Skip to content
Clear backyard pool on a bright morning
Pool care: salt chlorine generators

How to Convert Pool to Salt Water: Cell Sizing, Steps and Total Cost

How to convert pool to salt water: balance the water, install a cell rated above your gallons, add 8.34 lb of salt per 100 ppm per 10,000 gallons, then start the generator. Budget $1,763 to $3,146 (2026).

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓13 models comparedRated gallons, chlorine output and dated prices from maker manuals and sellers.
  • ✓Manual-based stepsSalt, stabilizer and plaster rules quoted from Hayward, Pentair, Jandy and CircuPool.
  • ✓Real cost buildSystem, salt and install for a 20,000 gallon pool, November 2026.
Quick answer
Test and balance the water, stop tablets, plumb a salt chlorine generator after the filter and heater, add salt to the manual’s 3,000 to 3,600 ppm with the unit off, wait 24 to 48 hours, then start it. A 20,000 gallon conversion costs $1,763 to $3,146 (November 2026 prices).
8.34 lb per 100 ppm per 10,000 gal
Salt dose
$1,763 to $3,146
20,000 gal conversion
At least 1 month
Wait after new plaster

Key takeaways

  • A salt water pool is still a chlorine pool: a salt chlorine generator turns dissolved salt into chlorine, per Mahoning County Public Health, so you keep testing free chlorine, pH and stabilizer.
  • Salt dose is 8.34 lb per 100 ppm per 10,000 gallons: a 20,000 gallon pool needs 534 lb, 14 bags of 40 lb, to reach 3,200 ppm, or $167.86 at Leslie‘s June 2026 price.
  • Rated pool size is not output: the Jandy AquaPure 1400 makes 1.25 lb of chlorine a day for 40,000 gallons, while the CircuPool CORE35 makes 1.4 lb for 35,000.
  • Converting a 20,000 gallon pool costs $1,763 with a CircuPool CORE35 installed DIY to $3,146 with a Jandy AquaPure 1400 and a $500 install (PC&S arithmetic from November 2026 prices).
  • Pentair’s IntelliChlor Plus/LT guide says not to use trichlor or dichlor with a salt chlorine generator, and to wait at least one month after new plaster before adding salt.
  • In a year-round pool at mid demand, salt costs $1,700 less than 12.5% liquid chlorine over 10 years, per our saltwater pool vs chlorine study; in a 4-month season it costs more than tablets.

Can you turn a regular pool into a salt water pool?

Yes. Any chlorine pool can be converted by adding a salt chlorine generator to the return line and dissolving pool salt to about 3,000 to 3,600 ppm, depending on the model. The cell makes chlorine from that salt, so you still hold CDC’s free chlorine target of at least 2 ppm with stabilizer, and you still lower pH with acid.

What changes and what stays the same when you convert a pool to salt water
ItemBefore (tablet or liquid chlorine pool)After conversion (salt chlorine generator)Source
SanitizerChlorine added as tablets, liquid or granulesChlorine made in the cell from dissolved saltMahoning County Public Health
Free chlorine to holdAt least 1 ppm; at least 2 ppm with stabilizerSame CDC targetsCDC
Salt in the waterNone addedAbout 3,000 to 3,600 ppm, by model; seawater is about 35,000 ppmChlorinator manuals; USGS
Stabilizer (cyanuric acid)Arrives with trichlor tablets and builds upAdded separately to the manual's target; stops climbingPentair; PC&S research
pHDrifts with the product usedRises as chlorine is made; muriatic acid neededMahoning County Public Health
TabletsFeeder or floaterPentair: do not use trichlor or dichlor with the generatorPentair IntelliChlor Plus/LT guide
TestingChlorine and pHChlorine and pH, plus salt at least weekly (public pools)2024 MAHC
Wear partTablet feederSalt cell, replaced about every 5 years on averageMahoning County Public Health

Sources: Mahoning County Public Health, CDC, USGS, Pentair, 2024 MAHC. Download CSV

Pool salt at 3,200 ppm is about 9% of seawater’s 35,000 ppm (USGS). Vinyl, fiberglass and plaster pools can all convert, with two checks: Pentair asks owners of new vinyl liner pools to contact the liner maker before adding salt, and River Pools warns that metal pool walls and automatic cover tracks can corrode (River Pools, 2021). Above-ground pools use smaller units; check the pool maker’s salt rule first.

