
Indoor Pool Cost: The Pool, the Room and the Dehumidifier, Priced
Indoor pool cost for a 16 x 32 ft concrete pool in a new 1,232 sq ft room comes to about $273,921 to $402,701 itemized; River Pools puts most US projects at $250,000 to $400,000.
- ✓Itemized, room includedPool, room shell, insulation, dehumidifier, ventilation, heat pump and cover, each with a dated source.
- ✓Dehumidifier math shownASHRAE evaporation for a 16 x 32 ft pool: 8.99 lb an hour, 207 pints a day.
- ✓Codes and insuranceIMC air and humidity rules, CDC pool room rules and the HO-3 mold and corrosion exclusions.
Key takeaways
- River Pools, a pool maker, puts most US indoor pool projects at $250,000 to $400,000 or more (June 2026); our line items for a 16 x 32 ft pool in a new 1,232 sq ft room come to $273,921 to $402,701.
- Without the room, the same pool, dehumidifier, ventilation, heat pump and cover cost $88,588 to $169,510, using California BOE pool rates of $94 to $173 per sq ft.
- A 16 x 32 ft pool at 82 F in an 86 F room at 60% humidity evaporates about 8.99 lb of water an hour, 207 pints a day, by the ASHRAE equation (IBPSA 2025); a cover used 20 hours a day cuts that 58.3%.
- The model mechanical code requires 0.48 cfm of outdoor air per sq ft of pool and deck and caps recirculated pool air at 60% humidity (IMC 403 as adopted in Washington), 591 cfm for this room.
- Covered 20 hours a day, the indoor pool’s evaporation heat costs about $316 a year with a heat pump at 2025 prices, against $327 for a typical outdoor heated season (PC&S heating study).
- The standard ISO HO-3 homeowners form excludes mold, fungus or wet rot (with one plumbing and appliance exception) and rust or other corrosion, the two ways a badly ventilated pool room fails.
How much does an indoor pool cost in 2026?
An indoor pool costs $250,000 to $400,000 or more for most US projects, per River Pools in June 2026, because the room around it costs more than the pool. Itemized at California assessor rates, a 16 x 32 ft concrete pool in a new 28 x 44 ft room comes to $273,921 to $402,701, and $88,588 to $169,510 in a room you already have.
| Source | Type of source | What it says an indoor pool costs | Date | What it covers |
|---|---|---|---|---|
| River Pools | Fiberglass pool maker | $250,000 to $400,000 or more; structure $120,000 to $200,000 or more; dehumidification $25,000 to $40,000 | updated Jun 29, 2026 | Pool, building and dehumidifier |
| River Pools | Fiberglass pool maker | About $200,000; dehumidification $20,000 to $30,000; enclosure $250 and up per sq ft | updated May 22, 2025 | Pool plus enclosure |
| HFS Financial | Pool lender | $100,000 to $500,000 or more, most often $150,000 to $250,000; dehumidifier $15,000 to $40,000 installed | modified May 14, 2026 | Whole project |
| Fixr | Cost guide | $95,000 average, $40,000 to $200,000; dehumidifier $2,400 to $20,000 | updated Jan 31, 2025 | Pool install; enclosure mostly excluded |
| PoolResearch | Pool blog | $90,000 to $200,000; addition $60 to $200 per sq ft; dehumidifier $2,000 to $40,000 | modified Jan 9, 2024 | Pool plus enclosure |
| City of Los Angeles permits | Public record | $30,000 median for 19 indoor or interior pools, same as other new pools | 2015 to 2026 | Pool permit only; building permitted separately |
| Mesa and Nashville permits | Public record | Pool houses $48.30 to $444.54 per sq ft, median $159.59 (7 permits) | 2021 to 2025 | Accessory building only |
| California BOE AH 531 | State assessor schedule | $94 to $173 per sq ft of concrete pool; $138.42 to $208.71 per sq ft for C-5 to C-7 houses of 1,200 sq ft | January 2026 | Replacement cost |
Sources: River Pools (2026), River Pools (2025), HFS Financial, Fixr, PoolResearch, City of Los Angeles permits, PC&S permit extract, California BOE AH 531; accessed 2026-11-01. Download CSV
The ranges differ because the sources price different things. Fixr‘s $95,000 average covers installing the pool indoors and mostly leaves out the enclosure, while River Pools adds a structure of $120,000 to $200,000 or more and a dehumidification system of $25,000 to $40,000. HFS Financial, a pool lender, says most mid-size residential projects fall between $150,000 and $250,000.
