATICRETE DS-288-1026).
Base depth is rarely published by installers. AE Outdoor Living, read November 8, 2026, says base depth, joints and drainage go into each written proposal, so hold every bid to the AquaBella minimum of 4 inches of rock compacted in 2 inch lifts. Questions to ask bidders are on our pool deck contractors page.
Is travertine slippery when wet or hot in the sun?
Tumbled travertine is commonly chosen for wet decks, but slip claims rarely come with test data: the Mandarin Stone sheet lists NPD for slip. Where a deck is tested wet, ISPSC 306.2 asks for DCOF 0.42. Heat follows color, not the stone name; conventional pavements reach 120 to 150 F in summer (EPA).
| What we looked for | What the source shows | Source |
|---|---|---|
| Code minimum for wet slip | Deck surfaces slip resistant; where tested wet, DCOF 0.42 (ANSI A326) or pendulum class P4 | ISPSC 2024 Section 306.2 |
| Test standard for pool decks | No single DCOF limit for pool decks; 0.55 wet is the informative figure for level exterior wet floors | ANSI A326.3-2021 |
| A travertine data sheet | Silver Tumbled Travertine: slip resistance wet and dry both listed as NPD (no performance declared) | Mandarin Stone data sheet |
| Closest lab result for a tumbled natural stone | Aspen White tumbled marble (not travertine): wet DCOF 0.43 to 0.47 by specimen, 0.45 average, NSI lab, tested April 26, 2023 | Natural Stone Institute report for StoneHardscapes |
| Peak pavement heat | Conventional pavements reach 120 to 150 F in summer | EPA Cool Pavements compendium |
| Effect of color | One paver finish runs from SRI 6 in black to SRI 67 in white | Techo-Bloc SRI sheet, 2025 |
| Travertine heat data | No travertine seller in our source set published solar reflectance or a surface temperature | AE Outdoor Living; TravertineMart; Megastone; TMD (read Nov 2026) |
Sources: ISPSC 2024, ANSI A326.3-2021, Mandarin Stone, NSI test report for StoneHardscapes, EPA, Techo-Bloc. Download CSV
The closest lab number we found is for marble, not travertine. The Natural Stone Institute tested Aspen White tumbled marble on a BOT 3000E tribometer in wet condition and averaged 0.45 DCOF, above the 0.42 criterion (NSI report, April 2023). Treat that as proof that tumbled stone can be tested, not as a travertine result, and ask your seller for a wet DCOF report on the exact product.
On heat, the EPA says solar reflectance is the main driver of peak pavement temperature, and one Techo-Bloc paver finish runs from SRI 6 in Onyx Black to SRI 67 in Pure White (Techo-Bloc, 2025). Light Ivory travertine should run cooler than Walnut or Noce, but no seller we read publishes a number. Coatings with published SRI values are compared in our cool deck guide.
Does salt water damage a travertine pool deck?
It can. Hayward’s AquaRite warranty excludes degradation of natural stone in or next to a pool, and its manual tells owners to consult a stone installation specialist about stone type and sealant first. LATICRETE sells a salt-rated penetrating sealer with up to 5 years of expected wear around salt pools, applied only to stone not yet exposed to salt.
| Source | What it says about stone and salt | What to do |
|---|---|---|
| Hayward AquaRite S3 manual (092769 Rev D) | Before installing with natural stone coping or adjacent decking, consult a qualified stone installation specialist on stone type, installation, sealant and maintenance | Ask the stone installer in writing before you add salt |
| Hayward limited warranty (same manual) | Excludes degradation of natural stone used in or immediately adjacent to a pool or spa | Stone damage is yours to carry, not the chlorinator maker's |
| Jandy AquaPure manual (H0325600 Rev F) | Porosity and hardness of natural stones vary greatly; seal masonry and reapply sealer on the maker's schedule | Pick a dense stone and keep a sealing calendar |
| LATICRETE STONETECH Salt Water Resistant Sealer (DS-288-1026) | Penetrating sealer for natural stone around salt water pools; minimizes efflorescence; up to 475 sq ft per gal; 72 h cure; expected wear up to 5 years; not for surfaces already exposed to salt water | Seal new stone before salt reaches it; plan to reseal within 5 years |
| TravertineMart knowledgebase | Recommends the STONETECH salt-water sealer and Premium Select grade pavers for a salt water pool in Iowa | Seller advice, not a test result |
| Limestone salt-crystallization study (PMC11356264) | Repeated salt crystallization cycles caused weight loss in limestone, with resistance tied to porosity | Lower porosity stone resists salt better; ask for absorption data |
Sources: Hayward AquaRite S3 manual, Jandy AquaPure manual, LATICRETE DS-288-1026, TravertineMart knowledgebase, PMC11356264. Download CSV
The mechanism is salt crystallization: salt water soaks into pores, dries and grows crystals that flake the surface. Lab cycles of salt crystallization caused weight loss in limestone, with resistance tied to porosity and strength (PMC11356264), as our saltwater pool vs chlorine study documents. White powder on the stone, efflorescence, is the visible sign; LATICRETE says its sealer is made to minimize it.