Which salt chlorine generator size does your pool need?

Pick a model rated above your gallons, then compare chlorine output, because ratings are not equal. Across 10 models with published output, chlorine per 10,000 rated gallons runs from 0.31 lb a day (Jandy AquaPure 1400) to 0.60 lb (CircuPool CORE15). A bigger cell runs fewer hours a day, which stretches the hours a cell lasts.

Salt chlorine generator models compared: rated gallons, chlorine output, dated prices and warranty (13 models)
ModelRated pool size (gal)Chlorine at 100% for 24 h (lb/day)lb/day per 10,000 rated galSystem price (seller, date)Replacement cell (seller, date)WarrantySource
Hayward AquaRite W3AQR3 (T-CELL-3)15,000Not stated in manual readNot stated$1,799 (Leslie's Jun 2026; INYO Nov 8, 2026)Not priced here3 yr residentialHayward manual; Leslie's; INYO
Hayward AquaRite W3AQR9 (T-CELL-9)25,000Not stated in manual readNot stated$1,999 (Leslie's, Jun 2026)$899 W3T-CELL-9 (Leslie's, Jun 2026)3 yr residentialHayward manual; Leslie's
Hayward AquaRite W3AQR15 (T-CELL-15)40,000Not stated in manual readNot stated$2,199 (Leslie's, Jun 2026)$1,099 W3T-CELL-15 (Leslie's, Sep 2026)3 yr residentialHayward manual; Leslie's
Hayward AquaRite S3, TCELLS325 cell25,0000.980.39Not sold online at INYO (Nov 2026)Not priced online3 yr residentialHayward S3 manual 092769 Rev D
Hayward AquaRite S3, TCELLS340 cell40,0001.470.37Not sold online at INYO (Nov 2026)Not priced online3 yr residentialHayward S3 manual
Pentair IntelliChlor LT2525,0000.90.36Cell $1,209.99; power supply extra (INYO, Nov 8, 2026)$1,209.99 (INYO)2 yr or 6,000 hPentair Plus/LT guide; INYO
Pentair IntelliChlor PLUS4040,0001.40.35Cell $1,819 (INYO, Nov 8, 2026); power center extra$1,819 (INYO; Leslie's Sep 2026)3 yr or 10,000 hPentair Plus/LT guide; INYO
Pentair IntelliChlor PLUS6060,0002.00.33Not priced hereNot priced here3 yr or 10,000 hPentair Plus/LT guide
Jandy AquaPure 70012,0000.6250.52Not priced hereNot priced hereNot stated in manualJandy H0325600 Rev F
Jandy AquaPure 140040,0001.250.31$2,477.98: APUREM $836.99 + PLC1400 cell $1,640.99 (INYO, Nov 8, 2026)$1,640.99 (INYO)Not stated in manualJandy manual; INYO
CircuPool CORE1515,0000.90.60$1,495 (CircuPool, Nov 8, 2026)$620 (CircuPool)Parts free yr 1 to 2, prorated to yr 8CircuPool manual and site
CircuPool CORE3535,0001.40.40$1,595 (CircuPool, Nov 8, 2026)$737 (CircuPool)Parts free yr 1 to 2, prorated to yr 8CircuPool manual and site
CircuPool CORE5555,0002.00.36$1,975 (CircuPool, Nov 8, 2026)$862 (CircuPool)Parts free yr 1 to 2, prorated to yr 8CircuPool manual and site

Sources: Hayward AquaRite S3 manual, Hayward Aqua Rite manual, Pentair IntelliChlor Plus/LT guide, Jandy AquaPure manual, CircuPool CORE manual, CircuPool, INYO Pools, Leslie‘s; prices read June to November 2026. Download CSV

