Skip to content
Backyard pool with a raised spa spilling into it at dusk, lit from underwater
Pool equipment guide: automation

Pool Automation System: Pentair, Hayward and Jandy Compared, With Prices and Install Cost

A pool automation system is a controller that runs your pump, lights, heater, valves and salt cell on schedules and from an app; dealer-listed kits ran $499.95 to $4,299.95 on November 2, 2026.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓8 systems, spec by specRelays, valve actuators, variable speed pumps, chemistry and app support from Pentair, Hayward and Jandy documents.
  • ✓Dated prices and an install buildDealer prices from November 2, 2026 plus labor and permit, worked out for four common pools.
  • ✓The energy math, honestlyDOE figures show the saving comes from the variable speed pump; we show what automation adds and what it does not.
Quick answer
Pool automation systems from Pentair (IntelliCenter), Hayward (OmniLogic, OmniPL, OmniHub) and Jandy (AquaLink RS, TCX) control 1 to 39 auxiliary circuits and up to 16 variable speed pumps. Kits listed at $499.95 to $4,299.95 on November 2, 2026; with labor and a permit, our four builds total $1,133 to $7,197.
$499.95 to $4,299.95
Kit price range, dealer list
39
Most auxiliary circuits, one IntelliCenter
Sept 29, 2023
EasyTouch discontinued
Source: Pentair

Key takeaways

  • Pentair discontinued IntelliTouch on July 31, 2023 and EasyTouch on September 29, 2023, and points owners to IntelliCenter or an IntelliCenter upgrade kit (Pentair IntelliCenter hub).
  • One Pentair IntelliCenter system reaches 39 auxiliary circuits with three expansion enclosures, 16 IntelliFlo pumps and 10 valves (IntelliCenter Installation Guide P/N 522989 Rev K).
  • Hayward lists its OmniHub, OmniPL and OmniLogic at 1 to 3, 4 to 8 and 4 to 20 relays, controlling 3, 8 and 16 variable speed pumps (Hayward Omni brochure LITOMNIFAM23).
  • Jandy AquaLink RS pool/spa boards run from 3 auxiliary circuits (RS-PS4) to 31 (RS-PS32), with 2 valve actuators included (Jandy Automation Selection Guide 9544_SL).
  • On November 2, 2026, ePoolSupply listed Pentair IntelliConnect at $499.95, the IntelliCenter Lite i5PS at $1,299.95 and the salt-ready IntelliCenter 524001 at $2,598.95; Hayward OmniLogic and OmniPL are not sold online.
  • DOE models a federal-standard variable speed pump at 1,390 kWh a year against 4,495 kWh for single-speed, $255 against $823 at the July 2026 US price of 18.31 cents per kWh (EIA); the controller itself adds no measured saving.

What is a pool automation system?

A pool automation system is a controller and load center that switches pool equipment on relays, turns valve actuators, talks to variable speed pumps, heaters and salt cells over a data link, and reads temperature sensors. Schedules run on the controller, and an app or remote changes them. Pentair’s IntelliCenter, for example, stores up to 100 schedules and 32 feature circuits.

How a pool automation system connects: high-voltage relays for switched loads, 24 V valve actuators, an RS-485 link to variable speed pumps, heaters and salt cells, and Wi-Fi to the app. Figures from Pentair 522989 Rev K, Hayward LITOMNIFAM23 and Jandy 6594; PC&S diagram.
How a pool automation system connects: high-voltage relays for switched loads, 24 V valve actuators, an RS-485 link to variable speed pumps, heaters and salt cells, and Wi-Fi to the app. Figures from Pentair 522989 Rev K, Hayward LITOMNIFAM23 and Jandy 6594; PC&S diagram.
Key numbers on pool automation systems, with source
NumberWhat it meansSource
July 31, 2023Pentair IntelliTouch discontinuedPentair IntelliCenter hub page
Sept 29, 2023Pentair EasyTouch discontinuedPentair IntelliCenter hub page
22 to 6Pentair IntelliCenter items after the 2026 lineup consolidation; each has 5 relays, expandable to 10Pentair IntelliCenter SKU update 2026
39Most auxiliary circuits on one IntelliCenter system, using up to three expansion enclosuresPentair install guide P/N 522989 Rev K
16Variable speed pumps controlled by IntelliCenter, Hayward OmniLogic and Jandy AquaLink RS (firmware Rev W, mid-2022 on)Pentair 522989; Hayward LITOMNIFAM23; Jandy 6594
4 to 20Relays on Hayward OmniLogic (OmniPL 4 to 8, OmniHub 1 to 3)Hayward LITOMNIFAM23
3 to 31Auxiliary circuits on Jandy AquaLink RS pool/spa boards, RS-PS4 to RS-PS32Jandy 9544_SL
$499.95 to $4,299.95Dealer list prices of the automation kits in this guide, November 2, 2026ePoolSupply listings
1,390 vs 4,495 kWhYearly electricity, DOE model variable speed pump at the federal level vs single-speed baselineDOE pool pump technical support document

Sources: Pentair IntelliCenter hub; Pentair IntelliCenter SKU update 2026; Pentair install guide 522989 Rev K; Hayward LITOMNIFAM23; Jandy 9544_SL; Jandy 6594; ePoolSupply product listings, captured November 2, 2026; DOE technical support document. Download CSV

Three kinds of connection do the work. A relay is a high-voltage switch: the standard IntelliCenter load center ships with five, one for the filter pump and four auxiliary, and a Jandy power center holds 4 of its 3 HP relays as shipped and up to 8 (Jandy 9544_SL). A valve actuator is a 24 V motor that turns a 3-way valve, which is how a pool/spa system moves water between the two bodies.

