
Tanning Ledge Guide: How Deep, How Big, What It Costs and 14 Fiberglass Models Compared
A tanning ledge is a flat pool shelf under 12 in of water by the ISPSC sun shelf definition; in 83 permits we parsed, the median ledge was 7 ft x 10 ft, about 14% of the pool.
- ✓14 maker models measuredLatham, Leisure Pools, San Juan and River Pools ledges with size, depth, gallons and any listed price.
- ✓83 permits with ledge sizesOriginal count from city permit records: the sizes homeowners actually build, 2012 to 2026.
- ✓Depth that keeps chairs downWhy a 12 in ledge holds 9 in of water, and which chair ratings fit it.
Key takeaways
- The 2024 International Swimming Pool and Spa Code (ISPSC) defines a sun shelf as an area next to the pool wall with a water depth less than 12 in, used for seating and play, and caps underwater seats and benches at 20 in below the waterline (ISPSC 202, ISPSC 809.9).
- River Pools builds its ledges 9 or 12 in below the top of the pool, which leaves 6 or 9 in of water, because most furniture floats in water deeper than 9 in (River Pools, June 2026).
- In 83 permits from 8 US cities and counties that state a ledge size (2012 to 2026), the median tanning ledge is 7 ft x 10 ft, or 70 sq ft, and takes 14.3% of the stated pool size (PC&S permit ledger).
- Add-on fiberglass ledges from Latham, Leisure Pools and San Juan measure 6 ft 10 in x 10 ft 5 in to 9 ft 4 in x 16 ft 5 in outside, and those with published volumes hold 250 to 421 gallons; River Pools prices a separate fiberglass ledge at $5,000 to $15,000 (River Pools, 2025).
- The share of Los Angeles pool permits that name a baja or sun shelf rose from 1.9% in 2019 to 9.4% in 2025, by our count of LADBS permit data.
What is a tanning ledge, and what does the code call it?
A tanning ledge is a wide, flat shelf inside the pool shell that holds a few inches of water for lounging, play and in-water chairs. Builders also call it a sun shelf, baja shelf or tanning shelf. The 2024 ISPSC uses the term sun shelf: an area adjoining the pool wall with a water depth less than 12 in, used for seating and play.
| Measure | Number | Source and date |
|---|---|---|
| Sun shelf, by code definition | Water depth less than 12 in | 2024 ISPSC Section 202 |
| Deepest underwater seat, bench or swimout | 20 in below the design waterline | 2024 ISPSC Section 809.9 |
| River Pools ledge depths (from the top of the pool) | 9 in or 12 in, so 6 in or 9 in of water | River Pools, updated June 29, 2026 |
| Water rating, Ledge Lounger Signature Chaise | 0 to 9 in | Ledge Lounger, read Nov 2, 2026 |
| Water rating, Ledge Lounger Signature Chaise Deep | 0 to 15 in | Ledge Lounger, read Nov 2, 2026 |
| Median tanning ledge in 83 sized permits | 7 ft x 10 ft, 70 sq ft | PC&S parse of city permit records, 2012 to 2026 |
| Median ledge share of stated pool area | 14.3% (72 permits) | PC&S parse of city permit records, 2012 to 2026 |
| Separate fiberglass ledge, cost | $5,000 to $15,000 | River Pools, updated Sept 17, 2025 |
| Water temperature where green algae thrives | Above 85 F | BioGuard, read Oct 27, 2026 |
Sources: 2024 ISPSC Chapter 2 and Chapter 8 (UpCodes); River Pools; Ledge Lounger; PC&S permit ledger; River Pools cost guide; BioGuard. Download CSV
The ISPSC treats a sun shelf as a kind of underwater bench: its definition of underwater bench reads ‘an underwater seat that can be recessed into the pool wall or placed completely inside the perimeter shape of the pool, such as a sun shelf’ (2024 ISPSC 202). That matters because Section 809.9 limits the flat surface of seats, benches and swimouts to 20 in below the design waterline, and Section 809.2 lists underwater benches among the accepted means of entry and exit (ISPSC Chapter 8).