Salt cell chlorine output per 10,000 rated gallons, 10 models, 2026 manualsPounds of chlorine per day at 100% output over 24 hours, divided by rated pool size in 10,000 gallon units
Salt cell chlorine output per 10,000 rated gallons, 10 models, 2026 manualsBar chart: the CircuPool CORE15 makes 0.60 lb a day per 10,000 rated gallons and the Jandy AquaPure 700 0.52, while the Jandy AquaPure 1400 makes 0.31 and the Pentair PLUS60 0.33.CircuPool CORE15: 0.6CircuPool CORE150.6Jandy AquaPure 700: 0.52Jandy AquaPure 7000.52CircuPool CORE35: 0.4CircuPool CORE350.4Hayward S3 TCELLS325: 0.39Hayward S3 TCELLS3250.39Hayward S3 TCELLS340: 0.37Hayward S3 TCELLS3400.37Pentair IntelliChlor LT25: 0.36Pentair IntelliChlor LT250.36CircuPool CORE55: 0.36CircuPool CORE550.36Pentair IntelliChlor PLUS40: 0.35Pentair IntelliChlor PLUS400.35Pentair IntelliChlor PLUS60: 0.33Pentair IntelliChlor PLUS600.33Jandy AquaPure 1400: 0.31Jandy AquaPure 14000.31

The same rated pool size can mean almost twice the chlorine output from one maker to another. Pentair's LT25 table lists 30,000 gallons; INYO lists it at 25,000; we use 25,000.

Source: Hayward AquaRite S3 manual 092769 Rev D; Pentair IntelliChlor Plus/LT guide 523854 Rev B; Jandy AquaPure H0325600 Rev F; CircuPool CORE site; PC&S arithmetic. Download chart data (CSV)

To see what output means in hours, take a 20,000 gallon year-round pool. Our saltwater pool vs chlorine model puts mid chlorine demand at 82.1 lb of available chlorine a year, or 0.225 lb a day, and high demand at 0.360 lb. A 1.4 lb/day cell covers mid demand in 3.9 hours of run time; a 0.625 lb/day Jandy AquaPure 700 needs 8.6 hours.

Worked arithmetic: cell hours a day and years to 10,000 cell hours for a 20,000 gallon year-round pool
Model (lb/day at 100%)Cell hours a day, mid demand (0.225 lb/day)Cell hours a day, high demand (0.360 lb/day)Years to 10,000 cell hours, year-round, mid demand
Jandy AquaPure 700 (0.625)8.613.83.2
Pentair LT25 (0.9)6.09.64.6
CircuPool CORE15 (0.9)6.09.64.6
Hayward TCELLS325 (0.98)5.58.85.0
Jandy AquaPure 1400 (1.25)4.36.96.3
CircuPool CORE35 or Pentair PLUS40 (1.4)3.96.27.1
Hayward TCELLS340 (1.47)3.75.97.5
CircuPool CORE55 or Pentair PLUS60 (2.0)2.74.310.2

Demand from the PC&S saltwater vs chlorine model; output from maker manuals; 10,000 hour rating from the Pentair IntelliChlor guide, applied to all models as a planning yardstick. Download CSV

Pentair designs its IntelliChlor cells for about 10,000 hours, roughly 5 years of average use (Pentair). At mid demand a 1.4 lb/day cell would take 7.1 years to log 10,000 hours in a year-round pool, against 3.2 years for a 0.625 lb/day cell. Jandy also tells year-round owners in hot states to up-size, since its 1400 model is rated for up to 40,000 gallons (Jandy).

How to convert pool to salt water, step by step

Balance the water, stop tablets, install the cell on the return line after the filter and heater, add salt to the manual’s target with the generator off, let it dissolve for 24 to 48 hours, then start the generator and test. River Pools and INYO Pools both say you do not need to drain unless stabilizer is too high.

