Skip to content
How to test pool water: morning pool deck with a sample cup and empty test tubes beside clear water
Pool care: water testing

How to Test Pool Water: Sampling, Test Methods and What Your Readings Mean

How to test pool water: fill a clean vial at elbow depth away from return jets, run a DPD or FAS-DPD test for free chlorine and pH, and repeat at least twice a day, as CDC advises.

Free Pool Quote Match

Tell us about your pool project. We match you with licensed local pros who cover your area.

Step 1 of 3: Your project

Free for homeownersNo obligationAbout 60 seconds

  • ✓Elbow depth, between inletsThe 2024 MAHC samples at least 18 inches down.
  • ✓Twice a dayCDC: test chlorine and pH at least twice daily.
  • ✓Drops beat stripsCDC rates DPD kits above strips; titration reads to 0.2 ppm.
Quick answer
Take the sample at elbow depth, away from return jets and corners. Test free chlorine, total chlorine and pH with a DPD or FAS-DPD kit at least twice a day (CDC), alkalinity weekly and hardness and stabilizer monthly. Aim for 1 ppm free chlorine or more (2 ppm with stabilizer) and pH 7.0 to 7.8.
At least twice a day
Chlorine and pH
18 in or more
Sample depth
0.2 or 0.5 ppm
Drop test step
$0.30
Strip price per test

Key takeaways

  • CDC says to test chlorine and pH at least twice a day with a DPD kit and calls test strips less accurate than DPD kits.
  • The 2024 Model Aquatic Health Code (MAHC) takes samples at least 18 inches below the surface, between water inlets (section 5.7.4.3.1).
  • Color matching is accurate to half the gap between color standards, and drop tests to one drop, per the Taylor Technologies FAQ; a Taylor K-2006 drop is 0.2 or 0.5 ppm.
  • Strips cost about $0.30 per test (AquaChek 7-in-1, Sunplay, November 2026) against $1.04 for the Taylor K-2005 and $1.60 for a LaMotte ColorQ photometer.
  • 23% of do-it-yourself pool owners in a 2020 Water Quality & Health Council survey tested chlorine and pH once every two weeks or less, against CDC’s advice of twice a day.

What should you test in pool water, and how often?

Test free chlorine and pH most often: CDC says at least twice a day for home pools, and the 2024 MAHC has public pools test them before opening and every 2 to 4 hours. Total alkalinity is weekly, calcium hardness and cyanuric acid monthly, and cyanuric acid weekly when stabilized chlorine is the main sanitizer. Combined chlorine needs the total chlorine test too. Every reading’s target, with the CDC, MAHC, Florida, California and Texas limits side by side, is in our pool chemical levels chart.

What to test, the target, and how often: home pools and the 2024 MAHC public pool schedule
TestTargetHome pool rhythmPublic pool rule (2024 MAHC)Source
Free chlorine1 ppm or more; 2 ppm with stabilizerAt least twice a dayBefore opening, then every 2 hours (manual feed) or 4 hours (automated)CDC home pool page; MAHC 5.7.5.1 to 5.7.5.3
pH7.0 to 7.8At least twice a dayWith every free chlorine testCDC; MAHC 5.7.5.1 to 5.7.5.3
Combined chlorine (total minus free)Act above 0.4 ppmOnce or twice a weekBefore opening each dayMAHC 5.7.4.4.2 and 5.7.5.1; Taylor (May 15, 2025)
Total alkalinity60 to 180 ppmWeeklyWeeklyMAHC 5.7.4.4.1 and 5.7.5.5
Calcium hardness2,500 ppm or lessMonthlyMonthlyMAHC 5.7.4.4.3 and 5.7.5.6
Cyanuric acid (stabilizer)90 ppm or lessMonthly; weekly on trichlor or dichlorMonthly; weekly with stabilized chlorine; 24 hours after adding CYAMAHC 5.7.3.1.3.2 and 5.7.5.7
Salt (salt pools)Chlorinator maker's rangeWeeklyAt least weekly or per makerMAHC 5.7.5.11

Sources: CDC home pool page; CDC, 2024 MAHC code; Taylor Technologies. Accessed October 26 and November 1, 2026. Download CSV

2024 MAHC sections 5.7.4.3 and 5.7.5 (printed pages 146 and 147): sample at least 18 inches deep between inlets; test chlorine and pH every 2 or 4 hours, alkalinity weekly, hardness and CYA monthly. PDF copy accessed October 26, 2026.
2024 MAHC sections 5.7.4.3 and 5.7.5 (printed pages 146 and 147): sample at least 18 inches deep between inlets; test chlorine and pH every 2 or 4 hours, alkalinity weekly, hardness and CYA monthly. PDF copy accessed October 26, 2026.

