
Hot Tub Weight: Empty, Filled and Per Square Foot, With Pad and Deck Rules
Hot tub weight runs 500 to 1,240 lb empty and 2,570 to 6,852 lb filled with a 175 lb adult per seat across 30 current models, or 71 to 130 lb per square foot against a 40 psf deck.
- ✓30 models, one load tableGallons, dry weight, filled weight and lb per sq ft for every current Hot Spring model and 11 Sundance models.
- ✓Deck or pad, by the numbersIRC Table R301.5 sets 40 psf for decks; Hot Spring rates its tubs at 95 to 130 lb per sq ft.
- ✓Foundation rules from the makersA 4 in reinforced pad, level within 1/4 to 1/2 in, and when an engineer is required.
Key takeaways
- Hot tubs in the Hot Spring and Sundance lineups as of October 2026 hold 190 to 525 gallons and weigh 500 to 1,240 lb empty.
- Water weighs 8.34 lb per gallon (USGS: 62.366 lb per cubic foot at 60 F), so a 455 gallon tub carries 3,794.7 lb of water before anyone gets in.
- Hot Spring counts an adult weighing 175 lb in every seat in its filled weights; Sundance and the 2017 Jacuzzi specification handbook list water and shell only.
- IRC 2021 Table R301.5 sets a 40 lb per sq ft live load for decks, while Hot Spring’s pre-delivery instructions list 95 to 130 lb per sq ft of dead weight for its 19 models.
- Bullfrog Spas, Hot Spring and Sundance all call for a concrete pad at least 4 in thick; Hot Spring requires one under the Grandee and Envoy.
How much does a hot tub weigh?
Hot tub weight is 500 to 1,240 lb empty and 2,570 to 6,852 lb filled with a 175 lb adult in every seat, across 30 current models from Hot Spring and Sundance. A 2 to 3 seat tub fills to 2,570 to 3,125 lb; a 6 to 7 seat tub to 4,664 to 6,795 lb. Water is most of it: 190 to 525 gallons at 8.34 lb per gallon.
| Number | What it means | Source |
|---|---|---|
| 500 to 1,240 lb | Empty (dry) weight of 30 current Hot Spring and Sundance hot tubs | Maker spec pages, October 2026 |
| 190 to 525 gallons | Water capacity across the same 30 models | Maker spec pages |
| 8.34 lb | Weight of one gallon of water (62.366 lb per cu ft / 7.48 gal per cu ft) | USGS |
| 175 lb per seat | Occupant allowance Hot Spring adds to its filled weights | Hot Spring spec pages and pre-delivery instructions |
| 2,570 to 6,852 lb | Filled weight with a 175 lb adult in every seat | Hot Spring spec pages; PC&S calculation for Sundance |
| 95 to 130 lb per sq ft | Dead weight per square foot Hot Spring lists for its 19 models | Hot Spring pre-delivery instructions |
| 40 lb per sq ft | Minimum live load for decks | IRC 2021 Table R301.5 |
| 4 in | Minimum reinforced concrete pad thickness in Hot Spring, Bullfrog and Sundance guidance | Maker installation guides |
Sources: Hot Spring spec pages; Sundance spec pages; USGS water density; Hot Spring pre-delivery instructions; IRC 2021 Table R301.5; Bullfrog Spas. Accessed 2026-10-26. Download CSV
| Seats | Models | Gallons | Empty weight (lb) | Filled with 175 lb per seat (lb) | Lb per sq ft of footprint |
|---|---|---|---|---|---|
| 2 to 3 seats | 7 | 190 to 250 | 500 to 660 | 2,570 to 3,125 | 71 to 80 |
| 4 to 5 seats | 8 | 270 to 455 | 575 to 838 | 3,705 to 5,455 | 81 to 91 |
| 6 to 7 seats | 14 | 330 to 525 | 710 to 1,215 | 4,664 to 6,795 | 88 to 108 |
| 8 seats | 1 | 505 | 1,240 | 6,852 | 101 |
Sources: Hot Spring and Sundance spec pages (model year 2026), accessed 2026-10-26. Sundance filled weights with occupants are PC&S calculations. Download CSV
Filled weight = dry weight + gallons x 8.34 + 175 lb per seat.