A tanning ledge is not an offset ledge. ISPSC Section 806 uses offset ledge for a narrow step in the wall, no wider than 8 in. Names vary by region: River Pools treats tanning ledge, tanning shelf, baja shelf and sun shelf as the same feature (River Pools), and Los Angeles permits almost always write baja: a 2012 LADBS permit, for example, covers a 15 ft x 30 ft pool with a 12 ft x 15 ft baja entry built to city standard plan 264.
How deep should a tanning ledge be?
Aim for 6 to 9 in of water on the ledge. River Pools builds ledges 9 or 12 in below the top of the pool and says the water sits about 3 in lower, so a 12 in ledge holds 9 in. Ledge Lounger rates its standard Signature Chaise for 0 to 9 in of water, and the ISPSC calls anything under 12 in of water a sun shelf.

| Source | What it says about depth | Measured from | Water on the ledge | Source |
|---|---|---|---|---|
| 2024 ISPSC Section 202 (code) | A sun shelf has a water depth less than 12 in | Water surface | Under 12 in | ICC via UpCodes, 2024 edition |
| River Pools blog | Best ledge depth 9 to 12 in; water sits about 3 in below the ledge height | Top of the pool | 6 to 9 in | River Pools, June 29, 2026 |
| River Pools add-on page | TL09 is 8 in deep, TL15 is 1 ft deep | Not stated | Not stated | River Pools, read Nov 2, 2026 |
| Latham product pages | Genesis/Synergy, Rectangle and Semicircle ledges: 10 in | Not stated | Not stated | Latham, read Nov 2, 2026 |
| Latham FAQ | Ledges come 9 to 18 in deep; Latham recommends at least 12 in | Not stated | Not stated | Latham, read Nov 2, 2026 |
| Leisure Pools Topaz and Opal | 1 ft 0 in flat depth | Not stated | Not stated | Leisure Pools USA, read Nov 2, 2026 |
| San Juan round and Scottsdale ledges | Depth 1 ft | Not stated | Not stated | San Juan Pools model list, read Nov 2, 2026 |
| Shasta Pools | Ledge water about 3 to 6 in, like a first step | Water surface | 3 to 6 in | Shasta Pools, Aug 11, 2026 |
| Ecopool | Factory-set 6 to 12 in of water | Water surface | 6 to 12 in | Ecopool, read Nov 2, 2026 |
| Ledge Lounger | Chairs rated by water depth, tape from ledge surface to waterline | Ledge surface | 0 to 9 in or 0 to 15 in by model | Ledge Lounger, read Nov 2, 2026 |
Sources: ISPSC 202; River Pools blog; River Pools add-ons; Latham product pages and FAQ; Leisure Pools Topaz and Opal; San Juan Pools; Shasta Pools; Ecopool; Ledge Lounger. Read Nov 2, 2026. Download CSV
The depth figures disagree mostly because they measure from different places. River Pools measures from the top of the pool and subtracts about 3 in to reach the waterline, so its 9 in and 12 in ledges hold 6 in and 9 in of water (River Pools). Ledge Lounger, the furniture maker, tells owners to put a tape on the ledge surface and read where the water hits it (Ledge Lounger). Shasta Pools quotes water depth directly, about 3 to 6 in on a typical ledge (Shasta Pools).
Latham is the outlier. Its FAQ says ledges come 9 to 18 in deep and recommends at least 12 in, while its own fiberglass Genesis/Synergy, Rectangle and Semicircle ledges are listed at 10 in (Latham). River Pools warns that at about 15 in small dogs cannot stand and most furniture will not stay put (River Pools), which matches Ledge Lounger’s rating for its Deep chaise: up to 15 in, with a riser above that because the chair ‘may drift, float, or bob’ (Ledge Lounger).
Which depth should you write into the contract? State it as water depth at the design waterline, for example ‘ledge surface 9 in below design waterline’, and ask the builder to show the coping height above water on the plan. That one line removes the 3 in ambiguity behind most of the disagreements in the table.
What is a good size for a tanning ledge?