Permits show the same split. From 2015 to 2026, 19 Los Angeles pool permits that describe an indoor or interior pool declared a $30,000 median, identical to the $30,000 median of 16,402 other new pools, because the building is permitted on its own; one Austin permit reads “new indoor pool (pool house permitted separately)” (PC&S permit extract).
| Measure | Figure | Date and place | Source |
|---|---|---|---|
| Indoor pool projects, typical start | $250,000 to $400,000 or more | United States, updated Jun 29, 2026 | River Pools |
| Indoor pool, average and range | $95,000; $40,000 to $200,000 | United States, updated Jan 31, 2025 | Fixr |
| 16 x 32 ft concrete pool in a new 1,232 sq ft room, itemized | $273,921 to $402,701 | California cost basis, 2026 | PC&S line items |
| Same pool in an existing room (no shell or insulation) | $88,588 to $169,510 | California cost basis, 2026 | PC&S line items |
| Evaporation, 16 x 32 ft pool at 82 F, room 86 F and 60% RH | 8.99 lb an hour (207 pints a day) | ASHRAE equation, activity factor 0.5 | PC&S calculation |
| Same room at 84 F and 40% RH | 17.66 lb an hour (407 pints a day) | Same | PC&S calculation |
| Outdoor air for pool and deck | 0.48 cfm per sq ft | ASHRAE 62.1; IMC Table 403.3.1.1 | IMC as adopted in WAC 51-52-0403; CDC MAHC 2024 |
| Room relative humidity | 40% to 60%; below 60% when occupied | Public indoor pools | CDC MAHC 2024 Annex |
| Pool room pressure vs outdoors | 0.05 to 0.15 in. of water negative | ASHRAE Handbook, HVAC Applications (2015) | Quoted in Rocky Mountain ASHRAE presentation (2016) |
Sources: River Pools, Fixr, California BOE, IBPSA 2025, Rocky Mountain ASHRAE (Barrett, 2016), WAC 51-52-0403, CDC MAHC 2024 Annex; accessed 2026-11-01. Download CSV
What does the room around an indoor pool cost per square foot?
A room that can hold pool humidity costs far more per square foot than a cover over an outdoor pool. Glass enclosures run $30 to $75 per sq ft (Angi), additions $60 to $200 (PoolResearch), California’s assessor prices C-5 to C-7 wood-frame houses at $138.42 to $208.71, and seven pool house permits declared a $159.59 median.
Only the conditioned building types keep humid pool air out of walls and roof.
Source: Angi; PoolResearch; California BOE AH 531; Roll-A-Cover; River Pools; PC&S permit analysis. Download chart data (CSV)
| Building type | Cost per sq ft | For a 1,232 sq ft pool room | Source |
|---|---|---|---|
| Screen cage (no climate control) | $8 to $15 | $9,856 to $18,480 | Angi, Sep 2026 |
| Glass enclosure | $30 to $75 | $36,960 to $92,400 | Angi, Sep 2026 |
| Prefab pool enclosure | $35 to $75 | $43,120 to $92,400 | PoolResearch, Jan 2024 |
| Home addition or separate pool room | $60 to $200 | $73,920 to $246,400 | PoolResearch, Jan 2024 |
| Wood-frame house, BOE classes C-5 to C-7, 1,200 sq ft | $138.42 to $208.71 | $170,533 to $257,131 | California BOE AH 531, Jan 2026 |
| Retractable enclosure (maker) | $150 to $180 | $184,800 to $221,760 | Roll-A-Cover, Sep 2023 |
| Pool house permits, 7 in Mesa and Nashville | $48.30 to $444.54 | $59,506 to $547,673 | PC&S analysis of city permits, 2021 to 2025 |
| Indoor pool enclosure (maker) | $250 and up | $308,000 and up | River Pools, May 2025: $250 and up |
Sources: Angi (Sep 2026), PoolResearch (Jan 2024), California BOE AH 531 (Jan 2026, Shape A, 1,200 sq ft column), Roll-A-Cover (Sep 2023), River Pools (May 2025), PC&S permit extract (Mesa and Nashville pool house permits); PC&S multiplication. Download CSV
The room is sized from the deck, not the pool. A 16 x 32 ft pool with 6 ft of wetted deck on every side needs a 28 x 44 ft floor, 1,232 sq ft, the deck width that Desert Aire, a dehumidifier maker, proposed to ASHRAE and that ASHRAE answered depends on layout (ASHRAE IC 62-2001-09). Screen cages are in the table only for scale; the pool enclosure cost guide covers them in full.