The third is the data link. Variable speed pumps, heaters and salt chlorine generators talk to the controller over RS-485, so they need no relay: IntelliCenter supports 16 IntelliFlo pumps and RS-485 heaters, but only one salt chlorine generator per system (Pentair install guide). Chemistry controllers join the same link; Pentair’s user guide allows up to 4 IntelliChem controllers (IntelliCenter User Guide P/N 522990 Rev F).

Which pool automation systems are on the market in 2026, and how do they compare?

Eight lines cover most US equipment pads: Pentair IntelliCenter and IntelliConnect, Hayward OmniLogic, OmniPL and OmniHub, and Jandy AquaLink RS and TCX, plus the discontinued EasyTouch and IntelliTouch. The table lines them up by relays, valve actuators, variable speed pumps, chemistry, app support and a dated dealer price, each from the maker’s own document.

Pool automation systems compared: relays, valves, variable speed pumps, chemistry, app and dealer price, November 2026
System (maker)Status, Nov 2026Relays or aux circuitsValve actuatorsVariable speed pumpsChemistry optionApp and voiceDealer price, Nov 2, 2026Source
IntelliCenter (Pentair)Current; lineup cut from 22 items to 6 in 2026Filter pump + 4, 7 or 9 aux (i5, i8, i10); 39 aux with 3 expansion enclosuresIntake, return, A and B; up to 10 with valve expansion16 IntelliFloIntelliChem (up to 4 per system), one IntelliChlor salt cellPentair Pool app; Wi-Fi or high-power wireless$1,199.95 (Lite i5P) to $2,598.95 (524001 pool/spa, salt ready)Pentair install guide 522989 Rev K; SKU update 2026
IntelliConnect (Pentair)Current2 on/off relays plus communicating Pentair devices; Pentair says it controls 5 pool productsNone listedPentair communicating pumpsIntelliChlor via data linkPentair Pool app; 2.4 GHz Wi-Fi$499.95Pentair automation guide; ePoolSupply 523317
EasyTouch and IntelliTouch (Pentair)Discontinued Sept 29, 2023 and July 31, 2023Not compared: no longer maden/an/an/aScreenLogic (legacy)Remaining stock: EasyTouch PSL4 ScreenLogic bundle $1,394.95Pentair IntelliCenter hub page
OmniLogic (Hayward)Current; premium new builds4 to 20 relays; up to 16 relays added by modules4, expandable to 16 (brochure); up to 12 valves added16Sense and Dispense (HL-CHEM); salt readyOmniLogic app; Alexa and Google HomeNot sold online (Expert Line, dealer quote)Hayward LITOMNIFAM23 (2023)
OmniPL (Hayward)Current; new and existing mid-range pools4 to 8 relays; 8-breaker sub-panel4 (2 for pool/spa intake and return)8Salt on S and PLUS models (PLUS cell for pools up to 40,000 gal)App, Alexa and Google Home on W models onlyNot sold online (Expert Line)Hayward LITOMNIFAM23; OmniPL page
OmniHub (Hayward)Current; entry-level and retrofit1 to 3 relays; external sub-panel23AquaRite with daughter boardOmniLogic app; Alexa and Google HomeController HLHCONTROL $674.95Hayward LITOMNIFAM23; ePoolSupply
AquaLink RS (Jandy)Current; firmware Rev W from mid-2022Pump, heater and 3 to 31 aux (RS-PS4 to RS-PS32); dual-equipment RS2-6 to RS2-302 included on PS models; 4 to 16 maximum16 (Rev W and later); 4 on Rev V and earlierTruSense pH and ORP analyzer on RS-485iAquaLink app via iQ30-A web-connect device$1,099.95 (iQ904-P kit) to $4,299.95 (iQ906-PS-PC-SWC with salt)Jandy 9544_SL; 54107_SL; 6594
AquaLink TCX (Jandy)Current; pool only, no spaVS pump, heater and 1 aux0 included, 1 maximum1Not listediAquaLink app$626.95 (TCXP)Jandy 9544_SL; ePoolSupply

Sources: Pentair IntelliCenter Installation Guide 522989 Rev K (6/27/25); Pentair SKU update 2026; Pentair pool automation guide; Hayward Omni brochure LITOMNIFAM23 (2023); Hayward OmniPL page; Jandy 9544_SL (2022); Jandy 54107_SL; Jandy 6594 (2025); prices from ePoolSupply product listings, captured November 2, 2026. Download CSV

Hayward's own capability table: OmniHub 1 to 3 relays and 3 variable speed pumps, OmniPL 4 to 8 and 8, OmniLogic 4 to 20 and 16. From Hayward brochure LITOMNIFAM23 (2023), page 3, accessed November 2, 2026; red box added by PC&S.
Hayward’s own capability table: OmniHub 1 to 3 relays and 3 variable speed pumps, OmniPL 4 to 8 and 8, OmniLogic 4 to 20 and 16. From Hayward brochure LITOMNIFAM23 (2023), page 3, accessed November 2, 2026; red box added by PC&S.