Source: Hot Spring and Sundance spec pages, accessed 2026-10-26; Sundance totals are PC&S calculations. Download chart data (CSV)
How much does a 7 ft by 7 ft hot tub weigh? Four Hot Spring models measure 84 x 84 in: the Relay, Rhythm, Flair and Flash list 4,715 to 5,070 lb filled, counting 6 or 7 adults at 175 lb. The 84 x 84 in Sundance Edison lists 3,614 lb, which is water and shell only; add 6 adults and it reaches 4,664 lb.
How much does a 4 person hot tub weigh with water? The 4 seat Hot Spring Limelight Beam holds 295 gallons, weighs 700 lb empty and 3,860 lb filled with 4 adults. Across the 4 to 5 seat models in our table the range is 3,705 to 5,455 lb. Our homes with hot tubs study counts 10.1 million US homes with one in 2024.
How do you calculate a hot tub's filled weight?
Multiply the gallons by 8.34 lb, add the dry weight, then add 175 lb for every seat. For the 455 gallon, 7 seat Hot Spring Grandee that is 3,794.7 + 790 + 1,225 = 5,809.7 lb, which matches the 5,810 lb Hot Spring lists. Divide by the footprint in square feet for the load per square foot.
| Step | Input | Result | Source |
|---|---|---|---|
| Water | 455 gallons x 8.34 lb per gallon | 3,794.7 lb | Hot Spring spec page; USGS water density |
| Add dry weight | 3,794.7 + 790 lb | 4,584.7 lb | Hot Spring spec page |
| Add 7 adults at 175 lb | 4,584.7 + 1,225 lb | 5,809.7 lb | Hot Spring lists 5,810 lb filled |
| Footprint | 100 in x 91 in / 144 | 63.2 sq ft | Hot Spring Highlife pre-delivery instructions |
| Load over the full footprint | 5,810 / 63.2 | 91.9 lb per sq ft | PC&S calculation |
| Hot Spring's dead weight figure | Spec chart | 125 lb per sq ft | Hot Spring Highlife pre-delivery instructions |
| Bearing area that 125 implies | 5,810 / 125 | 46.5 sq ft, 74% of the footprint | PC&S calculation |
| Compare with a code-minimum deck | 125 / 40 | 3.1 times the deck live load | IRC 2021 Table R301.5 |
Sources: Hot Spring Grandee specifications; Hot Spring Highlife pre-delivery instructions; USGS; IRC 2021 Table R301.5. Arithmetic by PC&S. Download CSV

“Filled weight” does not mean the same thing at every maker. Hot Spring’s figure includes an adult weighing 175 lb for every seat. Sundance’s 2026 pages, the 2017 Jacuzzi handbook and the Arctic Spas Kodiak spec page (3,828 lb wet from 342 gallons and 973 lb dry) list water and shell only. The Jacuzzi handbook tells designers to add the occupant weight at maximum seating and the weight of any support decking.
Footprint arithmetic understates the load the makers design for. Hot Spring’s 125 lb per sq ft for the Grandee equals 5,810 lb resting on 46.5 sq ft, 74% of the footprint; the guide does not say how the figure is derived. Endless Pools does the same for swim spas, as our swim spa cost guide shows. Design to the larger number.
Hot tub weight and load by model: 30 tubs compared
Every one of the 30 tubs loads its footprint at 1.8 to 3.25 times the 40 psf a code deck is built for. Hot Spring publishes its own dead weight figure, 95 lb per sq ft for the 2 seat TX up to 130 for the Vanguard and Pulse. For Sundance we divide water, shell and 175 lb per seat by length times width: 72 to 101 lb per sq ft.