  1. Measure gallons and testGet gallons from our pool volume calculator, then test free chlorine, pH, alkalinity, calcium and stabilizer. Pentair asks for calcium hardness of 200 to 400 ppm.
  2. Fix stabilizer before saltMost manuals want 30 to 50 ppm cyanuric acid (Pentair IC, CircuPool, Hayward AquaRite 900); Jandy wants 50 to 75. If yours is higher, partially drain first.
  3. Stop the tabletsRemove tablet floaters and feeders: Pentair says not to use trichlor or dichlor with a salt chlorine generator.
  4. Wait out new plasterPentair asks for at least 1 month after new or resurfaced plaster, Jandy and CircuPool 30 days, Hayward S3 10 to 14 days.
  5. Seal natural stoneSeal stone coping and decks with a salt-rated sealer before any salt goes in (Hayward manual; LATICRETE DS-288-1026).
  6. Install the cell and bond itPlumb the cell in the return line after the filter and heater (Pentair, Hayward), and bond it with solid copper no smaller than 8 AWG (Pentair).
  7. Add salt with the generator offDose 8.34 lb per 100 ppm per 10,000 gallons: 534 lb (14 bags of 40 lb) takes 20,000 gallons to 3,200 ppm. Broadcast it around the pool, not through the skimmer (Jandy).
  8. Let it dissolveRun the pump and brush the floor: CircuPool allows 24 to 48 hours in summer, Hayward says the salt reading may take 24 hours.
  9. Start and dial inStart at about 50% output (INYO Pools), wait 24 hours after each change before testing free chlorine (Pentair), and test chlorine and pH twice a day at first (CDC).
The conversion order, with each step's number from the manuals: stabilizer 30 to 50 ppm, 1 month after new plaster, 8.34 lb of salt per 100 ppm per 10,000 gallons, 24 to 48 hours to dissolve.
The conversion order, with each step’s number from the manuals: stabilizer 30 to 50 ppm, 1 month after new plaster, 8.34 lb of salt per 100 ppm per 10,000 gallons, 24 to 48 hours to dissolve.
Conversion targets by chlorinator manual: salt, stabilizer, plaster wait and cell placement
Chlorinator (manual)Salt target (ppm)Stabilizer target (ppm)Wait after new plasterCell placementSource
Hayward AquaRite 900 / S33,200 (2,700 to 3,400)30 to 50 (AquaRite 900)10 to 14 days (S3)Return line, after filter, heater and solarHayward 092623 and 092769 manuals
Pentair IntelliChlor IC and Plus/LT3,600 (3,600 to 4,500 on IC)30 to 50 (IC guide)At least 1 monthAfter the filter and heaterPentair 520589 and 523854 guides
Jandy AquaPure3,000 to 3,50050 to 75; 75 to 85 above 86 F30 daysPer manual plumbing diagramJandy H0325600 Rev F
CircuPool CORE3,500 (3,000 to 4,000)30 to 5030 daysReturn line, last equipment before the poolCircuPool CORE manual R202411

Sources: Hayward, Pentair IC, Pentair Plus/LT, Jandy, CircuPool. Download CSV

Salt dose for any gallons and target, including partial top-ups, is in our pool salt calculator, which checks the 8.34 formula against five maker charts. Gallons for odd shapes come from our pool volume calculator.

Do you have to drain a pool to convert it to salt water?

Usually not. River Pools says you will not have to drain and refill, and INYO Pools describes adding salt straight to the existing water. Drain only part of the water when stabilizer is above the manual target, which is common after years of trichlor tablets: they add 0.56 lb of cyanuric acid per lb of tablet.

Tablet pools build stabilizer fast. Our saltwater pool vs chlorine study works out that a year-round 20,000 gallon tablet pool at mid demand adds about 304 ppm of cyanuric acid a year before dilution, while the 2024 MAHC caps public pools at 90 ppm. If a test reads 80 ppm and your chlorinator wants 30 to 50, replace water first; the share to drain for each reading is in our cyanuric acid pool guide.

A 20,000 gallon pool needs 14 bags of 40 lb to reach 3,200 ppm from zero; broadcast them around the pool with the generator off.
A 20,000 gallon pool needs 14 bags of 40 lb to reach 3,200 ppm from zero; broadcast them around the pool with the generator off.

Plaster pools need one more check. Pentair warns that salt is a corrosive element and severe salt damage can occur on uncured plaster, so it asks for at least one month after new or resurfaced plaster (Pentair). A resurfacing scheduled for spring is the cheapest moment to convert: drain once, resurface, wait 30 days, then salt.

