Skip to content
Pool equipment pad with an open sand filter tank and unmarked bags of filter sand
Pool care: filters

How to Change Sand in Pool Filter Tanks: Steps, Sand by Model and Cost

How to change sand in pool filter tanks: drain, remove the valve, dig out the old sand, check the laterals, half-fill with water, pour the label weight of No. 20 silica and backwash 2 minutes.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓21 filters, one tableLabel sand weights from 50 lb to 925 lb for Hayward, Pentair, Jandy and Intex models, with bag counts.
  • ✓Water first, then sandHayward and Pentair fill the tank about half with water so falling sand does not crack the laterals.
  • ✓Silica is a dust hazardA pool sand SDS lists Category 1A carcinogen by inhalation: keep it damp and wear an N-95.
Quick answer
Turn the pump off, drain the tank, lift off the valve and remove the old sand damp. Check every lateral, cap the standpipe, fill the tank about half with water and pour the nameplate weight of No. 20 silica (300 lb for a Hayward S244T). Leave 10 inches of space, refit the valve and backwash at least 2 minutes.
No. 20 silica, 0.45 to 0.55 mm
Sand grade
300 lb (6 bags)
Hayward S244T
Source: Hayward
3 to 6 years
Sand life
$83.70 to $86.10
DIY sand cost (S244T)

Key takeaways

  • Load the weight on your nameplate: 50 to 700 lb across the Hayward ProSeries range, 175 to 925 lb across the Pentair Triton range and 300 or 600 lb in Jandy JS filters.
  • Hayward, Pentair and Jandy all specify No. 20 silica at about 0.45 to 0.55 mm; Intex accepts 0.45 to 0.85 mm or glass at about 0.70 of the sand weight.
  • Fill the tank about half with water before pouring, cap the standpipe, keep at least 10 inches of space above the sand (Hayward) and backwash 2 minutes or more on startup.
  • Sand lasts 3 to 6 years in EPA WaterSense data and about 5 years in Hayward’s; the 2024 MAHC has public pools inspect it yearly.
  • Filter sand is crystalline silica: one pool filter sand SDS lists it as a Category 1A carcinogen by inhalation, so keep it damp and wear an N-95.
  • A Hayward S244T takes 6 bags, $83.70 to $86.10 in sand at October 27, 2026 prices, against $402.94 to $459 for two pool companies’ sand-change services.

How much sand does a pool filter need?

Exactly the weight on the filter’s label, because tank sizes differ. Hayward’s ProSeries runs from 50 lb in an S144T to 700 lb in an S360T2, Pentair’s Sand Dollar from 250 to 350 lb, its Triton from 175 to 925 lb, Jandy’s JS from 300 to 600 lb and Intex’s above-ground pump combos from 50 to 121 lb. Divide by 50 for the bag count.