In 83 permits that state a ledge size, the middle half of tanning ledges run 49 to 105 sq ft, with a median of 7 ft x 10 ft. Latham says most ledges are at least 7 to 8 ft long, and River Pools puts fiberglass ledges at 5 to 8 ft wide. A 10 ft long side seats four standard in-water chaises side by side.
| Measure | 25th percentile | Median | 75th percentile | Permits |
|---|---|---|---|---|
| Short side, ft (how far the ledge reaches into the pool or along it) | 6.0 | 7.0 | 8.0 | 83 |
| Long side, ft | 8.0 | 10.0 | 12.0 | 83 |
| Ledge area, sq ft | 49.0 | 70.0 | 105.0 | 83 |
| Ledge area as % of stated pool size | 10.9 | 14.3 | 20.0 | 72 |
Source: PC&S parse of permit descriptions in our PC&S permit ledger (Los Angeles, East Baton Rouge Parish, Montgomery County MD, Nashville, New Orleans, Raleigh, Cape Coral, Austin open data); pool share uses the 72 permits that also state pool dimensions. Download CSV
Median 70 sq ft; middle half 49 to 105 sq ft.
Source: PC&S parse of city and county open-data permit descriptions (PC&S permit ledger), Nov 2026. Download chart data (CSV)
The permits are our original data. Of 91,881 residential pool permit records in the ledger, 1,048 name a tanning ledge, sun shelf, sun ledge or baja, and 83 of those write the ledge size in a form we could parse. The most common sizes were 8 ft x 8 ft and 7 ft x 10 ft (6 permits each), then 7 ft x 7 ft (5) and 7 ft x 15 ft (4). Typical entries describe a 14 ft x 28 ft gunite pool with a 7 ft x 10 ft tanning ledge (East Baton Rouge Parish, 2023) and a 20 ft x 40 ft pool with a 7 ft x 20 ft ledge (Montgomery County MD, 2025).
Counts description wording only; permits that omit the feature are not counted.
Source: PC&S count of LADBS permit data (data.lacity.org), 2026 through Sept 26. Download chart data (CSV)
Size the ledge from the furniture you plan to put on it. Ledge Lounger’s Signature Chaise is 23 in wide, needs a 2 in gap from the next chair and a 44 in footprint on the ledge (Ledge Lounger). Dividing the long side plus one gap by 25 in gives the count that fits side by side, worked out below for the permit quartiles and two maker ledges.
| Ledge | Long side (in) | Short side (in) | Chaises side by side: (long + 2) / (23 + 2), rounded down | Fits a 44 in Signature Chaise footprint? | Fits a 64 in Signature Chaise Deep footprint? |
|---|---|---|---|---|---|
| Permit 25th percentile, 6 ft x 8 ft | 96 | 72 | 3 | Yes | Yes |
| Permit median, 7 ft x 10 ft | 120 | 84 | 4 | Yes | Yes |
| Permit 75th percentile, 8 ft x 12 ft | 144 | 96 | 5 | Yes | Yes |
| Leisure Pools Topaz, 6 ft 10 in x 10 ft 5 in | 125 | 82 | 5 | Yes | Yes |
| Latham Rectangle, 7 ft 8 in x 15 ft 8 in | 188 | 92 | 7 | Yes | Yes |
Inputs: chaise width, gap and footprints from Ledge Lounger Signature Chaise and Signature Chaise Deep pages (Nov 2, 2026); ledge sizes from the permit table and maker pages. PC&S arithmetic. Download CSV

The ledge also takes room from the swim area. At the permit median, the ledge is 14.3% of the pool size written on the permit, and a quarter of ledges took 20% or more. Latham markets ledges partly on this point: they ‘take up much less room than beach entries’ (Latham, 2021). Our beach entry pool guide works out how much length a sloped entry uses instead.
Which fiberglass pools and add-on ledges have a tanning ledge?
Fiberglass makers sell tanning ledges two ways: as a separate shell set beside the pool, often raised so water spills over, or molded into the pool. Latham, Leisure Pools, San Juan and River Pools list add-on ledges 8 in to 1 ft deep; Latham’s Tuscan Collection builds the ledge into five pool sizes from 11 ft 1 in x 20 ft 3 in to 13 ft 9 in x 39 ft 11 in.