Get quotes to convert your pool

Will salt water damage pool equipment, plaster or natural stone?

It can, and the makers say so in their manuals. Pentair calls salt an inherently corrosive material for metal parts and certain surfaces, Hayward’s warranty excludes natural stone degradation next to the pool, and heater makers cap salt at 5,000 ppm. Seal stone first, keep salt in the chlorinator’s band and bond the equipment.

Corrosion and stone rules quoted from chlorinator and heater manuals
SourceWhat it saysWhat to do before converting
Pentair IntelliChlor Plus/LT guideSalt is an inherently corrosive material; metal components and certain pool surfaces are particularly susceptibleList metal ladders, rails, cover tracks and heaters; check each maker's salt limit
Pentair Plus/LT guideBond the equipment with solid copper no smaller than 8 AWG to metal within 5 ft of the pool wallsHave an electrician confirm the bonding conductor reaches the new equipment
Hayward AquaRite S3 manualConsult a stone installation specialist before use with natural stone coping or adjacent decking; warranty excludes natural stone degradationSeal stone with a salt-rated sealer before adding salt
Jandy AquaPure manualNatural stone porosity and hardness vary greatly; seal masonry and reapply on schedulePut resealing on a calendar
Pentair Max-E-Therm heater manualSalt up to 5,000 ppm maximumKeep salt in the chlorinator's band, far below heater limits
Hayward heat pump manualSalt 2,700 to 5,000 ppm; outside the range is corrosive to the heat exchangerSame
River Pools (2021)Metal pool walls and automatic cover tracks can corrode in salt poolsAsk the wall or cover maker about salt before converting

Sources: Pentair Plus/LT guide, Hayward AquaRite S3 manual, Jandy AquaPure manual, PC&S research (heater manuals), River Pools. Download CSV

Natural stone is where warranties stop. Hayward’s AquaRite S3 manual tells owners using natural stone coping or adjacent decking to consult a stone installation specialist on type, sealant and maintenance before installing, and its warranty excludes stone degradation (Hayward). Sealer coverage, cure time and the 5 year wear rating for one salt-rated sealer are in our travertine pool deck guide.

How much does it cost to convert a pool to salt water?

For a 20,000 gallon pool, $1,763 to $3,146 in November 2026: a $1,495 to $2,478 chlorinator, $167.86 of salt and $0 to $500 of installation. A CircuPool CORE35 that plugs into an outlet is the low end; a Jandy AquaPure 1400 with a pro install is the high end. Budget a replacement cell of $737 to $1,819 later.

Conversion cost build for a 20,000 gallon pool: three systems, dated prices
LineCircuPool CORE35, DIYHayward AquaRite W3AQR9, pro installJandy AquaPure 1400, pro installSource
Chlorinator system$1,595$1,999$2,477.98CircuPool; Leslie's; INYO
Salt, 534 lb = 14 bags of 40 lb at $11.99 (20,000 gal to 3,200 ppm)$167.86$167.86$167.86Leslie's Jun 2026; PC&S formula
Installation$0 (plugs into a standard outdoor outlet)$300 to $500$300 to $500CircuPool; INYO Pools guide
Total$1,762.86$2,466.86 to $2,666.86$2,945.84 to $3,145.84PC&S arithmetic
Replacement cell at year 5 (not in total)$737$899$1,640.99CircuPool; Leslie's; INYO

Sources: CircuPool and CircuPool cell, Leslie‘s, INYO APUREM, INYO PLC1400, Leslie‘s salt, INYO Pools install range; read June to November 2026. Download CSV

Cost to convert a 20,000 gallon pool to salt water, by system, November 2026US dollars, system + salt + installation; River Pools range shown for comparison
Cost to convert a 20,000 gallon pool to salt water, by system, November 2026Range chart: converting a 20,000 gallon pool costs $1,763 with a CircuPool CORE35 installed DIY, $2,467 to $2,667 with a Hayward AquaRite W3AQR9 and $2,946 to $3,146 with a Jandy AquaPure 1400, against River Pools' $1,700 to $2,500.$0$1,000$2,000$3,000$4,000CircuPool CORE35, DIY: $1,763 to $1,763CircuPool CORE35, DIYHayward AquaRite W3AQR9, pro install: $2,467 to $2,667Hayward AquaRite W3AQR9, pro installJandy AquaPure 1400, pro install: $2,946 to $3,146Jandy AquaPure 1400, pro installRiver Pools inground estimate (2021, salt extra): $1,700 to $2,500River Pools inground estimate (2021, salt extra)

Excludes stabilizer, test kits, permits and electrical work beyond plugging in or wiring to an existing pump timer.