Pool filter sand by model: pounds of No. 20 silica, bag count, gravel option and space above the bed for 21 filters
Filter modelTypeNo. 20 silica sand (lb)50 lb bagsGravel or other optionSpace above sandSand grade on the labelSource
Hayward ProSeries S144TTop-mount, inground or above-ground501None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S166TTop-mount1002None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S180TTop-mount1503None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S210TTop-mount2004None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S220TTop-mount2505None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S244TTop-mount3006None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S270TTop-mount3507None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S310T2Top-mount50010None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Hayward ProSeries S360T2Top-mount70014None10 in. minimum0.45 to 0.55 mmHayward ProSeries manual IS210TS p. 11
Pentair Sand Dollar SD60Top-mount2505NoneNameplate weightNo. 20, 0.45 to 0.55 mmPentair 2025-2026 catalog p. 63
Pentair Sand Dollar SD70Top-mount3006NoneNameplate weightNo. 20, 0.45 to 0.55 mmPentair 2025-2026 catalog p. 63
Pentair Sand Dollar SD80Top-mount3507NoneNameplate weightNo. 20, 0.45 to 0.55 mmPentair 2025-2026 catalog p. 63
Pentair Triton TR40Side-mount1753.5None8.25 in. free boardNo. 20, 0.44 to 0.55 mmPentair Triton guide (2025) Table 2
Pentair Triton TR60Side-mount3256.5None10.5 in. free boardNo. 20, 0.44 to 0.55 mmPentair Triton guide (2025) Table 2
Pentair Triton TR100Side-mount60012None11.25 in. free boardNo. 20, 0.44 to 0.55 mmPentair Triton guide (2025) Table 2
Pentair Triton TR140Side-mount92518.5None13.5 in. free boardNo. 20, 0.44 to 0.55 mmPentair Triton guide (2025) Table 2
Jandy JS60-SMSide-mount3006Or 75 lb pea gravel + 225 lb sand11.5 in. freeboard#20, 0.016 to 0.021 in.Jandy JS manual Table 2
Jandy JS100-SMSide-mount60012Or 175 lb pea gravel + 425 lb sand11.25 in. freeboard#20, 0.016 to 0.021 in.Jandy JS manual Table 2
Intex SF80110-2Above-ground pump combo501None (or 35 lb glass)Not listedNo. 20, 0.45 to 0.85 mm, or glassIntex SF owner manual p. 8
Intex SF70110-2Above-ground pump combo771.54None (or 55 lb glass)Not listedNo. 20, 0.45 to 0.85 mm, or glassIntex SF owner manual p. 8
Intex SF60110-2Above-ground pump combo1212.42None (or 84 lb glass)Not listedNo. 20, 0.45 to 0.85 mm, or glassIntex SF owner manual p. 8

Sources: Hayward ProSeries manual IS210TS, p. 11; Pentair 2025-2026 catalog, p. 63; Pentair Sand Dollar guide; Pentair Triton guide (2025), Table 2; Jandy JS manual, Table 2; Intex SF owner manual. Bag counts are PC&S arithmetic. Accessed November 3, 2026. Download CSV

Pool filter sand by model: pounds of No. 20 silica on 21 maker labelsFrom 50 lb (Hayward S144T, Intex SF80110-2) to 925 lb (Pentair TR140)
Pool filter sand by model: pounds of No. 20 silica on 21 maker labelsBar chart of sand weight by filter model, Pentair TR140 925 lb at the top, Hayward S144T and Intex SF80110-2 50 lb at the bottom.Pentair Triton TR140: 925Pentair Triton TR140925Hayward ProSeries S360T2: 700Hayward ProSeries S360T2700Pentair Triton TR100: 600Pentair Triton TR100600Jandy JS100-SM: 600Jandy JS100-SM600Hayward ProSeries S310T2: 500Hayward ProSeries S310T2500Hayward ProSeries S270T: 350Hayward ProSeries S270T350Pentair Sand Dollar SD80: 350Pentair Sand Dollar SD80350Pentair Triton TR60: 325Pentair Triton TR60325Hayward ProSeries S244T: 300Hayward ProSeries S244T300Pentair Sand Dollar SD70: 300Pentair Sand Dollar SD70300Jandy JS60-SM: 300Jandy JS60-SM300Hayward ProSeries S220T: 250Hayward ProSeries S220T250Pentair Sand Dollar SD60: 250Pentair Sand Dollar SD60250Hayward ProSeries S210T: 200Hayward ProSeries S210T200Pentair Triton TR40: 175Pentair Triton TR40175Hayward ProSeries S180T: 150Hayward ProSeries S180T150Intex SF60110-2: 121Intex SF60110-2121Hayward ProSeries S166T: 100Hayward ProSeries S166T100Intex SF70110-2: 77Intex SF70110-277Hayward ProSeries S144T: 50Hayward ProSeries S144T50Intex SF80110-2: 50Intex SF80110-250

Source: Hayward, Pentair, Jandy and Intex manuals and the Pentair 2025-2026 catalog, accessed Nov 3, 2026. Download chart data (CSV)

Same tank width, different weights: a Pentair TR60 takes 325 lb where a Hayward S244T takes 300, and Pentair’s Triton guide calls the free board, the space between sand and tank top, the most important variable because sand density varies. Jandy says the same and treats its weights as approximate. If the label and the bag count disagree, stop at the free board line.