Timing matters. The LATICRETE data sheet says the sealer is not intended for surfaces already exposed to salt water, so seal new travertine before the chlorinator starts. Our guide on how to convert a pool to salt water puts the sealing step before the salt goes in, and salt targets by chlorinator are in our salt water pool maintenance guide.
Can a travertine pool deck handle freezing winters?
Sometimes, with the right installation. ASTM C1527 names no freeze-thaw test, so freeze performance rests on the seller’s own test. TravertineMart says its pavers passed third-party freeze-thaw testing and recommends sand set as the only method in freeze-thaw climates, with flexible mortar if you must bond to a slab.
Freeze exposure differs by city. By our count of NOAA 1991 to 2020 daily normals, Chicago has 120 days a year with a normal low at or below 32 F, Minneapolis 148 and Denver 161, while Phoenix has none. In those northern cities, water held in open holes and pores is the risk, which is why TravertineMart pairs sand setting with drainage (TravertineMart knowledgebase).
Ask for the freeze report, not a sentence. The Mandarin Stone sheet leaves flexural strength after freezing blank (NPD), and TravertineMart’s freeze claim names no test method or cycle count. Coping takes the worst of it: our pool coping guide compares the freeze tests that concrete and cast-stone coping must pass, and season length by city is in our pool season length study.
Get quotes for a travertine pool deck
How much does a travertine pool deck cost?
A travertine pool deck costs $20 to $34 per square foot installed for tumbled, unfilled pavers and $26 to $40 for premium stone in Phoenix (AE Outdoor Living, November 2026). Material is $4.25 to $5.09 per square foot. For 600 square feet plus 96 feet of coping, plan on $15,840 to $26,160 installed.
Planning ranges from one Phoenix-area installer, not a quote; other markets differ.
Source: AE Outdoor Living, Concrete vs Pavers vs Travertine Pool Deck, read November 8, 2026. Download chart data (CSV)
| Line | Quantity | Rate (source, date) | Cost |
|---|---|---|---|
| Pavers, Ivory Premium tumbled, 1.25 in | 600 sq ft | $4.85 per sq ft (Megastone, Nov 8, 2026) | $2,910 |
| Same pavers, Standard grade | 600 sq ft | $4.25 per sq ft (Megastone, Nov 8, 2026) | $2,550 |
| Coping, 12×24 Ivory, 2 in | 96 linear ft (16 x 32 ft pool) | $14.99 per linear ft (TravertineMart, Nov 2, 2026) | $1,439 |
| Crushed rock base, 4 in | 200 cu ft (7.4 cu yd) | Quantity from AquaBella minimum; local quarry price not sourced | Get a local quote |
| Bedding sand, 1 in | 50 cu ft (1.9 cu yd) | Quantity from AquaBella 1 in bed | Get a local quote |
| Salt water sealer, 1 coat | 2 gal (600 / 475 rounded up) | Coverage from LATICRETE DS-288-1026; no current US price found | Get a dealer quote |
| Materials subtotal, Premium pavers + coping | Sum of the two sourced lines | $4,349 | |
| Installed deck, AE standard travertine range | 600 sq ft | $20 to $34 per sq ft (AE Outdoor Living, Phoenix, read Nov 2026) | $12,000 to $20,400 |
| Installed deck, AE premium travertine range | 600 sq ft | $26 to $40 per sq ft (AE Outdoor Living) | $15,600 to $24,000 |
| Installed travertine coping | 96 linear ft | $40 to $60 per linear ft (River Pools, Aug 2025) | $3,840 to $5,760 |
| Planning total, standard deck + coping | Installed deck + installed coping | $15,840 to $26,160 |
Sources: Megastone USA, TravertineMart coping, AquaBella, LATICRETE, AE Outdoor Living, River Pools; arithmetic by PC&S. Download CSV
Material is the smaller share. Premium pavers for 600 square feet cost $2,910 at Megastone, 14% to 24% of AE’s $12,000 to $20,400 installed range; base, labor, cutting and haul-off make up the rest. Dropping to Standard grade saves $360, while the 2 inch coping adds $1,439 in material or $3,840 to $5,760 installed at River Pools‘ rates.