Source: CircuPool, INYO Pools and Leslie's listings (June to November 2026); INYO installation range; River Pools (2021); PC&S arithmetic. Download chart data (CSV)

Published ranges sit close to this build. River Pools put inground conversions at $1,700 to $2,500 plus salt at 25 to 63 cents a pound (River Pools, 2021), and INYO Pools quotes $300 to $500 for a pool company to install a unit it says many owners fit in 3 to 6 hours (INYO Pools). Both are older than our November 2026 equipment prices, and cells have risen: Leslie’s W3T-CELL-9 went from $699 in July 2024 to $899 in June 2026, a trend tracked in our pool equipment prices study.

Is it cheaper to run a salt water pool or a chlorine pool?

In a year-round pool, salt beats liquid chlorine and roughly ties tablets: $4,204 over 10 years at mid demand against $5,904 for 12.5% liquid and $4,106 for tablets. In a 4-month season, salt costs more than both. The cell is the biggest running cost, $147 to $364 a year at a 5 year life. Year-by-year totals, new-build pricing and installed system prices are in our salt water pool cost guide.

10-year sanitizer cost, 20,000 gallon pool: salt system vs tablets vs liquid chlorine (2026 prices)
Season (DOE)Chlorine demandSalt system pool, 10-yr3-inch tablet pool, 10-yrLiquid chlorine 12.5%, 10-yrSalt minus liquid
Year-round (365 days)Low$4,022$2,346$3,374$649
Year-round (365 days)Mid$4,204$4,106$5,904-$1,700 (break-even year 7)
Year-round (365 days)High$4,458$6,570$9,446-$4,988 (break-even year 3)
4-month (May to Aug)Mid$3,923$1,384$1,989$1,934

Source: PC&S Saltwater Pool vs Chlorine study (EIA July 2026 electricity, Leslie’s 2026 prices, DOE season lengths). Download CSV

Replacement cell cost per year at a 5 year life, by model
Replacement cellPrice (seller, date)Cost per year at a 5 year life
CircuPool CORE35$737 (CircuPool, Nov 8, 2026)$147.40
Hayward W3T-CELL-9$899 (Leslie's, Jun 2026)$179.80
Pentair IntelliChlor LT25$1,209.99 (INYO, Nov 8, 2026)$242.00
Jandy AquaPure PLC1400$1,640.99 (INYO, Nov 8, 2026)$328.20
Pentair IntelliChlor PLUS40$1,819 (INYO, Nov 8, 2026)$363.80

Sources: CircuPool, Leslie‘s, INYO LT25, INYO PLC1400, INYO PLUS40; life from Mahoning County Public Health. Download CSV

The study’s year-round salt pool runs about $285 a year: $42 of electricity at the July 2026 US average of 18.31 cents per kWh (EIA), $63 of salt and stabilizer top-up and $180 of cell wear. Swap the $899 Hayward cell for a $737 CircuPool cell and wear drops to $147; a $1,819 Pentair PLUS40 cell lifts it to $364.

What are the pros and cons of a salt water pool?

The gains are steady chlorine without hauling jugs, no stabilizer build-up from tablets and lower costs than liquid chlorine in year-round pools. The costs are a $1,495 to $2,478 system, a cell every 3 to 7 years, rising pH, corrosion risk to metal and stone, and no savings in short seasons.