| Model | Seats | Footprint (in) | Sq ft | Gallons | Dry weight (lb) | Water at 8.34 lb/gal (lb) | Filled with 175 lb per seat (lb) | Maker-stated filled weight (lb) | Lb per sq ft of footprint | Maker dead weight (lb per sq ft) | Times the 40 psf deck load | Source |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hot Spring Highlife Vanguard | 6 | 87 x 87 | 52.6 | 375 | 710 | 3,128 | 4,890 | 4,890 | 93 | 130 | 3.25 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Limelight Pulse | 7 | 89 x 89 | 55.0 | 445 | 1,015 | 3,711 | 5,950 | 5,950 | 108 | 130 | 3.25 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf |
| Hot Spring Highlife Grandee | 7 | 100 x 91 | 63.2 | 455 | 790 | 3,795 | 5,810 | 5,810 | 92 | 125 | 3.12 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Highlife Aria | 5 | 87 x 87 | 52.6 | 365 | 680 | 3,044 | 4,600 | 4,600 | 88 | 125 | 3.12 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Highlife Prodigy | 5 | 84 x 78 | 45.5 | 270 | 575 | 2,252 | 3,705 | 3,705 | 81 | 125 | 3.12 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Limelight Flash | 7 | 84 x 84 | 49.0 | 360 | 845 | 3,002 | 5,070 | 5,070 | 103 | 125 | 3.12 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf |
| Hot Spring Hot Spot Rhythm | 7 | 84 x 84 | 49.0 | 330 | 845 | 2,752 | 4,820 | 4,820 | 98 | 125 | 3.12 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf |
| Hot Spring Highlife Envoy | 5 | 100 x 91 | 63.2 | 455 | 785 | 3,795 | 5,455 | 5,455 | 86 | 120 | 3.00 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Limelight Prism | 7 | 110 x 91 | 69.5 | 525 | 1,190 | 4,378 | 6,795 | 6,795 | 98 | 120 | 3.00 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf |
| Hot Spring Limelight Flair | 6 | 84 x 84 | 49.0 | 335 | 875 | 2,794 | 4,720 | 4,720 | 96 | 120 | 3.00 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf |
| Hot Spring Hot Spot Relay | 6 | 84 x 84 | 49.0 | 340 | 830 | 2,836 | 4,715 | 4,715 | 96 | 120 | 3.00 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf |
| Hot Spring Highlife Sovereign | 5 | 80 x 93 | 51.7 | 330 | 600 | 2,752 | 4,230 | 4,230 | 82 | 115 | 2.88 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Highlife Jetsetter LX | 3 | 84 x 68 | 39.7 | 250 | 515 | 2,085 | 3,125 | 3,125 | 79 | 115 | 2.88 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Highlife Jetsetter | 3 | 84 x 68 | 39.7 | 245 | 500 | 2,043 | 3,070 | 3,070 | 77 | 115 | 2.88 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Hot Spring Hot Spot Pace | 5 | 82 x 82 | 46.7 | 300 | 775 | 2,502 | 4,150 | 4,150 | 89 | 115 | 2.88 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf |
| Hot Spring Limelight Beam | 4 | 80 x 80 | 44.4 | 295 | 700 | 2,460 | 3,860 | 3,860 | 87 | 110 | 2.75 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-limelight-pre-delivery-instructions.pdf |
| Hot Spring Hot Spot SX | 3 | 72 x 77 | 38.5 | 230 | 645 | 1,918 | 3,090 | 3,090 | 80 | 105 | 2.62 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf |
| Sundance Aspen | 8 | 110 x 89 | 68.0 | 505 | 1,240 | 4,212 | 6,852 | 5,452 (no occupants stated) | 101 | Not published | 2.52 | https://www.sundancespas.com/products/aspen-my26 |
| Hot Spring Hot Spot Stride | 3 | 84 x 65 | 37.9 | 225 | 570 | 1,876 | 2,975 | 2,975 | 78 | 100 | 2.50 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf |
| Sundance Chelsee | 7 | 89 x 89 | 55.0 | 400 | 873 | 3,336 | 5,434 | 5,210 (no occupants stated) | 99 | Not published | 2.47 | https://www.sundancespas.com/products/chelsee-my26 |
| Sundance Edison | 6 | 84 x 84 | 49.0 | 345 | 737 | 2,877 | 4,664 | 3,614 (no occupants stated) | 95 | Not published | 2.38 | https://www.sundancespas.com/products/edison-my26 |
| Hot Spring Hot Spot TX | 2 | 72 x 72 | 36.0 | 190 | 635 | 1,585 | 2,570 | 2,570 | 71 | 95 | 2.38 | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-hot-spot-pre-delivery-instructions.pdf |
| Sundance Hamilton | 6 | 89 x 89 | 55.0 | 393 | 826 | 3,278 | 5,154 | 4,996 (no occupants stated) | 94 | Not published | 2.34 | https://www.sundancespas.com/products/hamilton-my26 |