Does a pool filter need gravel under the sand? Only if the manual lists it. Hayward, Pentair and Intex specify sand alone. Jandy’s JS manual allows 75 lb of 1/8 to 1/4 inch pea gravel under 225 lb of sand in a JS60-SM, or 175 lb under 425 lb in a JS100-SM, with the gravel about 1 inch above the laterals.

How often should you change the sand in a pool filter?

Every 3 to 6 years by EPA’s WaterSense figure, or about 5 years by Hayward’s, but the filter tells you sooner. Change it when pressure stays 4 to 6 psi above the clean start right after a backwash and a chemical clean fails (Pentair), or when the bed is crusted. Sand in the pool points to a broken lateral, not old sand.

When to change pool filter sand: maker intervals, code rule and the symptoms that trigger it
Signal or ruleWhat it meansSource
3 to 6 years of useEPA's published sand media lifeEPA WaterSense (Sept 2022)
About 5 years before the first changeHayward's rule of thumbHayward (May 2023)
1.5 years year-round, 3 years seasonalInterval from a company that sells sandHTH Pool Filter Sand
Yearly inspection of sand depth and cleanlinessPublic-pool rule; replace when needed2024 MAHC 5.7.2.2.5
Pressure stays 4 to 6 psi over the clean start right after a backwashChemically clean the bed first; change if that failsPentair Sand Dollar guide
Crust or cake on top of the bedRemove the top 1 inch of sandHayward ProSeries manual
Sand on the pool floorBroken lateral or too high a backwash rate: open the tankPentair Sand Dollar guide; Jandy JS manual

Sources: EPA WaterSense (Sept 2022); Hayward (May 22, 2023); HTH Pool Filter Sand; 2024 MAHC 5.7.2.2.5; Pentair Sand Dollar guide; Hayward ProSeries manual; Jandy JS manual. Download CSV

Read the gauge before buying sand. When pressure climbs 8 to 10 psi over the clean reading, a backwash usually fixes it, and our guide on how to backwash a pool filter has the minutes for each maker. A short-cycling bed with a crust on top may need only its top 1 inch removed, the fix Hayward’s troubleshooting table gives.

What several sand-change guides say vs what the filter manuals and primary sources say
What a guide saysWhat the manual or primary source saysSources
Most sand filters layer coarse, medium and fine sand (SwimmingPool.com)Hayward, Pentair and Intex specify one grade of No. 20 silica; only Jandy's JS manual offers an optional pea gravel layer under the sandHayward; Pentair; Intex; Jandy
Change sand every 1 to 3 years (SwimmingPool.com)EPA puts sand life at 3 to 6 years; Hayward about 5 years; the MAHC says inspect yearly and replace when neededEPA WaterSense; Hayward; 2024 MAHC
Every 5 to 7 years, or 5 to 8 (Inyo Pools)Within EPA's 3 to 6 year range only at the low end; inspect yearly instead of trusting a calendarEPA WaterSense; 2024 MAHC
Any bag sold as pool filter sand fitsQuikrete's pool filter sand runs #20 to 40 (0.425 to 0.85 mm); Hayward and Pentair specify 0.45 to 0.55 mmQuikrete data sheet; Hayward; Pentair
Pour sand into a dry tank, then add water (Intex manual)Hayward and Pentair say fill the tank about half with water first to cushion the laterals; follow your own filter's manualIntex; Hayward; Pentair

Sources: SwimmingPool.com; Inyo Pools; Mr Pool Man; Hayward; Pentair; Intex; Jandy; EPA WaterSense; 2024 MAHC; Quikrete data sheet. Accessed November 3, 2026. Download CSV

How to change sand in a pool filter, step by step

Shut the pump off, drain the tank, take off the valve or closure, remove the old sand, check every lateral, cap the standpipe, fill the tank about half with water, pour the label weight of No. 20 silica, refit the valve and backwash at least 2 minutes. The steps follow the Hayward ProSeries manual, with Pentair and Jandy differences noted.