Salt water pool claims: what several guides say vs what the primary source says
What several guides sayWhat the primary source saysSource
A salt pool's chlorine has no chloraminesPentair's own guide says chloramines form when ammonia combines with free chlorine and tells owners to super chlorinate at start-upPentair IntelliChlor Plus/LT guide; CDC
Ocean water is 50,000 ppm saltUSGS puts ocean water at about 35,000 ppmUSGS
Salt pools are cheaper to runOnly in year-round pools against liquid chlorine: a 4-month salt pool costs $2,540 more than tablets over 10 years at mid demandPC&S saltwater vs chlorine research
Keep using a few tablets for backupPentair: do not use trichlor or dichlor with a salt chlorine generatorPentair IntelliChlor Plus/LT guide

Sources: Pentair, CDC, USGS, PC&S research; guide claims from INYO Pools and other conversion guides read November 2026. Download CSV

Cell life estimates vary: 3 to 7 years in retailer guides such as INYO Pools, 5 years on average per Mahoning County Public Health. Day-to-day care after the switch, from cell cleaning to pH, is in our salt water pool maintenance guide, and the full cost and chemistry comparison is in our saltwater pool vs chlorine study. Salt cells push pH up as they work, so keep muriatic acid on hand and use the doses in our how to lower pH in pool guide.

Should you convert your pool to salt water?

Convert if your pool runs year-round on liquid chlorine, your stabilizer is in range and you have no unsealed stone or metal walls. Stay on tablets in a 4-month season unless convenience is worth about $2,540 over 10 years. Size the cell above your gallons, and up one size in hot, year-round climates.

Salt water conversion decision table: if your situation is X, do Y
If your situation isDo thisWhy (source)
Year-round pool now on liquid chlorineConvert: the 10-year salt cost is $1,700 lower at mid demand, breaking even in year 7PC&S saltwater vs chlorine research
4-month season, tablets work fineStay on tablets unless convenience is worth about $2,540 over 10 yearsPC&S research (DOE season)
Pool larger than 80% of a cell's rating, hot climateSize up one model; Jandy recommends up-sizing for year-round, high-temperature poolsJandy AquaPure manual
Stabilizer above the manual target (e.g. above 50 ppm)Partially drain before adding salt, using the drain table on our cyanuric acid pagePentair and CircuPool 30 to 50 ppm
Plaster under 30 days oldWait: 30 days (Jandy, CircuPool), 1 month (Pentair), 10 to 14 days (Hayward S3)Manuals
Natural stone coping or deckSeal the stone before the first bag of saltHayward manual; LATICRETE sealer data sheet
Metal walls or automatic cover tracksAsk the wall or cover maker about salt firstRiver Pools; Pentair corrosion warning

Sources: PC&S research, Jandy, Pentair, CircuPool, Hayward, River Pools. Download CSV

A tidy equipment pad leaves room for the cell on the return line after the filter and heater, the placement Pentair and Hayward specify.
A tidy equipment pad leaves room for the cell on the return line after the filter and heater, the placement Pentair and Hayward specify.

How we compiled this

We read 26 documents between October and November 2026: six chlorinator manuals from Hayward, Pentair, Jandy and CircuPool, 14 dated price listings from CircuPool, INYO Pools and Leslie’s (Wayback captures for Leslie’s), conversion guides from River Pools and INYO Pools, CDC and MAHC guidance, a county health fact sheet and USGS salinity data. Running costs come from our saltwater pool vs chlorine model; we did not install or test any system.

Frequently Asked Questions

How much does it cost to convert a pool to a saltwater system?

About $1,763 to $3,146 for a 20,000 gallon pool at November 2026 prices: $1,495 to $2,478 for the system, $167.86 for 534 lb of salt and $0 to $500 to install. River Pools put inground conversions at $1,700 to $2,500 plus salt in 2021 (River Pools).

Can you turn a regular pool into a salt water pool?

Yes. Add a salt chlorine generator to the return line after the filter and heater, dissolve salt to the manual’s target (3,000 to 3,600 ppm by model) and keep testing chlorine, pH and stabilizer. Check first for metal walls, cover tracks and natural stone, and wait 30 days after new plaster (Pentair).

What are the disadvantages of a saltwater pool?

Upfront cost of $1,495 to $2,478 for the system, a replacement cell at $620 to $1,819, pH that rises as chlorine is made, and corrosion risk: Pentair calls salt inherently corrosive, and Hayward’s warranty excludes natural stone damage (Hayward). In short seasons it also costs more than tablets.