Home pools are not bound by the MAHC, but section 5.7.5 is the only published schedule with section numbers, and our pool maintenance checklist builds the weekly and monthly jobs around it; salt pools add the weekly salt test covered in our salt water pool maintenance guide. Taylor Technologies suggests testing at roughly the same time each day, ideally in the morning before sunlight starts breaking down chlorine, so readings compare day to day.

How do you take a pool water sample?

Push an upturned cup or vial to elbow depth, turn it upright to fill, and test right away. Virginia DOH says sample 12 to 18 inches down and stay away from corners and return lines, where water fresh from the chlorinator reads high. The 2024 MAHC asks for at least 18 inches, a spot between inlets and water 3 to 4 feet deep.

  1. Pick the spotOpen water between inlets, not a corner, skimmer mouth or return jet (Virginia DOH; MAHC 5.7.4.3.1).
  2. Rinse the tube in the poolSeveral times, then empty it (Florida DOH Sarasota).
  3. Go to elbow depthMouth down to 12 to 18 inches (Virginia DOH), at least 18 inches for public pools (MAHC); turn it upright to fill.
  4. Fill to the line9 mL for chlorine and 44 mL for pH on the Taylor tubes in the Florida DOH guide.
  5. Check the temperatureWarm a sample below 60 F to at least 60 F before testing (MAHC Annex).
  6. Cap, never cover with a fingerChemical traces on skin change the result (Virginia DOH).
Where to sample: elbow depth (12 to 18 inches per Virginia DOH, 18 inches or more per the 2024 MAHC), between inlets, away from return jets and corners. The ordered steps above hold the same rules.
Where to sample: elbow depth (12 to 18 inches per Virginia DOH, 18 inches or more per the 2024 MAHC), between inlets, away from return jets and corners. The ordered steps above hold the same rules.

Public pools rotate the spot. The MAHC rotates samples around the shallow end and adds a deep end sample once a week (sections 5.7.4.3.2 and 5.7.4.3.3). If you are taking water to a store, the Virginia DOH operator guide (2018) says to use a clean container, preferably glass, so leftover chemicals do not skew the result.

How to test pool water with a DPD kit, step by step

A DPD kit reads free chlorine, total chlorine and pH from two tubes. Add 5 drops each of DPD #1 and #2 to the 9 mL chlorine sample for free chlorine, 5 drops of DPD #3 for total, and 5 drops of phenol red to the pH tube, then compare colors in daylight, per the Florida DOH Sarasota guide to the Taylor kit.

  1. Check the reagent datesReplace anything past its best-by date (Taylor FAQ).
  2. Free chlorine5 drops DPD #1 (R-0001) and 5 drops DPD #2 (R-0002) in the 9 mL tube; cap, invert, read the pink against the chlorine scale.
  3. Total chlorineAdd 5 drops DPD #3 (R-0003) to the same tube; read again; total minus free is combined chlorine.
  4. pH5 drops phenol red (R-0004) in the 44 mL tube; read against the pH scale.
  5. Read in daylightKeep your back to the sun; incandescent or fluorescent light and sunglasses distort the match (Taylor FAQ).
  6. Log it and rinseWrite down the numbers and time; rinse tubes so DPD #3 does not skew the next free chlorine test (Taylor FAQ).

How do you use a FAS-DPD kit? Add the DPD powder, then count drops of ferrous ammonium sulfate (FAS) titrant until the pink disappears; drops times the factor is free chlorine. On the Taylor K-2006 each drop is 0.2 or 0.5 ppm, depending on sample size. The Taylor FAS-DPD article (May 8, 2025) says the clear endpoint removes color matching and reads up to 20 ppm, so the same kit tests a shock.