The public records are pool houses, not pool rooms, so read them as a floor. Seven permits in Mesa and Nashville from 2021 to 2025 that state the building’s size declared $48.30 to $444.54 per sq ft; a 415 sq ft Mesa pool house with a full bathroom and mini kitchen declared $54,190.70, or $130.58 per sq ft. None of them holds a pool, a dehumidifier or a vapor retarder.
What does each line of an indoor pool budget cost?
Priced line by line, a 16 x 32 ft concrete pool inside a new 1,232 sq ft wood-frame room comes to $273,921 to $402,701. The room shell is 53% to 62% of that. The dehumidifier ($15,000 to $40,000), automatic cover ($12,000 to $22,000), insulation, ventilation and air conditioning add $49,400 to $90,820 that an outdoor pool does not need.
| Line item | Unit cost used | Quantity | Low $ | High $ | Source |
|---|---|---|---|---|---|
| Concrete pool, 16 x 32 ft | $94 to $173 per sq ft of pool surface | 512 sq ft | 48,128 | 88,576 | California BOE AH 531 (Jan 2026) |
| Pool room shell, wood frame | $138.42 to $172.46 per sq ft (classes C-5 to C-6) | 1,232 sq ft (28 x 44 ft) | 170,533 | 212,471 | California BOE AH 531 (Jan 2026), 1,200 sq ft column |
| Insulation, walls and ceiling | $5 to $7 per sq ft | 2,960 sq ft at a 12 ft ceiling | 14,800 | 20,720 | River Pools (May 2025) |
| Pool dehumidifier, installed | $15,000 to $40,000 | 1 unit | 15,000 | 40,000 | HFS Financial (May 2026) |
| Ventilation fan and air exchanger | $600 to $1,100 plus about $4,000 | 1 set | 4,600 | 5,100 | River Pools (May 2025) |
| Air conditioning | about $3,000 | 1 unit | 3,000 | 3,000 | River Pools (May 2025) |
| Pool heat pump with a new circuit | 2026 shelf price plus labor, circuit and permit | 1 unit | 5,675 | 10,649 | PC&S pool heater installation cost guide |
| Automatic pool cover | $12,000 to $22,000 | 1 cover | 12,000 | 22,000 | River Pools (May 2025) |
| Water to fill | $215.09 per 20,000 gallons | 17,234 gallons | 185 | 185 | PC&S cost to fill a pool study |
| Total, new pool room | 273,921 | 402,701 | PC&S sum | ||
| Total, pool in an existing room (no shell or insulation) | 88,588 | 169,510 | PC&S sum |
Sources: California BOE AH 531 (pool and house rates, Jan 2026), River Pools (insulation, ventilation, air exchanger, air conditioning, cover; May 2025), HFS Financial (dehumidifier, May 2026), PC&S pool heater installation cost, PC&S cost to fill a pool study; accessed 2026-11-01. Download CSV
The pool line uses the same California assessor rate as our concrete pool cost guide, $94 to $173 per sq ft of pool surface, so the two budgets agree. The room uses the assessor’s average wood-frame house classes C-5 and C-6 at the 1,200 sq ft column; a house rate includes kitchens and baths a pool room does not, but it leaves out pool-grade coatings and a continuous vapor retarder, so treat it as a middle estimate.
The heater line is a heat pump with a new 208 to 230 V circuit, $5,675 to $10,649 installed in our pool heater installation cost guide, because a gas heater inside the pool room needs a rating for that corrosive air (CDC MAHC Annex 4.6.4.4). Fixr lists dehumidifiers from $2,400 for whole-home units, but the worked example below shows why a pool room needs a unit sized in the hundreds of pints a day.
How big a dehumidifier does an indoor pool need?
Size it from evaporation. ASHRAE’s equation, 0.1 x area x vapor pressure difference x activity factor, gives 8.99 lb of water an hour for a 16 x 32 ft pool at 82 F in an 86 F room at 60% humidity: 207 pints a day uncovered. A drier 40% room doubles it to 407 pints, and a cover 20 hours a day cuts either by 58.3%.