Is it cheaper to run a saltwater pool or a chlorine pool?

It depends on season length. In a year-round 20,000 gallon pool at mid demand, salt costs $4,204 over 10 years against $5,904 for 12.5% liquid chlorine and $4,106 for tablets. In a 4-month season, salt costs $3,923 against $1,384 for tablets (PC&S research).

Do you have to drain your pool to convert to salt water?

No, unless stabilizer is above the chlorinator’s target. Most manuals want 30 to 50 ppm cyanuric acid, and a year-round tablet pool can add about 304 ppm a year before dilution (PC&S research). If you test high, replace part of the water first, then add salt.

How much salt do I need to convert my pool?

8.34 lb per 100 ppm per 10,000 gallons. A 20,000 gallon pool going from 0 to 3,200 ppm (Hayward’s target) needs 534 lb, or 14 bags of 40 lb at $11.99 each (Leslie‘s, June 2026). Pentair’s 3,600 ppm target needs about 600 lb.

Sources

  1. Hayward. AquaRite S3 manual 092769 Rev D. Accessed 2026-11-08.
  2. Hayward. Aqua Rite product manual. Accessed 2026-11-08.
  3. Pentair. IntelliChlor Plus and LT Installation and User's Guide 523854 Rev B. Accessed 2026-11-08.
  4. Pentair. IntelliChlor IC15 to IC60 Installation and User's Guide. Accessed 2026-11-08.
  5. Jandy (Zodiac). AquaPure and PureLink manual H0325600 Rev F. Accessed 2026-11-08.
  6. CircuPool. CORE Series manual R202411. Accessed 2026-11-08.
  7. CircuPool. CORE15 salt chlorine generator. Accessed 2026-11-08.
  8. CircuPool. CORE35 salt chlorine generator. Accessed 2026-11-08.
  9. CircuPool. CORE55 salt chlorine generator. Accessed 2026-11-08.
  10. CircuPool. CORE15 replacement cell. Accessed 2026-11-08.
  11. CircuPool. CORE35 replacement cell. Accessed 2026-11-08.
  12. CircuPool. CORE55 replacement cell. Accessed 2026-11-08.
  13. INYO Pools. IntelliChlor LT25 cell EC-523747. Accessed 2026-11-08.
  14. INYO Pools. IntelliChlor Plus40 cell. Accessed 2026-11-08.
  15. INYO Pools. AquaPure power supply APUREM. Accessed 2026-11-08.
  16. INYO Pools. AquaPure 1400 cell PLC1400. Accessed 2026-11-08.
  17. INYO Pools. AquaRite W3AQR3 system. Accessed 2026-11-08.
  18. Leslie's. W3AQR9 AquaRite system (Wayback Jun 30, 2026). Accessed 2026-11-08.
  19. Leslie's. W3AQR15 AquaRite system (Wayback Jun 30, 2026). Accessed 2026-11-08.
  20. Leslie's. W3T-CELL-9 (Wayback Jun 30, 2026). Accessed 2026-11-08.
  21. Leslie's. W3T-CELL-15 (Wayback Sep 16, 2026). Accessed 2026-11-08.
  22. Leslie's. Pool salt 40 lb (Wayback Jun 30, 2026). Accessed 2026-11-08.
  23. INYO Pools. Converting your pool to saltwater. Accessed 2026-11-08.
  24. River Pools and Spas. Saltwater Pool Conversion: Cost, Steps, Pros, Cons (2021). Accessed 2026-11-08.
  25. CDC. Home pool and hot tub water treatment and testing. Accessed 2026-11-08.
  26. CDC. Model Aquatic Health Code 2024. Accessed 2026-11-08.
  27. Mahoning County Public Health. Pools equipped with a chlorine generator from salt. Accessed 2026-11-08.
  28. USGS. Saline Water and Salinity. Accessed 2026-11-08.
  29. U.S. EIA. Electric Power Monthly Table 5.6.A. Accessed 2026-11-08.
  30. Pool Construction & Service. Saltwater Pool vs Chlorine (PC&S research). Accessed 2026-11-08.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.