  1. Power off and drainTurn the pump off at the breaker, open the air relief valve and pull the drain cap at the tank base. Pentair’s Triton guide flushes the tank out through its sand drain with a garden hose.
  2. Take off the valve or closureTop-mount filters (Hayward ProSeries, Pentair Sand Dollar): loosen the flange clamp and lift the multiport valve straight up. Side-mount filters (Triton, Jandy JS): unscrew the top closure.
  3. Remove the old sand dampScoop it out or use a wet vacuum; Pentair sells a Sand Vacuum, P/N 542090. Keep the sand wet and wear an N-95: the Tech-Mix SDS rates its dust a Category 1A carcinogen.
  4. Inspect the lateralsLook for cracked or loose fingers. Pentair and Jandy both say a broken lateral sends sand into the pool. On a top-mount, the laterals must point down (Hayward); on a Jandy JS, they sit horizontal and screwed into the hub.
  5. Cap the standpipeFit the sand shield (Hayward), sand guide (Pentair) or the cardboard deflector Jandy ships with the JS100-SM, and keep the pipe centered in the opening.
  6. Fill about half with waterHayward and Pentair: tank about 1/2 full so the falling sand does not crack the laterals. Jandy JS: water about 4 inches above the laterals. Intex reverses it: sand halfway first, then water.
  7. Add gravel only if listedJandy JS only: pour 75 lb (JS60-SM) or 175 lb (JS100-SM) of 1/8 to 1/4 inch pea gravel slowly and level it about 1 inch over the laterals.
  8. Pour the label weight slowlyNo. 20 silica, 0.45 to 0.55 mm, uniformity coefficient 1.75 or less. Stop at the free board line: 10 inches minimum on a ProSeries, 8.25 to 13.5 inches on a Triton.
  9. Clean the rim and refitRemove the shield, wash sand off the tank threads and rim, check and lubricate the valve or closure O-ring, then reinstall and tighten.
  10. Backwash the new sandValve on BACKWASH, prime and start the pump; once waste flow is steady run at least 2 minutes (Hayward). RINSE 1/2 to 1 minute, then FILTER, and record the new clean pressure.
Cutaway of a top-mount sand filter during a sand change: standpipe capped, tank about half full of water, laterals at the bottom, No. 20 silica at 0.45 to 0.55 mm and at least 10 inches of free space under the valve. Drawn by PC&S from the Hayward ProSeries, Pentair and Jandy manuals, November 2026.
Cutaway of a top-mount sand filter during a sand change: standpipe capped, tank about half full of water, laterals at the bottom, No. 20 silica at 0.45 to 0.55 mm and at least 10 inches of free space under the valve. Drawn by PC&S from the Hayward ProSeries, Pentair and Jandy manuals, November 2026.

Lift with care: a 300 lb charge is six 50 lb bags, and Pentair warns that a filled filter weighs several hundred pounds. Take automatic cleaners out first, and leave the vacuum hose off until the startup backwash is done; our guide on how to vacuum a pool covers the FILTER and WASTE settings afterwards.

What kind of pool filter sand should you buy?

No. 20 silica sand graded 0.45 to 0.55 mm with a uniformity coefficient of 1.75 or less, the spec in the Hayward and Pentair manuals; Jandy writes it as 0.016 to 0.021 inch. Not every bag labeled pool filter sand matches: Quikrete’s data sheet gives #20 to 40 sieve, 0.425 to 0.85 mm, a grade Intex accepts but Hayward does not list.