| Step | Input | Arithmetic | Result | Source of the rule or input |
|---|---|---|---|---|
| Pool surface | 16 ft x 32 ft | 16 x 32 | 512 sq ft | Example pool |
| Water vapor pressure | 82 F pool water | Table value | 1.103 in Hg | Barrett, Rocky Mountain ASHRAE (2016) |
| Room air vapor pressure | 86 F air at 60% RH | Table value | 0.752 in Hg | Barrett (2016) |
| Evaporation, ASHRAE form | Activity factor 0.5 | 0.1 x 512 x (1.103 minus 0.752) x 0.5 | 8.99 lb an hour | ASHRAE (2019) equation and 0.5 factor, per IBPSA 2025 paper |
| Per day, uncovered | 24 hours | 8.99 x 24 | 215.7 lb (25.9 gallons) | PC&S arithmetic |
| In dehumidifier units | 1 pint of water = 1.0425 lb | 215.7 / 1.0425 | 207 pints a day | PC&S arithmetic |
| With a cover 20 h a day | Factor 0.15 while covered | 8.99 x 4 + 2.70 x 20 | 89.9 lb (86 pints) | IBPSA 2025: covered factor 0.15 |
| Drier room, 84 F at 40% RH | 0.413 in Hg | 0.1 x 512 x (1.103 minus 0.413) x 0.5 | 17.66 lb an hour | Barrett (2016) table value |
| Heat leaving the water, 86 F at 60% | 950 Btu per lb (Carrier 95 / ASHRAE 0.1) | 215.7 x 950 x 365 | 74.8 MMBtu a year | Carrier equation via Munters handbook, in Barrett (2016) |
| Outdoor air, pool plus 6 ft deck | 28 ft x 44 ft = 1,232 sq ft at 0.48 cfm | 1,232 x 0.48 | 591 cfm | IMC Table 403.3.1.1; MAHC 4.6.2.7.4 |
| Air changes from that outdoor air | 12 ft ceiling, 14,784 cubic ft | 591 x 60 / 14,784 | 2.4 an hour | PC&S arithmetic |
Sources: Smedegard, Stene and Georges, IBPSA Building Simulation 2025 (ASHRAE equation, factors 0.5 and 0.15); Barrett, Rocky Mountain ASHRAE, March 2, 2016 (vapor pressures, Carrier equation); IMC Table 403.3.1.1 (WAC 51-52-0403); PC&S arithmetic. Download CSV
- Measure the water surface512 sq ft for a 16 x 32 ft pool; add any spa separately with its own water temperature.
- Pick the water and room conditionsPool water 82 F (1.103 in Hg) and room air 2 to 5 F warmer at 40% to 60% RH, the ranges River Pools and the CDC MAHC Annex give.
- Apply the ASHRAE equation0.1 x 512 x (1.103 minus 0.752) x 0.5 = 8.99 lb an hour at 86 F and 60%.
- Convert to a daily loadx 24 = 215.7 lb, or 207 pints a day; a cover 20 h a day brings it to 86 pints.
- Add outdoor air0.48 cfm x 1,232 sq ft of pool and deck = 591 cfm; in winter this dry air removes moisture, in humid summers it adds load.
- Check the unit sizeFederal dehumidifier classes top out at “50.01 or more” pints a day for portable units, so a pool room needs a pool-rated unit sized by the designer.
Source: PC&S calculation from the ASHRAE equation (IBPSA 2025) and vapor pressures in Barrett, Rocky Mountain ASHRAE (2016). Download chart data (CSV)
| Room condition (pool water 82 F) | Water vapor pressure, in Hg | Room air vapor pressure, in Hg | Difference, in Hg | Evaporation uncovered, lb an hour | Uncovered all day, lb | Uncovered all day, pints | Covered 20 h a day, lb | Covered 20 h a day, pints | Cut from the cover |
|---|---|---|---|---|---|---|---|---|---|
| 84 F air, 40% RH | 1.103 | 0.413 | 0.690 | 17.66 | 423.9 | 407 | 176.6 | 169 | 58.3% |
| 86 F air, 60% RH | 1.103 | 0.752 | 0.351 | 8.99 | 215.7 | 207 | 89.9 | 86 | 58.3% |
Sources: vapor pressures from Barrett (2016); equation and activity factors from IBPSA 2025; PC&S arithmetic. Download CSV
The equation has limits its own users state. The IBPSA 2025 paper notes that ASHRAE’s 0.5 factor for an unoccupied pool lacks a published citation and that earlier field tests found the equation underpredicts evaporation with swimmers and overpredicts it without them; it measured a movable floor used as a cover at a factor of 0.15, up to 70% less (IBPSA 2025). Federal efficiency rules list portable dehumidifiers only up to “50.01 or more” pints a day (10 CFR 430.32(v)), a fraction of this load.