| Sundance Optima | 7 | 89 x 89 | 55.0 | 355 | 944 | 2,961 | 5,130 | 3,905 (no occupants stated) | 93 | Not published | 2.33 | https://www.sundancespas.com/products/optima-my26 |
| Sundance Montclair | 5 | 91 x 74 | 46.8 | 310 | 790 | 2,585 | 4,250 | 4,251 (no occupants stated) | 91 | Not published | 2.27 | https://www.sundancespas.com/products/montclair-my26 |
| Sundance Kingston | 7 | 100 x 92 | 63.9 | 401 | 1,215 | 3,344 | 5,784 | 4,392 (no occupants stated) | 91 | Not published | 2.26 | https://www.sundancespas.com/products/kingston-my26 |
| Sundance Cameo | 6 | 89 x 89 | 55.0 | 350 | 889 | 2,919 | 4,858 | 3,808 (no occupants stated) | 88 | Not published | 2.21 | https://www.sundancespas.com/products/cameo-my26 |
| Sundance Marin | 5 | 91 x 76 | 48.0 | 295 | 838 | 2,460 | 4,173 | 3,298 (no occupants stated) | 87 | Not published | 2.17 | https://www.sundancespas.com/products/marin-my26 |
| Sundance Dover | 3 | 82 x 69 | 39.3 | 230 | 620 | 1,918 | 3,063 | 3,247 (no occupants stated) | 78 | Not published | 1.95 | https://www.sundancespas.com/products/dover-my26 |
| Sundance Capri | 3 | 82 x 69 | 39.3 | 195 | 660 | 1,626 | 2,811 | 2,286 (no occupants stated) | 72 | Not published | 1.79 | https://www.sundancespas.com/products/capri-my26 |
Sources: Hot Spring Highlife, Limelight and Hot Spot pre-delivery instructions and spec pages; Sundance 2026 spec pages (Aspen, Optima and others linked in the CSV); water at 8.34 lb per gallon from USGS. Loads are PC&S calculations. Accessed 2026-10-26. Download CSV
IRC 2021 Table R301.5 sets a 40 psf live load for decks; every model here is 1.8 to 3.25 times that.
Source: Hot Spring pre-delivery instructions (2025 files) and Sundance spec pages, accessed 2026-10-26; PC&S calculation for Sundance. Download chart data (CSV)

Can a deck hold a hot tub?
Not a deck built only to code minimums. IRC Table R301.5 sets 40 lb per sq ft of live load for decks, and the AWC DCA 6 deck guide adds 10 psf of dead load but says decks supporting hot tubs are beyond its scope. Hot Spring allows a deck rated above the tub’s dead weight, 95 to 130 lb per sq ft, once a contractor or engineer checks it. Framing, footing math and permit rules for a deck that can carry one are in our guide to a hot tub on deck.
| Rule or rating | Load | What it covers | Source |
|---|---|---|---|
| IRC 2021 Table R301.5, balconies (exterior) and decks | 40 lb per sq ft live load | Minimum uniformly distributed live load for a code deck | International Code Council via UpCodes |
| AWC DCA 6 prescriptive deck guide | 40 lb per sq ft live + 10 lb per sq ft dead | Its span tables; decks supporting hot tubs are outside its scope | American Wood Council DCA 6 (2015) |
| Hot Spring Hot Spot TX (2 seats) | 95 lb per sq ft dead weight | Lowest figure in the Hot Spring spec charts | Hot Spring Hot Spot pre-delivery instructions |
| Hot Spring Grandee (7 seats) | 125 lb per sq ft dead weight | Deck must withstand more than this, or a 4 in reinforced pad | Hot Spring Highlife pre-delivery instructions |
| Hot Spring Vanguard and Limelight Pulse | 130 lb per sq ft dead weight | Highest figure in the Hot Spring spec charts | Hot Spring pre-delivery instructions |
| 30 models, full footprint arithmetic | 71 to 108 lb per sq ft | Filled weight with 175 lb per seat divided by length x width | PC&S calculation from maker specs |
Sources: IRC 2021 Table R301.5; AWC DCA 6 (2015); Hot Spot and Highlife pre-delivery instructions; PC&S calculations. Accessed 2026-10-26. Download CSV
Hot Spring’s Highlife pre-delivery instructions say to consult a qualified building contractor or structural engineer before placing a spa on an raised deck or indoors, and that the weight per square foot must not exceed the structure’s rated capacity. Bullfrog Spas gives the same advice for adding a tub to an existing deck. Ask the engineer for the deck’s rated load in lb per sq ft and compare it with the dead weight figure for your model.