Jandy's sidemount manual sets sand weight, an optional pea gravel layer and #20 silica at 0.016 to 0.021 inch for the JS60-SM and JS100-SM (Jandy JS manual H0282300, Table 2, accessed November 3, 2026). Red boxes added by PC&S.
Jandy’s sidemount manual sets sand weight, an optional pea gravel layer and #20 silica at 0.016 to 0.021 inch for the JS60-SM and JS100-SM (Jandy JS manual H0282300, Table 2, accessed November 3, 2026). Red boxes added by PC&S.

Play sand, masonry sand and beach sand are not on any label we read. Too fine a grade clogs the lateral slots: Jandy’s troubleshooting table names sand that is too fine as a cause of clogged laterals and says to clean every slot before refilling. Check the bag’s sieve or millimeter figure against your manual, 0.45 to 0.55 mm for Hayward and Pentair, before you carry it home.

Can you use glass or zeolite instead of sand?

Yes, where the filter maker lists it, and by weight less goes in. Intex lists glass at 35, 55 and 84 lb where silica would be 50, 77 and 121 lb, about 0.70 of the weight. Jandy’s JS manual lists Zeobrite zeolite at 150 lb over gravel in place of 225 lb of sand, about 0.67. EPA gives glass a 7 to 15 year life against 3 to 6 for sand.

Glass and zeolite equivalents for pool filter sand, from maker data
MediumMaker dataWeight vs No. 20 silica sandSource
Glass sand (Intex SF series)35 lb vs 50; 55 vs 77; 84 vs 1210.69 to 0.71Intex owner manual
Zeobrite zeolite (Jandy JS60-SM)150 lb over 75 lb gravel vs 225 lb sand over the same gravel0.67Jandy JS manual Table 3
Zeobrite zeolite (Jandy JS100-SM)270 lb over 175 lb gravel vs 425 lb sand0.64Jandy JS manual Table 3
Vitroclean glass (seller figure)40 lb replaces 50 lb of sand0.80Dave's Pool Store
Pea gravel layer (Jandy, optional)1/8 to 1/4 in., about 1 in. above lateralsReplaces 75 to 175 lb of sandJandy JS manual Table 2

Sources: Intex owner manual; Jandy JS manual Tables 2 and 3; Dave's Pool Store (seller figure). Ratios are PC&S arithmetic. Download CSV

Hayward’s ProSeries manual names only 0.45 to 0.55 mm silica, and Pentair’s guides only No. 20 silica, so ask the maker in writing before switching a filter that does not list glass, because warranty terms follow the manual. Sand, glass, cartridge and DE are compared on micron rating, media life and 10-year cost in our pool filter types guide.

How much does it cost to change pool filter sand?

About $84 to $86 in sand for a 300 lb Hayward S244T at October 27, 2026 prices, $172 to $175 in glass, and $403 to $459 for two pool companies’ published sand-change prices. Labor is most of a pro bill: Gold Conch charges $139 plus $1 a pound, Swim N Pools $350 plus $12.99 a bag.

Worked example: cost to change the media in a Hayward S244T (300 lb), DIY vs pro
Route for a Hayward S244T (300 lb)ArithmeticTotalSource
DIY, No. 20 silica sand6 bags x $13.95 (Dave's) to $14.35 (Waterline)$83.70 to $86.10Retailer listings, Oct 27, 2026
DIY, glass (recycled, Intex 0.70 ratio)210 lb = 4.2 bags, round to 5 x $35.09 (PoolBlu)$175.45Intex ratio; PoolBlu, Oct 27, 2026
DIY, Vitroclean glass (seller chart)4 bags x $42.95, pebble layer not priced$171.80 plus pebbleDave's Pool Store
Pro: Gold Conch$139 + 300 lb x $1, + $20 to haul old sand$439 to $459Gold Conch page, Nov 3, 2026
Pro: Swim N Pools (in season)$350 + 6 x $12.99$427.94Swim N Pools page, Nov 3, 2026
Pro: Swim N Pools (November to March)$325 + 6 x $12.99$402.94Swim N Pools page, Nov 3, 2026
Replace the whole filter instead2026 median list price, 22 to 30 in. inground sand filter$689PC&S pool equipment price index