Some guides quote higher. A stone seller’s blog puts travertine at $25 to $42 or more per square foot installed with no source (Outercle), against AE’s published $20 to $34. Resurfacing an existing slab is a different job; overlay and coating prices for 600 square feet are in our pool deck resurfacing cost guide.
| What several guides say | What the primary source says | Source |
|---|---|---|
| Travertine is among the most slip-resistant pool tiles | The one travertine data sheet we found declares no slip value (NPD); the code asks for DCOF 0.42 only where a surface is tested wet | Mandarin Stone data sheet; ISPSC 306.2 |
| Travertine stays cool underfoot | Color drives surface heat: SRI 6 to 67 on one paver line; no travertine seller we read publishes solar reflectance | Techo-Bloc; EPA |
| Installed cost $25 to $42+ per sq ft (stone seller blog, no source) | One Phoenix installer publishes $20 to $34, or $26 to $40 for premium stone | Outercle; AE Outdoor Living |
| Travertine handles salt water pools | Hayward's warranty excludes natural stone damage and its manual tells owners to consult a stone specialist first | Hayward AquaRite S3 manual |
| Travertine meets ASTM C1527 | C1527/C1527M-23 lists absorption, density, compressive strength, modulus of rupture, abrasion and flexural strength; its scope names no freeze-thaw test | ASTM C1527 abstract |
Sources: Mandarin Stone, ISPSC 2024, Techo-Bloc, Outercle, AE Outdoor Living, Hayward, ASTM. Download CSV
Should you choose travertine for your pool deck?
Choose travertine if you want natural stone, will seal it and can pay roughly double broom concrete: AE lists $9 to $16 installed for concrete against $20 to $34 for travertine. Skip polished stone near water, use sand set where winters freeze, and seal before salt if you run a chlorinator.
| If your situation is | Do this | Why (source) |
|---|---|---|
| New deck on soil, any climate | Sand set 1.25 in pavers on at least 4 in of compacted crushed rock and 1 in of sand | AquaBella guide; TravertineMart |
| Freeze-thaw climate (Chicago: 120 freezing normal lows a year) | Sand set only, or flexible mortar if you must bond to a slab; get the seller's freeze test report in writing | TravertineMart knowledgebase; NOAA 1991 to 2020 normals |
| Sound concrete slab you want to keep | Mortar set pavers or tile with flexible mortar; slab must slope at least 1/8 in per ft | TravertineMart; ISPSC Table 306.5 |
| Salt chlorine generator, now or planned | Seal new stone before salt reaches it with a salt-rated penetrating sealer; reseal within 5 years | LATICRETE DS-288-1026; Hayward manual |
| Kids and heavy wet traffic | Choose tumbled or brushed, never polished; ask for a wet DCOF report of at least 0.42 | AE Outdoor Living; ISPSC 306.2 |
| Tight budget | Standard grade saves $0.60 per sq ft ($360 on 600 sq ft) at Megastone; concrete runs $9 to $16 installed in Phoenix | Megastone; AE Outdoor Living |
| Hot, sunny site | Pick the lightest color offered and test a sample in afternoon sun | EPA; Techo-Bloc SRI range |
Sources: AquaBella, TravertineMart, NOAA, ISPSC 2024, LATICRETE, AE Outdoor Living, Megastone. Download CSV

Planting near a stone deck sheds leaves and roots into the joints; low-litter plants and 4 to 10 ft tree setbacks are listed in our pool landscaping ideas guide.
How we compiled this
We read 17 documents in November 2026: four seller price listings (Megastone, TravertineMart, Tile & Mosaic Depot, TravertineMart coping), one installer price page (AE Outdoor Living), the AquaBella install guide, two TravertineMart knowledgebase answers, the LATICRETE sealer data sheet, Hayward and Jandy chlorinator manuals, a Mandarin Stone travertine data sheet, an NSI DCOF report, the ASTM C1527 abstract, and code and heat figures reused from our pool deck materials package. We did not test any stone; the 600 sq ft budget multiplies published rates.
Frequently Asked Questions
Is travertine good for a pool deck?
Yes, if it is tumbled, 1.25 inches thick, set on a drained base and sealed. Tumbled finishes are the usual pool choice (AE Outdoor Living), and ISPSC 306.2 asks for a wet DCOF of 0.42 where a deck is tested. Ask for the absorption and slip test reports, since the Mandarin Stone sheet we found declares no slip value.