| Maker | Model | Type | Outer size | Depth as listed | Gallons | Envelope sq ft (PC&S, length x width) | Price as listed | Source |
|---|---|---|---|---|---|---|---|---|
| Latham | Genesis/Synergy Semicircle Side | Add-on fiberglass ledge | 9 ft 4 in x 16 ft 5 in | 10 in | 400 | 153.2 | Not published | Latham product page |
| Latham | Rectangle | Add-on fiberglass ledge | 7 ft 8 in x 15 ft 8 in | 10 in | 400 | 120.1 | Not published | Latham product page |
| Latham | Semicircle | Add-on fiberglass ledge | 8 ft 4 in x 16 ft | 10 in | 250 | 133.3 | Not published | Latham product page |
| Leisure Pools | Topaz | Add-on fiberglass ledge | 6 ft 10 in x 10 ft 5 in | 1 ft 0 in flat | Not published | 71.2 | $22,372 (Pools123, Texas, Oct 2026) | Leisure Pools USA; Pools123 |
| Leisure Pools | Opal | Add-on fiberglass ledge | 7 ft 10 in x 10 ft 5 in | 1 ft 0 in flat | Not published | 81.6 | $22,572 (Pools123, Texas, Oct 2026) | Leisure Pools USA; Pools123 |
| San Juan | Round Spill Over Tanning Ledge | Add-on fiberglass ledge | 7 ft 7 in x 11 ft 7 in | 1 ft | 333.6 | 50.9 (maker area) | Not published | San Juan Pools model list |
| San Juan | Scottsdale Spill Over Tanning Ledge | Add-on fiberglass ledge | 8 ft 3 in x 12 ft | 1 ft | 421 | 62.5 (maker area) | Not published | San Juan Pools model list |
| River Pools | TL09 | Add-on fiberglass ledge | Not published on page | 8 in | Not published | $5,000 to $15,000 for a separate ledge (2025) | River Pools add-on page and blog | |
| River Pools | TL15 | Add-on fiberglass ledge | Not published on page | 1 ft | Not published | $5,000 to $15,000 for a separate ledge (2025) | River Pools add-on page and blog | |
| Latham | Tuscan 11.20 | Pool with built-in ledge | 11 ft 1 in x 20 ft 3 in pool | Pool 3 ft 11 in to 5 ft 2 in | 5,000 | Not published | Latham Tuscan Collection | |
| Latham | Tuscan 13.24 | Pool with built-in ledge | 12 ft 10 in x 23 ft 7 in pool | Pool 3 ft 1 in to 5 ft 5 in | 6,100 | Not published | Latham Tuscan Collection | |
| Latham | Tuscan 14.27 | Pool with built-in ledge | 13 ft 9 in x 26 ft 10 in pool | Pool 3 ft 11 in to 5 ft 9 in | 7,900 | Not published | Latham Tuscan Collection | |
| Latham | Tuscan 14.30 | Pool with built-in ledge | 13 ft 9 in x 30 ft 1 in pool | Pool 3 ft 11 in to 5 ft 11 in | 10,000 | Not published | Latham Tuscan Collection | |
| Latham | Tuscan 14.40 | Pool with built-in ledge | 13 ft 9 in x 39 ft 11 in pool | Pool 3 ft 11 in to 6 ft 8 in | 12,200 | Not published | Latham Tuscan Collection |
Sources: Latham Genesis/Synergy, Rectangle, Semicircle and Tuscan Collection pages; Leisure Pools Topaz and Opal; San Juan Pools model list; River Pools add-ons and cost guide; Pools123 price list (modified Oct 15, 2026, read Oct 27, 2026). Other pages read Nov 2, 2026. Download CSV
Gallons tell you what the ledge adds to your chemical dosing. Latham lists 400 gallons for its Rectangle and Genesis/Synergy ledges and 250 for the Semicircle, and San Juan lists 333.6 gallons for its round ledge and 421 for the Scottsdale (San Juan Pools). Add those to the pool’s own volume, or run the combined shape through our pool volume calculator.
The Leisure Pools prices come from one Texas dealer list, which shows $22,372 for the Topaz and $22,572 for the Opal but does not say what the price includes (Pools123). River Pools’ installed guidance is lower, $5,000 to $15,000 for a separate fiberglass ledge, with the raised spillover version at the top of the range (River Pools). Ask for the ledge as its own quote line, with the crane lift, base and plumbing listed. Shell prices for the pool itself are compared in our fiberglass pool cost guide.
Installation is where add-on ledges go wrong. River Pools says a fiberglass ledge needs undisturbed earth or clean crushed stone underneath, concrete blocks under its edges and grout poured to fill voids so it does not feel hollow, and that the work adds a few hours to a fiberglass install against a day or more for a vinyl or concrete ledge (River Pools). Ask your installer to describe that base before the shell is set.