What do codes require for indoor pool ventilation and condensation?
Two numbers come from the model mechanical code: 0.48 cfm of outdoor air per sq ft of pool and deck, and 60% humidity or less for any pool air that is recirculated (IMC 403). The CDC’s Model Aquatic Health Code, written for public pools, adds negative room pressure, air at 30 fpm or less over the water and finishes designed for 80% humidity.
| Rule | Figure | Where it applies | Source |
|---|---|---|---|
| Recirculated pool room air must be dehumidified | Relative humidity 60% or less | IMC 403.2.1 item 2 (as adopted in Washington) | WAC 51-52-0403 |
| Outdoor air for pool and deck area | 0.48 cfm per sq ft | IMC Table 403.3.1.1; ASHRAE 62.1 | WAC 51-52-0403; CDC MAHC 4.6.2.7.4 |
| Deck area in that rate | Wetted deck; Desert Aire proposed 6 ft, ASHRAE said it depends on layout | ASHRAE 62 interpretation | ASHRAE IC 62-2001-09 |
| Air speed across the water | 30 fpm or less | Public indoor pools | CDC MAHC 4.6.2.7.9.1.3 |
| Room pressure | Negative to adjacent spaces and outdoors | Public indoor pools | CDC MAHC 4.6.2.7.8 |
| Purge capacity | 2 times the ASHRAE 62.1 rate | Public indoor pools | CDC MAHC 4.6.2.7.12.1 |
| Interior finishes | Designed for 80% relative humidity or more | Public indoor pools | CDC MAHC 4.2.2.1.1 |
| Paint used as the vapor retarder | 0.2 U.S. perm or less | Public indoor pools | CDC MAHC 4.2.2.2.2 |
| Vapor retarder and insulation | Sized for the coldest outdoor design day | Public indoor pools | CDC MAHC 4.2.2.2.1 |
| Dehumidification system design | ANSI/ACCA 10 Manual SPS | Washington amendment to IMC 403.2.1 item 2 (later edition) | WAC 51-52-0403 |
| Pool cover required by the energy rules | Outdoor heated pools only | Residential and public pools | 2024 ISPSC 303.1.3 |
Sources: IMC Section 403 as adopted in WAC 51-52-0403; ASHRAE interpretation IC 62-2001-09; CDC Model Aquatic Health Code, 2024; 2024 ISPSC Chapter 3; accessed 2026-11-01. Download CSV

Check which code your home falls under before treating these as requirements. Washington’s adopted text of IMC 403.2.1 says supply air to a pool and deck “shall not be recirculated unless such air is dehumidified to maintain the relative humidity of the area at 60 percent or less” (WAC 51-52-0403), and the MAHC applies to public pools; a one-family house is often built under the residential code, so ask the designer which rules the building department will apply.
Condensation is where pool rooms fail. The MAHC requires a vapor retarder and insulation sized for the coldest outdoor design day, paint used as the retarder rated 0.2 U.S. perm or less, (MAHC 4.2.2.2), and its Annex says windows are usually kept above the room’s dew point (Annex 4.2.2.5). A 2016 Rocky Mountain ASHRAE chapter talk quotes the ASHRAE handbook’s negative pressure of 0.05 to 0.15 in. of water and lists roof and structural failure among the results of poor envelope design (Barrett, 2016).
One energy rule does not apply indoors. The 2024 International Swimming Pool and Spa Code requires a vapor-retardant cover on outdoor heated pools only (Section 303.1.3), so an indoor pool cover is a moisture and energy choice, not a code item (ISPSC Chapter 3). Cover types and prices are compared in our automatic pool cover cost guide.
Compare indoor pool bids for your home
Does an indoor pool cost more to heat than an outdoor pool?