How much does a travertine pool deck cost?
In Phoenix, $20 to $34 per square foot installed for tumbled, unfilled pavers and $26 to $40 for premium stone (AE Outdoor Living, November 2026). A 600 sq ft deck comes to $12,000 to $20,400, plus $3,840 to $5,760 for 96 feet of installed coping. Material alone runs $4.25 to $5.09 per square foot.
What are the disadvantages of travertine?
It is porous and acid-sensitive, so it needs sealing; LATICRETE rates its salt water sealer at up to 5 years of wear. Salt pools add risk: Hayward’s warranty excludes natural stone damage (AquaRite S3 manual). It also costs about double broom concrete, $20 to $34 against $9 to $16 per square foot in Phoenix.
Which is better for pool decks, porcelain or travertine?
Porcelain is denser and easier to keep clean; travertine is a natural stone that can be lifted and reset unit by unit. Either way, ask for a wet DCOF report: ANSI A326.3 sets no single pool deck value and treats 0.55 as the generally accepted figure for exterior wet floors (ANSI A326.3-2021). Compare quotes on the same base and setting method.
How thick should travertine pavers be for a pool deck?
1.25 inches (3 cm) for the deck and 2 inches (5 cm) for coping or wall caps, per TravertineMart and the AquaBella install guide. Sand set the pavers on at least 4 inches of compacted crushed rock and a 1 inch sand bed. Thinner 1/2 inch tile belongs only on a sound concrete slab with mortar.
Can you use travertine around a salt water pool?
Yes, with sealing first. LATICRETE’s STONETECH Salt Water Resistant Sealer covers up to 475 sq ft per gallon, cures in 72 hours and is not meant for stone already exposed to salt (DS-288-1026). Hayward tells owners to consult a stone specialist before running its chlorinator next to natural stone.
Sources
- AE Outdoor Living. Concrete vs Pavers vs Travertine Pool Deck. Accessed 2026-11-08.
- Megastone USA. Ivory Premium Tumbled Travertine Pavers and related listings. Accessed 2026-11-08.
- TravertineMart. Travertine pavers listing. Accessed 2026-11-08.
- TravertineMart. 12×24 Ivory 2 Inch Travertine Pool Coping (price read 2026-11-02 for /pool-coping/). Accessed 2026-11-08.
- Tile & Mosaic Depot. Travertine Outdoor Tile collection. Accessed 2026-11-08.
- AquaBella. Pavers Installation Guide on Pool (2024). Accessed 2026-11-08.
- TravertineMart knowledgebase. Travertine in Freeze/Thaw Climates. Accessed 2026-11-08.
- TravertineMart knowledgebase. Salt Water and Sealer. Accessed 2026-11-08.
- LATICRETE International. STONETECH Salt Water Resistant Sealer data sheet DS-288-1026. Accessed 2026-11-08.
- Hayward. AquaRite S3 installation and operation manual 092769 Rev D. Accessed 2026-11-08.
- Jandy (Zodiac). AquaPure and PureLink manual H0325600 Rev F. Accessed 2026-11-08.
- Mandarin Stone. Silver Tumbled Travertine technical data sheet. Accessed 2026-11-08.
- Natural Stone Institute for StoneHardscapes. ANSI A326.3 DCOF evaluation, Aspen White tumbled (April 2023). Accessed 2026-11-08.
- ASTM International. ASTM C1527/C1527M-23 Standard Specification for Travertine Dimension Stone (abstract). Accessed 2026-11-08.
- International Code Council via UpCodes. International Swimming Pool and Spa Code 2024, Section 306. Accessed 2026-11-08.
- Tile Council of North America. ANSI A326.3-2021. Accessed 2026-11-08.
- U.S. EPA. Reducing Urban Heat Islands: Cool Pavements. Accessed 2026-11-08.
- Techo-Bloc. Solar reflectance and SRI sheet (2025). Accessed 2026-11-08.
- NOAA NCEI. U.S. Climate Normals 1991 to 2020, daily. Accessed 2026-11-08.
- River Pools and Spas. Inground Pool Coping Idea and Cost Guide (updated August 18, 2025). Accessed 2026-11-08.
- PubMed Central. Salt crystallization in limestone (PMC11356264). Accessed 2026-11-08.
- Outercle. Is a Travertine Pool Deck Right for You?. Accessed 2026-11-08.
- Pool Construction & Service. Saltwater Pool vs Chlorine (PC&S research). Accessed 2026-11-08.
- Pool Construction & Service. Pool Season Length by City (PC&S research). Accessed 2026-11-08.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.