Sources: Dave's Pool Store sand; Waterline Technologies; PoolBlu; Dave's Pool Store glass (all October 27, 2026); Gold Conch; Swim N Pools (November 3, 2026); PC&S pool equipment price index. Arithmetic by PC&S. Download CSV

Cost to change the sand in a Hayward S244T (300 lb): DIY vs pro, 2026Media prices checked Oct 27, 2026; pool company prices Nov 3, 2026; PC&S arithmetic
Cost to change the sand in a Hayward S244T (300 lb): DIY vs pro, 2026Range chart: DIY sand $83.70 to $86.10, DIY glass $171.80 to $175.45, pro sand change $402.94 to $459, new filter $689.$0$200$400$600$800DIY silica sand: $83.7 to $86.1DIY silica sandDIY glass media: $172 to $175DIY glass mediaPro sand change: $403 to $459Pro sand changeNew filter (median list): $689 to $689New filter (median list)

Source: Dave's Pool Store, Waterline, PoolBlu, Gold Conch, Swim N Pools, PC&S pool equipment price index. Download chart data (CSV)

Ask what a quote includes. Gold Conch leaves the old sand on site unless you pay $20 to haul it, and Swim N Pools bills sand separately and inspects the laterals, asking for the make and model first. Routine filter visits are priced in our pool service cost survey.

Rather have a pro change the sand?

What do you do with old pool filter sand?

Keep it out of drains and gutters. The County of San Diego says filter waste, including sand, must never go to the storm drain, and Mesa, Arizona bars sand and sediment from the sewer cleanout. Bag it damp, since it is crystalline silica, and ask your waste hauler about 50 to 925 lb of wet sand before the change.

Old filter sand comes out wet and heavy; keeping it damp also keeps silica dust down, as the sand's safety data sheet advises.
Old filter sand comes out wet and heavy; keeping it damp also keeps silica dust down, as the sand’s safety data sheet advises.

Both rules are on local government pages: the County of San Diego bulletin (June 2026) names filtrate materials such as DE and sand, and the City of Mesa lists soil, sediment, sand and debris among what may not enter a cleanout. A wet 300 lb charge fills about six heavy bags, so plan the weight before you dig.

Backwash, clean, re-sand or replace: which fits?

Match the symptom to a row. A backwash that restores the clean reading means the sand is fine; pressure 4 to 6 psi high right after a backwash means a chemical clean; sand in the pool means laterals; 3 to 6 year old sand that no longer clears means a sand change. A cracked tank means a new filter, $689 median list in 2026.

Key numbers for changing pool filter sand, with the source of each
Key numberValueSource
Sand grade for Hayward, Pentair and JandyNo. 20 silica, 0.45 to 0.55 mm (Triton 0.44 to 0.55)Maker manuals
Uniformity coefficient1.75 or lessPentair; Intex
Water in the tank before pouringAbout half fullHayward; Pentair Sand Dollar and Triton
Space above the sand10 in. minimum (Hayward); 8.25 to 13.5 in. (Triton)Hayward; Pentair
First backwash on new sand2 minutes or more after steady flow, then rinse 1/2 to 1 minuteHayward
Sand life3 to 6 years (EPA); about 5 years (Hayward)EPA WaterSense; Hayward
Glass in place of sandAbout 0.70 of the sand weightIntex manual
Sand for a Hayward S244T300 lb, 6 bagsHayward manual
DIY sand cost for an S244T$83.70 to $86.10PC&S arithmetic, October 27, 2026 prices