Deck builders who work around pools and spas are listed through our pool deck contractors page, and whether the deck or pad needs its own permit is covered in our guide to pool permits.
What foundation does a hot tub need?
A reinforced concrete pad at least 4 in thick, by Hot Spring, Bullfrog and Sundance guidance, with the rebar or mesh tied to a bond wire. Keep it level: Sundance wants 1/4 in across the footprint and Bullfrog no more than 1/2 in in 8 ft. Bullfrog and Sundance also list pavers or compacted gravel, but Hot Spring requires concrete under its Grandee and Envoy.
| Source | Concrete pad | Level or slope | Deck | Other surfaces | Source link |
|---|---|---|---|---|---|
| Hot Spring Highlife pre-delivery instructions | Reinforced, at least 4 in; required for Grandee and Envoy, recommended for the rest; rebar or mesh tied to a bond wire | Slope 1/2 in per 10 ft preferred; no shims or point leveling | Load capacity greater than the spa's dead weight; consult a contractor or structural engineer | Brick or wood decking under the entire spa | https://www.hotspring.com/wp-content/uploads/2025/02/hot-spring-spas-highlife-pre-delivery-instructions.pdf |
| Bullfrog Spas | At least 4 in, reinforced with rebar or mesh tied to a bond wire; 6 in or more for heavier tubs and swim spas | No more than 1/2 in in an 8 ft run; no shims | Consult a structural engineer for an existing deck | Pavers, pea gravel, crushed rock of 1.5 in or more | https://www.bullfrogspas.com/hot-tub-foundation/ |
| Sundance Spas | Poured concrete at least 4 in thick | Level within 1/4 in across the footprint | Reinforced decking built for the load | Compacted gravel with drainage | https://www.sundancespas.com/products/optima-my26 |
| Jacuzzi | 4 to 6 in, reinforced with rebar or wire mesh | Not stated | Special engineering, permits and inspections to build a tub into a deck | Gravel or prefabricated pads | https://www.jacuzzi.com/en-us/Hot-Tub-Pads.html |
| IRC 2021 Table R402.2 | 2,500, 3,000 or 3,500 psi at 28 days for porch and carport slabs exposed to weather, by weathering potential | Not covered | Not covered | Air entrainment of 5% to 7% where weathering is moderate or severe | https://up.codes/viewer/austin/irc-2021/chapter/4/foundations |
Sources: Hot Spring; Bullfrog Spas; Sundance Spas; Jacuzzi; IRC 2021 Table R402.2. Accessed 2026-10-26. Download CSV
None of the maker guides we read names a concrete strength. The closest code row is IRC 2021 Table R402.2, which sets 2,500 psi at 28 days for porch and carport slabs exposed to weather where weathering is negligible, 3,000 psi where it is moderate and 3,500 psi where it is severe, air-entrained at 5% to 7%. Ask the concrete contractor which column your county uses.
| Step | Input | Result | Source |
|---|---|---|---|
| Tub footprint | Hot Spring Grandee, 100 x 91 in | 8.3 x 7.6 ft | Hot Spring Highlife pre-delivery instructions |
| Pad size | 9 x 9 ft | 81 sq ft | PC&S example |
| Concrete at 4 in thick | 1 cubic yard covers 81 sq ft at 4 in | 1 cubic yard | HomeGuide, February 3, 2026 |
| Installed cost, low | 81 sq ft x $6 | $486 | HomeGuide slab cost, $6 to $12 per sq ft |
| Installed cost, high | 81 sq ft x $12 | $972 | HomeGuide slab cost |
Sources: HomeGuide concrete slab cost (February 3, 2026); Hot Spring Highlife pre-delivery instructions. Arithmetic by PC&S. Download CSV
The bond wire is an electrical requirement, not a structural one: Hot Spring and Bullfrog both tie the pad’s reinforcing to it for grounding. Our pool electrocution statistics report counts 33 CPSC-recorded electrocution deaths in US pools and spas from 2002 to 2018. Full install budgets, wiring included, are in our hot tub cost guide.
Are hot tubs heavy to move?