Per hour of swimming season, no; per year, often yes, because the indoor pool is heated all year. Evaporation from an uncovered 16 x 32 ft pool in an 86 F, 60% room carries off 74.8 MMBtu a year, $758 with a heat pump at 2025 prices; covered 20 hours a day it is $316, close to a typical outdoor season’s $327.
Source: PC&S cost-to-heat-a-pool study (EIA prices, COP 5.0); PC&S evaporation arithmetic. Download chart data (CSV)
| Case | Heat a year, MMBtu | Gas heater at 82%, $ (2025 prices) | Heat pump at COP 5.0, $ (2025 prices) |
|---|---|---|---|
| Indoor 16 x 32, 84 F air, 40% RH, uncovered all day | 147.0 | 2,655 | 1,491 |
| Indoor 16 x 32, 84 F air, 40% RH, covered 20 h a day | 61.2 | 1,105 | 621 |
| Indoor 16 x 32, 86 F air, 60% RH, uncovered all day | 74.8 | 1,351 | 758 |
| Indoor 16 x 32, 86 F air, 60% RH, covered 20 h a day | 31.2 | 563 | 316 |
| Outdoor pool, typical US gas-heated season (all heat losses) | 32.3 | 582 | 327 |
Sources: delivered-heat prices of $18.06 (gas at 82%) and $10.14 (heat pump at COP 5.0) per MMBtu and the outdoor season from the PC&S cost to heat a pool study (EIA prices, RECS 2020); indoor heat from the worked example above. Download CSV
The indoor figures count only the heat evaporation takes from the water, at the 950 Btu per lb implied by Carrier’s equation; they leave out heat lost through walls, heating the room air and the dehumidifier’s electricity. Outdoors, evaporation is the main source of energy loss, the IBPSA paper notes, and an outdoor pool loses about 37 to 84 inches of water a year to it depending on the city (PC&S evaporation study).
The room humidity setpoint moves the bill as much as the fuel. Holding the room at 40% instead of 60% roughly doubles evaporation and the heat that goes with it, $1,491 a year uncovered with a heat pump, which is why the MAHC Annex warns that rooms below 50% humidity raise refill, chemical and reheating costs (MAHC Annex 4.2.2.2). State prices for both fuels are in our cost to heat a pool study.
How do insurance and corrosion change indoor pool costs?
The policy covers the room, not its moisture problems. The ISO HO-3 homeowners form excludes mold, fungus or wet rot unless it comes from an accidental discharge of plumbing, heating, air conditioning or an appliance, and excludes rust or other corrosion. Citizens in Florida places a pool that adjoins the house under Coverage A, the dwelling limit.
| Issue | What the document says | Source |
|---|---|---|
| Mold in a pool room | HO-3 excludes mold, fungus or wet rot, except hidden mold from an accidental discharge of plumbing, heating, air conditioning or an appliance | ISO HO 00 03 05 11, Section I perils |
| Rust and corrosion | HO-3 excludes smog, rust or other corrosion, or dry rot | ISO HO 00 03 05 11, Section I perils |
| Where an attached pool sits on the policy | Coverage A (dwelling) if it adjoins or abuts the house | Citizens HO-3 Coverage Worksheet (11/25) |
| Gas heaters in the pool room | Should not be installed unless rated for the atmosphere; corrosive air can damage heater and venting | CDC MAHC 2024 Annex 4.6.4.4 |
| Ducts | Coated steel, aluminum and fabric ducts are options to consider | CDC MAHC 2024 Annex 4.2.2.3.4 |
| Chloramine vapor | Heavier than air; bring ventilation air in at deck level | Barrett, Rocky Mountain ASHRAE (2016) |
| Roof and structure | Poor envelope design can cause roof failure and structural failure | Barrett (2016) |
Sources: ISO HO 00 03 05 11 (Homesite copy filed with the Nevada Division of Insurance); Citizens HO-3 Coverage Worksheet; CDC MAHC 2024 Annex; Barrett, Rocky Mountain ASHRAE (2016). Download CSV
Condensation damage that builds up over months usually falls outside the HO 00 03 mold and corrosion wording, so the dehumidifier and vapor retarder are the protection, not the policy. Ask your insurer three things before you build: how the dwelling limit changes with the new room, whether the pool room changes liability terms, and how it treats moisture damage. Policy limits and pool exclusions are compared in our pool insurance guide.