Sources: Hayward; Pentair Sand Dollar; Pentair Triton; Intex; EPA WaterSense; Hayward blog; Dave's Pool Store; Waterline. Download CSV

Decision table: backwash, chemically clean, change the sand or replace the filter
If your situation isDo thisSource
Pressure high, backwash brings it back to the clean readingKeep backwashing at the 8 to 10 psi trigger; the sand is fineHayward ProSeries
Pressure stays 4 to 6 psi over the clean start right after a backwashChemically clean the sand bed overnight first; change sand only if that failsPentair Sand Dollar guide
Sand on the pool floorOpen the tank and inspect laterals before buying sand; replace any cracked lateralPentair; Jandy
Sand 3 to 6 years old and water dulls between backwashesChange the sand; load the label weightEPA WaterSense; maker manuals
You want longer media lifeGlass at about 0.70 of the sand weight (Intex) and 7 to 15 years (EPA); ask your filter maker in writing about warrantyIntex; EPA WaterSense
Jandy JS filter 30 in. or larger with zeoliteLay the pea gravel bed first, then Zeobrite to the Table 3 weightJandy JS manual
Tank, valve body or standpipe crackedCall a pro or price a new filter ($689 median list for a 22 to 30 in. sand filter in 2026)PC&S pool equipment price index
Sand frozen in the tankWait for a thaw; one Virginia company will not do sand changes in January and FebruarySwim N Pools

Sources: Hayward; Pentair Sand Dollar; Jandy; EPA WaterSense; Intex; Swim N Pools; PC&S pool equipment price index. Download CSV

Cloudy water after new sand is normal for a day if the startup backwash was short; if it lasts, test the chemistry against our cloudy pool water guide. For the rest of the yearly routine, from the 8 to 10 psi backwash trigger to cartridge soaks, see our guides on how to clean a pool filter and how to maintain a pool.

How we compiled this

In November 2026 we read 24 documents: 5 filter manuals (Hayward ProSeries, Pentair Sand Dollar and Triton, Jandy JS, Intex SF), the Pentair 2025-2026 catalog, a Hayward article, EPA WaterSense, the 2024 MAHC, a pool sand safety data sheet and a Quikrete data sheet, OSHA and NIOSH pages, 2 local government rules, 4 media price listings, 2 pool company price pages, the PC&S price index and 3 consumer guides used only for the comparison table. Bestway Flowclear manuals were behind bot checks and are not included. Bag counts, ratios and costs are PC&S arithmetic; we changed no sand ourselves.

Frequently Asked Questions

How much sand do I need for my pool filter?

The weight printed on your filter’s label. Hayward ProSeries filters take 50 lb (S144T) to 700 lb (S360T2), Pentair Triton 175 to 925 lb, Pentair Sand Dollar 250 to 350 lb, Jandy JS 300 or 600 lb and Intex sand filter pumps 50 to 121 lb. Divide by 50 for the number of bags: a Hayward S244T needs 300 lb, six bags.

How often should you change the sand in a pool filter?

Every 3 to 6 years by EPA’s WaterSense figure, or about 5 years by Hayward’s. Change sooner if pressure stays 4 to 6 psi above the clean reading right after a backwash and a chemical clean does not fix it (Pentair). The 2024 MAHC has public pools inspect sand depth and cleanliness at least once a year.

What kind of sand goes in a pool filter?

No. 20 silica sand graded 0.45 to 0.55 mm with a uniformity coefficient of 1.75 or less, per Hayward and Pentair; Jandy writes it as 0.016 to 0.021 inch. Some bags sold as pool filter sand run wider, 0.425 to 0.85 mm on Quikrete’s data sheet, which Intex accepts but Hayward’s manual does not list. Play sand is not on any label.

Do you fill a sand filter with water before adding sand?

Yes, on most filters. Hayward and Pentair both say fill the tank about half with water so the falling sand does not crack the laterals, and Jandy fills to about 4 inches above them. Intex is the exception: its manual pours sand halfway first, then adds water to cushion the rest. Follow the manual for your filter.