How do you use test strips? Dip, remove, read. The AquaChek 7-in-1 directions say to dip the strip and remove it immediately, hold it level for 15 seconds without shaking, then match the pads to the bottle chart. Read the pads at the time the label gives. Our free chlorine vs total chlorine guide explains what the two chlorine numbers mean.

Test strips vs liquid kits vs digital testers: which is most accurate?

Drop titration and photometers read finest. The 2024 MAHC Annex calls titration accurate to 0.2 mg/L and portable colorimeters the most accurate poolside kits where affordable, while color matching is accurate only to half the gap between color blocks. CDC says strips are less accurate than DPD kits. Near 4 ppm, a strip or comparator can be off by 1.0 ppm.

Pool water test methods compared: what each reads, how finely, and what it costs (November 2026)
MethodExample (maker code)What it measuresChlorine color steps or resolutionChlorine rangeReagent lifePrice (listing, Nov 1, 2026)Price per chlorine testSource
Test stripTaylor S-1403 7-WayFree and total chlorine, pH, alkalinity, hardness, CYA, bromineFree: 0, 1, 2, 3, 5, 10 ppm; total: 0, 0.5, 1, 2, 5, 10 ppm0 to 10 ppmBest-by date on label; replace each season$17.42 (Taylor)Not statedTaylor S-1403 page; Taylor FAQ
Test stripAquaChek Silver 7-in-1Same 7 testsBlocks not listedFree 0 to 20 ppm; total 0 to 10 ppmCheck the expiration date (CDC)$29.95 for 100 strips (Sunplay)$0.30Sunplay listing
OTO liquid kitTaylor K-1000Total chlorine, bromine, pH; no free chlorine0.5, 1, 2, 3, 5 ppm0.5 to 5 ppmBest-by date; replace each season$17.21 (Taylor)Not statedTaylor K-1000 page
DPD color-match kitTaylor K-1004Free and total chlorine, pH, alkalinity, bromine0.5, 1, 2, 3, 5 ppm0.5 to 5 ppmBest-by date; replace each season$36.21 (Taylor)Not statedTaylor K-1004 page
DPD color-match kitTaylor K-2005Free and total chlorine, pH, alkalinity, hardness, CYA1, 2, 3, 5, 7.5, 10 ppm1 to 10 ppmBest-by date; replace each season$114.47 (Taylor)$1.04 (110 chlorine tests)Taylor K-2005 page; Taylor FAQ
FAS-DPD drop titrationTaylor K-2006Free and combined chlorine, pH, alkalinity, hardness, CYA1 drop = 0.2 or 0.5 ppmUp to 20 ppmBest-by date; replace each season$142.71 (Taylor)Not statedTaylor K-2006 page; Taylor FAS-DPD article
Digital photometerLaMotte ColorQ 2x PRO 7 (2086)Free and total chlorine, bromine, pH, alkalinity, hardness, CYADigital readout; NSF level L1 or L2 for chlorine0 to 10 ppmNSF shelf life based on 12 months$229.95 (Sunplay)$1.60 (144 tests)LaMotte 2086 page; Sunplay
Store testLeslie's AccuBlue10 items incl. free and total chlorinePhotometer; resolution not publishedNot publishedn/aFree in store$0Leslie's AccuBlue pages (Wayback copies, 2025)

Sources: Taylor S-1403; Sunplay AquaChek; Taylor K-1000; Taylor K-1004; Taylor K-2005; Taylor K-2006; Taylor FAQ; LaMotte 2086; Sunplay LaMotte 2086; Leslie AccuBlue (Wayback). Prices accessed November 1, 2026. Price per test = price divided by the chlorine tests the maker states (PC&S arithmetic). Download CSV

How far a 4 ppm free chlorine reading can be off, by test method (Taylor accuracy rule, 2026)Range in ppm; dot marks the 4 ppm reading
How far a 4 ppm free chlorine reading can be off, by test method (Taylor accuracy rule, 2026)Range chart: strip and two DPD color kits span 3.0 to 5.0 ppm for a 4 ppm reading; FAS-DPD spans 3.5 to 4.5 at 0.5 ppm per drop and 3.8 to 4.2 at 0.2 ppm per drop.01.22.53.85Strip (S-1403): 3 to 5, point 4Strip (S-1403)DPD color match (K-1004): 3 to 5, point 4DPD color match (K-1004)DPD color match (K-2005): 3 to 5, point 4DPD color match (K-2005)FAS-DPD, 0.5 ppm per drop: 3.5 to 4.5, point 4FAS-DPD, 0.5 ppm per dropFAS-DPD, 0.2 ppm per drop: 3.8 to 4.2, point 4FAS-DPD, 0.2 ppm per drop

At 7.5 ppm the strip range widens to 5.0 to 10.0 ppm; see the table below.