What is the best pool automation system? The one sized to your pad and matched to your pump brand, because all three makers’ top systems control 16 variable speed pumps. Capacity splits them: IntelliCenter reaches 39 auxiliary circuits, the Jandy RS-PS32 31, and Hayward lists OmniLogic at up to 20 relays. Each maker’s pumps, heaters and salt cells connect over its own data link.

Buying channels differ. Hayward sells OmniLogic and OmniPL as Expert Line products only through local pool professionals, with a 3-year parts and 1-year labor warranty listed on the OmniPL page (Hayward). Pentair and Jandy kits are listed online, so the IntelliCenter 524001 carried a $2,598.95 price against a $3,542.99 compare-at price on November 2, 2026.

Pentair pool automation system: which IntelliCenter? Pentair’s 2026 sheet cut the IntelliCenter lineup from 22 items to 6, all with 5 relays expandable to 10 per load center (Pentair SKU update 2026). The Lite models, 523910 and 523911, ship with Wi-Fi; the others carry a salt chlorine generator transformer and high-powered wireless. Choose the PS model when a spa shares the pump.

Hayward OmniLogic pool automation system: what does it add? Hayward lists OmniLogic for premium new builds with 12 to 24 sub-panel breakers, valves expandable to 16, Sense and Dispense chemistry and integrations with Control4, Crestron, Elan, RTI and Nest (Hayward LITOMNIFAM23). Its AquaRite salt control works at salt levels as low as 800 ppm, by Hayward’s figure.

Are Pentair EasyTouch and IntelliTouch discontinued?

Yes. Pentair discontinued IntelliTouch on July 31, 2023 and EasyTouch on September 29, 2023. Systems bought in 2023 carry a 1-year warranty standalone or 3 years in a bundle, and under warranty Pentair replaces failed legacy parts while they last, then supplies an IntelliCenter upgrade kit. Kits for existing enclosures listed at $999.95 to $1,299.95 in November 2026.

Upgrade and retrofit paths for existing pool equipment, with November 2026 prices
You have nowUpgrade pathHardware price, Nov 2, 2026Source
Pentair EasyTouch or IntelliTouch, pool only, enclosure from 2012 onIntelliCenter upgrade kit 522047 (i10P board in the existing enclosure)$999.95Pentair install guide upgrade kit list; ePoolSupply
Pentair EasyTouch or IntelliTouch, pool/spa, before 2012IntelliCenter upgrade kit 522046$1,099.95ePoolSupply
Pentair EasyTouch or IntelliTouch, pool/spa, 2012 onIntelliCenter i10PS upgrade kit 522048$1,299.95ePoolSupply
Pentair EasyTouch, IntelliTouch or IntelliCenter, switching brandsJandy IQ-PENT-RSPS8 conversion to AquaLink RS PS8 with iAquaLink$1,537.95ePoolSupply
Hayward ProLogicProLogic to OmniPL upgrade kit HLPROUPGDealer quote (Expert Line)Hayward LITOMNIFAM23
Older Jandy AquaLink RS without app controliQ30-A web-connect device$500.95Jandy 9544_SL; ePoolSupply
Another brand of variable speed pump on a Hayward systemHLPMPCONV variable speed pump converter board$166.95Hayward LITOMNIFAM23; ePoolSupply
Single-speed pump on a mechanical timer, no automationReplace the pump with variable speed first; its built-in schedule may be all the control you needPump $1,739 median (PC&S price panel, 2026)PC&S pool pump replacement cost guide

Sources: Pentair IntelliCenter hub; Pentair install guide (upgrade kits 522045 to 522048); Hayward LITOMNIFAM23; Jandy 9544_SL; prices from ePoolSupply product listings, captured November 2, 2026. Download CSV

A working EasyTouch or IntelliTouch does not need replacing on a date. For warranty repairs, Pentair’s FAQ says it will replace legacy systems with comparable equipment while parts are available and provide the IntelliCenter upgrade kit if they are not (Pentair). Remaining stock still turns up: an EasyTouch PSL4 bundle with ScreenLogic was listed at $1,394.95 on November 2, 2026, more than the $1,099.95 to $1,299.95 pool/spa upgrade kits.

Freeze protection carries over to the newer systems. Pentair’s EasyTouch user guide turns the filter pump on when its air sensor reads below 36F for circuits with freeze protection enabled, and IntelliCenter’s user guide lists its own freeze protection with a manual override for the pool pump. Check those settings after any upgrade, before the first frost, and see our pool winterizing guide for the rest of the closing steps.

How much does a pool automation system cost?