Corrosion shows up first in metal: the MAHC Annex suggests coated steel, aluminum or fabric ducts and keeps combustion heaters out of the pool room unless rated for its air, and Barrett notes chloramine vapor is heavier than air, so ventilation air belongs at deck level. River Pools, a pool maker, warns that a poorly designed indoor pool room can corrode to the point of roof collapse (River Pools, 2025).
Is an indoor pool a good idea for your home?
It is when you will swim all year and can pay for the room: about $273,921 to $402,701 new, or $88,588 to $169,510 in an existing space, plus a dehumidifier sized in the hundreds of pints a day. If the goal is a longer season, an enclosure over an outdoor pool at $30 to $75 per sq ft in glass costs far less.
| If your situation is | Do this | Why (source) |
|---|---|---|
| The room would recirculate air without a dehumidifier | Add a pool dehumidifier sized from the evaporation load | IMC 403.2.1 item 2: 60% RH or less for recirculated pool air |
| The pool will sit uncovered most of the day | Budget an automatic cover | Cover 20 h a day cuts evaporation 58.3% in the worked example (IBPSA factor 0.15) |
| The plan puts a gas heater inside the pool room | Use a heat pump or a separate equipment room | CDC MAHC Annex 4.6.4.4: corrosive air, combustion risk |
| You live where winters freeze | Ask for the dew point calculation for walls, roof and windows | CDC MAHC 4.2.2.2.1 and Annex 4.2.2.5 |
| You already have a room, barn or basement to use | Price the pool, dehumidifier, ventilation, heat and cover: $88,588 to $169,510 | PC&S line items without the shell |
| You want year-round swimming for under about $100,000 | Price a glass or retractable enclosure over an outdoor pool, or a swim spa | Angi: glass $30 to $75 per sq ft; Roll-A-Cover $150 to $180 |
| The design blows air across the water faster than 30 fpm | Ask for a diffuser layout and a revised evaporation load | CDC MAHC 4.6.2.7.9.1.3 |
| You will insure the new room | Ask the insurer how the dwelling limit changes and how condensation damage is treated | HO-3 excludes mold (with one exception) and corrosion |
Sources: IMC 403 (WAC 51-52-0403), IBPSA 2025, CDC MAHC 2024, Angi, Roll-A-Cover, ISO HO-3; PC&S calculations. Download CSV
Can you get an indoor pool for $30,000? Only if the room already exists and the pool is small: the dehumidifier and cover alone start at $27,000 in our sources. For a vanishing edge instead of a roof, the infinity pool cost guide prices the other high-end pool on this site, and the swim spa cost guide covers a smaller year-round option.
How we compiled this
We read 21 documents in October and November 2026: the CDC Model Aquatic Health Code and its Annex, Washington’s adopted IMC Section 403, an ASHRAE interpretation, a 2016 ASHRAE chapter presentation, an IBPSA 2025 paper, the 2024 ISPSC, federal dehumidifier standards, the ISO HO-3 form and a Citizens worksheet, the California BOE schedule, six cost and maker pages (River Pools twice, Fixr, HFS Financial, PoolResearch, Angi, Roll-A-Cover) and three PC&S studies. The permit figures are our own analysis of 19 Los Angeles indoor pool permits and 7 pool house permits. We did not build a pool room or size a real dehumidifier; every figure is quoted or calculated from those documents with the inputs shown.
Frequently Asked Questions
What is the average cost of an indoor pool?
River Pools puts most US indoor pool projects at $250,000 to $400,000 or more (June 2026), and HFS Financial says $150,000 to $250,000 is most common for mid-size homes. Fixr’s $95,000 average mostly leaves out the building. Itemized, a 16 x 32 ft concrete pool in a new 1,232 sq ft room comes to $273,921 to $402,701.
Is an indoor pool a good idea?
It can be if you will swim all year and budget for the room and moisture control. The pool puts about 207 pints of water a day into the air uncovered, so it needs a pool dehumidifier, 0.48 cfm per sq ft of outdoor air and a vapor retarder; homeowners policies exclude mold and corrosion damage.
Is it more expensive to have an indoor pool?
Yes, to build and usually to run. The room, insulation, dehumidifier, ventilation, air conditioning and cover add $219,933 to $303,291 to a 16 x 32 ft concrete pool in our line items. Evaporation heat alone costs $316 to $1,491 a year with a heat pump at 2025 prices, depending on the cover and room humidity.