Source: PC&S arithmetic: Taylor FAQ (color match half the gap between standards; drops plus or minus one) and color standards on the Taylor S-1403, K-1004, K-2005 and K-2006 pages, accessed November 1, 2026.. Download chart data (CSV)

Worked example: how far a 4 ppm and a 7.5 ppm chlorine reading can be off, by method
MethodSteps around 4 ppmAccuracy rule (Taylor)Range for a 4 ppm reading (ppm)Range for a 7.5 ppm reading (ppm)
Taylor S-1403 strip3 and 5 ppmHalf the gap: plus or minus 1.0 ppm3.0 to 5.05.0 to 10.0 (5 and 10 ppm blocks)
Taylor K-1004 DPD3 and 5 ppmHalf the gap: plus or minus 1.0 ppm3.0 to 5.0Off scale (top 5 ppm)
Taylor K-2005 DPD3 and 5 ppmHalf the gap: plus or minus 1.0 ppm3.0 to 5.06.25 to 8.75 (gaps of 2.5 ppm)
FAS-DPD, 0.5 ppm per drop8 dropsPlus or minus 1 drop: 0.5 ppm3.5 to 4.57.0 to 8.0
FAS-DPD, 0.2 ppm per drop20 dropsPlus or minus 1 drop: 0.2 ppm3.8 to 4.27.3 to 7.7

PC&S arithmetic from the Taylor FAQ accuracy rule and the color standards on the S-1403, K-1004, K-2005 and K-2006 pages. Accessed November 1, 2026. Download CSV

The gap matters most at shock levels. A Taylor S-1403 strip jumps from 5 to 10 ppm, so a 7.5 ppm pool could read anywhere from 5.0 to 10.0, while a K-1004 comparator tops out at 5 ppm. Public pools have no choice: MAHC 4.7.3.5.1 requires test kits certified to NSF/ANSI 50, which grades accuracy as level 1, 2 or 3, and LaMotte lists its ColorQ liquid combined chlorine test at level 1.

Skip OTO kits for chlorine. The Taylor K-1000 reads total chlorine only, and Virginia DOH bars OTO kits at Portsmouth public pools because orthotolidine is a carcinogen as determined by the FDA and its yellow color cannot separate free from total chlorine. One top-ranking guide (Poolonomics) calls strips the easiest way to get accurate readings; CDC says strips are less accurate than DPD kits.

How do you know your test strips and reagents still work?

Check them against a known sample. CDC’s archived test strip page (last reviewed April 2, 2022) mixed 1 drop of liquid bleach into 6 cups of tap water for a 2 to 3 ppm reading and 2 drops for 4 to 5 ppm. Taylor says to replace reagents and strips each season and store them at 36 to 85 F.

CDC's at-home check for chlorine test strips: what each container should read
ContainerTap waterHousehold liquid chlorine bleachFree chlorine the strip should read
1At least 1 cupNone0 to under 1 ppm
2At least 6 cups1 drop2 to 3 ppm
3At least 6 cups2 drops4 to 5 ppm

Source: CDC, Pool and Hot Tub Test Strips (page last reviewed April 2, 2022; no longer on cdc.gov; Internet Archive copy of April 12, 2024). Accessed November 1, 2026. Download CSV

Run the tap for about 2 minutes first and use bleach no more than 3 months old, CDC’s page said, because older bleach may be too weak for an accurate check. A strip that reads 0 in container 3 is past its life. The same three containers work for a DPD kit, though the kit itself is the better reference.