Hardware listed at $499.95 for Pentair IntelliConnect to $4,299.95 for a Jandy AquaLink RS PS6 kit with a salt chlorinator at ePoolSupply on November 2, 2026. Published installed ranges run $1,500 to $3,500 (River Pools, 2024) up to $1,500 to $8,000 (Latestcost, 2026). Chemistry controllers, extra valve actuators and a sub-panel are the add-ons that move the bill most.

Pool automation kit prices, ePoolSupply, November 2, 2026Hardware only, before labor, permit and any salt cell or chemistry controller
Pool automation kit prices, ePoolSupply, November 2, 2026Bar chart: pool automation kits listed from $499.95 for Pentair IntelliConnect to $4,299.95 for a Jandy AquaLink RS PS6 kit with salt chlorinator; Pentair IntelliCenter pool/spa salt-ready load center at $2,598.95.Pentair IntelliConnect 523317: $500Pentair IntelliConnect 523317$500Jandy AquaLink TCX (TCXP): $627Jandy AquaLink TCX (TCXP)$627Hayward OmniHub controller: $675Hayward OmniHub controller$675Jandy RS P4 kit iQ904-P: $1,100Jandy RS P4 kit iQ904-P$1,100IntelliCenter Lite pool only 523911: $1,200IntelliCenter Lite pool only 523911$1,200IntelliCenter Lite i5PS 523910: $1,300IntelliCenter Lite i5PS 523910$1,300IntelliCenter 524001 (pool/spa, salt ready): $2,599IntelliCenter 524001 (pool/spa, salt ready)$2,599Jandy RS PS6 kit iQ906-PS-PC: $3,001Jandy RS PS6 kit iQ906-PS-PC$3,001Jandy RS PS6 kit with salt iQ906-PS-PC-SWC: $4,300Jandy RS PS6 kit with salt iQ906-PS-PC-SWC$4,300

Dealer list prices change; Hayward Expert Line controllers are priced by dealers.

Source: ePoolSupply product listings captured November 2, 2026. Hayward OmniLogic and OmniPL base units are not sold online.. Download chart data (CSV)

Pool automation hardware prices by part number, ePoolSupply, November 2, 2026
ItemMaker part numberWhat you getListed priceRetailer and date
Pentair IntelliConnect5233172 relays, app control of Pentair pump and chlorinator$499.95ePoolSupply, Nov 2, 2026
Jandy iQ30-A web-connect deviceIQ30-AAdds iAquaLink app control to an AquaLink RS system$500.95ePoolSupply, Nov 2, 2026
Jandy AquaLink TCX pool-only bundleTCXPCommand hub and power center, 1 relay$626.95ePoolSupply, Nov 2, 2026
Hayward OmniHub controllerHLHCONTROLController for the OmniHub retrofit system$674.95ePoolSupply, Nov 2, 2026
Pentair IntelliCenter Lite, pool only5239115 relays, i5P, Wi-Fi$1,199.95ePoolSupply, Nov 2, 2026
Pentair IntelliCenter Lite, pool/spa5239105 relays, i5PS, Compool valve actuators, Wi-Fi$1,299.95ePoolSupply, Nov 2, 2026
Jandy AquaLink RS P4 pool-only kitiQ904-PRS4 board, sensors, relays, iQ30-A$1,099.95ePoolSupply, Nov 2, 2026
Jandy AquaLink RS PS4 boardRS-PS4Pool/spa board, up to 4 functions, JVA support$1,123.95ePoolSupply, Nov 2, 2026
Pentair IntelliCenter pool/spa load center, salt ready5240015 relays (to 10), 2 IntelliValve actuators, salt transformer; cell extra$2,598.95ePoolSupply, Nov 2, 2026
Jandy AquaLink RS PS6 pool/spa kit with sub-paneliQ906-PS-PCRS6 board, 6614 sub-panel power center, 2 actuators, iQ30-A$3,000.95ePoolSupply, Nov 2, 2026
Jandy AquaLink RS PS6 kit with PureLink salt chlorinatoriQ906-PS-PC-SWCAs above plus AquaPure PLC1400 salt cell$4,299.95ePoolSupply, Nov 2, 2026
Pentair IntelliChem controller521357pH and ORP control$1,599.95ePoolSupply, Nov 2, 2026
Jandy TruSense analyzer, pH and ORPTRUSENSEChemistry sensing for AquaLink RS$704.95ePoolSupply, Nov 2, 2026
Pentair IntelliCenter valve expansion module522038ZAdds 6 actuator ports$184.95ePoolSupply, Nov 2, 2026
24 V valve actuatorsGVA-24; JVA 4424; CVA24T; IntelliValve 521485One actuator each (Hayward, Jandy, Pentair, Pentair)$185.95 to $229.95ePoolSupply, Nov 2, 2026
Hayward OmniLogic and OmniPL base unitsHLBASE; HLPRO4WExpert Line: sold only through pool professionalsNot listed onlineHayward OmniPL page, Nov 2, 2026

Source: ePoolSupply product listings, captured November 2, 2026; Hayward availability from the Hayward OmniPL page. Prices exclude shipping and tax. Download CSV