Which tanning ledge chairs and umbrellas work in shallow water?
In-water loungers are rated by water depth, so match the chair to the ledge. Ledge Lounger rates its Signature Chaise for 0 to 9 in and its Signature Chaise Deep for 0 to 15 in, with risers above that. Filled with water, the chaises weigh 144 lb and 270 lb. Umbrellas need a sleeve set into the ledge before the concrete is placed.
| Ledge Lounger model | Water depth rating | Weight empty / filled | Size (L x W x H) | Footprint needed on ledge | Price, Nov 2, 2026 |
|---|---|---|---|---|---|
| Signature Chaise | 0 to 9 in | 34 lb / 144 lb | 70 x 23 x 22 in | 44 in | $799 |
| Signature Chaise Deep | 0 to 15 in; riser above 15 in | 60 lb / 270 lb | 74 x 23 x 31 in | 64 in | $999 |
| Autograph Chaise | 0 to 12 in | 34 lb / 251 lb | 70 x 23 x 30 in | 60 in | Not captured |
| Signature Adjustable Reclining Chaise | 0 to 10 in with console | 47 lb / 175 lb | 64 x 23 x 29 in | 64 in reclined | Not captured |
| Signature Chair | 0 to 20 in with risers | 33 lb / 133 lb | 44 x 20 x 37 in | 35 in | Not captured |
| Signature Lowback Chair | 0 to 20 in with risers | 33 lb / 125 lb | 41 x 21 x 28 in | 36 in | Not captured |
| Autograph Chair | 0 to 12 in | 28 lb / 161 lb | 31 x 25 x 30 in | 24 in | Not captured |
Source: Ledge Lounger Signature Chaise and Signature Chaise Deep product pages and their comparison table, read Nov 2, 2026. Prices as listed that day. Download CSV

Weight is what keeps the chairs in place. The Signature Chaise weighs 34 lb empty and 144 lb once its chamber is filled with water, and the Deep model goes from 60 lb to 270 lb (Ledge Lounger). Ledge Lounger says the plug system holds water to stop buoyancy, which is why the depth rating matters: above the rated depth the chair may float. Check the finish too; the maker lists its chairs as safe for vinyl, pebble and gunite surfaces.
For shade, Blue Haven describes setting a tube-shaped form in the ledge before the gunite or shotcrete is shot, so a standard patio umbrella pole drops into a sleeve once the pool is finished (Blue Haven, updated Aug 31, 2026). Latham lists built-in umbrella sleeves among its ledge options (Latham). A sleeve cannot be added cleanly to a finished fiberglass ledge, so decide on shade before the shell is ordered.
How much does a tanning ledge cost?
A tanning ledge built into a concrete pool costs roughly the pool’s price per sq ft times the ledge area: River Pools’ example is 80 sq ft at $100 per sq ft, or $8,000. A separate fiberglass ledge runs $5,000 to $15,000 (River Pools, 2025), and one Texas dealer lists Leisure ledges at $22,372 and $22,572. Furniture adds $799 to $999 per chaise.
| Cost item | Figure | Date | Source |
|---|---|---|---|
| Concrete ledge, River Pools example: 80 sq ft at a pool cost of $100 per sq ft | $8,000 | Updated Sept 17, 2025 | River Pools |
| PC&S arithmetic: permit-median 70 sq ft ledge at the same $100 per sq ft | $7,000 | Nov 2026 | PC&S on River Pools rate |
| Separate fiberglass ledge, level or raised | $5,000 to $15,000 | Updated Sept 17, 2025 | River Pools |
| Leisure Pools Topaz ledge, Texas dealer list (inclusions not stated) | $22,372 | Page modified Oct 15, 2026 | Pools123 |
| Leisure Pools Opal ledge, Texas dealer list (inclusions not stated) | $22,572 | Page modified Oct 15, 2026 | Pools123 |
| Replaster when adding a ledge to a concrete pool: plaster; pebble | $6 to $8; $7 to $15 per sq ft | HomeGuide, modified Apr 25, 2025 | HomeGuide via PC&S pool finishes guide |
| One in-water chaise: Signature Chaise; Signature Chaise Deep | $799; $999 | Nov 2, 2026 | Ledge Lounger |
Sources: River Pools (updated Sept 17, 2025); Pools123 (modified Oct 15, 2026); HomeGuide resurfacing costs (modified Apr 25, 2025) as compiled in our pool finishes guide; Ledge Lounger (Nov 2, 2026). PC&S arithmetic on the permit median. Download CSV
For a concrete pool, River Pools frames the ledge as more pool area: an 80 sq ft ledge in a pool costing $100 per sq ft adds $8,000, plus crew time because the ledge extends the schedule (River Pools). At the permit median of 70 sq ft the same rate gives $7,000. Use your own bid’s price per sq ft, not ours; the build cost of the whole shell is worked through in our concrete pool cost guide.