Storage and replacement rules for test reagents and strips, by source
RuleNumberSource
Store reagents and strips at a steady temperature36 F to 85 FTaylor FAQ
Replace reagents and stripsEach season, and past the best-by dateTaylor FAQ; Virginia DOH
Store and use ColorQ reagents for best accuracy68 F to 75 FLaMotte ColorQ 2x user guide
NSF shelf-life basis for ColorQ reagents12 monthsLaMotte 2086 page
Check reagent expiration at public poolsEvery use; record the date2024 MAHC 5.7.3.6.1.1
Warm cold samples before testingTo at least 60 F2024 MAHC Annex 4.7.3.5
Use bleach for the CDC strip check that is fresh3 months old or lessCDC strip page (archived)
Replace Taylor comparator blocksEvery 2 to 3 yearsTaylor FAQ

Sources: Taylor FAQ; Virginia DOH; LaMotte user guide; LaMotte 2086 page; 2024 MAHC; MAHC Annex; CDC strip page (archived). Accessed November 1, 2026. Download CSV

Should you use a pool store water test?

Use it for the slow numbers, not as your chlorine test. Leslie’s AccuBlue runs a free 10-point analysis in about 60 seconds, including alkalinity, hardness, cyanuric acid, salt and metals. Virginia DOH calls store testing a good start for new operators but notes it lets the store sell the fix. Chlorine and pH still need testing at the pool twice a day.

The Leslie AccuBlue page (Internet Archive copy, September 2025) says the unit passes light at different wavelengths through the sample in a test disk, the same photometric idea as a home ColorQ. Bring water from elbow depth in a clean container, and compare the store’s alkalinity and stabilizer with your own monthly test; our cyanuric acid pool guide covers why CYA readings near 100 ppm need a diluted retest.

You can test a public pool too. CDC’s archived strip page told swimmers they can check free chlorine and pH with an over-the-counter strip before getting in, and only 21% of U.S. adults said they had done so in a 2019 Healthy Pools survey, one of the habits our pool hygiene statistics report tracks. A 2010 CDC release found 12.1% of 111,487 routine inspections in 2008 led to immediate closure.

Chemistry failures at Louisville Metro public pools, October 2021 to April 2024Percent of routine inspections or of 1,748 routine free chlorine readings, as labeled
Chemistry failures at Louisville Metro public pools, October 2021 to April 2024Bar chart: 21.6% of inspections had disinfectant out of range, 14.5% of readings were below 1.0 ppm free chlorine, 10.8% of inspections had an imminent health hazard, 8.6% of readings were 0 ppm and 7.4% of inspections had pH outside 7.2 to 7.8.Disinfectant out of range (inspections): 21.6%Disinfectant out of range (inspections)21.6%Free chlorine below 1.0 ppm (readings): 14.5%Free chlorine below 1.0 ppm (readings)14.5%Imminent health hazard (inspections): 10.8%Imminent health hazard (inspections)10.8%Free chlorine 0 ppm (readings): 8.6%Free chlorine 0 ppm (readings)8.6%pH outside 7.2 to 7.8 (inspections): 7.4%pH outside 7.2 to 7.8 (inspections)7.4%

Source: Source: Louisville Metro Public Health and Wellness pool inspection data, tabulated by PC&S research (accessed October 6, 2026).. Download chart data (CSV)

Louisville Metro public pool inspections, October 2021 to April 2024: chemistry failures
MeasureShare (%)Denominator
Routine inspections with disinfectant level out of range21.6Routine inspections, Oct 2021 to Apr 2024
Free chlorine readings below 1.0 ppm14.51,748 routine readings at pool venues
Routine inspections with an imminent health hazard10.8Routine inspections, Oct 2021 to Apr 2024
Free chlorine readings of 0 ppm8.61,748 routine readings at pool venues
Routine inspections with pH outside 7.2 to 7.87.4Routine inspections, Oct 2021 to Apr 2024

Source: Louisville Metro Public Health and Wellness, Pool Inspections, tabulated in PC&S research: Public Pool Inspection Violations. Data accessed October 6, 2026. Download CSV

What do your pool test readings mean?

Fix chlorine and pH first, then balance. Free chlorine under 1 ppm (2 ppm with stabilizer) needs a dose before swimming; over 4 ppm, keep swimmers out. A clear DPD sample after a shock means too much chlorine, not none. Total minus free above 0.4 ppm calls for a breakpoint shock, and pH outside 7.0 to 7.8 comes before any chlorine change.