Is glass better than sand in a pool filter?

It lasts longer and filters finer on EPA’s figures: 7 to 15 years and 5 microns for glass against 3 to 6 years and 20 to 40 microns for sand. It costs more, about $172 to $175 for a 300 lb Hayward S244T charge against $84 to $86 for sand in October 2026. Use it only where your filter maker lists it.

How much does it cost to change pool filter sand?

For a 300 lb Hayward S244T, about $84 to $86 in No. 20 silica sand at October 27, 2026 prices if you do it yourself. Two pool companies’ published prices work out to $402.94 to $459: Gold Conch charges $139 plus $1 a pound, and Swim N Pools $350 ($325 off season) plus $12.99 per 50 lb bag.

Sources

  1. Hayward. Pro Series High-Rate Sand Filters owner's manual IS210TS Rev A. Accessed 2026-11-03.
  2. Hayward. What are the Differences Between Filter Types? (May 22, 2023). Accessed 2026-10-26.
  3. Pentair. Sand Dollar and Cristal-Flo II Top Mount Sand Filter Installation and User's Guide. Accessed 2026-11-03.
  4. Pentair. Pentair Pool 2025-2026 Product Catalog, p. 63. Accessed 2026-11-03.
  5. Pentair. Triton Side Mount Sand Filter Installation and User's Guide (2025). Accessed 2026-11-03.
  6. Jandy (Fluidra). Sidemount Composite Sand Filters (JS) Installation and Operation Manual. Accessed 2026-11-03.
  7. Intex, hosted by Home Depot. Krystal Clear Sand Filter Pump owner's manual (06/13/2019). Accessed 2026-11-03.
  8. U.S. EPA. WaterSense: Making a Splash, Pool Water Efficiency (Sept 2022). Accessed 2026-10-27.
  9. HTH. HTH Pool Care Pool Filter Sand. Accessed 2026-10-26.
  10. CDC. 2024 Model Aquatic Health Code, Code Language. Accessed 2026-10-26.
  11. TCC Materials, hosted by Zoro. Tech-Mix Pool Filter Sand Safety Data Sheet (Aug 2018). Accessed 2026-11-03.
  12. Quikrete. QUIKRETE Pool Filter Sand data sheet. Accessed 2026-11-03.
  13. OSHA. 29 CFR 1910.1053 Respirable crystalline silica. Accessed 2026-10-27.
  14. CDC NIOSH. Silica and Worker Health. Accessed 2026-11-03.
  15. County of San Diego. Pool, Spa, and Fountain Pollution Prevention Practices (June 5, 2026). Accessed 2026-10-26.
  16. City of Mesa. Drain or Backwash Your Pool or Spa. Accessed 2026-10-26.
  17. Dave's Pool Store. Sand filter media 50 lb. Accessed 2026-10-27.
  18. Waterline Technologies. Swimming pool #20 filtration grade silica sand 50 lb. Accessed 2026-10-27.
  19. PoolBlu. Glass filter media FG50. Accessed 2026-10-27.
  20. Dave's Pool Store. Glass filter media 50 lb (Vitroclean). Accessed 2026-10-27.
  21. Gold Conch. Sand Changes + Other Filter Media Changes. Accessed 2026-11-03.
  22. Swim N Pools. Swimming Pool Filter Sand Change. Accessed 2026-11-03.
  23. PC&S research. Pool Equipment Prices 2026. Accessed 2026-10-26.
  24. SwimmingPool.com. How to Change Sand in Your Pool Filter (claims compared only). Accessed 2026-11-03.
  25. Inyo Pools. How To Change Sand in a Pool Sand Filter (claims compared only). Accessed 2026-11-03.
  26. Mr Pool Man. How to change pool filter sand (claims compared only). Accessed 2026-11-03.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.