How big a dehumidifier does an indoor pool need?
Size it from the evaporation load. By ASHRAE’s equation, a 16 x 32 ft pool at 82 F in an 86 F room at 60% humidity gives off 8.99 lb of water an hour, about 207 pints a day; a drier 40% room doubles that. A cover 20 hours a day cuts the load 58.3%. Federal portable classes top out at 50.01 or more pints a day.
Do indoor pools need ventilation by code?
Under the model mechanical code, pool and deck areas need 0.48 cfm of outdoor air per sq ft, 591 cfm for a 1,232 sq ft room, and recirculated air must be dehumidified to 60% humidity or less (IMC 403). Public pools under the CDC MAHC also need negative pressure and a purge at twice that rate.
Does homeowners insurance cover an indoor pool?
The structure usually falls under the dwelling coverage when it adjoins the house, as Citizens’ HO-3 worksheet places an attached pool under Coverage A. The ISO HO-3 form excludes mold, fungus or wet rot (except hidden mold from an accidental plumbing or appliance discharge) and rust or other corrosion, so moisture damage is mostly yours.
Can I get an inground pool for $30,000?
Not indoors in a new room. Outdoors, some markets come close: Fort Worth fiberglass permits had a $52,000 median and Los Angeles gunite permits a $35,000 median from 2023 to 2025, though Los Angeles values run below cost guides. Indoors, a dehumidifier ($15,000 and up) and cover ($12,000 and up) take most of $30,000.
Sources
- River Pools. Indoor Swimming Pools 101 (updated Jun 29, 2026). Accessed 2026-11-01.
- River Pools. Indoor vs. Outdoor Pools: Costs, Considerations, FAQs (updated May 22, 2025). Accessed 2026-11-01.
- HFS Financial. Indoor pool planning guide (modified May 14, 2026). Accessed 2026-11-01.
- Fixr. How much does it cost to install an indoor swimming pool? (updated Jan 31, 2025). Accessed 2026-11-01.
- PoolResearch. Indoor Pool Cost Breakdown (modified Jan 9, 2024). Accessed 2026-11-01.
- Angi. How much does it cost to build a swimming pool enclosure?. Accessed 2026-11-01.
- Roll-A-Cover. Retractable pool enclosure cost. Accessed 2026-11-01.
- California State Board of Equalization. Assessors Handbook Section 531, Residential Building Costs (January 2026). Accessed 2026-11-01.
- Smedegard, Stene and Georges, NTNU. Quantifying the Influence of the Pool Cover on the Water Evaporation Rate in Indoor Swimming Halls (IBPSA Building Simulation 2025). Accessed 2026-11-01.
- Rocky Mountain ASHRAE chapter (Barrett). Humidity Control and the Building Thermal Envelope in Natatoriums (Mar 2, 2016). Accessed 2026-11-01.
- CDC. Model Aquatic Health Code, 5th edition (2024), Code. Accessed 2026-11-01.
- CDC. Model Aquatic Health Code, 5th edition (2024), Annex. Accessed 2026-11-01.
- Washington State Legislature. WAC 51-52-0403, International Mechanical Code Section 403 as adopted. Accessed 2026-11-01.
- ASHRAE. Interpretation IC 62-2001-09 of ANSI/ASHRAE Standard 62-2001. Accessed 2026-11-01.
- International Code Council. 2024 ISPSC Chapter 3, Section 303.1.3 (UpCodes, Austin edition). Accessed 2026-11-01.
- eCFR, U.S. Department of Energy. 10 CFR 430.32(v), dehumidifier standards. Accessed 2026-11-01.
- Insurance Services Office. HO 00 03 05 11 Homeowners 3 Special Form (Wayback capture Jun 11, 2026). Accessed 2026-11-01.
- Citizens Property Insurance Corporation. HO-3 Coverage Worksheet (11/25). Accessed 2026-11-01.
- City of Los Angeles. Building and Safety Permit Information, 2020 to present. Accessed 2026-11-01.
- U.S. Energy Information Administration. Natural gas prices. Accessed 2026-11-01.
- PC&S Research. Average cost to build a pool (permit study). Accessed 2026-11-01.
- PC&S Research. Cost to heat a pool. Accessed 2026-11-01.
- PC&S Research. Pool evaporation rate by city. Accessed 2026-11-01.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.