Published installed cost ranges for pool automation, by publisher and date
PublisherDateWhat the range coversLow ($)High ($)
River PoolsUpdated Oct 28, 2024Pool automation system1,5003,500
Simplified Pools (Texas builder)2026 guideModern system, installed1,5005,000
HomeyouUpdated Apr 17, 2026Pool automation system installation1,5555,960
Latestcost2026Installed system; labor alone $500 to $2,500 for about 6 to 16 hours1,5008,000
Shasta Pools (Arizona builder)2026Comprehensive automation with installation2,5005,000

Sources: River Pools; Simplified Pools; Homeyou; Latestcost; Shasta Pools. Accessed November 2, 2026. Download CSV

The published ranges disagree because they price different jobs. River Pools’ $1,500 to $3,500 sits below the $4,613.80 that a salt-ready IntelliCenter, an IntelliChem controller, a valve expansion module and one extra actuator cost before labor. None of the five publishers lists the hardware behind its range, which is why the build in the next section starts from part numbers.

Add-ons are priced one by one. A Pentair IntelliChem controller listed at $1,599.95, a Jandy TruSense pH and ORP analyzer at $704.95, a Pentair valve expansion module at $184.95 and single 24 V valve actuators at $185.95 to $229.95 on November 2, 2026. Hayward relays add $88.95 each for the HLRELAY module and $360.95 for the HLIOEXPAND valve, sensor and input board.

Pool automation system installed cost, line by line

Four builds price the jobs most owners face: $1,133 to $1,711 for a pool-only Jandy TCX, $1,606 to $2,184 to upgrade an EasyTouch, $2,106 to $2,984 for an IntelliCenter Lite on a pool and spa, and $5,870 to $7,197 for a salt-ready IntelliCenter with IntelliChem. Each adds 6 to 16 labor hours at $75 to $150 and a permit.

Worked example: installed cost of four pool automation builds, 2026
BuildHardware (dealer list, Nov 2, 2026)Hardware $Labor hours (PC&S assumption)Labor at $75 to $150 per hourPermit $56.48 to $183.69Total, low to high
A. Pool only, app control of pump, heater, 1 lightJandy AquaLink TCX (TCXP)$626.956$450 to $900$56.48 to $183.69$1,133.43 to $1,710.64
B. Existing EasyTouch or IntelliTouch, pool/spa, kept enclosurePentair IntelliCenter upgrade kit (522046)$1,099.956$450 to $900$56.48 to $183.69$1,606.43 to $2,183.64
C. Pool and spa sharing equipment, 5 relaysPentair IntelliCenter Lite i5PS (523910)$1,299.9510$750 to $1,500$56.48 to $183.69$2,106.43 to $2,983.64
D. Pool/spa, salt ready, chemistry, 3rd valveIntelliCenter 524001 + IntelliChem 521357 + valve expansion 522038Z + IntelliValve 521485$4,613.8016$1,200 to $2,400$56.48 to $183.69$5,870.28 to $7,197.49

Sources: hardware from ePoolSupply product listings, captured November 2, 2026; labor rate $75 to $150 per hour from Angi pool pump repair cost (Nov 25, 2025); 6 to 16 hours from Latestcost; permits from the Fort Worth and Austin fee schedules. PC&S arithmetic: hardware + hours x rate + permit. Download CSV

Installed cost of four pool automation builds, 2026Dealer hardware price plus 6 to 16 labor hours at $75 to $150 and a $56.48 to $183.69 permit
Installed cost of four pool automation builds, 2026Range chart: build A (Jandy TCX pool only) about $1,133 to $1,711; build B (IntelliCenter upgrade kit) about $1,606 to $2,184; build C (IntelliCenter Lite i5PS) about $2,106 to $2,984; build D (IntelliCenter with IntelliChem) about $5,870 to $7,197.$0$2,000$4,000$6,000$8,000A. Pool only: $1,133 to $1,711A. Pool onlyB. Existing EasyTouch or IntelliTouch: $1,606 to $2,184B. Existing EasyTouch or IntelliTouchC. Pool and spa sharing equipment: $2,106 to $2,984C. Pool and spa sharing equipmentD. Pool/spa: $5,870 to $7,197D. Pool/spa

Labor hours are PC&S assumptions inside Latestcost's 6 to 16 hour range.

Source: ePoolSupply (Nov 2, 2026); Angi labor rate; Fort Worth and Austin fee schedules; PC&S arithmetic.. Download chart data (CSV)

Labor hours are our assumption inside Latestcost’s 6 to 16 hour range: 6 hours to hang a small power center or swap a board in an existing enclosure, 10 for a pool/spa system with two actuators, 16 when a chemistry controller and a third valve are plumbed in. We used Angi’s $75 to $150 hourly pool technician rate; HomeGuide puts electricians at $40 to $100 an hour, which would lower each total.

Permits vary by city. Electrical permit fees for pool work run $56.48 in Fort Worth to $183.69 in Austin on current schedules, compiled in our pool equipment price index and permit research. A new sub-panel or circuit is the item most likely to need one; ask the installer to name the permit on the quote.

Does a pool automation system save energy and money?