Vinyl liner ledges are built on polymer or galvanized steel forms and covered by the liner (Latham). River Pools gives no figure beyond ‘at least a few thousand dollars’ and warns that chairs and pets on a vinyl ledge raise the risk of liner damage (River Pools). Lights and bubblers are priced separately on every pool type.
Can you add a tanning ledge to an existing pool?
Yes, on concrete pools during a full resurfacing, and on vinyl pools when the liner is replaced. Blue Haven says adding a baja shelf is a high-end remodel line worth doing only when new plaster is already planned, because the shelf sides must carry the same finish. Los Angeles permits show remodels that added a 9 ft x 14 ft and a 14 ft 8 in x 8 ft baja.
- Check fit and permitThe remodeler checks whether the pool’s size and shape leave room for the shelf. Pull a permit: LADBS issued one in 2018 to add a 9 ft x 14 ft baja to an existing 47 ft x 19 ft 6 in pool, and one in 2020 to add a 14 ft 8 in x 8 ft baja shelf within a shallow end.
- Drain and stripDrain the pool and chip out the old plaster, the same first step as a resurfacing job (Blue Haven).
- Form the steelA steel crew ties a rebar frame for the shelf that ties into the existing wall (Blue Haven).
- Set sleeves and plumbingPlace umbrella sleeves and any bubbler lines now. Blue Haven notes bubblers on a shelf added to an existing pool need extra plumbing and cost more.
- Shoot the shelfA gunite or shotcrete rig sprays concrete onto the steel to form the solid ledge (Blue Haven).
- Finish with the whole poolPlaster or pebble the shelf with the rest of the pool; HomeGuide put plaster at $6 to $8 and pebble at $7 to $15 per sq ft in 2025. Tile or stone can top the shelf, but its sides take the pool finish.
The steps above follow Blue Haven’s remodel description (Blue Haven), with permit wording from LADBS open data. For vinyl pools, Latham says the best time to add a ledge is new construction or a liner renovation (Latham). For fiberglass, the practical route is a separate fiberglass ledge set beside the shell with its own crushed stone base (River Pools). Wider remodel costs are in our pool remodeling guide.
Do tanning ledges get algae, and are they safe for kids?
A ledge holds a thin layer of water, 250 to 421 gallons on the maker ledges listed here, that sits in full sun. BioGuard says green algae thrives above 85 F, so keep circulation moving over the ledge with a return or bubbler. For safety, the ledge edge drops to a main pool at least 33 in deep under ISPSC 807.2, and no one should dive from it.

Circulation is the practical fix. The ISPSC requires only that the whole pool turn over at least once every 12 hours (ISPSC 810.1), and nothing in the residential chapter sets a separate rate for a ledge. Public pool rules show how regulators treat shallow water: Maricopa County requires a 1 hour turnover for the area of a zero depth entry pool up to 2 ft deep. River Pools and Latham both list bubblers as ledge options (River Pools); ask the builder to put a return or bubbler on the ledge so its 250 to 421 gallons are not a dead zone, and brush the ledge each time you brush the walls.

Diving off a ledge into a residential pool is the main injury risk. The ISPSC bars diving equipment on a Type O, nondiving pool (ISPSC 808.1), and the shallowest point of the main pool can be as little as 33 in deep (ISPSC 807.2). The residential chapter has no depth marker rule; the Model Aquatic Health Code (MAHC) requires depth markers at 1 ft intervals in public pools under 5 ft and NO DIVING markers wherever water is 5 ft or shallower (MAHC 4.5.19, Pueblo County adoption). Owners can borrow that practice: a contrasting tile line along the ledge edge marks the drop.