Yes. Even empty, the 30 tubs here weigh 500 to 1,240 lb, so drain one before moving it. Hot Spring dealers roll tubs on their side on a delivery cart, which needs a path at least 33 to 38 in wide for its Highlife models, or the cart’s width if greater, and Hot Spring says about ten percent of installs need a crane to lift the tub over a house or wall. Gate and overhead clearances for nine models, plus cover lifter space, are worked out in our hot tub dimensions guide.
| Model (on its side) | Width W | Length L | Height H | Empty weight (lb) | Source |
|---|---|---|---|---|---|
| Hot Spring Grandee | 38 in | 100 in | 91 in | 790 | Hot Spring Highlife pre-delivery instructions |
| Hot Spring Vanguard | 36 in | 87 in | 87 in | 710 | Hot Spring Highlife pre-delivery instructions |
| Hot Spring Sovereign | 33 in | 93 in | 80 in | 600 | Hot Spring Highlife pre-delivery instructions |
| Hot Spring Jetsetter | 33 in | 84 in | 68 in | 500 | Hot Spring Highlife pre-delivery instructions |
Source: Hot Spring Highlife pre-delivery instructions, Delivery Access chart; empty weights from Hot Spring spec pages. Accessed 2026-10-26. Download CSV
How many people does it take to lift a hot tub? No maker we read gives a headcount, because none lifts by hand. Bullfrog says most spas move on a dolly or slip sheet, never resting weight on the equipment door, and Hot Spring allows no more than 6 consecutive stairs without a landing on the delivery path. Empty it first; our guide on how to drain a hot tub has drain times by tub size.
Where can you put a hot tub, and what does the spot need?
On the ground, a 4 in reinforced pad handles every tub in our table. On an existing deck, nothing goes in until an engineer confirms a rating above the tub’s dead weight, 95 to 130 lb per sq ft for Hot Spring. Balconies, rooftops and indoor floors always need an engineer, and anything sized for swimming follows swim spa rules.

| If your situation is | Do this | Why (source) |
|---|---|---|
| Ground-level install, any tub in the model table | Pour a reinforced concrete pad at least 4 in thick, rebar or mesh tied to a bond wire | Hot Spring, Bullfrog and Sundance guidance |
| Hot Spring Grandee or Envoy outdoors | A 4 in reinforced pad is required, not optional | Hot Spring Highlife pre-delivery instructions |
| Existing deck built to code minimums | Do not place the tub until an engineer checks it: 40 psf live load against 95 to 130 lb per sq ft | IRC Table R301.5; Hot Spring spec charts |
| New deck designed from the AWC DCA 6 tables | Have the hot tub area engineered separately | DCA 6 puts decks supporting hot tubs outside its scope |
| Balcony, rooftop or indoor floor | Hire a structural engineer before buying | Hot Spring: consult a contractor or engineer for raised decks and indoors |
| Pavers or gravel instead of concrete | Compact the base and keep it within 1/2 in of level over 8 ft | Bullfrog Spas |
| Cold-climate slab exposed to weather | Ask for 3,500 psi air-entrained concrete | IRC Table R402.2, severe weathering column |
| Tub is longer than 12 ft or meant for swimming | Use swim spa rules: 6 in reinforced slab | Endless Pools via PC&S swim spa cost guide |
Sources: Hot Spring; Bullfrog Spas; Sundance; IRC Table R301.5; IRC Table R402.2; AWC DCA 6; PC&S swim spa cost guide. Download CSV
Built-in spas avoid the question by sharing the pool’s structure; our spa construction guide covers what a poured spa costs and how it is built.
How we compiled this
In October 2026 we opened 30 maker spec pages (19 Hot Spring, 11 Sundance), Hot Spring’s three 2025 pre-delivery instruction files, the 2017 Jacuzzi specification handbook, Bullfrog and Jacuzzi foundation pages, IRC 2021 Tables R301.5 and R402.2, the AWC DCA 6 deck guide, USGS water density data and HomeGuide’s slab prices. Loads are our arithmetic; we did not weigh, install or load-test any tub, and we left out forum posts and dealer estimates.
Frequently Asked Questions
How heavy is a typical hot tub?
Across 30 current Hot Spring and Sundance models, a hot tub weighs 500 to 1,240 lb empty and 2,570 to 6,852 lb filled with a 175 lb adult in every seat. A 6 to 7 seat tub, the most common size in our table, fills to 4,664 to 6,795 lb. Water is the bulk of it at 8.34 lb per gallon (USGS).
How much does a 7 ft by 7 ft hot tub weigh?