Decision table: what your pool test readings mean and what to do next
If your situation isDo thisRule behind it
Free chlorine below 1 ppm (2 ppm with stabilizer)Add chlorine and retest before anyone swimsCDC home pool page
Free chlorine above 4 ppmKeep swimmers out and retest; do not add moreHasachlor label re-entry limit
DPD sample stays clear after a shockDilute 1:1 with tap water, retest, multiply by 2CDC; Taylor FAQ (bleaching above 10 ppm)
pH test turns purpleChlorine is above about 10 ppm; retest pH once chlorine fallsLaMotte user guide; MAHC Annex Table 4.7.3.5
Total minus free chlorine above 0.4 ppmShock to about 10 times the gap with unstabilized chlorine2024 MAHC 5.7.4.4.2 and glossary
pH below 7.0 or above 7.8Adjust pH, then retest chlorineCDC home pool page
Total alkalinity outside 60 to 180 ppmAdjust alkalinity before fine-tuning pH2024 MAHC 5.7.4.4.1
Cyanuric acid reads 100 ppm or off the scaleDilute 1:1, retest, multiply by 2; partial drain above 90 ppmTaylor; 2024 MAHC 5.7.3.1.3.2
Strip and drop kit disagreeGo with the DPD or FAS-DPD reading; run the CDC bleach check on the stripsCDC (strips less accurate); CDC strip page
Draining chlorinated water onto a lawnStop chlorine about 10 days ahead; drain once total chlorine reads below 0.01 mg/L and pH is 6.5 to 8.0Orange County, Florida BMP sheet

Sources: CDC; 2024 MAHC; MAHC Annex; Taylor FAQ; LaMotte guide; Hasachlor label; Orange County, Florida; CDC strip page (archived). Accessed November 1, 2026. Download CSV

For the fixes, our guide on how to shock a pool gives label doses, and our calcium hardness guide works through the saturation index. Before a drain, Orange County, Florida asks owners to stop chlorine about 10 days ahead and confirm total chlorine below 0.01 mg/L, far under the 0.5 ppm lowest color block on the Taylor K-1004.

A weekly service visit tests the water on the days a pro is there; our pool cleaning service guide lists what each plan includes.

How we compiled this

We compiled this page in October and November 2026 from 20 primary documents: the 2024 MAHC code and Annex, CDC’s home pool page, an Internet Archive copy of CDC’s retired test strip page, a 2010 CDC release, Florida, Virginia and Orange County health documents, the Hasachlor EPA label, eight Taylor Technologies pages, two LaMotte documents and dated listings from Sunplay and Leslie’s. We did not test any kit; resolution and price per test come from maker figures and our arithmetic. Forum threads were excluded.

Frequently Asked Questions

How do I test my pool water myself?

Fill a rinsed tube at elbow depth away from return jets, add 5 drops each of DPD #1 and #2 for free chlorine, then 5 drops of DPD #3 for total chlorine, and 5 drops of phenol red to the pH tube. Compare colors in daylight. CDC says to do it at least twice a day.

What is the most accurate way to test pool water at home?

A FAS-DPD drop kit or a photometer. The 2024 MAHC Annex calls titration accurate to 0.2 mg/L and recommends it over color matching, and Taylor’s K-2006 counts chlorine at 0.2 or 0.5 ppm per drop. Color blocks are only accurate to half the gap between standards, up to 1.0 ppm near 4 ppm.

How often should you test pool water?

Chlorine and pH at least twice a day, per CDC, and more often when the pool is busy. Public pools under the 2024 MAHC also test alkalinity weekly, calcium hardness and cyanuric acid monthly, cyanuric acid weekly when stabilized chlorine is the main sanitizer, and salt at least weekly in salt pools.

Are pool test strips accurate?

Accurate enough for a quick check, not for dosing. CDC calls strips less accurate than DPD kits, and Taylor rates color matching at half the gap between blocks: on the S-1403 the free chlorine blocks jump from 3 to 5 and 5 to 10 ppm. Check old strips with CDC’s 1 and 2 drop bleach test.