Is a tanning ledge worth it for your pool?
A tanning ledge pays off when you want in-water lounging, a play area for small children or dogs, or a step-free way in, and it costs swim area: 14.3% of the pool at the permit median. Use the table to match your situation to a depth, a size and a build route, then ask builders to quote the ledge as a separate line.
| If your situation is | Do this | Rule or number behind it |
|---|---|---|
| You want in-water loungers that stay put without weights | Set the ledge 9 to 12 in below the coping, for 6 to 9 in of water | River Pools; Signature Chaise rated 0 to 9 in |
| Your ledge already holds 10 to 15 in of water | Buy deep-rated chairs or risers rather than standard chaises | Signature Chaise Deep rated 0 to 15 in; may drift above 15 in |
| Toddlers or a small dog will use the ledge | Keep water at 9 in or less and supervise; the ledge edge drops to full pool depth | River Pools depth advice; ISPSC 807.2 main pool 33 in or deeper |
| Your yard fits a pool under 12 ft wide | Pick a shell with the ledge built in instead of an add-on beside it | Latham Tuscan 11.20: 11 ft 1 in x 20 ft 3 in with ledge |
| You want 4 or more chaises | Plan a ledge at least 10 ft long and 7 ft from wall to edge | 4 chaises need 120 in at 23 in wide plus 2 in gaps |
| You want an automatic safety cover | Choose an auto cover ready model or get the cover maker's sign-off first | Latham: built-in ledges may need custom cover fabrication |
| Your concrete pool is due for replaster | Add the ledge in the same job | Blue Haven: a ledge is hardly worth it unless new plaster is already planned |
| You have a vinyl liner pool | Add the ledge when the liner is replaced | Latham: build vinyl ledges at new construction or liner renovation |
| You want shade on the ledge | Set an umbrella sleeve before the concrete is shot | Blue Haven remodel process |
Sources: River Pools; Ledge Lounger; 2024 ISPSC; Latham Tuscan Collection; Latham automatic cover price guide (Sept 2026); Blue Haven; Latham. Download CSV
Automatic covers are the trade-off most buyers miss. Latham, which sells Coverstar covers, says pools with built-in tanning ledges may need custom fabrication and engineering, which raises cover cost (Latham, Sept 2026). All five Tuscan models are sold as both tanning ledge and auto cover ready (Latham). Cover prices by pool size are in our automatic pool cover cost guide.
How we compiled this
We read the 28 sources listed below between Oct 3 and Nov 2, 2026: maker pages from Latham, Leisure Pools, San Juan, River Pools and Ledge Lounger, the 2024 ISPSC chapters 2, 3 and 8, the MAHC as adopted by Pueblo County, Maricopa County’s zero depth entry rule, a Texas dealer price list and builder guides from Blue Haven, Shasta Pools and Ecopool. We parsed 1,048 permit descriptions that name a ledge from our 91,881-record permit ledger and kept the 83 with a clear ledge size. We did not build, test or measure any ledge or chair; all sizes are as published.
Frequently Asked Questions
What is a tanning ledge in a pool?
A wide, flat shelf inside the pool that holds a few inches of water for lounging, play and in-water chairs. It is also called a sun shelf, baja shelf or tanning shelf. The 2024 ISPSC defines a sun shelf as an area next to the pool wall with a water depth less than 12 in, used for seating and play.
How deep should a tanning ledge be?
About 9 to 12 in below the top of the pool, which leaves 6 to 9 in of water, according to River Pools. That keeps standard in-water loungers such as the Ledge Lounger Signature Chaise, rated for 0 to 9 in, from floating. Deeper ledges need deep-rated chairs like the Signature Chaise Deep, rated to 15 in.
What is a good size for a tanning ledge?
In 83 permits that state a ledge size, the median ledge is 7 ft x 10 ft, or 70 sq ft, and the middle half run 49 to 105 sq ft. A 10 ft long side seats four 23 in chaises with 2 in gaps. Latham says most ledges are at least 7 to 8 ft long.
Can you add a tanning ledge to an existing pool?
Yes. On a concrete pool the shelf is formed with steel and gunite or shotcrete during a full resurfacing, and Blue Haven says it is rarely worth doing unless new plaster is already planned. On vinyl pools Latham ties it to a liner replacement. Fiberglass pools usually get a separate ledge shell set beside them.