Only through what it schedules. DOE’s model puts a federal-standard variable speed pump at 1,390 kWh a year against 4,495 kWh for single-speed, a 69% cut worth $568 a year over DOE’s national-average season at the July 2026 US price of 18.31 cents. A variable speed pump’s own schedule captures that saving; automation adds coordination of heater, lights and peak hours.

Energy case: what the variable speed pump saves, and what automation adds
LineItemValueSource
1DOE model single-speed pump (0.95 hhp baseline), yearly electricity4,495 kWhDOE technical support document, Table 7.4.1
2Same job, variable speed pump at the federal standard level (EL6)1,390 kWhDOE technical support document
3Reduction (1 minus line 2 / line 1)69%PC&S arithmetic
4US average residential price, July 202618.31 cents per kWhEIA Table 5.6.A
5Yearly cost over the DOE national-average season: single-speed vs variable speed$823 vs $255PC&S arithmetic: kWh x $0.1831
6Yearly cost if the pump runs every day: single-speed vs variable speed$1,451 vs $449 (saving $1,003)PC&S cost to run a pool pump report
7Median state saving over DOE swim seasons (North Carolina)$487 a yearPC&S cost to run a pool pump report
8What an automation system adds on top of lines 5 to 7No DOE or maker figure found; savings come from scheduling the pump, heater and lights, not from the controllerPC&S review of Pentair, Hayward and Jandy documents

Sources: DOE dedicated-purpose pool pump technical support document; EIA Electric Power Monthly Table 5.6.A (July 2026); PC&S cost to run a pool pump report; PC&S arithmetic. Download CSV

Federal rules already require the efficient pump. Since July 19, 2021, new self-priming pool filter pumps of 0.711 to under 2.5 hydraulic horsepower must meet a weighted energy factor set at the variable speed level (10 CFR 431.465(f)). Pentair’s IntelliFlo3 ships with a Program 1 of 24 hours at 30 GPM (IntelliFlo3 guide P/N 356231), so a pool-only owner gets the low-speed schedule without a controller. Speeds and run hours are worked out in our variable speed pool pump guide.

Where automation earns its keep is timing across devices. APS tells customers on its 4pm to 7pm plan to set the pool timer to run before 4 p.m. on weekdays (APS), and PG&E’s E-TOU-C peak runs 4 to 9 p.m. every day (PG&E). A controller can keep the pump, booster pump, heater and lights all out of that window. California’s Energy Code requires a time switch able to hold recirculation pumps to off-peak periods on new pools (Energy Code Ace).

Lights and heat are the other levers. Our pool lighting guide prices a 500 W incandescent light at $132.57 a year at 4 hours a night against $6.89 for a 26 W LED, and a schedule that trims hours cuts both. Hours by pool size are in our guide to how long to run a pool pump.

Off-peak filtration: APS asks customers on its 4pm to 7pm plan to run pool timers before 4 p.m. on weekdays.
Off-peak filtration: APS asks customers on its 4pm to 7pm plan to run pool timers before 4 p.m. on weekdays.

Can you add a pool automation system to an existing pool?

Yes, and makers sell retrofit kits for it. Jandy’s AquaLink TCX targets existing pool-only pads, Hayward markets OmniHub and OmniPL for new and existing pools, and Pentair sells IntelliCenter upgrade kits that fit EasyTouch and IntelliTouch enclosures. Compatibility with your pump’s data link decides the cost: Hayward’s HLPMPCONV board, $166.95, adds other brands’ variable speed pumps.

  1. List every load on the padCount pumps (filter, booster, water feature), lights, heater, salt cell and blower, with brand and model. Each single-speed load needs a relay; communicating pumps, heaters and salt cells use the RS-485 link.
  2. Count relays and valves you need now plus 2IntelliCenter load centers ship with 5 relays and expand to 10; OmniPL starts at 4 and reaches 8; Jandy RS6 has 6 relays. A pool/spa pair needs at least 2 valve actuators for intake and return.
  3. Check the data linkSame-brand pumps and heaters connect directly. Jandy AquaLink RS boards on firmware Rev W, made after mid-2022, address 16 variable speed pumps; Rev V and earlier address 4 (Jandy 6594).
  4. Plan the electrical workThe IntelliCenter load center is rated for a 150 A maximum 240 VAC supply breaker (Pentair 522989 Rev K). A licensed electrician runs the feeder, bonds the panel and checks GFCI protection for pump and light circuits under NEC 680.
  5. Confirm Wi-Fi at the equipment padPentair IntelliConnect needs 2.4 GHz Wi-Fi; IntelliCenter offers a high-powered wireless link; Jandy needs the iQ30-A web-connect device ($500.95) for iAquaLink app control.
  6. Program and test before sign-offHave the installer run each relay, rotate each valve actuator, confirm freeze protection settings and pump schedules, then walk you through the app before the final invoice.
Most retrofit jobs happen on pools that already have a pump, filter and lights; the controller ties them to one schedule.
Most retrofit jobs happen on pools that already have a pump, filter and lights; the controller ties them to one schedule.