Can I get my pool water tested for free?

Yes. Leslie’s runs a free in-store AccuBlue test that reports 10 items in about 60 seconds, and Virginia DOH notes chemical suppliers usually test at no cost. Bring water from elbow depth in a clean container, ideally glass, and still test chlorine and pH yourself at least twice a day.

What time of day should you test pool water?

Morning, at about the same time each day. Taylor Technologies says morning is ideal because sunlight has not yet begun to break down the chlorine, and same-time readings show trends. CDC’s twice-a-day advice adds a second test later, and more tests when the pool is busy.

Sources

  1. CDC. 2024 Model Aquatic Health Code, 5th Edition, Code Language. Accessed 2026-10-26.
  2. CDC. 2024 Model Aquatic Health Code, 5th Edition, Annex. Accessed 2026-10-26.
  3. CDC. Home Pool and Hot Tub Water Treatment and Testing (May 10, 2024). Accessed 2026-10-26.
  4. CDC. Pool and Hot Tub Test Strips (last reviewed April 2, 2022; Internet Archive copy of April 12, 2024). Accessed 2026-11-01.
  5. CDC. Pool Inspection Data Show Need for Improvement (press release, May 20, 2010). Accessed 2026-11-01.
  6. Virginia Department of Health. Pool Operation and Maintenance Guide (2018). Accessed 2026-10-26.
  7. Florida Department of Health in Sarasota County. How to Use Your Test Kit. Accessed 2026-10-26.
  8. Orange County, Florida. How to Test Your Pool Water (BMP sheet). Accessed 2026-11-01.
  9. U.S. EPA Pesticide Product and Label System. Hasachlor sodium hypochlorite 12.5%, EPA Reg. No. 10897-26 (April 24, 2026). Accessed 2026-10-19.
  10. Taylor Technologies. Water Testing Technical FAQs. Accessed 2026-11-01.
  11. Taylor Technologies. Difference Between Free, Combined and Total Chlorine in Pool Water (May 15, 2025). Accessed 2026-11-01.
  12. Taylor Technologies. How FAS-DPD Tests for Free and Combined Chlorine Values (May 8, 2025). Accessed 2026-10-26.
  13. Taylor Technologies. 7-Way Test Strips, S-1403. Accessed 2026-11-01.
  14. Taylor Technologies. 3-Way Test Kit (OTO), K-1000. Accessed 2026-11-01.
  15. Taylor Technologies. 6-Way Test Kit (DPD), K-1004. Accessed 2026-11-01.
  16. Taylor Technologies. Complete Test Kit, K-2005. Accessed 2026-11-01.
  17. Taylor Technologies. Complete Test Kit (FAS-DPD), K-2006. Accessed 2026-11-01.
  18. LaMotte. ColorQ 2x PRO 7, order code 2086 (NSF table, ranges, test counts). Accessed 2026-11-01.
  19. LaMotte. ColorQ 2x PRO 7 user guide (2086-UG). Accessed 2026-11-01.
  20. Sunplay. AquaChek Silver 7-in-1 Test Strips, 100 strips (listing). Accessed 2026-11-01.
  21. Sunplay. LaMotte ColorQ 2x Pro 7 Test Kit 2086 (listing). Accessed 2026-11-01.
  22. Leslie's. Leslie's AccuBlue Water Test (Internet Archive copy, December 5, 2025). Accessed 2026-11-01.
  23. Leslie's. Leslie's AccuBlue Water Test: Fast, Accurate, Complete (Internet Archive copy, September 13, 2025). Accessed 2026-11-01.
  24. Water Quality & Health Council. 2020 Healthy Pools survey release (reprinted by Swimmer's Daily). Accessed 2026-10-08.
  25. Sachs Media for the Water Quality & Health Council. Healthy Pools 2019 survey results. Accessed 2026-10-08.
  26. Louisville Metro Public Health and Wellness. Louisville Metro KY Pool Inspections. Accessed 2026-10-06.
  27. Poolonomics. Pool Water Testing (claim compared). Accessed 2026-11-01.
Free for homeowners

Get Quotes From Licensed Local Pool Pros

Tell us what you need and your ZIP code. We match you with pool companies that cover your area.