How much does a tanning ledge cost?
River Pools prices a separate fiberglass ledge at $5,000 to $15,000 (2025) and gives $8,000 as the example for an 80 sq ft concrete ledge at $100 per sq ft. A Texas dealer lists Leisure Pools Topaz and Opal ledges at $22,372 and $22,572 without saying what is included. In-water chaises add $799 to $999 each.
Do fiberglass pools come with a tanning ledge?
Some do. Latham’s Tuscan Collection molds a ledge into five pool sizes, from the 11 ft 1 in x 20 ft 3 in Tuscan 11.20 holding 5,000 gallons to the 13 ft 9 in x 39 ft 11 in Tuscan 14.40 at 12,200 gallons. Others sell the ledge as a separate shell, such as Latham’s 10 in deep Rectangle.
Sources
- International Code Council. International Swimming Pool and Spa Code 2024, Chapter 2 Definitions (Austin adoption, UpCodes). Accessed 2026-10-08.
- International Code Council. International Swimming Pool and Spa Code 2024, Chapter 3 General Compliance (UpCodes). Accessed 2026-10-08.
- International Code Council. International Swimming Pool and Spa Code 2024, Chapter 8 Residential Swimming Pools (UpCodes). Accessed 2026-10-08.
- Pueblo County Department of Public Health and Environment. 2022 Pueblo County Model Aquatic Health Code (2018 MAHC, 3rd edition text). Accessed 2026-11-02.
- Maricopa County Environmental Services. Environmental Health Code Chapter VI Section XIV, Zero Depth Entry Pools. Accessed 2026-11-02.
- River Pools. How Deep Should a Tanning Ledge Be?. Accessed 2026-11-02.
- River Pools. Tanning Ledges (sizes, materials, installation and cost). Accessed 2026-11-02.
- River Pools. Fiberglass Tanning Ledge Add-Ons (TL09, TL15). Accessed 2026-11-02.
- Latham Pool Products. Tanning Ledge Options for Fiberglass and Vinyl Liner Pools. Accessed 2026-11-02.
- Latham Pool Products. Genesis/Synergy Semicircle Side tanning ledge. Accessed 2026-11-02.
- Latham Pool Products. Rectangle Tanning Ledge. Accessed 2026-11-02.
- Latham Pool Products. Semicircle Tanning Ledge. Accessed 2026-11-02.
- Latham Pool Products. The Tuscan Collection. Accessed 2026-11-02.
- Latham Pool Products. Compare Tanning Ledge Options for Your Swimming Pool (June 3, 2021). Accessed 2026-11-02.
- Latham Pool Products. Automatic Pool Covers: Price and Cost Factors. Accessed 2026-10-26.
- Leisure Pools USA. The Topaz tanning ledge. Accessed 2026-11-02.
- Leisure Pools USA. The Opal tanning ledge. Accessed 2026-11-02.
- San Juan Pools. Fiberglass pool and spa model list. Accessed 2026-11-02.
- Pools123. Swimming Pool Pricing (Leisure Pools models). Accessed 2026-10-27.
- Ledge Lounger. Signature Chaise. Accessed 2026-11-02.
- Ledge Lounger. Signature Chaise Deep and in-pool seating comparison. Accessed 2026-11-02.
- Blue Haven Pools. Add a Baja Shelf to an Existing Swimming Pool During a Remodel. Accessed 2026-11-02.
- Shasta Pools. How to Design a Tanning Ledge or Baja Shelf for Your Pool. Accessed 2026-11-02.
- Ecopool. Baja Ledge. Accessed 2026-11-02.
- BioGuard. Green Algae. Accessed 2026-10-27.
- HomeGuide. How Much Does Pool Resurfacing Cost?. Accessed 2026-10-26.
- LA Department of Building and Safety. Building Permits Issued 2020 to Present (pi9x-tg5x) and 2010 to 2019 (dyxf-7hc4). Accessed 2026-10-03.
- PC&S research. Average cost to build a pool: permit ledger (14 city and county open data sets). Accessed 2026-11-02.
Related pages
Get Quotes From Licensed Local Pool Pros
Tell us what you need and your ZIP code. We match you with pool companies that cover your area.