Wiring is where retrofits go wrong. Pool equipment sits within reach of water, and the bonding and GFCI rules for pumps and lights in NEC 680 apply to the new panel. Our pool bonding guide lists what an inspector checks, and the decision table below lists when a retrofit is not worth paying for.

Which pool automation system fits your pool, and who should skip one?

Match the system to your loads: a pool with one variable speed pump and no heater or spa needs no controller, a pool-only pad wanting app control fits a $499.95 to $674.95 entry system, a shared pool and spa needs a pool/spa model with two valve actuators, and water features or a second body push toward IntelliCenter, OmniLogic or a larger AquaLink RS board.

Decision table: which pool automation system to buy, or whether to skip it
If your situation isDo thisNumber behind it
Pool only, one variable speed pump, no heater, 1 or 2 lightsSkip automation; program the pump's own schedule and put lights on a time switchIntelliFlo3 ships with a 24 h, 30 GPM default program; Intermatic T104M time switch $79.95
Pool only, want app control of pump, heater and a lightEntry system: Jandy AquaLink TCX, Pentair IntelliConnect or Hayward OmniHubTCXP $626.95 (1 aux); IntelliConnect $499.95 (2 relays); OmniHub 1 to 3 relays
Pool and spa share one pump and filterBuy a pool/spa (PS) model with intake and return valve actuatorsIntelliCenter Lite i5PS $1,299.95; Jandy RS-PS4 board $1,123.95, 2 actuators on PS kits
Working EasyTouch or IntelliTouch panelKeep it while parts last; budget an upgrade kit when the board failsPentair replaces legacy boards while parts last, then supplies an upgrade kit; kits $999.95 to $1,299.95
Water features, landscape lights or a second body of waterSize by relays and valves, not by brandIntelliCenter up to 39 aux and 10 valves; OmniLogic up to 20 relays; AquaLink RS-PS32 31 aux
Want chemistry monitoringAdd the maker's chemistry controller and budget for it separatelyIntelliChem $1,599.95; TruSense $704.95; Sense and Dispense dealer quote
Quote above $8,000 for a pool/spa system without chemistryAsk for an itemized quote: hardware, labor hours, permitHighest published installed range found: $1,500 to $8,000 (Latestcost, 2026)
Breaker or GFCI trips after new automation is wiredTurn the power off and call the licensed electrician back before anyone swimsNEC 680 GFCI rules; CPSC counts 33 pool and spa electrocution deaths, 2002 to 2018

Sources: Pentair IntelliFlo3 guide; Pentair install guide; Pentair hub; Hayward LITOMNIFAM23; Jandy 9544_SL; Latestcost; CPSC; prices from ePoolSupply product listings, captured November 2, 2026. Download CSV

Decision flowchart: skip automation on a simple pool-only pad, price an upgrade kit for an existing panel, buy a pool/spa model when a spa shares the pump. Prices from ePoolSupply, November 2, 2026; PC&S flowchart.
Decision flowchart: skip automation on a simple pool-only pad, price an upgrade kit for an existing panel, buy a pool/spa model when a spa shares the pump. Prices from ePoolSupply, November 2, 2026; PC&S flowchart.

Skip automation when the pad is simple. A pool with one variable speed pump, no heater and one light gains little from a controller, since the pump stores its own schedule and an Intermatic T104M time switch listed at $79.95 handles a light. Spend the money on the pump first; our pool pump replacement cost guide prices it, and our salt water pool maintenance guide covers cell care either way. When a scheduled light stays dark, check that the relay is calling for it before anything else, as our pool light not working guide explains.

How we compiled this

On November 2, 2026 we read Pentair’s IntelliCenter installation guide, user’s guide, 2026 SKU sheet, automation guide and IntelliCenter hub page, Hayward’s Omni brochure and OmniPL page, and Jandy’s automation selection guide, kit sheet and AquaLink RS hardware manual: 12 maker documents. Prices are ePoolSupply listings captured that day; installed ranges come from five published cost guides. We did not install or test any system; labor hours in the builds are our labeled assumptions, and forum posts were excluded.

Frequently Asked Questions

What is a pool automation system?

A controller and load center that runs pool equipment on schedules and from an app: relays switch pumps and lights, 24 V actuators turn valves, and a data link talks to variable speed pumps, heaters and salt cells. Pentair’s IntelliCenter stores up to 100 schedules and reaches 39 auxiliary circuits with expansion enclosures (Pentair install guide 522989 Rev K).

What is the best pool automation system?

The best fit is the one sized to your equipment and matched to your pump brand. Pentair IntelliCenter, Hayward OmniLogic and Jandy AquaLink RS (firmware Rev W) each control 16 variable speed pumps; IntelliCenter reaches 39 auxiliary circuits, the Jandy RS-PS32 31 and OmniLogic 20 relays. Hayward sells OmniLogic only through pool professionals.

How much does a pool automation system cost?

Hardware listed at $499.95 (Pentair IntelliConnect) to $4,299.95 (Jandy AquaLink RS PS6 kit with salt) at ePoolSupply on November 2, 2026. With 6 to 16 labor hours at $75 to $150 and a $56.48 to $183.69 permit, our four builds total $1,133 to $7,197. Published installed ranges run $1,500 to $8,000.