Hot Spring’s four 84 x 84 in models, the Relay, Rhythm, Flair and Flash, list 4,715 to 5,070 lb filled, counting 6 or 7 adults at 175 lb each. The 84 x 84 in Sundance Edison lists 3,614 lb for water and shell alone, or 4,664 lb with 6 adults. Empty, these tubs weigh 737 to 875 lb.
How much does a hot tub weigh per square foot?
Hot Spring lists 95 to 130 lb per square foot of dead weight for its 19 models, occupants included. Dividing filled weight by length times width gives less, 71 to 108 lb per square foot across our 30 models, because makers assume a smaller bearing area. Either figure is two to three times the 40 psf live load in IRC Table R301.5.
Are hot tubs heavy to move?
Yes. Empty tubs in our table weigh 500 to 1,240 lb, so they move on a dolly, cart or slip sheet rather than by hand (Bullfrog). Hot Spring delivers on a cart with the tub on its side, needs a path at least 33 to 38 in wide for Highlife models and says about ten percent of installs need a crane. Drain the tub before any move. What movers charge for that job, from $200 in the same yard to over $5,000 long distance, is in our guide on how much it costs to move a hot tub.
How many people does it take to lift a hot tub?
Makers do not lift tubs by hand, so none publishes a headcount. An empty hot tub weighs 500 to 1,240 lb in our 30 model table. Bullfrog moves spas on a dolly or slip sheet and warns never to let the equipment door bear the weight; Hot Spring uses a delivery cart and limits the route to 6 stairs between landings.
How thick of a concrete slab do I need for a hot tub?
At least 4 in of reinforced concrete, by Hot Spring, Bullfrog and Sundance guidance, with the rebar or mesh tied to a bond wire. Bullfrog suggests 6 in or more for heavier tubs and swim spas, and Jacuzzi says 4 to 6 in. IRC Table R402.2 sets 2,500 to 3,500 psi for porch slabs exposed to weather.
Can a deck hold a hot tub?
Only if it was built or reinforced for one. IRC Table R301.5 sets 40 lb per sq ft of live load for decks, and the AWC DCA 6 guide excludes decks supporting hot tubs. Hot Spring allows a deck rated above the tub’s dead weight, 95 to 130 lb per sq ft for its models, after a contractor or structural engineer confirms it.
Sources
- Hot Spring Spas (Watkins Wellness). Highlife Collection Pre-Delivery Instructions (spec chart, deck and foundation). Accessed 2026-10-26.
- Hot Spring Spas (Watkins Wellness). Limelight Collection Pre-Delivery Instructions. Accessed 2026-10-26.
- Hot Spring Spas (Watkins Wellness). Hot Spot Collection Pre-Delivery Instructions. Accessed 2026-10-26.
- Hot Spring Spas. Model specification pages for 19 Hot Spring hot tubs (Grandee to TX). Accessed 2026-10-26.
- Sundance Spas. Model specification pages for 11 Sundance hot tubs, model year 2026 (Aspen to Capri). Accessed 2026-10-26.
- Jacuzzi Hot Tubs. Dimension and Specification Handbook (2017). Accessed 2026-10-26.
- Arctic Spas Spokane. Kodiak technical specifications (dealer-hosted). Accessed 2026-10-26.
- U.S. Geological Survey. Water Density. Accessed 2026-10-26.
- International Code Council via UpCodes. IRC 2021 Chapter 3, Table R301.5 Minimum Uniformly Distributed Live Loads. Accessed 2026-10-26.
- International Code Council via UpCodes. IRC 2021 Chapter 4, Table R402.2 Minimum Specified Compressive Strength of Concrete. Accessed 2026-10-26.
- American Wood Council. DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015 IRC). Accessed 2026-10-26.
- Bullfrog Spas. Picking the Right Hot Tub Foundation. Accessed 2026-10-26.
- Bullfrog Spas. Delivery & Installation. Accessed 2026-10-26.
- Bullfrog Spas. How Much Does a Hot Tub Weigh and Can You Move it By Yourself?. Accessed 2026-10-26.
- Jacuzzi. Hot Tub Pads: Do You Really Need One?. Accessed 2026-10-26.
- HomeGuide. How Much Does a Concrete Slab Cost? (February 3, 2026). Accessed 2026-10-26.
- Pool Construction & Service research. How Many Homes Have a Hot Tub? (EIA RECS 2024 tabulation). Accessed 2026-10-26.
- Pool Construction & Service research. Pool Electrocution Statistics. Accessed 2026-10-26.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.