Is Pentair EasyTouch discontinued?

Yes. Pentair discontinued EasyTouch on September 29, 2023 and IntelliTouch on July 31, 2023, and recommends IntelliCenter. Under warranty, Pentair replaces failed parts while they last, then supplies an IntelliCenter upgrade kit. Kits that fit existing EasyTouch and IntelliTouch enclosures listed at $999.95 to $1,299.95 in November 2026.

How does a pool and spa automation system work?

On a shared pool and spa, two 24 V valve actuators rotate the intake and return valves so one pump and heater serve either body. Pentair’s PS personality boards wire the intake and return actuators to dedicated terminals, and Jandy’s pool/spa kits include 2 actuators. In spa mode, Pentair’s user guide sets IntelliChlor output to 1/20 of the pool setting.

Can I add automation to an existing pool?

Yes. Jandy’s AquaLink TCX ($626.95, pool only), Pentair IntelliConnect ($499.95) and Hayward’s OmniHub are built for existing pads, and IntelliCenter upgrade kits fit EasyTouch and IntelliTouch enclosures. Check that your pump and heater can talk to the new controller; Hayward’s HLPMPCONV board ($166.95) adds other brands’ variable speed pumps.

Does pool automation save money?

The variable speed pump saves the money; automation schedules it. DOE models 1,390 kWh a year for a federal-standard variable speed pump against 4,495 kWh for single-speed, $255 against $823 at 18.31 cents per kWh (EIA, July 2026). A controller adds savings only by keeping pumps, heater and lights out of peak hours.

Sources

  1. Pentair. IntelliCenter Control System Installation Guide, P/N 522989 Rev K (6/27/25). Accessed 2026-11-02.
  2. Pentair. IntelliCenter Control System User's Guide, P/N 522990 Rev F (4/16/25). Accessed 2026-11-02.
  3. Pentair. Simplified IntelliCenter Lineup (SKU update 2026). Accessed 2026-11-02.
  4. Pentair. IntelliCenter Pool Automation System Hub (discontinuation dates, FAQ). Accessed 2026-11-02.
  5. Pentair. Know Your Pool Equipment: Pool Automation. Accessed 2026-11-02.
  6. Pentair. EasyTouch Control System PL4/PSL4 User's Guide. Accessed 2026-11-02.
  7. Pentair. IntelliFlo3 VSF Installation and Maintenance Guide, P/N 356231 Rev E. Accessed 2026-11-02.
  8. Hayward. Omni Smart Pool & Spa Control brochure, LITOMNIFAM23 (2023). Accessed 2026-11-02.
  9. Hayward. OmniPL 4 Relays (HLPRO4) product page. Accessed 2026-11-02.
  10. Zodiac Pool Systems (Jandy, Fluidra). Automation Selection Guide, 9544_SL (2022). Accessed 2026-11-02.
  11. Zodiac Pool Systems (Jandy, Fluidra). AquaLink All-In-One Kits, 54107_SL (2022). Accessed 2026-11-02.
  12. Fluidra (Jandy). AquaLink RS Control Systems Hardware Installation Manual, 6594 (2025). Accessed 2026-11-02.
  13. ePoolSupply. Product listings: IntelliCenter, IntelliConnect, AquaLink RS, TCX, OmniHub, IntelliChem, TruSense, actuators. Accessed 2026-11-02.
  14. U.S. Department of Energy. Dedicated-purpose pool pump technical support document. Accessed 2026-11-02.
  15. U.S. Energy Information Administration. Electric Power Monthly Table 5.6.A (July 2026). Accessed 2026-11-02.
  16. eCFR. 10 CFR 431.465, dedicated-purpose pool pump standards. Accessed 2026-11-02.
  17. California Energy Code Ace. Pool and Spa Fact Sheet (2025 Energy Code). Accessed 2026-11-02.
  18. Arizona Public Service. Time-of-Use 4pm-7pm Weekdays. Accessed 2026-11-02.
  19. Pacific Gas and Electric. Time-of-Use Rate Plans. Accessed 2026-11-02.
  20. Angi. How Much Does It Cost to Repair a Pool Pump? (Nov 25, 2025, Wayback copy). Accessed 2026-11-02.
  21. HomeGuide. Pool pump cost (labor rates). Accessed 2026-11-02.
  22. City of Austin. Residential fee schedule. Accessed 2026-11-02.
  23. City of Fort Worth. Development fees schedule. Accessed 2026-11-02.
  24. River Pools. Automation systems for pools. Accessed 2026-11-02.
  25. Simplified Pools. Pool automation systems guide. Accessed 2026-11-02.
  26. Homeyou. Swimming pools cost. Accessed 2026-11-02.
  27. Latestcost. Pool automation system cost and installation prices. Accessed 2026-11-02.
  28. Shasta Pools. 5 smart pool tech features worth your money in 2026. Accessed 2026-11-02.
  29. U.S. Consumer Product Safety Commission. Don't Swim with Shocks: Electrical Safety In and Around Pools. Accessed 2026-11-02.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.